Recently got my MacBook Pro (Unibody) (With the specs below) and downloaded the 32bit version of Windows 7 and installed it via Boot Camp.
I cannot install drivers into Windows 7 somehow, it says that it is not Windows XP/Vista... : I tried the configuring it, it installed, but then the drivers still wouldn't work. (nVidia drivers?)
So i am trying to change my apple boot camp drivers to nvidia's, but i think i must have downloaded the wrong ones, or done something wrong. I tried to install Geforce/Ion driver release 192.62, (from nvidia's site, i selected gefore 8 series) and when i ran the setup it said: 'nvidia setup program could not locate any drivers that are compatible with your hardware' . My questions are:
� Which drivers should i download? a link would be great.
� Are there any pre-requisites i must do, such as install version 170 first?
I am using an iMac 24" with 4gb ram, 500gb 5400 rpm HDD, and 8800 GS 512mb.
The reason I am trying this, is because when i play some online games, i often get bad lag spikes, but that chat is still running. Someone recommended me to 'update my drivers'.
I have a Macbook plastic, 2.4 GHz intel core 2 Duo with 2 GB of ram.My Mac is currently running on OS X, i used to have a 40 gig partition Windows XP, a couple of friends of mine where talking about how much they liked Windows 7 and finally i had had enough blue screens to say, sure ill switch, why not?... assuming it would not take longer then lets say a day at most, i set off on my quest.
FWI, im running an older model Macbook that was bought refurbished (not sure if that has anything to do with my problem). anyway i removed my previous partition, then using Boot Camp Assistant i repartitioned a 40 gig section for Windows 7. Then ran the installer. I have a copy of Windows 7 ultimate 86x. The Windows boot screen turned up, i had to reformat the partition so that i could install, no problems there. after all said and done the installation worked perfectly, up to a point... First problem that appeared was the lack of sound. i fixed that by downloading Realtek's High Def sound drivers.
Then it was the rest of the drivers for the macbook. heres where i run into my problem, i have the Mac OSX install discs 1 and 2. inserting the first disc the option of the auto run of the setup popped up i clicked run. and instead of the same old install drivers option all i have is the option to install the software that lets macbook airs share cd/dvd drives... needless to say i got frustrated and to put it lightly pissed off...
unsure of wtf was going on i looked it up online and really couldnt find anyone with the same problem, i found a web page saying that i should have the windows auto update itself and that should fix the problem. it did not. i dont know what the hell is going on. and im about this close to reinstalling windows xp and telling windows 7 to go **** itself...
I've installed a legit copy of Windows XP, SP2. Nothing works, not my webcam, not my internet, not even the full resolution. The first time around that I did this, I had the DVD that came with my iMac, I installed the Windows drivers stuff off of it, and everything worked perfectly.
Can anyone point me in the direction of either a replacement for that DVD (.iso image or something?) or simply the required drivers that will let my iMac 8,1 connect to the web?
I searched for a while trying to find the answer but did not find it. I just installed Vista Business via Bootcamp. I am not able to access the internet or anything. If I read the help stuff right I need to use the OSX install disk to install the drivers. The problem is, I don't have the install disk. Is there any other way to get the drivers? Or am I just missing something easier?
View 5 Replies View RelatedOk, Here is the scoop. I am trying to get Wifi to work on my macbook while on XP. When I put in the disk and it says "The package requires a newer version of Windows Installer. Would you like to update?" I say yes and it says "The requires resoruce update is missing." and if I click no it says "The operation is aborted." or something.
View 10 Replies View RelatedI have just installed Windows 7 via bootcamp and everything went smoothly, the only problem is that i have lost my DVD of snow leopard and want to install the 3.2 drivers on windows 7, however it is to my understanding that i need to install 3.0 from the DVD first. Is there any way around this without ordering another copy of snow leopard? ?25 might not seem a lot but on a student budget i would rather not shell out.
View 1 Replies View RelatedI installed Windows with no problem. Now I need to install the drivers, aka the mac disc. There are 2 mac discs I had in my Macbook Pro package. I put in my first one. It was, surprisingly a blank CD. I put in my second one. It did show BOOTCAMP this time, but it only had the options 'Remote Install Mac OS X' and 'DVD or CD sharing'. I couldn't install them. What is wrong with this. I am certain that the package wasn't fake, since I have the Macbook Pro here, but why doesn't the install CDs work?
View 1 Replies View RelatedIs is worth it? I have 4 gigs of RAM and use bootcamp mainly for gaming (Fallout 3).
Will i be able to install the drivers on the OS X dvd?
I have mac drivers cd for installation on win XP drive. But any time I put in the cd to install the drivers it gives an error message and does not install.
View 4 Replies View Related1. New 11" macbook air. Set up partition for Windows XP SP2 using bootcamp. Prior to the Windows install I made the bootcamp driver install DVD per the instructions.
2. Windows installed fine. In Windows, went to install the bootcamp drivers from DVD I made and get this message: "bootcamp requires that your computer is running windows 7" And then I can't install the drivers.
Is there a limitation to running Windows 7 only?
I get the error "Another instance of this setup is already running. Please wait for the other instance to finish and then try again." when installing the Sigmatel drivers from the Boot Camp Driver installer.
I've reformatted, reinstalled Windows XP, and tried to install the Boot Camp drivers again but I still get the error.
I tried opening "SigmaTelXPSetup.exe" directly from the "Drivers" folder of the Leopard DVD, but I got the error again
How can I install these drivers to get sound?
Today is the day I get my new 09 Quad - very exciting! I have a copy of Vista Business 64bit, which I want to run because of the extra ram I'll have in that beast of a thing. Up until now I've just been using the other comps in my sig, and from what I've heard it's hard to get 64bit windows working in Boot Camp. But are there 64 bit drivers on the Leopard install disc to make this a bit more pain free?
View 3 Replies View RelatedI've installed XP SP3 for school use on my new uMBP but for some reason I cant the bootcamp drivers to install, I click setup.exe and it opens and says "The installer encountered errors before Bootcamp could be configured"
View 1 Replies View RelatedI've successfully installed windows professional 32bit onto my mac computer with bootcamp. When I insert my OS10.5 Leopard cd's into the computer windows will not detect the CD's. These are original CD's after trying to get it to work for a few mins I came up with an idea. I downloaded the 2.1 mac drivers from apple @ [URL]. I then burned the drivers onto a cd and then rebooted into windows. After copying the drivers from the cd to my harddrive, I tried to install the drivers that I had downloaded but nothing happens. I can see in the taskmanager that the BCUpdateXP.exe runs for a few seconds then does nothing. The mac is an iMac 8.1, intel core 2 duo, 2.66ghz, 2gb ram. The leopard cd's work when running the mac under Mac OSx 10.5.8 which would mean the cd's should be fine.
View 1 Replies View RelatedI've tried looking all over and am totally confused with what works with what and how to do it. I am looking at installing windows 7 x64 on either the lower spec 13inch macbook pro, or the lower spec 21.5inch imac. Installing windows 7 itself is so easy, but how do i get the drivers installed and which work? I know I should use the bootcamp drivers for vista off of the OS X disk but is it as simple as inserting the disk, navigating to the folder and running whatever? And does everything work for both the systems I mentioned? Including sound etc., and if not, how do I get it to work.
View 5 Replies View RelatedThe drivers that came with 3.1 are 188.61, the newest available on nVidia's site are 195.62. Is it safe for me to un-install the drivers that came with bootcamp and install the newest nVidia ones?
View 5 Replies View RelatedI finally got my HDD partitioned and BootCamp Assistant to work correctly, I insert my Windows 7 disc, and it starts installation, but then stops and says it needs CD/DVD drive drivers, and to please insert floppy/usb/cd/etc. with the drivers. However, I can't eject the CD to insert my Snow Leopard disc and can't find the drivers poking through the SL CD to put on an external or flash drive.
View 2 Replies View RelatedI can't get VMWare to install their tools that supposedly helps with the Win7 drivers. However, i have the Win7 drivers for my MBA from a previous attempt to install Boot Camp. They are in my MBA dowload/drivers folder and on a USB thumb drive. But the VMWare install won't look at either. It only wants to look in 3 places.
A: floppy drive (haven't had one in many years)
CD drive D: VMWare tools (which is no help at all)
Boot X: drive
So I installed xp via bootcamp just fine. One problem; no drivers! I inserted the OSX install DVD in, xp did not recognize it. Under 'properties' it said it was a blank cd with 0 megabytes on it and 0 megabytes of storage. If I opened the DVD there was nothing there. I did get this CD from someone else, it is the 'official' OSX Snow Leopard DVD copied onto another cd, but theoretically everything is there. I am running a non unibody macbook pro 15", might I be able to download these drivers elsewhere?
View 4 Replies View RelatedI have a late 2008 (the brand new) Macbook Pro 2.53 C2D and I installed vista on a partition succesffuly. But once I try to install Boot Camp drivers, it doesn't work. I open up the leopard DVD, and it starts installing all the network cards and video cards, but then it gets to "KeyAgent" and it says it failed to install because I it couldn't access startup services. I pressed ignore, then it came to "MacHal" (i think, somehting like that) and it said the same thing. I looked under my account privelges, and I'm an administrator with access to everything, so I'm not sure what's going on.
View 13 Replies View RelatedI've installed Windows 7 64 Bit. I tried installing Boot Camp from the Leopard DVD and it gets to the part where its trying to run the service KeyAgent but it fails. This is the message I get.
"Service 'KeyAgent' (KeyAgent) failed to start. Verify that you have sufficient privileges to start system services."
I've tried running it in compatibility mode for Vista and made sure to have it set as run as Administrator. I also download BootCamp 2.1 for Windows Vista 64 but it wont even start. I also did the Compatibility mode and administrator for it.
- First Disk named Applications install DVD
- Second Disk Mac OS X install DVD
I'm new to macs. Which one it would really help.
So I finally got around to installing the boot camp 3.0 drivers from my SL cd; however, I keep getting this error in which the installer refuses to install the new boot camp drivers. I'm running the 2.1 drivers just fine. The error I get is:
"The installer encountered errors before Boot Camp could be configured"
I'm going to try to uninstall the 2.1 drivers and see if I can install the 3.0 again, but I doubt it will work. Others have had this issue:
[URL]
Has anyone else run into this? I'm running XP sp3. I think this may be an sp3 issue, but I'm not sure how to get around this. I could manually install the 3.0 drivers, but how do I know which ones to choose? Can someone possibly list the drivers on the SL cd that I need to install manually? (I have a late 2009 2.8ghz 15'' unibody macbook pro.
So I've finally got all the partitions sorted out from my previous OS setup, and go to install Windows 7. Partway through the setup (just after asking language) it asks for CD/DVD drivers. Okay, I'll try eject the disk. Nope, eject key not working. So I can't put the disk with all the drivers in. I'll copy the drivers to my external HDD. When I browse for them, I am told there's nothing there. So, I don't know. I can't install the drivers it would seem (unless someone can find the CD/DVD drivers for windows?) and therefor cannot continue with the installation because it wont let me click next until these damn drivers are installed. Windows 7 64 bit, by the way.
View 4 Replies View RelatedIS there anywhere else i can get the windows drivers for mac hardware other than the leopard install disk?
View 3 Replies View RelatedSo I am putting Windows 7 on my MBP, so I can play FFXIV, and I noticed I don't have the install disk for my MBP, so that I can install the drivers for the laptop. Is there somewhere I can download these onto a USB and then install them in WIN 7 from my USB drive?
View 2 Replies View RelatedI've successfully installed XP on my Macbook (Late 2009) and now need to install the drivers to get Network connectivity etc. However I don't have my mac disc at hand as I am away travelling at the moment. Can I download the drivers either from my mac or from the internet to USB, then transfer and install them into XP? I have the latest version of OSX and am up-to-date with everything afaik. Running XP Pro SP 3.
View 15 Replies View RelatedI've tried to install the network drivers via the original disk that came with my computer, the bootcamp 2.1 disks, and even the HP Broadcom drivers, where none of them worked, does anyone have any ideas on how to solve this problem, Ethernet works perfectly btw.
View 5 Replies View RelatedI installed Windows 7 on a Mac Pro 09 and now I�m not sure if I really need the Boot Camp 3 drivers or not. It�s just installed for games and 3D Software. I don�t have an USB iSight, obviously, and don�t need the media function keys of the keyboard nor I use the Mighty Mouse. Also I don�t need iDisk access HFS+ access or Bonjour and what so ever. I mostly run OSX anyway.
So, would it work if I just install the Chipset drivers, Audio, Ethernet and graphics card drivers if I find them?
Or do the Boot Camp drivers have special stuff which I absolutely need?
