Finished up running boot camp, but when trying to install the drivers windows fails to find any .exe file or any files for that matter on the Mac OS X install disc 1 or 2. How can I install the drivers to finish installation? Should I just burn a drivers CD and run it in windows instead of using the OSX disc?
View 13 RepliesToday is the day I get my new 09 Quad - very exciting! I have a copy of Vista Business 64bit, which I want to run because of the extra ram I'll have in that beast of a thing. Up until now I've just been using the other comps in my sig, and from what I've heard it's hard to get 64bit windows working in Boot Camp. But are there 64 bit drivers on the Leopard install disc to make this a bit more pain free?
View 3 Replies View RelatedDoes the disc that comes with a 2010 mbp i5 have windows 7 drivers? if so, what about 64-bit? One last question, what format should I partition the windows sector?
View 4 Replies View RelatedI've been trying on and off for the past two years to install Windows on my Mid-Late 2008 MBP (C2D,10.5.8). The first time I tried it, I partitioned fine, got XP installed and went to install drivers from my OSX disc, but there were some errors and I couldn't get the trackpad/other essential drivers installed, even when I downloaded the drivers direct and put them on via USB or from the Mac partition. So I tried again a few months after having deleted the partition, but this time I couldn't partition it properly.
I just purchased the SL upgrade disc and I'm now thinking of putting Windows 7 on this. This prompts a few questions that I hope you guys can answer.
1. I'm pretty sure the answer is yes, but just to check, will 64-bit Windows 7 work on my computer?
2. Will the drivers included on the 10.6 upgrade disc be sufficient to install Windows, or will I need my original install disc (which would be a pain to get)?
3. I'm getting Windows 7 through one of my school's programs, and it'll be an .iso. Obviously if I just burn this to a disc it should suffice, but will it cause any problems with the installation via bootcamp? As far as I know, unless my school's been doing some shady business it's legitimate.me!
So I installed xp via bootcamp just fine. One problem; no drivers! I inserted the OSX install DVD in, xp did not recognize it. Under 'properties' it said it was a blank cd with 0 megabytes on it and 0 megabytes of storage. If I opened the DVD there was nothing there. I did get this CD from someone else, it is the 'official' OSX Snow Leopard DVD copied onto another cd, but theoretically everything is there. I am running a non unibody macbook pro 15", might I be able to download these drivers elsewhere?
View 4 Replies View RelatedI've installed Windows XP with Service Pack 2 a couple days ago - figured out the drivers stuff and finally the OS X disc ran flawlessly, installed most of the drivers for internet, audio and isight, whatever. I thought it's done so I installed GTA: Vice City on my Windows XP - when I tried launching the game, it gave me an error stating 'Couldn't find enough video memory'.
So I went to Start>Run and typed in dxdiag which opens the DirectX Diagnostic Tool. I went to 'Display' and found out that the category under 'Device' is completely blank with DirectDraw Acceleration and Direct3D Acceleration stating 'Not Available'. Am I missing out the graphic driver or something? Anyone here explains it and provide a link where to install these required drivers. By the way, I've tried installing the driver off NVIDIA's site but still it turns out funny.
Using iMac 10.5.6 - 2.66 GHz - NVIDIA GeForce 9400M.
I installed Windows XP on my MBA and then I tried to get the restore disc to install the drivers and I can't find it anywhere. Does anyone know where I can get the drivers I need?
View 2 Replies View RelatedI installed Windows with no problem. Now I need to install the drivers, aka the mac disc. There are 2 mac discs I had in my Macbook Pro package. I put in my first one. It was, surprisingly a blank CD. I put in my second one. It did show BOOTCAMP this time, but it only had the options 'Remote Install Mac OS X' and 'DVD or CD sharing'. I couldn't install them. What is wrong with this. I am certain that the package wasn't fake, since I have the Macbook Pro here, but why doesn't the install CDs work?
View 1 Replies View RelatedI recently installed the 64 bit Windows 7 Ultimate operating system onto my MacBook Pro 13 inch. I have the most basic Macbook Pro 13 inch with nothing fancy added. Whenever I load up the Windows 7 OS on my Macbook, it never utilizes or even realizes that I have the NVIDIA graphics card in my laptop. It instead believes I have some integrated graphics card that cannot even run the most basic of PC games. I know my laptop can run these games because on OSX it runs multiple games with higher requirements than these games I am trying to run on Windows.
Basic question: How do I get bootcamp or whatever else to make Windows 7 realize I have a NVIDIA card and drivers. Sorry if I am coming off as stupid or confusing.
So i am trying to change my apple boot camp drivers to nvidia's, but i think i must have downloaded the wrong ones, or done something wrong. I tried to install Geforce/Ion driver release 192.62, (from nvidia's site, i selected gefore 8 series) and when i ran the setup it said: 'nvidia setup program could not locate any drivers that are compatible with your hardware' . My questions are:
� Which drivers should i download? a link would be great.
� Are there any pre-requisites i must do, such as install version 170 first?
I am using an iMac 24" with 4gb ram, 500gb 5400 rpm HDD, and 8800 GS 512mb.
The reason I am trying this, is because when i play some online games, i often get bad lag spikes, but that chat is still running. Someone recommended me to 'update my drivers'.
I have a Macbook plastic, 2.4 GHz intel core 2 Duo with 2 GB of ram.My Mac is currently running on OS X, i used to have a 40 gig partition Windows XP, a couple of friends of mine where talking about how much they liked Windows 7 and finally i had had enough blue screens to say, sure ill switch, why not?... assuming it would not take longer then lets say a day at most, i set off on my quest.
FWI, im running an older model Macbook that was bought refurbished (not sure if that has anything to do with my problem). anyway i removed my previous partition, then using Boot Camp Assistant i repartitioned a 40 gig section for Windows 7. Then ran the installer. I have a copy of Windows 7 ultimate 86x. The Windows boot screen turned up, i had to reformat the partition so that i could install, no problems there. after all said and done the installation worked perfectly, up to a point... First problem that appeared was the lack of sound. i fixed that by downloading Realtek's High Def sound drivers.
Then it was the rest of the drivers for the macbook. heres where i run into my problem, i have the Mac OSX install discs 1 and 2. inserting the first disc the option of the auto run of the setup popped up i clicked run. and instead of the same old install drivers option all i have is the option to install the software that lets macbook airs share cd/dvd drives... needless to say i got frustrated and to put it lightly pissed off...
unsure of wtf was going on i looked it up online and really couldnt find anyone with the same problem, i found a web page saying that i should have the windows auto update itself and that should fix the problem. it did not. i dont know what the hell is going on. and im about this close to reinstalling windows xp and telling windows 7 to go **** itself...
I can't find the answers I know its been asked before.
Its the 2010 MBP 13"
I have Windows 7 Professional 64bit running through parallels 5 and it seems to be missing alot of drivers (wireless most importantly, but also audio etc). Where can I get these, is it the same as bootcamp drivers( are they on one of the disks that come with macs?).
I've installed a legit copy of Windows XP, SP2. Nothing works, not my webcam, not my internet, not even the full resolution. The first time around that I did this, I had the DVD that came with my iMac, I installed the Windows drivers stuff off of it, and everything worked perfectly.
Can anyone point me in the direction of either a replacement for that DVD (.iso image or something?) or simply the required drivers that will let my iMac 8,1 connect to the web?
I boot camped my Macbook Unibody 13" (bought early 2009) with windows 7. However the bootcamp version was 2.0. I now cannot get drivers from the 3.0 bootcamp update.
View 2 Replies View RelatedRecently purchased a Samsung DVDWBD SH-B083L Blu Ray Optical Drive for my Mac Pro, second bay. I have the 2.26 Nahalem Mac, 8-Core. This drive is unresponsive with Blu Ray discs. It plays regular DVD fine, but nothing with Blu Ray. I believe I need the proper drivers but not sure. Does the drive need formatted? How do you do this? After searching the web, I can't seem to find Mac drivers for this drive. Maybe I'm not looking hard enough, maybe they are not there.
View 21 Replies View RelatedI just got a powerbook 667Mhz DVI yesterday. It has 10.3 on it with a bunch of apps and stuff pre-installed. But when I launch some of the apps, it freezes. So I want to just get 10.4 and install it and start fresh. But do I need a special powerbook install disc, or can I just go out and buy the newest standard OSX version, which will include all the drivers that I would need for it?
View 11 Replies View RelatedPlease take pity on a confused newbie. I'm running 10.4.11 (Tiger) on a 2 GHz Intel Core 2 Duo 13" Macbook with 1GB ram. My school requires me to run Bootcamp to take my exams. They told us that we need 10.5 minimum OS and must have our 'original system discs'. The installation dics that I have are for Tiger. If I buy an upgrade disc to Leopard/SL, will that contain the windows drivers I need to install after I install bootcamp? Or do I need to buy a full installation disc of Snow Leopard (since I think you can't buy the Leopard full installation anymore)? Another issue someone mentioned is that both Leopard & SL require 1BG ram minimum, which is what I have. I'm worried the os will run very slow, but I don't really have the money to buy new ram and get it install (and don't want to crack the fragile top case) now that I have to buy the new software too.
View 7 Replies View RelatedOk, Here is the scoop. I am trying to get Wifi to work on my macbook while on XP. When I put in the disk and it says "The package requires a newer version of Windows Installer. Would you like to update?" I say yes and it says "The requires resoruce update is missing." and if I click no it says "The operation is aborted." or something.
View 10 Replies View Related1 - I have an early 2008 iMac 24" and ordered Snow Leopard disc from Apple
2 - After installation of Win7 64 bit and problems with boot camp 3.1 drivers support then tells me my computer will not run windows 7 64 bit and sends me a list of non-compatibles. Sure enough mine is one.
3 - Several respondents help me and it appears that 64 bit will run but still trouble with keyboard/mouse.4 - uninstall 64 bit and install 32 bit and related boot camp drivers5 - numeric keypad on apple keyboard still does not work with office 20106 - just tried to update drivers for win 32 but it says more current ones are installed??? I guess that is from the attempt to install 3.1 for win 64 unsuccessfully?7 - Now support lists computers that will not run windows 7 and mine is not on that list.
right now i'd be a happy camper if someone could just tell me how to get the Apple keyboard that came with my iMac and the numeric keypad working when in Windows or Office.
I have just installed Windows 7 via bootcamp and everything went smoothly, the only problem is that i have lost my DVD of snow leopard and want to install the 3.2 drivers on windows 7, however it is to my understanding that i need to install 3.0 from the DVD first. Is there any way around this without ordering another copy of snow leopard? ?25 might not seem a lot but on a student budget i would rather not shell out.
View 1 Replies View RelatedSo i installed windows 7 on my macbook (not aluminum) and when i go to install the boot camp drivers off of the retail leopard CD i get an error that says that I can't because it only installs on vista or XP. My laptop came with Tiger CD's so i can't get them off of there.
View 1 Replies View RelatedI recently installed Windows vista using going through parallels because my bootcamp failed a while ago. This partition also acts as my bootcamp. Well The internet on parallels works fine because it is using osx network, but when i boot into bootcamp the network drivers seem to be missing. I cant figure it out, but it says the ethernet and network drivers are not there. I cant find the drivers on the internet anywhere and when i use the vista disk i have it still does not want to install them.
View 2 Replies View RelatedHaving problems with the Audio, Brightness and eject button keys after windows xp automatic update. Buttons sometimes work after a shutdown and restart, sometimes not. Tried the Bootcamp 2.1 reinstall but didnt help much. Where the heck can i get drivers for the bloody thing?
Apologies for the lingo but im quite frustrated. it takes apple yrs to fix one problem but only for another to appear.
I already gave up on Realtek doing something about their crappy sound quality (despite releasing a new driver every two weeks) and the mighty mouse freezing after hibernation unless u press the left button like a man possesed!!
Apologies if there are other specific threads like this, I did do an MRoogle search but couldn't find one.I've just got a new 15" 2.66ghz i7 MacBook Pro, and have Windows 7 64 bit ready to install. My question is, once I have it installed, with all the Snow Leopard drivers and 3.1 update, should I continue to download drivers from the manufacturers's websites, or just stick to the ones that Apple hands out in their updates?I suppose I'm specifically asking about the NVIDIA drivers. Should I install the most recent drivers for the 330m, or again just stick to the Apple ones?
View 3 Replies View RelatedI'm not convinced that the drivers that Apple provides, even if they come from the hardware manufacturers, are as good as they could be. The reason why I say this is that, prior to installing Snow Leopard and Boot Camp 3.0, I had been playing Dawn of War 2 on an ageing MacBook Pro with an ATI X1600 chipset under Windows 7. What I found odd was that after I had reinstalled Windows 7 and used the Snow Leopard DVD to install the Boot Camp 3.0 drivers was that Dawn Of War started to complain that my display drivers were incompatible with the game. Figuring that I hadn't had this problem before I uninstalled the display drivers Apple provided (from ATI) via the Device Manager, restarted Windows and let Windows Update find drivers instead (again, from ATI). This seems to have sorted out the problem.
If you are having problems with drivers then perhaps letting Windows Update try to find them may be the answer as this seems to have worked in my case.
I'm trying to install the 168.81 ForceWare drivers for my 9600M GT (256MB) in Windows 7 x64. The drivers from Boot Camp on the Snow Leopard DVD installed fine. I want 168.81 because I always like to have the latest drivers for everything.
Anyway, when installing it, it says something about not having the required hardware and it won't install.
Is the Boot Camp drivers the only way of having the latest drivers.
I recently got a windows 7 home premium, my macbook pro is a 2.4 ghz core 2 duo, 256 mb 8600m gt, 4 gb ddr2 667 mhz ram, 15.4, but I cant find drivers for it anywhere, Im running snow leopard 10.6.2 and boot camp 3.00.1(software update wont get it to 3.1) I install windows then I try to find drivers but I cant, the guy who sold it to me didnt give me the snow leopard cd now I need to find drivers for it
View 1 Replies View RelatedSo I got windows 7 installed on my 2010 mbp but when I went to install my windows drivers via my Mac osx disc I realixed I couldnbt find it.
Is there anyway to install all the drivers/apple software without my OSX disc? If not, how do I go about getting a replacement disc from apple?
We'll after a mamouth effort today which had me thinking that I'd bricked my Mac, I've finally got Windows 7 installing throught using refit, bootcamp didn't want to work with my external dvd drive.
Where do I get the native bootcamp drivers to ensure my mac works properly in Windows mode? Are they on the Snow Leopard disk ? I recall in the past in the past that bootcamp used to make the drivers for you and burn them onto a CD but wasn't able to get past the partition stage, so don't know what the process is?
The graphics driver is the most important, I'm using one of the intel core duo original imacs, so I think its ATI.
Also any ideas where I can obtain a osx tool for managing partitions, I was showing about 5 partitions on the windows install, so would like to clean things up a little?
Ive been loving this Macbook Pro 2.66ghz so I decided to get back into gaming. I installed my Windows 7 beta(Build 7000) and then installed Crysis. Now, when windows 7 got done installing it did "windows" updates and installed a Nvidia driver update. My question is this, are their any other drivers that I need for graphics or gaming? Also, what general settings are used for crysis on this model? And last is their any way I can get sound working correctly? It wont work for some reason and I have lost my button controls.
