Windows On Mac :: Naming Multiple Boot Camp Partitions
Feb 9, 2010
for various reasons, I've got three windows partitions on my Mac Pro. 1 x XP, 1 x Vista and 1 x 7. The annoying thing is, when I hold 'alt' to get into one of them, they all show up as 'Windows' (ie, OSX, Windows, Windows, Windows as my choice). A smarter man would remember, or write down what's what - but I'm wondering (as I'm not smarter) if there's a way to rename how they appear in this startup point. I've renamed the drives on the desktop so I know what's what - but it'd be nice to be able to change the startup option too.
I am not sure if there is anything I can do, but here is my situation.Boot Camp will not install if my main hard drive which contains OSX has more than 1 partition on it. I have previously successfully installed boot camp before but recently have reformated and repartitioned my drive into multiple sections, One for the OSX and one for Multimedia, Movies Music and pics.Now Boot camp is telling me, Boot Camp cannot install because your primary drive is partitioned.So My prediciment is this. I want boot camp, because I need windows for games... no problem. However I need an extra OSX Journaled Partition for my Music and stuff, because I do not want this on my OSX partition. what can I do? before I reformat again
been trying to set up something like this under bootcamp butgetting nowhere. even lost half of my mac hd in the process.support couldn't get disk utility to recover it. finally got itback with a linux live disk called 'parted magic.' that allowedme to delete the ntfs partitions and leave them as free space. once i'd done that disk utility could then resize the mac hdpartition to the whole disk and i was able to start over.can a partition scheme as i've described above be done on a mac?
I have a MacBook Pro with Snow Leopard, and Windows 7 Premium installed via Boot Camp v3.0 (equal 64GB partitions on a 128GB SSD). Both OS�s are running fast and smoothly without any major issues � except for the following:
-When I am logged into Snow Leopard, I can open and access all the folders and files for all users on the Windows 7 partition (but you cannot write to them).
-When I am logged into Windows 7, I can open and access all the folders and files for all users on the Snow Leopard partition (but you cannot write to them).
I created 4 profiles/users in OS X; when I installed Boot Camp, it was in my wife's profile (she will be the primary user). My son went into his profile last night to use Garageband and I noticed there was no Windows disk on his desktop, nor was the Fusion icon on his dock.
So, can you/should you install Boot Camp for more than 1 user in OS X?
how to make a boot camp installation with three partitions?
I mean one for mac, one for windows and one for data to be shared between the OS's? When I try to create 3 partitions on leopard installation, when I start the boot camp assistant, it doesn't work. Or when I create an extra partition inside windows, mac is not able to see it.
I just got my first Mac computer (yay), but as I always do with new operating systems, I have already run into a few problems. I tried to use Boot Camp to install Windows XP, and it all went through, but after the installation somehow the XP system was deleted and now I have 2 Mac OS 10 partitions.Um, I'm sorta lost at this point. Since I just got my Macbook Pro today, I don't have any files on it except for 24 music files. I am currently reinstalling the operating system onto the Macintosh HD, but I'm not sure if that will relieve the problem.
In retrospect, I should have ignored it when Apple Software Update told me about the Boot Camp 3.2 upgrade for my 2006 Mac Pro running x64 Win 7 ultimate. When I ran it, it overwrote my blue tooth driver and my keyboard stopped working. Thanks for the folks at Mac Rumors forums, I was able to go through the procedure to get it working again, and I also had to update the video driver (again) from ATI for my 3800.
So then I decide to reboot into MacOS and discover that my icon for selecting the boot disk was gone, not to mention any directory or programs in the start menu. This happen to anyone else? Do I have to downgrade to 3.1 or does anyone have a recommendation to get 3.2 working?
Just a quick rundown of what I'm trying to do here:I have a 1 TB external USB SimpleDrive hard drive that is currently partitioned into three partitions, two formatted with FAT32 and one formatted with HFS+ for Time Machine. I learned how to enable Mac OS X 10.6 Snow Leopard's NTFS read-write capability today and so I no longer need to keep my first two partitions as FAT32 (especially since I have files larger than 4 GB I would like to store on them). I have data on the first FAT32 partition that I would like to transfer to the second FAT32 partition once I have reformatted it as NTFS whereby I will then be able to reformat the first FAT32 partition to NTFS without losing my data.I have nothing important on the second FAT32 partition, but when I opened Disk Management in Administrative Tools in Windows 7, I found that the second FAT32 partition is currently set as the active partition of that volume. When I right-clicked and asked to Format that partition exclusively, I received the following
In my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
This should be possible, but I'm not sure what the procedure is to make this work. I'd like to have a OS X partition, Vista partition and a XP partition, and boot between them.
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
Have the new 15" MBP with i7 Processor. I had another MBP with a 7200RPM drive and installed drive in the new i7 Mac. Computer was working fine until I installed Windows via Boot Camp. I can't boot to the Mac Partition any more, the partition is there but when you try to boot to it you just see the Apple logo and NO circle. I cannot boot to the install CDs or a bootable external drive. I target disk mode the computer and used another computer to boot using the drive in the i7 unit and it's fine and I can see all the information. I tried booting the i7 into single user mode and saw the following message:
I just installed Windows XP to a Boot Camp Partition on my MBP. However, rebooting is a hassle and naturally I want to avoid doing such as often as possible. I think running Parallels Desktop would suit my needs quite well. But here's the catch: I want to be able to use one partition to serve both of those needs. In other words I want have the option of booting through both Boot Camp or Parallels.
How would I go about doing this? I already have a XP installed via Boot Camp. So if there is a method where I don't have to reinstall, great, but I am fine with deleting stuff.
I just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP. I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition? Which is better and why? Also, how much memory should I allocate to Parallels/Windows XP?
Last night I installed VMWare Fusion and Windows 7 on my Unibody MBP running SL. When I use Fusion, my computer slows to a crawl. I spent a few hours getting Windows set up and installing software last night.
I would like to try using Boot Camp instead, but do not want to lose all of the software and files that I have installed. Is it possible to set up Boot Camp, and keep the same Windows setup?
hi! i'm planning to install windows 7 64-bit in my mbp, problem is i looked at the requirements needed and it stated that i needed boot camp update 3.1. i checked my boot camp version and it stated that i had 3.0.1, tried using software update, but states that i had no updates available. what should i do? and what else do i have to keep in mind while installing windows using boot camp. thanks in advance!
I use to be able to select the vista partition to restart into from the configuration pages in leopard on my macbook pro, but now my bootcamp partition is missing. I have to hold the option button to manually select the windows partition and then load into windows. Some setting somewhere must be lost. Does anyone know how to restore it?
This is my first post here... even though, I've read a lot of the things on this forum, but never decided to post a question 'til now... now that i bought a macbook pro that is.
Actually I have some sort of annoyance with boot camp. It works as it's intended (with windows 7, which is a miracle, because everyone complains about that combination). But whenever I boot up and press "alt" to select the hard drive i want to boot, it always shows Windows. Can i change it for something else? and, how can I do it? Both of my partitions have names of their own... they're not generic... but still, they are not working, what can I do??
I'm trying to install Windows 7 and can't get the boot camp assistant to partition my drive. The drive in question is 500GB with over 200GB free space. I want a Windows partition of 35-40GB.On first attempt I kept getting the cannot move files error when trying to partition. I read up on the error online, and most people suggested issues with parallels or needing to use idefrag. I had parallels on my machine at one point, but am not sure if there are any problem folders still hiding somewhere. Any tips on that part?I ran idefrag overnight last night. When I booted the machine up this morning, I launched it again to verify that the disk was defraged. Boot camp still doesn't want to play.
I have a Macbook Pro and I'm hoping to install Windows Vista via Boot Camp. Is it possible to do this with a Dell reinstallation DVD that came with my Dell laptop?
1 - I have an early 2008 iMac 24" and ordered Snow Leopard disc from Apple 2 - After installation of Win7 64 bit and problems with boot camp 3.1 drivers support then tells me my computer will not run windows 7 64 bit and sends me a list of non-compatibles. Sure enough mine is one.
3 - Several respondents help me and it appears that 64 bit will run but still trouble with keyboard/mouse.4 - uninstall 64 bit and install 32 bit and related boot camp drivers5 - numeric keypad on apple keyboard still does not work with office 20106 - just tried to update drivers for win 32 but it says more current ones are installed??? I guess that is from the attempt to install 3.1 for win 64 unsuccessfully?7 - Now support lists computers that will not run windows 7 and mine is not on that list.
right now i'd be a happy camper if someone could just tell me how to get the Apple keyboard that came with my iMac and the numeric keypad working when in Windows or Office.
On Windows I noticed there was an icon in the bottom right (next to the clock) that I could right click and then restart in Mac OS X. Is there a similar thing for OS X that I can just click in the menu bar and restart in Windows?
So i installed windows 7 on my macbook (not aluminum) and when i go to install the boot camp drivers off of the retail leopard CD i get an error that says that I can't because it only installs on vista or XP. My laptop came with Tiger CD's so i can't get them off of there.
I am trying to set up a Parallels 4 VM for a Windows 7 x64 Build 7000 boot camp partition, but parallels tools will not install. Half way through the process, a windows unsigned driver security box pops up, and when I tell it to install anyway, it still rolls back the installation process and I get the message "An error has occured while installing parallels tools, click OK to restart your computer and try again." or something to that effect. I have tried this about 15 times, and I have tried uninstalling/deleting the VM and re-creating the VM to no avail.
What I want to know: Is there a way to manually install Parallels Tools while running in the boot camp partition, just like installing any other application? I want to install it outside of Parallels, since for some reason it keeps screwing itself up when trying to set up the drivers as a VM.
I was able to get Windows Vista 64 running on my 17" MBP, it is pretty slick. I set aside 32 GB for Windows, ran the install, loaded all the appropriate Boot Camp drivers and everything is working perfectly in Windows. I boot back to OS X to attempt to configure Parallels...
So I fired up Parallels and follow the guided instructions. However, when I get to step 2 Im not sure what I should be doing. I already have Windows on its own partition, but Parallels is asking me for a CD/DVD image. Im a little leery of putting the Win disc back in, I dont want Parallels to always want to boot from the disc. how do I tell Parallels to load Windows as a Virtual Machine off of the Boot Camp partition?
The partition Boot Camp created now appears on my Desktop in OS X as Untitled, I can not, for the life of me, figure out how to change that. If I eject that volume will I still be able to Boot to Windows? Will Parallel still work?
