Windows On Mac :: MacBook Keeps Trying To Boot From CD?
Feb 11, 2010
My MacBook is refusing to boot from the hard drive. I went to do the Boot Camp process to install Windows 7, and of course my dumbass didn't print out the 13 page instructions or read them. So I partitioned my hard drive, then put in the Windows 7 disc. After that, boot camp didn't do anything. So of course I was stupid enough as to restart my MacBook and try to boot up from the optical drive by holding down "c."
When it finished the only thing that came up is a black screen with a 1. and a 2. and it says "Select CD-ROM Boot Type: _ " I can't get past that. I tried restarting and holding down "d," but that didn't work..
View 2 Replies
ADVERTISEMENT
Jul 14, 2009
In my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
View 9 Replies
View Related
Nov 9, 2009
I have an '08 Octo 2.8.
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
View 3 Replies
View Related
Dec 25, 2008
This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
View 4 Replies
View Related
Feb 18, 2010
I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
View 15 Replies
View Related
Feb 19, 2010
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
View 3 Replies
View Related
Jul 6, 2010
Have the new 15" MBP with i7 Processor. I had another MBP with a 7200RPM drive and installed drive in the new i7 Mac. Computer was working fine until I installed Windows via Boot Camp. I can't boot to the Mac Partition any more, the partition is there but when you try to boot to it you just see the Apple logo and NO circle. I cannot boot to the install CDs or a bootable external drive. I target disk mode the computer and used another computer to boot using the drive in the i7 unit and it's fine and I can see all the information. I tried booting the i7 into single user mode and saw the following message:
efiboot loaded from device: Acpi(PNP0A03,0)/Pci(1|1)/Ata(Primary,Master)/HD(Part 2,Sig********-****-****-****-************)
boot file path: SystemLibraryCoreServicesoot.efi
.Loading 'mach_kernel'...
................................................................................
View 6 Replies
View Related
Jul 20, 2009
I just installed Windows XP to a Boot Camp Partition on my MBP. However, rebooting is a hassle and naturally I want to avoid doing such as often as possible. I think running Parallels Desktop would suit my needs quite well. But here's the catch: I want to be able to use one partition to serve both of those needs. In other words I want have the option of booting through both Boot Camp or Parallels.
How would I go about doing this? I already have a XP installed via Boot Camp. So if there is a method where I don't have to reinstall, great, but I am fine with deleting stuff.
View 4 Replies
View Related
Sep 15, 2009
I just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP. I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition? Which is better and why? Also, how much memory should I allocate to Parallels/Windows XP?
View 4 Replies
View Related
Oct 24, 2009
Last night I installed VMWare Fusion and Windows 7 on my Unibody MBP running SL. When I use Fusion, my computer slows to a crawl. I spent a few hours getting Windows set up and installing software last night.
I would like to try using Boot Camp instead, but do not want to lose all of the software and files that I have installed. Is it possible to set up Boot Camp, and keep the same Windows setup?
View 8 Replies
View Related
Jul 26, 2010
hi! i'm planning to install windows 7 64-bit in my mbp, problem is i looked at the requirements needed and it stated that i needed boot camp update 3.1. i checked my boot camp version and it stated that i had 3.0.1, tried using software update, but states that i had no updates available. what should i do? and what else do i have to keep in mind while installing windows using boot camp. thanks in advance!
View 1 Replies
View Related
Mar 26, 2009
I burned numerous dvd's with my old Toshiba laptop for all of my videos and such with Windows XP. Now after my Toshiba crapped out and I switched to a Mac I was wondering why when I put the DVD into the laptop (MacBook Pro Intel processor) why I can only see the name of the dvd and not the contents. I hope someone can help me since I hate having to boot up Windows in Parallels and then play using Windows or drag it to my mac partition since this takes time and I just really hate having to see Windows load on my Mac. Anyones help is greatly appreciated.
View 1 Replies
View Related
Feb 15, 2009
I use to be able to select the vista partition to restart into from the configuration pages in leopard on my macbook pro, but now my bootcamp partition is missing. I have to hold the option button to manually select the windows partition and then load into windows. Some setting somewhere must be lost. Does anyone know how to restore it?
View 2 Replies
View Related
Nov 12, 2009
This is my first post here... even though, I've read a lot of the things on this forum, but never decided to post a question 'til now... now that i bought a macbook pro that is.
Actually I have some sort of annoyance with boot camp. It works as it's intended (with windows 7, which is a miracle, because everyone complains about that combination). But whenever I boot up and press "alt" to select the hard drive i want to boot, it always shows Windows. Can i change it for something else? and, how can I do it? Both of my partitions have names of their own... they're not generic... but still, they are not working, what can I do??
View 4 Replies
View Related
Dec 15, 2009
I'm trying to install Windows 7 and can't get the boot camp assistant to partition my drive. The drive in question is 500GB with over 200GB free space. I want a Windows partition of 35-40GB.On first attempt I kept getting the cannot move files error when trying to partition. I read up on the error online, and most people suggested issues with parallels or needing to use idefrag. I had parallels on my machine at one point, but am not sure if there are any problem folders still hiding somewhere. Any tips on that part?I ran idefrag overnight last night. When I booted the machine up this morning, I launched it again to verify that the disk was defraged. Boot camp still doesn't want to play.
View 8 Replies
View Related
Jan 20, 2010
Would have checked this myself but I haven't gotten around to installing Boot Camp 3.1 yet.
Anyone with a uMBP try to see if Boot Camp 3.1 allows the keyboard light to completely shut off in Windows 7?
I described it more here.
View 10 Replies
View Related
May 22, 2010
I have a Macbook Pro and I'm hoping to install Windows Vista via Boot Camp. Is it possible to do this with a Dell reinstallation DVD that came with my Dell laptop?
View 4 Replies
View Related
Jul 11, 2010
1 - I have an early 2008 iMac 24" and ordered Snow Leopard disc from Apple
2 - After installation of Win7 64 bit and problems with boot camp 3.1 drivers support then tells me my computer will not run windows 7 64 bit and sends me a list of non-compatibles. Sure enough mine is one.
3 - Several respondents help me and it appears that 64 bit will run but still trouble with keyboard/mouse.4 - uninstall 64 bit and install 32 bit and related boot camp drivers5 - numeric keypad on apple keyboard still does not work with office 20106 - just tried to update drivers for win 32 but it says more current ones are installed??? I guess that is from the attempt to install 3.1 for win 64 unsuccessfully?7 - Now support lists computers that will not run windows 7 and mine is not on that list.
right now i'd be a happy camper if someone could just tell me how to get the Apple keyboard that came with my iMac and the numeric keypad working when in Windows or Office.
View 2 Replies
View Related
Sep 19, 2007
On Windows I noticed there was an icon in the bottom right (next to the clock) that I could right click and then restart in Mac OS X. Is there a similar thing for OS X that I can just click in the menu bar and restart in Windows?
View 20 Replies
View Related
Feb 15, 2009
So i installed windows 7 on my macbook (not aluminum) and when i go to install the boot camp drivers off of the retail leopard CD i get an error that says that I can't because it only installs on vista or XP. My laptop came with Tiger CD's so i can't get them off of there.
View 1 Replies
View Related
Mar 2, 2009
I am trying to set up a Parallels 4 VM for a Windows 7 x64 Build 7000 boot camp partition, but parallels tools will not install. Half way through the process, a windows unsigned driver security box pops up, and when I tell it to install anyway, it still rolls back the installation process and I get the message "An error has occured while installing parallels tools, click OK to restart your computer and try again." or something to that effect. I have tried this about 15 times, and I have tried uninstalling/deleting the VM and re-creating the VM to no avail.
What I want to know: Is there a way to manually install Parallels Tools while running in the boot camp partition, just like installing any other application? I want to install it outside of Parallels, since for some reason it keeps screwing itself up when trying to set up the drivers as a VM.
View 5 Replies
View Related
Apr 10, 2009
I was able to get Windows Vista 64 running on my 17" MBP, it is pretty slick. I set aside 32 GB for Windows, ran the install, loaded all the appropriate Boot Camp drivers and everything is working perfectly in Windows. I boot back to OS X to attempt to configure Parallels...
So I fired up Parallels and follow the guided instructions. However, when I get to step 2 Im not sure what I should be doing. I already have Windows on its own partition, but Parallels is asking me for a CD/DVD image. Im a little leery of putting the Win disc back in, I dont want Parallels to always want to boot from the disc. how do I tell Parallels to load Windows as a Virtual Machine off of the Boot Camp partition?
The partition Boot Camp created now appears on my Desktop in OS X as Untitled, I can not, for the life of me, figure out how to change that. If I eject that volume will I still be able to Boot to Windows? Will Parallel still work?
View 5 Replies
View Related
Apr 16, 2009
So I finally got Windows 7 64bit installed on my MBP 2.33 machine.
However, from the guides, I should just insert my leopard disc and it should run. This is the thing, I don't know where my leopard disc is (i've been moving a lot lately due to being unemployed) and its either lost or packed away somewhere. I have a backup copy on my time machine drive and haven't tried that yet. I downloaded a 2.1 extraction and burned it to CD though. I inserted the CD and I can see in windows 7 three applications. One is Windows XP, the others are Windows Vista 32 and Windows Vista 64. I click the Vista 64, but nothing happens at all, and no drivers are isntalled.
View 4 Replies
View Related
Jul 16, 2009
im using boot camp for windows 7 and recently started to use vmware and ever since then the start up time is horribly long when before it was very fast. it takes a long time to get to the log in screen and then when i get to the desktop it stays black for a while longer. its not the worst thing in the world and a small price to pay to be able to run my boot camp partition alongside os x but i just want to make sure vmware is the culprit because if it isn't i might need to do some more digging to find the real problem.
btw im talking about starting windows through boot camp not through vmware.
View 1 Replies
View Related
Oct 8, 2009
I got the 64bit version of windows 7 from my the Microsoft Acedmic Alliance program. I downloaded it on my parents windows machine burned the .iso with nero and I went throught the boot camp assistant it asked me to put in the disk. the computer rebooted and then it was a black screen. The
The disk is a bootable disk because I used the same disk to install it on my parents windows laptop.
How do I get the disk to boot on my mac?
View 6 Replies
View Related
Oct 9, 2009
I've installed the drivers, and when I start up in Windows, neither the internet or the wireless pick up.
Using Windows Vista Home Premium. The little wireless icon in the tray just has the big X, so it's literally picking up nothing. I also can't connect via ethernet.
View 6 Replies
View Related
Oct 22, 2009
Is it possible to install Windows 7 on an internal disk via Boot Camp and then remove this disk and use it as an external drive? I have two drives for my mini, one in use and one in an external case; unfortunately, neither have room for everything plus Windows. If the answer to this question is no, then I'll buy a bigger drive. I'd just like to avoid this if possible (I already have a ton of external drives and not enough ports to plug them into).
View 4 Replies
View Related
Dec 18, 2009
I want to know if you guys have a really slow windows 7 and/or Snow Leopard boot up time?I get a nasty white screen before the main selector kicks in.I'm using a mac mini late 2009.
View 2 Replies
View Related
Feb 22, 2010
I have a 15" MBP. Hardware in my sig.
I'm getting Win7 this week. I'm getting it free from school and unsure at this point whether it will be 32 or 64 bit. That said, here's what I want to do with my setup.
1: School. I have to use Office 2007 for my classes. Office 2008 for Mac is not supported, because some of the formulas that you create in 2008 won't convert correctly into 2007 format and I can't have that. I will also use IE due to the fact that neither Firefox nor Safari will play my Mediasite classes correctly in Silverlight. Only IE allows me to speed up the playback. I am going to use Parallels 5 for this.
2: I game, but not much. The one game I love and will definitely put on my Mac is Morrowind. I want to use Boot Camp for this reason.
Soooo, I have been told that if I'm going to install Windows under Boot Camp that I should do that install first. Then install Parallels. I'm really not sure how to do any of this. I understand that I will only need to install Windows a single time and that it should work under with Boot Camp or Parallels.
i have the Boot Camp install PDF from the Apple site, but I'd love some tips, tricks, help, advice, words of wisdom, etc., from this forum. Please tell me what you think about which to install first, what approach to take, how much HDD space I should partition when I install under Boot Camp, etc.
View 9 Replies
View Related
Mar 12, 2010
I used to be able to drag files over to my storage drive from Windows 7, but I'm unable to do it now, I have Boot Camp 3.1 installed and the latest update for it. If I right click in the storage drive and select New Folder it says Destination Access Denied, and has the buttons Continue / Skip / Cancel. When I click Continue, it shows the same dialog but it says You need permission to perform this action and the buttons Try Again or Cancel, I've repeatedly clicked Try Again and it does nothing.
View 7 Replies
View Related
