I'm trying to install a copy of Windows XP on my external hard drive. I don't have a working cd drive though on my macbook so I can't use a cd. Is there any way to install to the external without a cd? If not is there any way to install it with a windows pc and have it work on my mac?
View 15 Replies
I'm having some huge problems. I have an .iso of Windows 7 Ultimate but my whole problem is that my macbooks dvd-rom drive crapped out on me a year ago so no burning no reading and Disc Utility wont let me restore the iso onto an external hard drive.
Does anyone have any idea what I could do to fix this? Is there a way I can put the image onto the hard drive at all?
I just finished up a fresh install of Windows 7 and downloaded and installed the NVidia driver from their site directly since the one in the Boot Camp files is pretty old and technically the Vista driver anyway.
But I still need the Brightness, Sound, etc key functionality. Is there a way to selectively install Boot Camp drivers? That's the only one I need. The wireless, chipset, video and everything else works just fine (and in some cases better) than the ones included in Apple's setup.
In other words... I have moved my music library to the external hard drive, as per an earlier thread I read here on the forums. It worked like quite well. Now that it is working perfectly, I am having a hard time leaving well enough alone. It is never a good idea for me to think too much...Can itunes be installed and run on/from an external hard drive? If so, how?
View 15 Replies View RelatedI just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP. I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition? Which is better and why? Also, how much memory should I allocate to Parallels/Windows XP?
hi! i'm planning to install windows 7 64-bit in my mbp, problem is i looked at the requirements needed and it stated that i needed boot camp update 3.1. i checked my boot camp version and it stated that i had 3.0.1, tried using software update, but states that i had no updates available. what should i do? and what else do i have to keep in mind while installing windows using boot camp. thanks in advance!
View 1 Replies View RelatedDoes anyone know how can i install Vista home premium on my imac? ive been using boot camp to do all the steps but im stuck at where i should choose NTFS format partition had disk. Seems like mine is FAT32.
This is what ive done;
1.Open up bootcamp assistant
2.Partition, divide equally(116GB each)
3.Insert Vista disk and start installation
4.Install Vista and insert CD key
5.custom installation
6.Now this is where i stuck
I have 4 options, and i should choose the last one which says bootcamp 116gb, but i cant click it since it says the disk need to have NTFS format. How can i set so that i partiton it to NTFS?
I am trying to set up a Parallels 4 VM for a Windows 7 x64 Build 7000 boot camp partition, but parallels tools will not install. Half way through the process, a windows unsigned driver security box pops up, and when I tell it to install anyway, it still rolls back the installation process and I get the message "An error has occured while installing parallels tools, click OK to restart your computer and try again." or something to that effect. I have tried this about 15 times, and I have tried uninstalling/deleting the VM and re-creating the VM to no avail.
What I want to know: Is there a way to manually install Parallels Tools while running in the boot camp partition, just like installing any other application? I want to install it outside of Parallels, since for some reason it keeps screwing itself up when trying to set up the drivers as a VM.
I Have my 15" macbook pro 2,4 Ghz 2G in RAM, with Snow Leopard, bootcamp and vista running for some time (about a year or so) and every thing has been going ok. Last night I made a clean windows 7 installation. All went good, installation, let windows 7 make his updates, I put Snow Leopard disk to make macbook pro drivers updates and I installed all the program I need including Norton 2010 Antivirus.
All went smooth and easy untill I activated Windows 7 with Daz Windows Loader 1.6.9. After a few seconds It said : Everything Ok, Windows is now activated and your machine will reboot now. After that, it gets out of the desktop to the closing window and suddenly I get the blue death screen. I have to manually press de power button to shut down my macbook pro.
I reboot again and after getting the safe mode screen stuff i just keep with Start Windows normally. It starts well again, but now each time I want to reboot or shut down my MBP I get again and again the blue death screen. And I�m sure i will get it while working soon.Is it probably because I did all kind of updates before running the Daz Loader (including programs and antivirus software)??
I have a 15" MBP. Hardware in my sig.
I'm getting Win7 this week. I'm getting it free from school and unsure at this point whether it will be 32 or 64 bit. That said, here's what I want to do with my setup.
1: School. I have to use Office 2007 for my classes. Office 2008 for Mac is not supported, because some of the formulas that you create in 2008 won't convert correctly into 2007 format and I can't have that. I will also use IE due to the fact that neither Firefox nor Safari will play my Mediasite classes correctly in Silverlight. Only IE allows me to speed up the playback. I am going to use Parallels 5 for this.
2: I game, but not much. The one game I love and will definitely put on my Mac is Morrowind. I want to use Boot Camp for this reason.
Soooo, I have been told that if I'm going to install Windows under Boot Camp that I should do that install first. Then install Parallels. I'm really not sure how to do any of this. I understand that I will only need to install Windows a single time and that it should work under with Boot Camp or Parallels.
i have the Boot Camp install PDF from the Apple site, but I'd love some tips, tricks, help, advice, words of wisdom, etc., from this forum. Please tell me what you think about which to install first, what approach to take, how much HDD space I should partition when I install under Boot Camp, etc.
I am trying to install Windows 7 on my 24" iMac. But the DVD drive it playing up and is not accepting the CD. I am wondering if there was a way I could use my Macbook to install it over Firewire or something similar ? Even USB ?
View 3 Replies View RelatedI just installed Windows 98 SE in the VMWare Fusion Beta (latest update), and it seems to work very well, except the fact, that whenever I ask it to install the tools, no setup windows pops up, as it says there will in the help file. I also tried Google, but noone else seems to have the same problem.
It really is a big problem, as I can't have a resolution above 640x480 and more than 16 colors, which prevents me from running my retro games like RCT and Theme Hospital.
I'm trying to install the 168.81 ForceWare drivers for my 9600M GT (256MB) in Windows 7 x64. The drivers from Boot Camp on the Snow Leopard DVD installed fine. I want 168.81 because I always like to have the latest drivers for everything.
Anyway, when installing it, it says something about not having the required hardware and it won't install.
Is the Boot Camp drivers the only way of having the latest drivers.
perhaps I am doing something wrong? I wanted to install Windows XP on my iMac. I previously had partitioned my Mac drives. I backed everything on these drives to my external and blew the partitions away creating my one Mac drive again.
I then ran Bootcamp, created a partition and installed XP. Everything was fine. I then partitioned my main drive and got the warning message about Bootcamp maybe not working afterwards. So I finished partitioning my Mac drive as I wanted and now I don't have the option of booting into XP through Bootcamp. When I try it just shows the Mac drive as my only boot option. I see the XP Bootcamp drive in the System Preferences startup disk area, but I assume I did something to the partition once I partitioned my Mac drives
So I got windows 7 installed on my 2010 mbp but when I went to install my windows drivers via my Mac osx disc I realixed I couldnbt find it.
Is there anyway to install all the drivers/apple software without my OSX disc? If not, how do I go about getting a replacement disc from apple?
I bought a MacBook this week for the purpose of running Windows XP off a partition. I ran the Boot Camp Assistant, partitioning 15 gig of my 160 gig hard drive for the Windows OS. Boot Camp prompted me to insert the Windows XP Pro with Service Pack 3 installation disc I'm using, so I did. I followed the Boot Camp instructions exactly, and the installation seemed to be on its merry way ... until the screen indicated there were 33 minutes left.
With 33 minutes to go, the screen seemed to freeze (except that I could move the cursor/mouse) but the installation never advanced. I waited about an hour and it was the same, so I held the power button down and restarted the computer. It booted in Windows and tried to resume installation with 39 minutes to go. When it got to 33, it hung again. I've noticed other people having problems with this, but no solutions. Any ideas, folks? I want to be able to boot into Windows XP, not use Parallels or any other program.
Before you ask, I had found some old games a few months ago that I wanted to play for nostalgia sake, so I made some Windows 95 and 98 virtual machines. It was pretty easy actually, since I just used Disk Utility to create images of the install discs. VMWare had a nice guide on their site that helped me get networking setup properly also.
But then I got to thinking, it'd be pretty fun to try and get Windows 3.1 up and running as well. I was able to make images of some MS-DOS 6.22 install disks and got that installed just fine. My problem actually comes when trying to install Windows itself. I was able to get the install files from 2 different sources. The first was just a folder of ALL the install files from 6 different disks, and the second was 7 different ZIP files from 7 different disks. I tried creating a single image from the first source, and 7 different images from the 7 unzipped folders from the second source, but on both attempts I'm unable to access the A: drive in DOS to start the setup. It gives me an error message about reading from the drive, followed by the standard "Abort, Retry, Fail?"
Has anybody else tried to get a Windows 3.1 virtual machine up and running and come across this problem? I even tried Googling for the exact lists of files contained on the 6 disks from my first source in order to try and split those up and make the necessary images, but unsuccessfully.
I am very glad with my Mac, but I have two software that I must run as I have record for several years ( Quicken and DacEasy accounting for Windows).
Is there a software for Mac that run this programs without installing Windows, as I don't want to have both in my Mac.
i downloaded and burned a win 7 .iso to a bootable dvd. I went through the Bootcamp assistant. When i went to install win 7, it restarted, i get grey screen for a few sec, then blank screen, then a black screen with grey DOS text saying this:
1.
2.
Select CD-ROM Boot Type: _
Pressing 1 or 2 does nothing or any other key on my keyboard for that matter. im just stuck in this mode and cannot proceed, i just have to shut down and boot back to OS X.
Okay, I'm about to go crazy over this. I have a 24" mid 2007 iMac; 2.4 C2D. I purchased a legal msdn download of Windows 7 Professional; 64-bit with my education discount. I currently have Windows XP on my bootcamp partition. I knew that I would have to do a clean install, but I've been unable to do anything. First, I burned the ISO onto a dvd using microsoft's utility. When I restarted and booted, it came up with:
1.
2. Select CD-ROM type
...and hangs there. I looked up a lot of stuff, and then burned the ISO in another imaging app. I've tried installing from boot camp setup assistant, booting from the disk, even tried installing inside of VMWare Fusion. Nothing has worked. I would do the USB thumbdrive installation, but from what I understand, the EFI doesn't permit you to boot from USB.
how can I install a windows based application on my mac and run the program without installing windows? I have tried a program called crossover which is supose to be an emulator but it doesn't seem to work.
Info:
iMac, Mac OS X (10.7.4)
My new 2010 15" i7 is on route to me and I'm trying to decide which version of Windows I want to bootcamp with. On my mid 2008 pro I used Windows XP because I only had 2gb of ram. But since my new pro has 4 gigs of ram i would be losing out of some memory since xp can only register 3.5gbs. So I was wondering if anyone has experienced using xp 64 on the new macbooks, or if the bootcamp drivers will even work with that operating system since it didn't really have any support. I would rather use xp than 7 since i have a desktop that i use as a media center/ gaming pc already, and the extras that 7 offers arent necessary on my pro.
View 8 Replies View RelatedI just purchases a Macbook Pro 13" 2.53, haven't received it yet, and I want to get windows 7 to run on it from bootcamp. I was looking and saw the $50 upgrade windows 7 thinking that I would be able to only use this to install. After my research I'm pretty sure I'm wrong and would have to buy the full retail version.
Now my question is since I need a full version of windows, and I'm looking for the cheapest way to upgrade, would windows vista basic work fine to upgrade to window 7?
Is there a way to make it so that only windows in installed on my Mac Mini (not using boot camp). I plan on buying a MacBook Pro when they get an upgrade (which I am getting really sick and tired of waiting for but that is another topic) and will be using that for my primary computer. I also need to have a computer with Windows installed for testing purposes (IE for web and also for my Unity projects) and figured that installing it on my Mac Mini would be the best plan.
View 1 Replies View RelatedSo, I've been trying to download the proper drivers onto my windows partition with no luck. I just partitioned my drive yesterday and installed Windows XP Sp3 successfully. I realize you need the mac os x disk to put in while your in Windows and install the drivers from there, but I don't have a disk and need to get the drivers on as soon as possible. I've done some searching around and read that you can just install the Windows Xp drivers update 2.1 from the apple site: http://support.apple.com/downloads/B...ers_Update_2_1
I've done this and put the .exe file onto a usb flashdrive, started my mac in windows and tried to install them but when I double click on it, nothing happens. I don't know what else to do.
I have an Intel iMac running 10.7.4. I would like to install Mac OS X 10.6.8 on an external HD.How would I go about doing that.
Info:
iMac, Mac OS X (10.7.4), Intel iMac 4GB RAM 500GB Hard Disk
has anyone installed osx onto a external usb harddrive using a macbook air?
was wondering what the performance was like afterwards?
would help to get around internal small hd space....be good when using at home and also using external monitor....
:for those that dont know....
[URL]
I've acquired a rev A bondi blue iMac G3 (the one in my sig... which doesn't have fire wire). It has a 4GB drive in it that has Panther on it and everything is great... but the CD drive is broken. In that I paid $15 for the computer, and that its over a decade old, I really don't want to put money in to getting a new drive.
I do, however, want to upgrade the hard drive from 4GB to 80GB. I have a spare IDE drive, and a firewire case. Can I plug the hard drive into my iMac G4 and re-install panther on to it? Then just take the 80Gig drive out of the case and install it into the iMac?
I just replaced the hardrive in one of my macbooks. i am trying to load snow leopard on it and it just skips through the installation and says Intallion failed?
anyone have any thoughts. i am installng it from an external harddrive!
I have a computer running Windows Vista, and I want to install Mac OS X Leopard on a 500GB external USB hard drive. I have seen many tutorials on how to do this on a Mac, but not on a PC.
View 5 Replies View Related
