Windows On Mac :: How To Run Same OS On BootCamp And Parallels
Apr 8, 2009
Not sure how accurate title is, but I need some help here, By friday would be best. I have an 80GB HDD, so I'm a little bit crammed for space. My biggest problem with space is operating systems. I use parallels to run a few OSs, 20GB worth are on the HDD. My problem is that sometimes I need to boot up in only one OS, using Boot Camp, and sometimes I just want to use parallels. Because I don't have a lot of space I can't just install them each twice, that would be half my HDD! I'm looking for a way to use the same OS to boot up in parallels or Boot Camp. Now from what I understand parallels allows you to boot up your OS located in other partitions to run next to Mac.
Am I correct? Assuming I am correct, I have another problem. I am always needing different amounts of space, so setting a permeant space for each (partitioning) doesn't fly. (I know I can just make the Boot Camp partition large then use it for my Mac as well, but that just won't do either). When you boot the Boot Camp partition up in parallels how does HDD space work? So I need to be able to adjust the partitioned space without having to erase it. Is that possible? Is there any way to boot the computer into a different OS that is on the same partition as Leopard? One last question. Is there any way to boot the computer into a different OS by using an external drive?
View 5 Replies
ADVERTISEMENT
Jul 14, 2009
If I am running xp on bootcamp, is it possible to install parallels and then just run xp I installed or do I have to install the xp all over again for parallels?
View 3 Replies
View Related
Oct 9, 2009
I have been debating on gettiing either bootcamp or parallels for my Macbook Pro so I can run certain programs I have left over from my old PC. I do not know much of the difference between the two. I believe parallels can run both Mac OS X and Windows at the same time but thats about it. Also, if there is something better than either of these please mention it.
View 10 Replies
View Related
Sep 9, 2010
With some advice from this forum I've now setup vista on a bootcamp partition and have pointed parallels at this installation which all works well. When I boot into vista I have the proper Radeon driver installed and can play games fine on max settings at the highest resolution, however if I try to run a windows game from Parallels in OSX it defaults to the Parallels video driver and 640x480 resolution. Is there any way of running games at full screen/full settings from osx or will I have to reboot into windows each time?
View 4 Replies
View Related
Nov 11, 2010
I read that for gaming, Bootcamp is the way to go, but for other general Windows use, Parallels or Fusion is the way to go.
But for me, I am planning to play games - hence Bootcamp - as well as use Parallels/Fusion for general use, namely to use Microsoft Office Onenote (an unbeatable note-taking software that needs a Mac version yesterday).
Is this even possible and how much memory will the additional parallels take (I'm planning a 40gb bootcamp partition btw on a 250gb hard drive)?
View 7 Replies
View Related
Nov 19, 2010
I have a Santa Rosa MBP with a broken Superdrive, and I need to get Windows 7 installed on Bootcamp. I had a copy of Parallels laying around so I install W7 on that, but now I need a way to image that over to my Bootcamp partition. Is this possible? No amount of Googling is turning anything up.
Alternatively, if anyone knows other ways for me to get W7 on my laptop, that would be just as appreciated. I have tried imaging my flash drive with W7, and unfortunately I get an error on rEFIt that external hard drives are not well-supported by Apple's firmware for legacy OS booting.
View 1 Replies
View Related
Jan 8, 2011
I installed Win7 via bootcamp. The ONLY reason I need windows is to run quickbooks - and possibly microsoft office in the future. I've gotten sick of rebooting every time I need to do a simple task in quickbooks.
So I'm looking at installing Parallels 6. QUESTION - should I just simply use my bootcamp partition?
View 16 Replies
View Related
Mar 15, 2009
the step shown below for setting up an existing boot camp partition in parallels 4 (build 4.0.3810) for Windows 7?
View 3 Replies
View Related
May 6, 2009
I have an imac with Vista installed both on a Bootcamp partition and in Parallels.
Sorry if this sounds ridiculous but could anyone advise instructions on installing Window 7 on my imac?
I don't want to mess it up- ?
View 3 Replies
View Related
May 8, 2009
So I installed XP on Parallells recently, but I also want to set up Bootcamp.
Is there a way i could use the same XP I installed on Parallels also for Bootcamp so I wont have to use up space installing XP again?
View 2 Replies
View Related
Jun 1, 2010
If I want to run bootcamp or Parallels on my Mac what is the best version of Windows to run on it?
View 5 Replies
View Related
Sep 7, 2010
I want to be able to boot into both osx and win 7 and i'd also like to be able to run win7 apps from within osx. Do I need to do a boot camp installation (for dual boot), and a parrallels/fusion install (to run apps within osx) to achieve this or will one method allow me to do both? I want to create a 200gb partition for windows and want to be able to see windows files from osx.
View 22 Replies
View Related
Sep 15, 2010
Just installed Win 7 on MBP13 in bootcamp. I am going to install Parallels next and point the VM to bootcamp OS so I can choose. I'll likely run Parallels mostly, but may need to boot from bootcamp once in a while for native speed. If I install the aps in the bootcamp OS, can the VM in Parallels access them? Or do I have to install them again in the VM?
View 2 Replies
View Related
May 1, 2006
I tried Beta 1 and wasn't impressed so I deleted and stuck with bootcamp.
What's the Beta 6 version like if you've tried it?
View 20 Replies
View Related
Apr 13, 2009
I have an iMac 24" 2.8ghz, 4gb ram, mid 2008. I have a couple of programs that only work under Windows, plus my wife doesn't want to learn Mac (sigh). I've been reading the threads (via mroogle) and looking at the documentation available from both Parallels and VM Ware and I'd like to know if I my understanding of how it works is correct. For Bootcamp, you partition your HD to create a bootcamp partition and OSx puts in drivers that allows you to install/boot windows in that partition and then you simply boot from that partition. This seems to be the closest to a genuine Windows environment. Right?
For Parallels/VM Ware, you install the application and then it runs in an OSx window and you create a virtual machine which installs windows and then it runs under OSx. Then you don't need windows drivers since Parallels/VM supplies the drivers as part of its own code. The virtual machine (64 gb or so) becomes your "hard disk" (I think) and OSx doesn't see the file system from other applications. Parallels/VM emulates the PC bios more or less? So I would need an OEM copy of Windows XP plus the service pack and also VM Ware or Parallels if I choose that route.
View 13 Replies
View Related
Jul 3, 2009
how to load your bootcamp partition with Parallels.
View 6 Replies
View Related
Aug 5, 2009
I have MBP running 10.5.7 2.4 with 4 gigs of ram and I need to run Windows. I would like to run it stand alone to use all my available resources, as I will be running PS AE 3DsMax ect..., but the kicker is I would need access to my Mac files.
I read that "bootcamp" installs will not allow access to Mac files and folders while in PC and vise versa... true? Parallels will but then Im not taking advantage of all my hardware resources running windows this way... Do suggest run a "bootcamp" install and use a removable for storage of all files so I can go back and forth with them if need be? I have files on my mac right now I will need to open and have access to inside of Windows programs.
View 5 Replies
View Related
Sep 4, 2009
Which do you prefer and why? I am going to be running one on the imac I am about to buy. I don't wanna fool with heavy burning on my MacBook, but I will get down to it on iMac. I have pretty much given up on finding a good decryption program for mac.. many headaches later I have decided to run something so I can use my windows programs to back up my dvd's.
When I put windows on mac, in theory I open it up to the same crap windows has viruses/spy-adware etc. What do you use to keep your mac safe and sound when running windows?
View 22 Replies
View Related
Dec 27, 2009
I'm gonna give my mom my 13" Unibody Aluminum MacBook 2.0GHz with 2GB RAM and a 160GB HDD. She needs to run the Windows version of Quickbooks and I'm wondering whether to set her up in BootCamp, Parallels, or VMWare. She doesn't necessarily need to virtual machine and she probably won't use more than 20 GB, but what are your thoughts?
1) BootCamp?
2) Parallels?
3) VMWare?
View 4 Replies
View Related
Jan 16, 2010
Do I need two installs of Windows?
I thought I had a Bootcamp icon in my system's preferences after installing XP properly, however after spending some time getting P5 to run I suddenly don't have that icon.
View 4 Replies
View Related
Apr 4, 2010
Would I get better performance if I ran my BootCamp partition through Parallels, or would I get optimal performance if I installed Windows inside Parallels, i.e. Virtual Machine (correct me if I'm wrong on the terminology)?
(I know that for the BEST performance I should use just BootCamp, but let's say if I didn't want to switch to BootCamp and wanted to access Windows through Parallels.)
One thing I've noticed while running BootCamp partition on Parallels is that if it hung and I wanted to force quit the app, it would warn me that I'd better quit the app by pressing the "Stop" button in Parallels so to avoid possibly corrupting the BootCamp partition and whatnot.
View 1 Replies
View Related
Jul 2, 2010
Im thinking about getting Vmware or Parallels using it as a virtual PC to access my Bootcamp partition.
I'm just wondering if this is even possible (im new to virtual pcs).
If it does work, will i be able to access bootcamp directly from booting it natively?
View 1 Replies
View Related
Aug 3, 2010
I just bought Windows 7. Can I install on both bootcamp and parallel or can I only pick one or the other since i only have one license?
View 6 Replies
View Related
Aug 5, 2010
Currently, I installed windows xp via Bootcamp and it's having no issues. However, I also have parallels 5 and windows 7 so i was wondering if I should delete the bootcamp partition and install win7 via parallels instead?
View 9 Replies
View Related
Aug 17, 2010
I have installed Windows 7 using bootcamp with no problems. I now want to use parallel so I can do some things in windows without restarting. I don't want to get rid of the bootcamp install though since I do gaming through it. Now that I've installed Parallel it's asking if I want to use the bootcamp partition in the virtual machine? Do I? I don't really understand.
View 1 Replies
View Related
Jun 25, 2012
I would like to migrate windows7 Professional 32 bits from my existing Parallels desktop 7 VM for Mac where i have already installed Windows 7 and all my applications (of course, to avoid re-installing all applications, including license issues) to Bootcamp on my iMac 27" Quad-Core Intel Core i7 (2012)
Info:iMac (27-inch Mid 2011), iOS 5.1.1
View 2 Replies
View Related
Nov 11, 2010
I am considering getting my first mac (MBA) but I have an external hdd with NTFS format. I've read that OSX can read files from NTFS but cannot write to it. What if I run Parallels/VMware using the bootcamp partition? Can I then write files to the external hdd?
View 16 Replies
View Related
Apr 30, 2008
Been searching and can't find the answer here. I setup Bootcamp last week and had internet connection and everything working fine. I've setup Parallels now as well and I am connecting to the Bootcamp partition with this via OS X.
So, everything is working well, I can view my local websites on Leopard via Parallels, the only thing that has stopped working is my wireless internet connection in windows.
My only guess is the Bootcamp is now connecting to everything via my OS X connections, but not sure. Does anyone know how to set the wireless internet up again?
View 2 Replies
View Related
Nov 5, 2009
I have windows 7 installed in bootcamp.
I made it a VM for Fusion 3. Installed VMWare Tools.
If I wanted to transition to Parallels 5...
Would I (most likely), uninstalled VMWare Tools, reboot.
Then tells Paralells to make Bootcamp a VM.. then install the Parallels Tools.
My basic wonder, is can I do this. or will I have to fully reinstall the entire bootcamp partition to make the switch.
View 7 Replies
View Related
Nov 21, 2009
With winter break approaching I was planning to get some PC games(COD:MW2, Battlefield etc) and play them during break but I'm not sure which software would be best to play those games. I've looked at VM Fusion, Parallels and Bootcamp but I'm still not sure as to the advantages and disadvantages of each. Is there a way i can use a playstation 2 controller to play pc games running through bootcamp? I've heard that I need some kind of an adapter but I've been unsuccessful in finding one so far.
View 6 Replies
View Related
