Windows On Mac :: Bootcamp HD Not Showing Up On My Desktop / Unable To Mount Image
Jun 13, 2009
On my old macbook, I installed vista and everything worked fine. I just did that on my new macbook pro. It runs fine and all, but the Bootcamp HD isn't showing up on my desktop under my Macintosh HD. I went do disk utility and it verifiys the disk, but repair just does this:
I try to mount the image, but it fails and wants me to try repairing, which as you see in the picture doesn't work. Any ideas?
View 8 Replies
ADVERTISEMENT
Feb 8, 2009
I'm new to this forum, but need help with my external harddrives (WD Pasport 250GB). I can find it in my disk utility, but not on my desktop. I had WD send me a new drive, but now I do not know how to transfer the info from the old drive. Its not a dead drive- its obviously turned on and connected, but I can't mount it to my desktop. Any advice??
I have a iBook G4 (if that matters).
View 5 Replies
View Related
Jan 6, 2009
for the past month or so my automated backups with time machine/time capsule have not been working. Every so often the following error message pops up:
"the backup disk image could not be mounted"
in troubleshooting, i have tried to mount the sparsebundle image directly but without success. from reading around a bit i can see that others have had this problem, and that one solution is to delete the sparsebundles and start again.
but that of course means losing all my archived backups, which i would rather avoid.
View 1 Replies
View Related
Feb 28, 2012
Yesterday I downloaded and installed Lion. After a while I tried to open one of the disk images that I have stored on the harddrive, which worked to mount prior to installing Lion. While attempting to open it, the process fails and gives the error "no mountable filesystems". I have searched for the error on the internet, and there does not seem to excist a solution to it. However, all the people with the same error, whcih did not have a solution, did not seem to have a similiar problems. Their problem lied with not being able to access disk images downloaded from the internet, while my disk image already excised on the hard drive before installing lion.
Many of the files and documents on the disk image are irreplaceable to me. I can not stress how important it is for me to recover them. If I am not able to do so, it will result in a massive economic loss.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 9 Replies
View Related
Nov 11, 2010
I recently made a clone of my Windows XP Pro SP3 installation (its roughly about 14GB according to Finder/WinClone) so i made a 80GB partition on my 320GB drive and it gives me this error message:
the WinClone came from a 500GB internal drive and ive gotten winclone images to restore to a MBP before but not sure why its giving me this error code, anyway to restore the image to the new partition (which was created with Bootcamp) as i no longer have access to the old machine it was running on.
View 24 Replies
View Related
Jul 3, 2012
After a fatal mac crash (PPC 10.5) i had no option but to reinstall the OS (10.5), i obviously didnt reformat the drive in the hope that i would be able to recover some if not all of my data. Using various tools i was happily able to recover most of my data successfully, including 3 AES encrypted Disk images of around 30GB in size each.
I didn't hold out much hope for actually recovering the data inside the dmgs, although after some fiddling i was able to recover 2 of them fully after receiving the no mountable file system error, i dont know how i done it but nonetheless i dont appear to have lost any data from those two dmgs whatsoever. Now the third dmg (also about 30GB in size) never gave me the no mountable file system error and instead returns the error: unable to mount: not recognized. Im pretty sure that my data is still there somewhere due to the sheer size of the recovered file, tied with the fact of the success of the recovery of the other 2 disk images. I have read every post i could find on this site and have trawled the web tirelessly looking for a solution to this, but have yet to find anything that even comes close - the closest i have found was a post on this forum where it would appear an apple engineer was able to recover most of the data using some sort of magic.
I am not in a position to pay for professional data recovery and besides i would love to see a solution to this problem appear somewhere on the web. I have tried the usual, rebuilding permissions, mounting on another machine (imac G5), resizing with disk util, repairing with disk warrior, converting to ISO - all which return the same error - not recognized! I have tried every terminal command i have found on the web, although decyphering some of the information is a little out of my remit and my knowledge of HEX is limited. I haven't yet tried Toast, basically because i dont have a copy, but it would be my guess that this would return a similar result. Incidentally when i recovered the original data, there were some small (what appeared to be dmgs) files around only maybe a few Kb each with part of the file names of the original files, i'm guessing these maybe the headers or something like that? although i didn't have to do anything with them to get the other 2 disk images working again.
Info:
iMac, Mac OS X (10.5), Disk Image error
View 4 Replies
View Related
Mar 14, 2009
In trying to do my first backup with my new time capsule but keep getting this? The time capsule disk image is showing up in the desktop. How I can get this working?
View 3 Replies
View Related
Jan 30, 2009
Used migration assistant to move my Blackbook apps and settings to the Air using a Time Machine backup from my Time Capsule - wirelessly. Two hours later (not terrible) and I'm using my Air with all my apps and setting - fantastic.
Question: My Blackbook also has a Bootcamp partition running Windows - is there a way to take that image and migrate it to my MB Air? I'd rather not have to purchase the Superdrive and re-install/setup the Windows OS on my Air....
View 8 Replies
View Related
Dec 9, 2010
How can I run it without WM Ware Fusion or Parallels? Is there an app where I can run it somehow without such programs?
View 1 Replies
View Related
Jul 29, 2010
I am trying to get my Macbook Pro (15" 2.53 GHz, 4GB) to play nicely with Windows 7. To get a valid copy of Windows I got in on the Ultimate Steal program last year. For those who don't know what it is, basically if you're a student you could get Win7 Pro Upgrade on the cheap. Before this I didn't have any copy of Windows on my laptop. I had to go through a huge pain in the ass process of installing XP 32-bit > Vista 32-bit > Vista 64-bit > and then upgrade that to Win7. I finally had a 75GB partition of Win7 64-bit installed, when booting up holding down Option I got to select either the Macintosh HD or Windows so everything's rosey.
I wanted to do some virtualization so I didn't have to reboot all the time so I grabbed an eval copy of VMWare Fusion. I kept getting an error about not being able to load the BootCamp partition, getting an error of Resource Busy. When I look at the partition in Disk Utililty the name of it is disk0s2 instead of BootCamp like it used to on my old Macbook. Trying to mount the mount fails and for some reason the partition shows as exFt. Going back into Windows show that it is in fact partitioned as NTFS.
Well not wanting to go through the same install hell that I did before I used Windows built-in functionality to create a system image as well as created a system restore disk. I blew away the bootcamp partition and launched Boot Camp Assistant, recreated the partition and stuck in the System Restore disk. Boot Camp Assistant restarted to install the OS and everything seemed to go well. I can no boot into Win7 and Mac but the partition on the Mac side still shows as disk0s2 and exFat. It *is* now mountable but it shows that the drive is completely empty (107 gb free, 1.8mb used). Another weird issue, the partition isn't 107gb, it's 80gb. And there is definitely more than 1.8mb used. Obviously VMWare still doesn't like this and I'm just stuck.
View 24 Replies
View Related
Jul 19, 2009
I want to use vmware to get into my windows partition. However, the 'untitled' windows partition is not showing up on my osx desktop. It is saying it is 'not mounted', how do I fix this. Here is a screenshot from disk utility...nothing's working, but the partition is fine.
View 8 Replies
View Related
Jul 5, 2006
what is the .DS_Store file that is on my desktop and in many of my folders? can i move it, i have tried dragging it to a different folder, but it just pops up again, and it makes my desktop look all untidy!
View 9 Replies
View Related
Jun 5, 2009
I decided earlier today that I wanted my boot camp partition to be bigger so I made a disk image of it with winclone and then proceeded to restore my HD to a single partition and then partition it again with boot camp assistant.
The partitioning went fine and then I had two partitions. I then went to restore my system with the mac clone image and this process went fine and I can now boot up into windows with the partition.
when I am in OSX the bootcamp partition will not mount. When I go into disk utility and try and mount it from there I get an error message that says "the drive cannot be mounted, try running first aid on the disk and try mounting again
View 2 Replies
View Related
Jul 28, 2010
I have a Mini 2.26 Core 2 Duo with 2 GB 1067 DDR3 RAM and a 160 GB HDD. I'm pasting the system profiler specs:
Macintosh HD:
Capacity:125.49 GB (125,493,575,680 bytes)
Available:101.22 GB (101,216,739,328 bytes)
Writable:Yes
File System:Journaled HFS+
BSD Name:disk0s2
Mount Point:/
BootCamp:
Capacity:34.2 GB (34,202,451,968 bytes)
Available:13.77 GB (13,774,503,936 bytes)
Writable:Yes
File System:MS-DOS FAT32
BSD Name:disk0s3
Mount Point:/Volumes/BOOTCAMP
The partition "Bootcamp" can be seen from OSX, but when I restart and use the option button to select an OS, it just hangs up on a white screen and never loads the choices. Booting without the option button defaults to OSX. I have also tried to repair the disk in disk utility. I can definitely wipe the partition and reload XP, but I'd love an alternative. I've backed up the XP partition on a different HDD, so I'm ready to go. As this is my work rig, I have to get this resolved correctly.
View 2 Replies
View Related
Dec 30, 2009
I made a backup image file of D2 LOD and im trying to install it again but the installer keeps telling me that i need to insert disc. So my question is, how do i mount this image so that the installer can use it.
Clarification: I lost the original cd so i just have this backed up image, so the image is legit.I just wanted to play this game and i dont wanna have to go buy the disk again.
View 20 Replies
View Related
Jul 27, 2008
my mid-'09 whitebook has a dvd in it that will not eject. there's no disc image on the desktop and i can't eject from the dvd player either... i've tried shutting down and booting up, and restarting....
this is my first issue with this computer so i'm pretty worried... is there any way i can force it to eject? i mean, without damaging anything...
View 2 Replies
View Related
Apr 3, 2012
In System Prefs, selected Desktop & Screensaver. Selected image from pane at right. Used to be the desktop image would change as soon as I clicked on it. Now, nothing happens. Same results when I select an Apple image vs my own jpeg.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 3 Replies
View Related
Sep 17, 2010
I would like to "Backup", "Clone" or create an "Image" or whatever else people call it of my bootcamp installation. I know I can create an "Image" of bootcamp via disk utility but how would I restore it? Would I first delete the bootcamp partition and then re-create a bootcamp partition and then restore? Or would I just restore? Will the end result be what I am expecting, i.e., my Win 7 install right back to the perfect state of when I created the image?
Right now, let's say my Windows 7 install got smoked one day for whatever reason (it is windows) and I needed to re-install. Me personally, I would just go into Bootcamp Assistant, delete the Windows partition then create a new one and then get installing. Unfortunately installing and updating takes hours and that is what I am trying to avoid.
View 1 Replies
View Related
Jul 27, 2010
I want to load XP via Bootcamp OR virtual on my personal macbook pro. However I need my XP image for work and want to do my own backup instead of waiting for my slow desktop support to fix my image. So, if I run Time Machine, will it notice all of my changes every night (backup) that I make on my bootcamp image XP.
View 1 Replies
View Related
Dec 18, 2010
Haven't had any success searching for an answer.
I have an aluminum macbook (April 2009) and when I use a picture as a desk top image, even HD resolution pics it never quite fits well as wallpaper. I have tried all options (stretch, full screen, etc).
When I had windows pics would always fit nicely. With my mac its either too stretched and just doesn't fit well
Anyone else have this issue? Am I missing something?
View 2 Replies
View Related
Aug 8, 2010
I have Windows installed via Bootcamp on my Macbook Pro. In Windows it shows the Bootcamp Partition & The OS X partition. But in OS X it just shows the OS X partition and not the Bootcamp one and it does not show up in Disk Utility either?
View 4 Replies
View Related
May 29, 2009
I was wondering if there is anyway to pretty much copy a Vista partition on a Thinkpad T500 (university Laptop) onto a bootcamp partition, I would need to clone it because my university doesn't give us install discs, they load the OS on the laptop's as a image with all the program specific software, this would help because then I can use my mac for both OSX and class work.
View 11 Replies
View Related
May 13, 2009
I have parallels 4 installed and I want to install windows XP. My school gives us legal copies of windows 98 and a windows xp upgrade. However, neither of these comes in the form of a CD image. They are both .exe files. Parellels asks for a CD or CD image. Is there a way to install windows 98 from an .exe in parallels?
And if so will I be able to use the windows xp upgrade once i have windows 98 installed? I haven't yet tried creating a CD image with the exe file on it. I don't know if this would work because it's all in one file and not a typical windows install disk.
View 3 Replies
View Related
Oct 11, 2009
I have two USB cardreaders. One is (I think) a USB 1, unbranded. The other is a USB 2 branded Seitec). Our cameras both use Sony Memory Stick Pro Duos). They both of worked with both my wife and my iMacs under 10.5.11. Both machines (hers from 2006, mine an Intel Core 2 Duo from 2007) have been happily upgraded to SL 10.6.1... but now the cardreaders work with her machine, but not with mine. They don't mount on the desktop. I have tried various combinations ... attaching them through keyboard /back of iMac, powered USB hub. Sometimes they are recognised by System Profiler, sometimes not! Disk Utility seems unable to see them at all, so I can't get it to mount them.
However, when I leave the card in my camera and connect it direct to the keyboard (or whatever socket I choose!) the computer recognises the camera immediately I switch it on, and downloads quite happily
View 1 Replies
View Related
Feb 11, 2010
I just installed Windows 7 via Parallels Desktop on my Mac. I used to have XP SP3 before this where I had it setup that no folders from Windows would show on the OSX desktop, but now that I've installed Windows 7, the folders from Windows are showing on the OSX desktop again. I forgot how to configure this, so can anyone please tell me how to do this?
View 7 Replies
View Related
Dec 26, 2010
I can boot into bootcamp with no problems. I have been wanting to be able to open the bootcamp in Parallels. Here is the issue:
1. The partition 'disk0s3' is greyed out in Disk Utility. It is not mounted. Mounting does nothing.
2. For reference, the Windows 7 is formatted as NTFS. It is a Windows 7 64-bit install
3. Verify disk does the following:
Verifying volume "disk0s3" ** /dev/disk0s3
Invalid BS_jmpBoot in boot block: efbbbf
Error: This disk needs to be repaired. Click Repair Disk.
4. repairing does the following:
Verify and Repair volume "disk0s3" ** /dev/disk0s3
Invalid BS_jmpBoot in boot block: efbbbf
Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can"t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
I have stuff on the Windows partition that I don't want deleted. I'm really stuck on this -obviously, I can just continue to boot into bootcamp, I just would rather open it from Parallels. I'm not sure what or if I made some mistake in setting up Bootcamp, I thought I followed the directions to that. I do know I formatted the partition as NTFS during the install - as I think Windows 7 requires it. I have tried installing NTFS-3G - it is installed, but didn't do any good when trying to mount the drive.
View 4 Replies
View Related
Sep 23, 2009
ever since i upgraded to sl my boot camp partition cant be booted from. how do i make the partition bootable again. its windows 7 btw
View 4 Replies
View Related
Sep 15, 2009
Ok, I'm new to the Time Machine thing and so I backed up my iMac using Time Machine...when I go into Time Machine I only see duplicates of my desktop folder. Where are the other folders?
View 4 Replies
View Related
Jul 20, 2009
I tried to install Windows 7 via Bootcamp on my MacBook, and it was working fine untill it restarted my computer. It booted into my OS X partition and I had a HD labeled "Untitled" on my desktop (it was the partitioned part of my hard drive.) After a while, I got it to boot into Windows, and I have it installed on my Mac with no problems, exept for one: I still have the HD labeled "Untitled" on my desktop (it now contains all of the Windows files.) I just wanted to know if this is normal, or if there's something wrong with mine.
View 11 Replies
View Related
Mar 17, 2009
trying to install windows xp using parallels 5. i downloaded and iso file for windows and i double clicked it and it showed on the mac desktop, BUT parallels wont install windows from that. i am sorry if there is a thread already on this matter. i know i am doing something wrong but cant figure it out since i am new to all this.
View 5 Replies
View Related
