Windows On Mac :: Boot Camp SL On Mini - Share Files?
Oct 26, 2009
I just ran the Boot Camp utility and installed Windows 7 on my Mac Mini. Everything seems to work pretty well. From Windows I can see the Mac partition and from Mac I can see the Windows partition. Each OS has it's own Users file structure. Now, I recently converted over to Mac this month and have over a decade worth of files from my PC that I plan to migrate over. Best-case, I would like to be able to easily access those files no matter what OS I am using. Should I create a 3rd partition for just files? Pick either the Mac or Windows partition to be the master for the files? Can each OS easily use a different folder for the Users files (I know I was able to do it with Vista in the past, not sure about SL).
I've had the new version of the Mac Mini ever since it came out, and just now, I've run into my first major problem with it.So the first thing I did, since I'm a huge gamer, was use Boot Camp to install Windows 7 on my mac mini. It has been working absolutely flawlessly until recently, and I only just noticed this major problem.I rarely use the Mac OS, but now, when I need to for a school project, I can't get into the Mac OS part of my partition.I've owned a Macbook Pro before and I had Windows Vista installed on there via boot camp, as well, and I used to use the method of holding down the alt button on my keyboard to switch between which partitions I wanted to use. Now my problem is that for some reason, whenever I restart, even when I hold down alt, the computer boots straight into whichever hard disk is loaded as my main hard disk. I believe this is because I'm using a Windows-based keyboard, and not a mac keyboard. Does anybody else run a mac with a windows based keyboard and know if there is a workaround for switching up boot disks?
Last night I installed VMWare Fusion and Windows 7 on my Unibody MBP running SL. When I use Fusion, my computer slows to a crawl. I spent a few hours getting Windows set up and installing software last night.
I would like to try using Boot Camp instead, but do not want to lose all of the software and files that I have installed. Is it possible to set up Boot Camp, and keep the same Windows setup?
i'm a HUGE gamer, so the first thing I did once I loaded this new computer up was install my copy of Windows Vista on it using Boot Camp Assistant. The installation went completely smoothly, so I then proceeded to install the Boot Camp Drivers onto my new and fresh and clean Windows Installation.
I restarted the computer and everything seemed to be in working order...but there are two relatively MAJOR problems:
One, the one that is the most pressing, is the sound. When I started up after installing all of the boot camp drivers, I couldn't get a single audio device to get recognized by my Vista Home Premium installation. I tried disabling and re-disabling other drivers in the Device Manager, and when I try to download new drivers for the one audio device that has an error sign next to it, Vista claims that it is already updated to the latest drivers, so it will not install new ones. I even went onto cirrus' website to download their official drivers, and the same thing happened.
There Ive been having problems mounting ISO files whilst In Boot Camp, I have a Windows computer but It's pretty old, I use Daemon Tools there But It doesn't seem to work for A Boot camped Mac.
I launched the Boot Camp Assistant 2.0 on my iMac OS X v10.5. I was hoping to install Windows XP Professional with Built-in Service Pack 3. However, when I tried to partition the disk (32 GB on Windows), a message came up, saying "The disk cannot be partitioned because some files cannot be moved." It states some directions underneath, but, as I am new to Boot Camp and Mac, I don't know what to do and how to do. Please help!
In retrospect, I should have ignored it when Apple Software Update told me about the Boot Camp 3.2 upgrade for my 2006 Mac Pro running x64 Win 7 ultimate. When I ran it, it overwrote my blue tooth driver and my keyboard stopped working. Thanks for the folks at Mac Rumors forums, I was able to go through the procedure to get it working again, and I also had to update the video driver (again) from ATI for my 3800.
So then I decide to reboot into MacOS and discover that my icon for selecting the boot disk was gone, not to mention any directory or programs in the start menu. This happen to anyone else? Do I have to downgrade to 3.1 or does anyone have a recommendation to get 3.2 working?
In my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
Yesterday when I wanted to boot Vista Ultimate 32-Bits on my 20" iMac (late 2006 model) it only gave me BSODs at startup and then rebooted my computer automatically. I tought: OK, let's just erase Windows. So I fired up Boot Camp-assistent and deleted the Windows partition. Today, I wanted to reinstall Windows Vista again, but when I tried to partition my drive with bootcamp, it gave me the error saying that my harddrive could not be partitioned because some files can't be moved. It says I'll have to format my hardrive to 1 partition using the Drive Utility. But I'm very afraid I do something wrong and that Mac OS can't boot anymore. I also don't have a drive to store a back-up of all my files on. Can I just ignore this screen and if I do, will I be able to start Mac OS X normally? I DO NOT want to install Windows after this anymore, guess I will buy a PC for games in a while or go to my friend's house to play Crysis and such.
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
Have the new 15" MBP with i7 Processor. I had another MBP with a 7200RPM drive and installed drive in the new i7 Mac. Computer was working fine until I installed Windows via Boot Camp. I can't boot to the Mac Partition any more, the partition is there but when you try to boot to it you just see the Apple logo and NO circle. I cannot boot to the install CDs or a bootable external drive. I target disk mode the computer and used another computer to boot using the drive in the i7 unit and it's fine and I can see all the information. I tried booting the i7 into single user mode and saw the following message:
I just installed Windows XP to a Boot Camp Partition on my MBP. However, rebooting is a hassle and naturally I want to avoid doing such as often as possible. I think running Parallels Desktop would suit my needs quite well. But here's the catch: I want to be able to use one partition to serve both of those needs. In other words I want have the option of booting through both Boot Camp or Parallels.
How would I go about doing this? I already have a XP installed via Boot Camp. So if there is a method where I don't have to reinstall, great, but I am fine with deleting stuff.
I just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP. I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition? Which is better and why? Also, how much memory should I allocate to Parallels/Windows XP?
hi! i'm planning to install windows 7 64-bit in my mbp, problem is i looked at the requirements needed and it stated that i needed boot camp update 3.1. i checked my boot camp version and it stated that i had 3.0.1, tried using software update, but states that i had no updates available. what should i do? and what else do i have to keep in mind while installing windows using boot camp. thanks in advance!
I use to be able to select the vista partition to restart into from the configuration pages in leopard on my macbook pro, but now my bootcamp partition is missing. I have to hold the option button to manually select the windows partition and then load into windows. Some setting somewhere must be lost. Does anyone know how to restore it?
This is my first post here... even though, I've read a lot of the things on this forum, but never decided to post a question 'til now... now that i bought a macbook pro that is.
Actually I have some sort of annoyance with boot camp. It works as it's intended (with windows 7, which is a miracle, because everyone complains about that combination). But whenever I boot up and press "alt" to select the hard drive i want to boot, it always shows Windows. Can i change it for something else? and, how can I do it? Both of my partitions have names of their own... they're not generic... but still, they are not working, what can I do??
I'm trying to install Windows 7 and can't get the boot camp assistant to partition my drive. The drive in question is 500GB with over 200GB free space. I want a Windows partition of 35-40GB.On first attempt I kept getting the cannot move files error when trying to partition. I read up on the error online, and most people suggested issues with parallels or needing to use idefrag. I had parallels on my machine at one point, but am not sure if there are any problem folders still hiding somewhere. Any tips on that part?I ran idefrag overnight last night. When I booted the machine up this morning, I launched it again to verify that the disk was defraged. Boot camp still doesn't want to play.
I have a Macbook Pro and I'm hoping to install Windows Vista via Boot Camp. Is it possible to do this with a Dell reinstallation DVD that came with my Dell laptop?
1 - I have an early 2008 iMac 24" and ordered Snow Leopard disc from Apple 2 - After installation of Win7 64 bit and problems with boot camp 3.1 drivers support then tells me my computer will not run windows 7 64 bit and sends me a list of non-compatibles. Sure enough mine is one.
3 - Several respondents help me and it appears that 64 bit will run but still trouble with keyboard/mouse.4 - uninstall 64 bit and install 32 bit and related boot camp drivers5 - numeric keypad on apple keyboard still does not work with office 20106 - just tried to update drivers for win 32 but it says more current ones are installed??? I guess that is from the attempt to install 3.1 for win 64 unsuccessfully?7 - Now support lists computers that will not run windows 7 and mine is not on that list.
right now i'd be a happy camper if someone could just tell me how to get the Apple keyboard that came with my iMac and the numeric keypad working when in Windows or Office.
My mac mini (2010) has started to not show up CDs lately. I insert an audio CD and it comes up with a message that I have inserted a blank CD. When I do the same in Boot Camp (windows 7) it works fine. I am running Lion. This didn't happen when I installed Lion, it happened only in the last couple of weeks. I tried the method in one post about creating a new user account and trying from there, but to no avail.
I'm trying to set up a dual boot, Windows 7 64-bit and Lion install on a 2011 Mac Mini. I have Windows installed and completely up to date, with up to date Boot Camp drivers. Unfortunately, I get no sound from the internal speaker or by plugging headphones or speakers into the speaker jack. I do hear the startup chime on boot, and have sound in OS X. Windows thinks it has the right driver for the sound card, and lists Speakers - High Definition Audio Device in the Playback tab of the Sound control panel, and it is the default device. If I click "Test" the level bounces as if sound is being output, but I hear nothing.
As a test, I found I do get sound out of the HDMI port when I plug it into my TV, but this computer will need to be in an office with either stereo speakers attached or using the built in speakers in the mini.
On Windows I noticed there was an icon in the bottom right (next to the clock) that I could right click and then restart in Mac OS X. Is there a similar thing for OS X that I can just click in the menu bar and restart in Windows?
So i installed windows 7 on my macbook (not aluminum) and when i go to install the boot camp drivers off of the retail leopard CD i get an error that says that I can't because it only installs on vista or XP. My laptop came with Tiger CD's so i can't get them off of there.
I am trying to set up a Parallels 4 VM for a Windows 7 x64 Build 7000 boot camp partition, but parallels tools will not install. Half way through the process, a windows unsigned driver security box pops up, and when I tell it to install anyway, it still rolls back the installation process and I get the message "An error has occured while installing parallels tools, click OK to restart your computer and try again." or something to that effect. I have tried this about 15 times, and I have tried uninstalling/deleting the VM and re-creating the VM to no avail.
What I want to know: Is there a way to manually install Parallels Tools while running in the boot camp partition, just like installing any other application? I want to install it outside of Parallels, since for some reason it keeps screwing itself up when trying to set up the drivers as a VM.
I was able to get Windows Vista 64 running on my 17" MBP, it is pretty slick. I set aside 32 GB for Windows, ran the install, loaded all the appropriate Boot Camp drivers and everything is working perfectly in Windows. I boot back to OS X to attempt to configure Parallels...
So I fired up Parallels and follow the guided instructions. However, when I get to step 2 Im not sure what I should be doing. I already have Windows on its own partition, but Parallels is asking me for a CD/DVD image. Im a little leery of putting the Win disc back in, I dont want Parallels to always want to boot from the disc. how do I tell Parallels to load Windows as a Virtual Machine off of the Boot Camp partition?
The partition Boot Camp created now appears on my Desktop in OS X as Untitled, I can not, for the life of me, figure out how to change that. If I eject that volume will I still be able to Boot to Windows? Will Parallel still work?
