I have installed Fusion 2 in the past and was going to install a boot camp partition so Aero would properly work. However, i am having a lot of trouble getting boot camp to work. So i was wondering are there an major advantages to having a boot camp partition over just having Fusion installed?
View 1 RepliesI have Vista 64-Bit installed via Boot Camp and was wondering if it was possible to then install Fusion with Windows XP because I have some older software which is made for XP.
So basically can I have Vista Boot Camped and Windows XP Fusion running on my Mac?
i tried to install bootcamp while i still had vm ware fusion but i got that error saying backup the disk, format the drive into mac osx journaled and restore info back to that disc. So i uninstalled vm ware fusion and got the same error again but when installed vm ware fusion again the windows account was still there with all the files on it.
If i completely remove the windows account from vmware fusion and then intall bootcamp will it work if so how do i remove it.
Last night I installed VMWare Fusion and Windows 7 on my Unibody MBP running SL. When I use Fusion, my computer slows to a crawl. I spent a few hours getting Windows set up and installing software last night.
I would like to try using Boot Camp instead, but do not want to lose all of the software and files that I have installed. Is it possible to set up Boot Camp, and keep the same Windows setup?
I know with Boot Camp, you need to create a partition and install Windows on it. Is the same true with Fusion? Or during the install process, Fusion will create the space needed?
View 6 Replies View RelatedAlright, so I've installed Windows 7 RC on my iMac with Boot Camp. Booting straight into Win everything works fine (I had some issues trying to connect my Wireless Keyboard and Mouse, but it's fine now). I have 3 issues:
1. Firstly, is there any way for me to access my files stored on the Mac partition in Windows (e.g. Music, Videos etc.)? I tried using HFS+ Explorer but it I get stuck at the 'AutoDetect Partition' phase because it says "No HFS+ Partition found". Any ideas?
2. Now I've also got VMWare Fusion running on my Mac, and when I start it, it detects my Windows partition and so I load Windows through it. The OS loads up fine, but for some reason it doesn't detect my WiFi adapter and so the Internet in Windows doesn't work (it works fine via Boot Camp). Is this normal (since maybe the WiFi is already connected through OS X so won't work in Windows at the same time)?
3. Lastly, I've installed the VMWare Tools in Windows, and it seemed to go on without a problem, but for some reason my 'Unity' option doesn't work. The button is there, but when I click it the Win7 window disappears. I figured, OK, probably just loading or something, but nothing happens. The VMWare main screen still shows that Windows is 'Powered On'.
I have recently got my first mac, and unfortunately I do have to run Windows-only software at school.
Is it possible to have a Boot Camp partion and a Vmware Fusion at the same time, so that I can run the "small" applications using Vmware Fusion and the applications with high system requirements using Boot Camp?
When I got my MacBook 1 1/2 years ago, I made a Boot Camp partition that I thought was 32 gigs to use with Fusion. I'm not doing much on Windows, but all my financial stuff is on MS Money, so I needed to have a way to access it. Over time, it seemed that the partition was getting smaller. Although (I thought) I'd allocated 32 gigs, the Windows partition was only 5.9 gigs, and I only had a few hundred MBs of that to work with, and Windows is constantly telling me I'm running out of space. So, I've been trying to figure out how to expand the partition.
I used Winclone successfully . . . except that because my Windows partition was formatted in FAT32, it went back to the original size of 5.9 gigs. Then, I followed the instructions to boot into the Windows HD and convert it, but when I went to do that, nothing happened. (I clicked on the Windows HD, and the screen went blank.) After that, I resigned myself to re-installing Windows and making the conversion then. The XP CD went through the whole set up and then said there was a disk error and wouldn't do anything.
I don't know what to do next. I have my xp partition back up, via Winclone, but I still have no space. I'm not that computer savvy, and I don't want to keep messing with it, but the current setup isn't sustainable.
I'm currently running Parallels 3.0 (XP Pro) off of a Boot Camp partition on my Macbook Pro. I'd like to give VMWare Fusion an audition, and am wondering if I can run it off that same BC partition that Parallels uses -- or if that will create some kind of conflict that might damage the partition. I'm not talking about having Parallels and VMWare running _simultaenously_ -- only installing them both to use the same partition.
View 8 Replies View RelatedI installed Vmware Fusion 2 awhile back and liked how I could share the pictures and music folders between my Mac (which they were stored on) and the Vmware Fusion 2 Windows install. However, i was disappointed on how sluggish it was. So I (after some initial trouble) partitioned my hard drive and installed Windows 7 on the Boot Camp partition. However, now i cannot share folders between my mac and windows. Is there a way to do this?
View 4 Replies View RelatedI have recently set up Boot Camp on my new iMac. If I install VM Fusion and set it up from my Boot Camp partition, can I access files using either BC or Fusion?
For example, I plan on running Microsoft Money, sometimes I would use it in Boot Camp but other times I would use it on Fusion. Would I have to install the software twice and each time copy the money file over from one to the other? I'm hoping that everything on Windows would be identical on Fusion and BC but I don't know if it works that way.
I guess an easier way to ask the question, if I download an internet file onto the desktop in VM Fusion, would it show up on the desktop when I load up Boot Camp and vice versa?
Hello, everybody. I just discovered this forum, having finally taken the plunge and bought a Mac Pro to replace an aging Dell PC. (My wife has had a MacBook Pro since early last year, which is what convinced me to switch.)
My main use for the new machine will be photo processing, including astrophotography. I will obviously be able to use Photoshop natively, but will have to use Windows for one or two astro packages (and also for occasional use of an old Windows version of Mathematica).
So, my questions:
Am I right to think that it is possible to install Windows with Boot Camp and then also use the same Windows install under Fusion? If so, is there anything special that needs to be done when first doing the Boot Camp install?
Is it possible to use both Boot Camp and VMware Fusion to access a particular virtual Windows PC? And if so, which should I set up first?
View 13 Replies View RelatedI am going to the University of Georgia next year. I am buying a Mac, but I will need to run Windows for a test program called sofTest. According to UGA, sofTest does not work with VMware Fusion or Parallels, only Boot Camp. If I create a Boot Camp partition and install Fusion on that partition, can I still use Boot Camp when I need to?
View 4 Replies View RelatedI currently have a boot camp partition w/ windows vista (I know...) but recently got Windows 7 running on Fusion. Windows 7 is, I believe, only a virtual machine and not a partition. (?). If I un-partition my HD using boot camp, which currently only has vista, will it effect my Win7 OS? Or is Win7 on my Mac HD?
View 2 Replies View RelatedI have a problem with my boot camp and vmware fusion. For some reason my internet won't work when I am on vmware but it works fine in boot camp. I look under hard ware manager and it says the ethernet controller isn't installed but i dont know where to find the driver for it. I've tried reinstalling vmware, deleting the virtual machine, uninstalling/reinstalling vmware tools and under setting Connected is checked and i have it set at NAT and have tried all the other options.
View 2 Replies View RelatedJust purchased a Mac Pro (my first Mac after being a long time PC user) and need some advice for carving up the disk partitions to run some other operating systems on an additional 500GB Seagate HDD.
I want to run Windows XP on a 100GB partition of the Seagate drive and use the addition space, about 380GB, to run Solaris and Linux for work specific simulation programs via VMware Fusion. I know I could run some Linux programs on OSX, but I�m trying to keep work and personal data completely separate.
I installed XP using Boot Camp with no problem on the 100GB partition and left the rest of the disk as Free Space.
My problem is getting the Free Space partitioned so I can use it to host the other OS�s running VMware Fusion. When I use the disk utility to partition the rest of the disk, it goes into �Modifying Partition Map� and hangs. I left it on all night and it didn�t finish.
Is there an easy way to make the 380GB left on the Seagate drive usable for the OSX or do I need to do something different? I�d like to avoid re-doing the Boot CampWindows layout since everything is working great on that side.
In retrospect, I should have ignored it when Apple Software Update told me about the Boot Camp 3.2 upgrade for my 2006 Mac Pro running x64 Win 7 ultimate. When I ran it, it overwrote my blue tooth driver and my keyboard stopped working. Thanks for the folks at Mac Rumors forums, I was able to go through the procedure to get it working again, and I also had to update the video driver (again) from ATI for my 3800.
So then I decide to reboot into MacOS and discover that my icon for selecting the boot disk was gone, not to mention any directory or programs in the start menu. This happen to anyone else? Do I have to downgrade to 3.1 or does anyone have a recommendation to get 3.2 working?
It says that the drive has changed and I have to unmount and then remount it, but i don't really know how to do that and it doesn't seem to work
View 4 Replies View RelatedIn my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
I have an '08 Octo 2.8.
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
I have Windows 7 installed in VMWare fusion. Is there a way to directly boot from that installation into non-virtualized W7? Would bootcamp or something be able to read and boot from that installation?
I want to boot directly into W7 for gaming. The virtualized performance isn't really cutting it.
I am having trouble booting up my windows 7 bootcamp, whenever i try to bootup it would give me some screen right after the windows logo and it'll say to repair or somthing, is this a common problem?
View 3 Replies View RelatedThis is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
View 3 Replies View RelatedHave the new 15" MBP with i7 Processor. I had another MBP with a 7200RPM drive and installed drive in the new i7 Mac. Computer was working fine until I installed Windows via Boot Camp. I can't boot to the Mac Partition any more, the partition is there but when you try to boot to it you just see the Apple logo and NO circle. I cannot boot to the install CDs or a bootable external drive. I target disk mode the computer and used another computer to boot using the drive in the i7 unit and it's fine and I can see all the information. I tried booting the i7 into single user mode and saw the following message:
efiboot loaded from device: Acpi(PNP0A03,0)/Pci(1|1)/Ata(Primary,Master)/HD(Part 2,Sig********-****-****-****-************)
boot file path: SystemLibraryCoreServicesoot.efi
.Loading 'mach_kernel'...
................................................................................
I just installed Windows XP to a Boot Camp Partition on my MBP. However, rebooting is a hassle and naturally I want to avoid doing such as often as possible. I think running Parallels Desktop would suit my needs quite well. But here's the catch: I want to be able to use one partition to serve both of those needs. In other words I want have the option of booting through both Boot Camp or Parallels.
How would I go about doing this? I already have a XP installed via Boot Camp. So if there is a method where I don't have to reinstall, great, but I am fine with deleting stuff.
I just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP. I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition? Which is better and why? Also, how much memory should I allocate to Parallels/Windows XP?
hi! i'm planning to install windows 7 64-bit in my mbp, problem is i looked at the requirements needed and it stated that i needed boot camp update 3.1. i checked my boot camp version and it stated that i had 3.0.1, tried using software update, but states that i had no updates available. what should i do? and what else do i have to keep in mind while installing windows using boot camp. thanks in advance!
View 1 Replies View Related