I am trying to reformat an iBook for a friend. Everything was running, but, there was no chime on boot. I logged into the machine, and was checking files and folders when it locked up. It actyally locked up while trying to run Microsoft Word. It now boots to a grey screen the the little "spinning" thing, and then, instead of going to the login screen, it just turns blue. It will NOT boot into Safe Mode, it will NOT boot to the iBook Install CD, I just get the same blue screen using both methods. I used Command-Option-P-R without success. I booted to Open Firmware and typed reset-nvram without success. I don't know what else to try. I am copying her files right now by booting into Target Disk mode, but, once I get that done, I still won't be able to boot the install disc to get the system wiped and reinstalled. What else can I do to correct this?
My ibookG4 won't boot past the blue screen. I have run fsck several times in single user because it won't boot in safe mode. Every time it comes back **** FILE SYSTEM WAS MODIFIED **** and never that the volume is ok. This blue screen problem occurred after trying to hook up a wireless router and changing settings in airport. If anyone knows how I can fix this.
I hardly ever turn off my Macbook unless i need to - I just close it and use it whenever i need to. I let the battery run dry as Apple suggests to do every now and again, and turned it on the next day. It started to boot and took a little longer to get past the grey apple logo and loading circle and then froze on the blue screen. I can control the mouse, but every few seconds it changes to a darker blue, cursor disappears but returns after a second or two. I've tried:
- Booting into safe mode (Same thing happens) - Booting from CD and repairing permissions (Said everything was ok, same thing happens when I booted) - Single user mode (used some commands from an Apple page and restarted)
I can however boot into windows perfectly fine, which leads me to suspect it's a corrupt log in item. I'd like to know for sure it's not a hardware problem so I don't have to take it into an Apple Store.
My imac will not boot past the blue screen. It crashed whilst loading a new application which I downloaded from the mac website, had to force a shutdown as it wasn't responding, and now it will not boot no matter what I try. I have searched for answers on the forums but my mac will not respond to any keyboard commands even with the installation dvd inserted. I don't get the startup chime anymore either.
I have an iBook G4 1.07 GHz 30 gb 256 RAM with Panther. It was working fine until my HD got close to being full. Now I can't get it to boot past the Apple screen. It will either freeze there, or move on to the blue screen and freeze before the progress bar enters. I want to re-install Panther but I can't get any CD to boot during startup by holding "C", including the Panther OS CD, the Hardware Test CD, or the Tech Tool CD. I am able to boot to single user mode, where I type fsck -fy, and I recieve no errors with the hardware. I had this issue beore and my HD had to be replaced by Apple.
I'm trying to resurrect an iBook (translucent white case, 14.1 LCD) that was long neglected, so not sure on its past service history. The following do NOT work: - won't boot up past the gray screen with Apple logo and spinning gear icon (just hangs) - same problem if I try to boot from install DVD ("c" or using "option" then selecting DVD) - same problem with safe boot with "shift" - reset PRAM It will connect via firewire target disk mode to another computer, and I used that to completely wipe the disk and do a clean install of 10.5. When I tried booting into single-user mode (cmd-s), it fills about 2/3 of the screen with normal-looking messages, but then hangs after this (no keyboard response): Got boot device = IOService... [various other stuff] BSD root: disk0s6, major 14, minor 5 I'm out of ideas. Any suggestions? The machine is old enough that it's probably not worth the diagnostic fee of the local Apple shop. Since I can't get it to boot, I can't even run TechTools.
I've searched this problem on google for the past hour or so and have had no luck whatsoever. I have an Ibook G4 14" and I think it's like 1.2 CPU. A while back the Ibook stopped working and left me with a grey screen and finder icon with flash quiestion mark. I searched the net for a solution for that and what came back was that I had a dead harddrive. Okay fair enough, I've just replaced the drive with the working one from my Mac Mini, i repeat the WORKING drive, I know it works. So I start up the Ibook and hear the chimes, the screen flashes black white black and then stays on white. I have reset the PRAM and eject disk works but no other key commands, I cannot boot from installer 10.4 cd (a new one I bought, not the bundled one), I can't go into target mode as I have no firewire and leaving it alone for a while doesn't help.
After installing an app ('Detour') I was asked to (or it was suggested that I should) restart my computer. I did so, and now my 1.33GHz iBook G4 turns on - but it will not go any further than a blank blue screen (after the initial grey screen that appears.) Thankfully, all my data is on an external drive. I keep my music and footage which I have shot on there amongst other things. I also have a backup on my external via Time Machine of all my data which I keep on the iBook drive, so nothing should be lost.
I was given an ibook g4 a1133 but when i boot it all i get is the blue screen with acursor on it which i can move and nothing else.It gets past the loading osx then thats when i see the blue screen, have tried ti install linux but do not seem to be able to boot from the cd using the c key nothing happens .As I am new to macs I need some help if that is possible, so any advice would be appreciated I have no discs with it so am unable see what os version is installed or any information at all, that so far I have been able to get.
I am running OSX 10.5.7. Installed it several weeks ago. This morning, the computer was acting up a bit. For instance, in my wife's account, I couldn't access our shared iTunes library, getting the error saying it was locked. When I rebooted, suddenly I couldn't get into the machine. It just hangs on a blue screen. I've tried booting with the shift key down, and that didn't do anything. I also tried cmd-s, but don't know what to do with that at the prompt, and cmd-v, which works fine, but just dumps me into the blue screen again.
I have a bootable FW drive, and I can boot fine off that, and even see the internal drive. I've opened files on the internal drive -- it all looks intact. But I still can't boot from the internal drive. I've tried Googling for solutions, but if you google "hangs on blue screen" or bsod or whatever around OSX, you get a bunch of hits related to installing 10.5.7, which isn't my issue, and you also get articles from 2006 and 2004, etc. I was hoping it was some sort of permissions thing, but I am not really sure.
My MacBook pro starts up then goes to the white apple screen but after that the whole screen turns blue and has a round loading thing that does not stop spinning and thats all it does. The computer does not turn on past the blue screen?
I have an iBook G3 Clamshell 466MHz with 192mb RAM and 10GB HD. I recently updated the OS from 9.2.2 to Panther on a single partition. The upgrade went flawlessly.Then I purchased a 512mb RAM module from a 3rd Party Vendor and after fitting it discovered the iBook no longer boots past the flashing folder/?.
I removed the new ram and replaced the 128mb module but haven't been able to boot past this flashing folder/? icon. I've zapped the PRAM, reset Open Firmware, disconnected the Keyboard then booted, reset the PMU (need to do this each boot or I see black screen only) and tried to boot from the Panther Disc #1 holding the 'C' key. I also tried TDM with my Intel Mac Core 2 Duo but couldn't boot past the flashing folder/? icon.
just installed 10.5.6 on their last gen. iBook.She left the iBook plugged in to the mains and came back to find that the iBook was alternating between the grey Apple screen and a light blue desktop screen where she could see the cursor. Sometimes it would also switch to a blue screen without a cursor.
I've tried holding shift during startup - no effect. I've tried rebooting NVRAM - no effect.
last night i changed the permissions on my macbook to stop my files being shared. now when i log in i cant get past the grey boot up screen. i was told its because of problems created from changing the permissions. i booted up holding shift and nothing happened i booted up in in verbose and it says theres no posix_spawnp("/usr/sbin/mDNSresponder", ...) over and over i booted up with cmd+s and got If you want to make modifications to the files
/sbin/fsck -fy /sbin/mount -uw
If you wish to boot system exit. I dont want what to do here, Im afraid to start messing with it. I really need to get the files in my HD, I'm doing finals right now!!
My mac was shutting down and it took sooo long (blue screen with the spinning loader). I never experienced this, cause normally the dock would vanish and my mac would shut down instantly. But this time it kept showing a blue shutdown screen, so I decided (after about 2 minutes) to hold the power button and force a shutdown. The next time I booted the mac it showed me the gray boot screen, with the spinning wheel and a gray loading bar, which I think is indicating a firmware update or something that has to do with my forced shutdown. But the bar gets to about 1/8 and then vanishes. The spinning wheel stays, but nothing else happens. It just hangs and keeps spinning forever.
I have one of the old blue PowerMac G3 computers, and I kept getting a kernel panic, so I reset the RAM and now when I start up the computer, it stops at the apple screen without even spinning. I've tried booting it in single user mode, and for some reason it doesn't make a difference what keys I hit while turning on the computer. It still boots to the apple screen.
My wife has a Macbook with an Intel Core 2 Duo processor (Macbook4,1). I am trying to replace the original SATA hard disk (160 GB) with an SSD. I have two SSDs here with me:
1) Intel 320 series, 160 GB
2) Crucial M4, 128 GB
In both cases, after replacing the hard disk with the SSD, I am unable to get the Macbook to get any further than the "Mac sound" and grey screen.
In my first attempt, I cloned the original disk to the SSD on another computer, verified the data got on there OK, and installed the SSD into the Macbook. In subsequent attempts, I just formatted the SSD to see if the Mac would recognize it at all.
When the original hard disk is installed, and my Snow Leopard install DVD is in the DVD drive, during the boot, I can hold down the option key and get a boot choice of booting from the hard disk or the DVD. With either SSD installed, when holding down the option key I get no choices at all, it just sits there (it does access the DVD for a few seconds but then nothing).
I have another 160 GB "regular" hard disk here as well and when I install that I also get the choice to boot from the hard disk or the DVD (although booting from the hard disk does not work since it's a hard disk from a PC).
combination of Macbook and SSD, installing into the hard drive bay? I've seen many posts from people who have had success putting an SSD into their Macbook so I am assuiming it's possible.
I was having trouble submitting an assignment on the American Military University website. After I finally submitted and verified my submission was successful, Finder popped open a window, without being prompted, with a specific part of my "private" folder showing. In the info window it showed that I had read only privleges, but that a user named "wheel" had permissions. Thing is, there is no such user. I am the sole user, and that is not my user name. I panicked, thinking I was being hacked, and moved the entire "private" folder to the trash. It was over 5 gigs. I had to input my admin password after dropping the folder in the trash. Then, my system froze. Now I can't get past the grey boot screen with apple logo and spinning wheel.
I've tried zapping PRAM. I ran disk utility from both the install disk and the startup disk for live verify. NO errors found. Still won't boot. I tried safe mode, and got a status bar below the apple logo but it vanished before filling completely and then the MacBook just continued to hang there spinning the wheel without a status bar. Tried rebooting while holding shift-command-v and got to watch as the computer tried to boot in safe mode, but I got the following messages before the darn thing just began to hang there again:
getaddrlinfo(): node name nor username provided, or not known getaddrlinfo(): node name nor username provided, or not known getaddrlinfo(): node name nor username provided, or not known getaddrlinfo(): node name nor username provided, or not known launch_msg(): Socket is not connected launch_msg(): Socket is not connected
Today I was using my MacBook 2008 aluminum, and I ran out of battery so the system shut down the computer to save the files. I plugged in my computer to start it up but the screen turned grey for a while. I shut down my computer and turned it on and it started up to the grey login screen but it won't let me boot passed it. I have tried to get passed it in safemode but it did not work. I have tried to repair my hard drive and my permissions and reinstall osx lion but it didnt work.
I have a mirror door g4 power pc that had been having some issues with not turning on, and after testing the power supply, it failed miserably. We placed a refurbished power supply in it from a company in New York and the computer was working wonderfully. I went on a cruise last week and went to turn the computer on for the first time in a week and a few days. The CPU turns on, the unit chimes, the fan turns on and the computer starts to boot up, but it won't boot past the gray apple logo screen. Actually, the first few attempts to boot it resulted in a blue screen with gaint apple logo and spinner; it wouldn't advance further. After several restarts and resets, I got it to come up into the normal gray screen. On several attempts it wouldn't boot further than this. On two occasions now though, it has moved past the gray screen to normal operation (it takes about an hour for it to get to that point though) but with some kind of errors. I get the side bar, but the gray panel on to with "file" ect is gone and my HD icon never comes up. The icons on the sidebar do not respond when clicked. The computer will not boot from the OS X disc.
I'm trying to repair a Powermac G5 (dual 2.0, the first model I believe, with a new Radeon 9800 graphics card) that won't boot and I'm having some problems that I can't seem to diagnose.
The machine will boot to the openfirmware prompt or target disc mode and will show the 'OS not found' icon if left to boot from the HD (which has been wiped). If I try to boot from either the included restore disc or a retail 10.4 DVD I've tried it will show the boot screen with the Apple logo on it but no spinning status indicator underneath. It just freezes on that screen. Once it showed the status indicator but it just continued to spin for about 30 mins, at which point I gave up. Same issue if I try to boot the hardware test (except it freezes on the hardware test loading icon rather than the Apple icon). The superdrive appears to work as it is accessible in target disc mode.
I've reset the SMU and reset the PRAM via the keyboard shortcut. The one thing that leads me to think it's a firmware fault is that when I run the 'reset-nvram' command it gives an OK, but when I then run 'reset-all' it freezes rather than rebooting. Any ideas anyone?
So bare with me I want to be thorough so hopefully someone can help me out. My MBP (08) will not boot past the grey screen. The wheel just spins infinitely. I've read about it trying to figure it out.
1) I tried to boot from the install disc, when I do there are weird diagonal lines and the thing is unreadable. 2) I hooked it to my Mac Pro in target disc mode. I was able to get some of the information off, but it would eventually freeze up and freeze the finder on the Pro. It wouldn't verify the disc in disc utility. It would freeze if I tried to repair the disc. 3) It won't boot in safe mode or single user mode (CMD + S) 4) I tried removing the ram and switching it and using only one stick of ram (to make sure it wasn't a ram problem). 5) I tried to boot without the battery
Needless to say I am a bit frustrated. My applecare is long gone and there is no apple certified repair place anywhere near here. I've also noticed the thing is very hot. If nothing else I'd like to have an idea of what I should be expecting from the repair place.
At the tech dept we have this G4 that refuses to boot past the grey screen with the rotating wheel. The logic board has been replaced, we've removed all sticks of RAM save 1x512, we've tried a known working optical drive, replaced ribbon cables (optical cable was frayed on one end) No dice. Option booting works, but once we select the DVD we can't boot from an install PPC CD either, it just gets stuck at the grey screen. We also have a tech HD inside that the computer does not boot from either.
When I woke up this morning, I went on my macbook (which had been running overnight) and everything was running sluggish. I'd switch between programs and it would hang there for a couple seconds. So after closing all the software and it still doing that, I decided to restart. It wouldn't shut down, and eventually I had to force a hard shut down. When I turn it back on now, it won't go past the white screen. Nothing I've done will make it go anywhere. Holding down option only makes a cursor appear. I tried a tip I read about holding the power button down until the light flashes, and that hasn't helped either.
I've plugged the drive into my XP machine, and it doesn't show up in explorer, but does show up in disk utility. I installed the program TransMac that is supposed to let you access Mac formatted drives, and while the drive shows up in there, when I try to get to it, it says Error reading Mac Disk. So basically, I'm pretty sure the drive is failing. Now I need to know what I should use for recovery software. I've never had to recover a mac drive (I've been a mac convert for less than a year), and any file recovery software I have is for NTFS drives. So what software can I run on windows to recover a Mac formatted drive?
I recently required a Power Mac G4, and it was working fine, albeit a bit slow but I just assume that was because there's too many files on it, but that's another story. I shut it down before I left work, when I came back in the morning it was just the grey screen with the apple. I reset it, still no response. I reset the PRAM, nothing. I tried to boot in Single user mode, nothing. I tried to boot in verbose mode, nothing. I force ejected the CD and put in an OSX disk one from my laptop, asked it to force read by restarting and pressing "C" and still nothing. I am not sure if a cable inside has been jarred lose.
I was given a PowerBook G4 15" today. I need to fix it, but I can't find out what exactly is wrong. I've used MROOGLE and I can't find any problem quite like what I'm experiencing. In my case, the laptop will turn on, make the chime, and stay stuck on a white/grey screen. No apple, no spinning gear, no nothing. Just a blank white/grey screen. However, when I insert the Leopard DVD and hold down "C" the apple appears as well as the little spinning gear. That goes on for a few minutes. BUT, after those few minutes are up the small gear still spins, but the Apple logo is replaced with a prohibitory sign (like what you would see on a non-smoking or no parking sign) and it sticks there and sometime says that I need to re-start my computer. The same happens with the Tiger disk. Also, when I place the Leopard or Tiger disk in the SuperDrive and hold down "option" so that I can boot OS X from the DVD, I click the little continue arrow and nothing happens. I've reset everything there is to be reset, and I've opened up the computer and re-seated everything that could possibly be re-seated. RAM, HDD, all connector cables, etc. There isn't any visible physical damage inside of the computer either.
The most recent thing I've tried was to boot off of a PPC-specific Ubuntu disk. It does some stuff and lets me run the kernel, but after that the computer gets stuck on a black screen and does nothing at all. I'd really appreciate it if you all could offer some advice as to what may be wrong. All suggestions and ideas are welcome too.
I have just finished moving my G4 Sawtooth from one house to another. I shut down my machine properly at the one house carefully moved everything over and re-attached the peripherals. Fired up the machine and was greeted promptly with the Apple boot screen and spinning thingy. Then it spun and spun and continued to spin some more. After about 10-15 minutes my desktop backgrounds appeared on the dual monitors, but then sat there like that and no finder ever appeared. After waiting about another 5 minutes, I shut off the machine by holding down the power button. I waited about 10 seconds and powered it on again. Same thing, but this time it just sits at the grey Apple boot screen with the thingy spinning forever. Then I noticed something unusual.
I could hear one, or both of the internal hard drives park the heads and spin down like it was going to sleep. I hadn't noticed that before, but presume it was doing it all along. Meanwhile the computer kept spinning away on the boot screen. I thought, great my drive has crashed and burned. So I removed it and attempted to mount it on my G5 using an external ATA-USB adapter. It mounted without a problem and I was able to see and copy all of the files. So then, I took a spare drive I had with a valid bootable OSX Leopard install and put it into the G4. Fired it up and lo and behold, the same problem. The drive spins up, the machine shows the apple boot screen and keeps spinning the thingy, then after a bit of time the drive parks the head and spins back down. I'm stumped and would like some assistance in resolving this problem. Any suggestions? Oh, and yes, I've tried reseating all cards and memory and disconnected all peripherals.