Safari :: It Can't Connect After Latest Lion Update
Apr 2, 2012
Just updated my software and now safari can't connect to websites. It connects for a bit then after awhile it will no longer connect. Firefox and Chrome are connecting fine so this is a safari only issue with the latest update.
Safari Version 5.1.5 (7534.55.3)
Quiting safari and restarting works for a little while then eventually 'can't connect to server' eventually appears. I'm going back to firefox until this is resolved.
Info:iMac
View 7 Replies
ADVERTISEMENT
Mar 14, 2012
Installed software update for MAc OS X, Safari and iTunes but Safari chrasches every time when starting up the program.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
View 1 Replies
View Related
Feb 15, 2012
I'm running Lion 10.7.3 on my iMac and Macbook Air.I upgrade 1Password to the latest build (3.8.16) on my iMac last week but didn't use safari on it until yesterday when I noticed that Safari just opens blank with a spinning beachball? Not a major problem as I've been using my Air..... but just now when I also upgrade 1Password on the Air, Safari stops working and same issue.Firefox works fine.
View 1 Replies
View Related
Jun 17, 2010
I updated safari (and now I did OSX, and its still slow) and performance is slow, unpredictable and randomly dies. The network is perfect though and this issue does not happen in transmission.
View 2 Replies
View Related
Mar 12, 2012
Today a new auto-update came up and I ran it - it included a tweak to 10.7.3 as well as Safari and a few others. My Safari (5.2) got completely trashed. Will not even open any more - all it does is crash immediately upon launch. I have a Time Machine backup from about 40 minutes earlier I can recover from if needed. Meanwhile I'm lucky I have a MacBook Pro as well, and am able to get online while I am completely restoring Lion from a patchstick.
I'll post the crash report (I copied and saved it) once I get back up.Incidentally, I've been getting a lot of crashes in Mail as well. Always when the computer is asleep. Anyone else having these problems - or have a solution?
Info:
iMac, Mac OS X (10.7.3), i7 - 27" 2.93GHz
View 12 Replies
View Related
Dec 16, 2008
I'm getting a prompt to install the latest update for OSX and Safari. Can download it okay but when it gets to 'configuring' it stalls. Not doing anything. I have to hold the power button down to shut down then start the system up again. This has happened three times. Anyone else have this? Anyone know what is up with it?
View 3 Replies
View Related
Mar 14, 2009
I have a MacBook Pro, about two years old, with no probs up until last night when I accepted the latest Apple Update ( itunes, security, etc ). That's when all the problems started. Now I can't get into Mail or Safari, & after getting no response from either, I am having to do a "force quit" to get out of either of the applications. I am getting the same error message each time PubSubAction has quit unexpectedly. Does anyone know what this actually means? I asked the guy at the Apple Shop & he had no idea, & the other people working there had never heard of it either. It just seems very sus that as soon as I downloaded the latest updates these two apps begun having problems. Prior to my updating, I had sent off emails, done the banking online, paid bills & checked my items on eBay. Nothing terribly much & definately didn't accept any files- except the apple updates, when I rebooted, etc. Once the computer rebooted, it now takes between 5 to 10 minutes to start up. Anyway, being that I'm pretty much puter illiterate & a helpless female with these matters as well, just wondering if anyone out there ( female and male ) can offer any suggestions or advice on this problem for me please.
View 11 Replies
View Related
Mar 14, 2012
How do I Update my Safari to the latest version if I have Mac Os X 10.5.8.
Info:
Mac Pro, Mac OS X (10.5.8)
View 2 Replies
View Related
Nov 20, 2010
Once i installed the latest safari update and the computer restarted, my date settings were changed to December 31, 2000. Also, random programs popped up, asking if i should allow or deny them. As well, i was disconnected from the internet. I'm not quite sure what has caused this.
View 1 Replies
View Related
Jul 1, 2008
I had Safari 4 dev preview installed then i removed it after installing 10.5.4 because i needed some plugins that wasn't working, the problem is that when i uninstalled it using the uninstaller in the dmg i got Safari 3.1.1 no problem i thought... But i was wrong.I wanted the latest version of Safari 3.1.2 so i went to software update in os x didn't find it so then i went to Apple's Safari site and downloaded the latest safari image they had when i was going to install it on my MacBook i can't because the system says i don't have 10.5.2 which is required but i have 10.5.4!! So i then uninstalled Safari 3.1.1 thinking that i then could install 3.1.2 but no now i can't install Safari
View 6 Replies
View Related
Mar 27, 2012
Is there a simple way to update lion to the latest version? I shouldn't have to pay when my new mac air shipped with lion right?
Info:
MacBook Air, Mac OS X (10.7.2)
View 4 Replies
View Related
May 23, 2012
downloaded the newsest updates from Apple and now my computer won't start up. Goes to long in screen and won't let you type in pass word. Spinning Beach Ball of Death comes up and never stops.
I just keep shutting it down ( push off button on the back until it shuts off) and trying to start it again. Some times it will let you get a little farther, but always after 2-3 minutes it goes to SBBOD.
Lates thing I did was push option+command+S when I turned it back on and now screen is black and has a bunch of code. Been at this stage for 30 minutes now. It is not pluged into the internet at the moment.
Info:
iMac, OS X but not sure what version.
View 8 Replies
View Related
Apr 13, 2012
i cannot get the latest update on my macbook pro, the software update is "Java OS X 2012-003".When i attempt, it says "The update could not be expanded, and may have been corrupted during downloading.The update will be downloaded and checked again the next time that Software Update runs".I do run Java, so i would really like this update.I did recently install a parallel program and installed Windows 7 64-bit, im not really sure if this matters but since the installations it's the first time i haven't been successful updating my software.Software updates are available for your computer.Do you want to install them? You can continue to use your computer during the installation.You don't need to restart it when the installation is complete. Note: Use of this software is subject to the original Software License Agreement(s) that accompanied the software being updated.A list of Apple SLAs may be found here: url....
Basically the Software Update removes the most common variants of the Flashback malware. This update also configures the Java web plug-in to disable the automatic execution of Java applets.Users may re-enable automatic execution of Java applets using the Java Preferences application. If the Java web plug-in detects that no applets have been run for an extended period of time it will again disable Java applets.This update is recommended for all Mac users with Java Installed. url...
Info:
MacBook
Pro, Mac OS X (10.7)
View 6 Replies
View Related
May 14, 2012
I have recently installed the latest updates for Lion and since then my Microsoft Office Home & Business 2011 no longer loads?I have tried reinstalling and still no joy.... What do I do as I need my files for work?
Info:
iMac, Mac OS X (10.6.8)
View 2 Replies
View Related
Jun 16, 2012
Software update fails on all applications individually and the same updates downloaded from theApple website won't mount.
Info:
Mac OS X (10.7.4)
View 14 Replies
View Related
Mar 10, 2012
Whether through the App Store or the Apple download page, it starts to download, gets a certain way through, and then just stops. In the App Store, after awhile I get a message that Software Update can't connect to the update server. On the Apple.com download page, it just stops downloading. I don't think it's our internet connection, because the update worked just fine for our other iMac (which is older than the one I'm having trouble with).
Info:iMac, Mac OS X (10.7.3)
View 1 Replies
View Related
May 16, 2012
I just updated my laptop to the 10.7.4 and now every 5 seconds there is this message in Console:
kernel: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff80119c8000
I also get a bunch of these logged:
kernel: IOSurface: buffer allocation size is zero
kernel: AppleThunderboltNHI::enablePower - turn power on, status = 0x0, result_value = 0x0
I have seen other people reporting this online, but haven't found any here on the board. How can I roll back to 10.7.3?
Info:
MacBook Pro, Mac OS X (10.7.3), 2.4 GHz Intel Core i5, RAM 8GB
View 4 Replies
View Related
Feb 26, 2012
My Mid 2011 iMac 27" i7 will no longer start after the latest EFI update. I decided to perform some system updated on my iMac and after installing 10.7.3, I rechecked and it found the EFI update and one other update. They were both pretty small (the largest was 3.6MB), so I decided to proceed prior to getting back to business with my system. After downloading the updates (took about 5 seconds), the machine proceeded to restart. There was a loud beep prior to the system restart chime after which it went to the grey-white apple startup screen with the spinning wheel. And it stayed there. After 35 minutes with no discernable progress, I decided something must be wrong. This system normally takes about 30 seconds to boot from a cold state (it's running on an OWC SSD) or maybe a minute after updates. So I held the power button to reboot. But it keeps going to the same state. I tried to reboot to a different internal drive holding the option key, but the same thing happens.
System Specs:
iMac 27" i7 3.4 Ghz (mid 2011) 12G Ram
Internal 1TB Apple HD
Internal OWC SSD 240G (main startup drive)
1. How do I recover from this?
2. Is anyone else running into this problem?
3. How long do the EFI updates normally take?
4. Shouldn't there be some sort of "progress bar" to indicate something is going on during this process? Or, if not, then perhaps a "WARNING!! This process will take up to two hours, during which you will receive no discernable feedback. Do not interrupt the process until more than 24 hours have passed with the spinning ball."
P.S. I think this is my last iMac EFI update. After my last iMac received an EFI update (2009 model 24" iMac), it became ultra-flakey and started corrupting HD's. It never worked the same after that. This machine was working PERFECTLY before the update.
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.3)
View 5 Replies
View Related
Apr 3, 2012
I just literally updated my macbook pro to the latest version of Lion, today 4/3/12 and now it's just stuck on the main log in page for lion. As in, I type in my password, it thinks for two seconds, goes black, and has the log in page again. It just loops. No end in site.I've rebooted in safe mode, run disk utitily, and repaired the disk... but no dice, still. It repairs the disk, fine right? When I reboot in regular mode, it just goes back to the password/login screen loop.
Info:
macbook pro, Mac OS X (10.5.8)
View 4 Replies
View Related
May 7, 2012
mail, admin safari all asking for my admin password to access the keychain. I repair and verified the keychain yesterday and all seemed okay, mail asked again this morning and safari was asking without even needing keychain access. Has this update trash their links to the keychain or could this be some kind or Trojan virus.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 8 Replies
View Related
Jun 30, 2012
Is Safari 5.1.7 the latest version for OS X Lion?
Info:
iMac, Mac OS X (10.7.2)
View 7 Replies
View Related
Mar 24, 2012
"Software Update can't connect to the Update Server" - so I can't even check to see if updates are available.This has been going on for sometime. For a while if I created a new admin account and used that it would work, but not today.Tried creating a new admin account but to no avail.
I clcik on the Apple Icon, (top left hand side of screen), click on SOFTWARE UPDATE, it runs for a split second, then: [URL]after which I check my internet connect to see that it's fine. (And I attempt to run SU with nothing else using the internet). [URL] I've checked the forum and found a few people with the same problem. I've tried deleting PLISTs and using 008.008.008.008 DNS address, [URL], but still cannot get it to work. I still have my old G4 Power running OS 10.5.8 connected to the same modem (Netcomm NB6PLus4w Modem which has 4 ports) as my Mac Mini, and it runs Software Update without any issues. So it's not my internet connection and it's not the Apple server, so it's something about the Mac Mini that's not right.
Mac-Mini 2.4 GHz Intel Core 2 Duo - OS 10.7.2 - 8GB 1067MHz DDR3 Memory.
Info:
Mac mini, Mac OS X (10.7), Netcomm NB6PLus4w Modem
View 8 Replies
View Related
Jul 29, 2010
Yesterday Apple released Safari 5.0.1 and Magic Trackpad and Multi-Touch Trackpad Update 1.0, but Software Update on my Mac makes me able to download only the first one (Safari 5.0.1) - which I did. Why can't it find the Multi-Touch Trackpad Update?
- My MacBook is fine (it's 13-inch, Mid 2009).
- My OS is fine (Mac OS X v10.6.4).
Sure, I can download it manually, BUT it makes me really annoyed if something on my Mac works not as good as it should.
View 10 Replies
View Related
Feb 14, 2009
I have problems since applying the latest security Update 2009-001 and Java 10.5 Update 3, I have 10.5.6 on the new unibody 2.4ghz and have completely lost the ability to connect to my wireless access point which is an apple airport extreme base station.
I can sometimes se the base station but cannot connect to it and sometimes cannot see it at all. I have three other apple computers at home all less then a year old running the same build of 10.5.6 but have not updated them and they all are fine.
This one was perfect untill I applied the update.
The machine I am having problems with is partitioned with windows 7 beta on it which has no problems connecting to the base station, which indicates that its not a hardware problem but more then likely the update which is causing the problem.
Is there a way to uninstall the last update or delete it? Any one with a similar problem or know how I can fix it, I have googled but cannot seem to find anyone with similar problems.
View 10 Replies
View Related
Jan 29, 2009
I've been using flock which gets the job done but safari has me scratching my head. I downloaded the latest copy. Several times just to make sure. It won't open. It gets as far as putting the icon in the dock then it crashes with the message: "The application Safari quit unexpectedly. Mac OS X and other applications are not affected. It'd be nice to use safari again and my software update says this when I run it. "A networking error has occurred: Error NSURLError Domain -1100 (-1100). Make sure you can connect to the Internet, then try again. Software Update can't check for updates because of a network problem."
View 5 Replies
View Related
May 16, 2012
When I read about the 10.7.4 update I went to software update and clicked on check for updates. I got a dialog saying:Failed to check for updates. There was a problem communicating with the web proxy server (HTTP).I went to the Apple site and downloaded the 10.7.4 combo update and installed it in the hopes that it would replace whatever had suddenly messed up the software update function; no luck.I have done cold restarts and repaired permissions but these steps haven't fixed the problem. All the other internet works as expected except that a widget, Maintidget, will no longer accept my system password or check for updates. Has something perhaps blocked a port used to check for updates that is different than that used by Mail and Firefox? I may have to do my updates manually until Mountain Lion in the hopes it will repair whatever has been corrupted.
View 2 Replies
View Related
Mar 23, 2012
I have an iMac 8-1 with OS is Mac OS X, version 10.7, 2.4 GHz Intel Core 2 Duo, and 3 GB 800 MHz DDR2 SDRAM memory.
When I try to update software I get this error message:
The file AppleMobileDeviceSupportDelta.pkg couldn't be found on the server url....Software Update cant connect to the update server. Make sure youre connected to the Internet, and then try again.I don't know how to "connect to the update server" but I guarantee that I AM connected to the internet!
Info:iMac (20-inch Early 2008), Mac OS X (10.7), 3 GB 800 MHz DDR2 SDRAM memory
View 1 Replies
View Related
Apr 13, 2012
The latest Java update has broken my junipe netwrok connect
Info:
iMac, Mac OS X (10.7.3)
View 10 Replies
View Related
Jan 20, 2009
I just downloaded the latest update to Parallels. I shut down Parallels before running the update, and I even did a reboot of the computer.And yet every time I run the update program it keeps telling me to "shut down these running and suspended virtual machines" and refers to "My Boot Camp"Like I said, I rebooted the computer first. There are no virtual machines running. Zero, zilch, nada. So why in the ******* is Parallels telling me that there is? "My Boot Camp" isn't even a VM that I use
View 1 Replies
View Related
Nov 14, 2010
I have a Macbook pro with PGP whole disk encryption and Snow Leopard and ran the latest OSX 10.6.5 update. During the reboot the mac would just hang at the gray screen indefinitely. I rebooted using the "cmd + S" key sequence and saw that the error where it was hanging stated "Still waiting for root device". Attempting to repair the hard drive using Disk utility off of the install CD failed, as well as attempts to rebuild the drive using Disk Warrior 4.2. I even went to a local Apple Store and the techs there didn't have a solution other than doing a re-install of OSX. At this point I was ready to cut my losses and erase the drive and do a fresh install. I'M GLAD I DIDN'T. I don't know why I didn't do this first but I went to PGP's website to download their recovery CD to try it and found an article that stated there was a known issue with PGP WDE and the latest 10.6.5 update. I followed the recovery procedures laid out here: [URL:...] and was able to boot up just fine.
View 5 Replies
View Related
