QuickTime :: Will Not Export Videos Imported By IPhoto?
Jun 12, 2012
I just updated to iPhoto '11 version 9.3 so I could import my AVCHD videos. Everything went fine on the iPhoto side. However, when I call up the captured clips in Quicktime, I can't export them. The export options are grayed out. The entire Share menu is grayed out. None of the movies show up in iMovie under the iPhoto Videos either. (Don't know if that's related.) This is a real problem because my camera shots 1080i and I have to deinterlace them. Doing so with Quicktime is the easiest way to both deinterlace them and get them into iTunes all in one step. Quicktime 10.1 (501.22)
I have several HD videos from my Sony NEX-3 camera that will not play very well from within iMovie. They freeze up, or run in slow motion while the sound track continues without any problem. I've seen other related comments on this forum, but no one has suggested a fix yet. I can play my clips just fine from the finder menu using "Quick Look". Other videos from the same camera work, what has changed?
Info: Quicktime, Mac OS X (10.5.8), Quicktime Version 7.7, iPhoto 7.1.5
I've recently upgraded to Lion and have found that Quicktime movies and embedded Flash movies won't work. With the embedded flash all I get is a black box, and with quicktime movies, such as the ones on the Apple website, I get nothing - the irony of not being able to watch movies on the Apple site with my Apple iMac gives me a little chuckle. Anyways ....... I've been reading thread after thread and trying lots of different things but nothing works. I've got this feeling inside that says it's something simple but just can't seem to find it.
I imported hundreds of master drawings into iPhoto but they appeared much darker and slightly discolored. Editing them with iPhoto is not very effective and not something I prefer to do because it is important that the images resemble the original art as closely as possible.
I noticed my Mac does various things automatically for me that usually enhance my experience, but is iPhoto enhancing my images for me? Is there a way to set a preference that iPhoto retain all the original features of the image?
I recently imported a full library of pictures into iPhoto.....most of them came across without any problems, but I have about 20 pictures that are green, i mean really green. I check the original file and opened it with lightroom and photoshop and the pictures load normal, I searched and found the iphoto copy and opened it with LR and PS and it opened normal. When I open iphoto and try to do anything with those pictures, they display green in other apps like when I drag and drop them on iweb. Does anyone else have this problem?. its happened on two different iMacs...same library and mostly the same pictures, I have a c2d mac and it did the same things but on that imac it was more like 150 pics that were green, on the new i7 imac its like 20.
How do I name the file name of my photos that I have imported. They always have a file name dsc (then a number), or p (then a number), depending on the camera I use. I want to name the files after the title of the folder but I just can't seem to figure it out. I'm a novice to mac and hope to love it soon.
Does anyone know if iPhoto can automatically create groups when, oh, say 13,000 photos have just been imported? I didn't use iPhoto 08. But I have 13000 photos, and I just imported them into iPhoto 09. Does anyone know if there's a way to batch split the photos into events based on the date taken?
I just noticed this new the other day when I import pictures from my canon a650 camera iphoto opens up as usual opens the pictures on the camera but all the pictures are fuzzy, like the are slightly pixelated. Once downloaded they look fine. I have checked every preference setting I could and cant figure it out? I am using Iphoto 08 7.1.5
Just imported a few images, and I don't know where they are located on the computer. I would like to know where they are so I can drag them into my photo folder.
Also, my phone camera supports geo-tagging. I have a bunch of pictures I took with geotagging on, and it works fine on the phone. On iPhotos though, only a very little portion of these pictures appear in the "Places" section. If I find a picture in iPhoto and hit the info button and hit location, it doesn't show up on the map, even though it works just fine on my phone (C905). Why doesn't it work properly?
I have a number of files with -rwxrwxrwx@ file permissions (note the @ at the end - this comes from an ls -l command in terminal). They are photos on an external drive. When I try to copy them to a new drive I am advised that I do not have permission to copy them (despite rwxrwxrwx).
This is confusing and also very hard to search for (@ not liked at all). Can anyone tell me what the deal is? I have a suspicion it may relate to the photos being imported iPhoto at some time but that I cannot confirm. I can copy them to a windows machine and then to the final destination but all the last modified dates get changed (not a desirable outcome).
I imported a photo into iPhoto. If I click on it, click actions and share to Photostream, I get a message saying it is already in Photostream. Yet, it does not show up in the iPhoto Photostream folder on my Mac. Nor does it show up in my iPhone Photostream folder. I believe I have iCloud set up properly on both devices and have configured iPhoto correctly. Is there something I can do to force a sync?
I try to quit iPhoto and the massage keep saying "Photos are being imported to the photo library" even there is no iPhone or iPad connected. The problem still remind for 3 days and cannot force quit or any option to close the program.
I have a CAF file that I want to export to MP3. I don't want to use iTunes to do this, since I figure that QuickTime should be able to do it for me quickly. There is no export to MP3 available, however. I looked around on the Web and saw some QuickTime components, but cannot seem to find a recent one that is a Universal binary.
Is it possible to export CAF to MP3 via QuickTime?
Trying to convert a .mov file to .wmv using either flip4mac or perian or any other plugin. In any configuration QT crashes no matter what conversion type I'm using. A little rectangular white window appears with only the orange dot visible and within seconds I get the beach ball running and have to Force Quit QT. Looked all over the internet to no avail - except lots of complaints regarding conversion in QT with no real solutions being offered. Emptied cash and trashed prefs file all to no avail. Is this a QT bug in 7.5.5 although I haven't heard anything on the Apple site?
When I upgraded to Snow Leopard I thought that Quicktime X was supposed to be better. -.- ...NOT the case! I usually obtain .mkv movies with DTS or AC3 audio which I can't play since I don't have a receiver right now.
But since I upgraded to Snow Leopard, Quicktime 7 has been shutting down as soon as I press Export? Which puts a huge dent in everything since that was the only way for me to go from 1080p .mkv w/DTS(AC3) to 1080p .mp4 with stereo.
I am using a Mac Book Pro with Snow Leopard in it. I used to have Export to FLV in my Quicktime earlier but i cant find it now after i upgraded to Snow Leopard. How can i find it ?How can i export FLV from MPEG Streamclip?
Trying to trim clips in Quicktime 10, they are quicktime movies and when I try to export it says it cannot the media may be damaged. How do you save a trimmed clip?
The subject line says it all. When I export files with Quicktime Pro, it sometimes creates a .xip file with the .mov file. The key word is 'sometimes'. I just exported 43 files with the exact same settings, and eight of them ended up with .xip files.
Info: MacBook Pro, Mac OS X (10.5.6), 2.5 GHz, 4 GB
I'm having trouble with the new quicktime pro. I'm trying to export a video with specific settings when exporting. It seems that in this version of quicktime you export and the only options i get is how to format : for ipad/pod/phone or 480p which is not what I want I need to change the settings to make my video 480x360 and fast start for web.
I have QT Pro 7.6.6 installed on a system running 10.6.8. When I try to export a file as a Quicktime movie, the setting button doesn't do anything. I doubt anyone will be able to reproduce this, but here are the steps: - Open a file with quicktime 7 - Go to File > Export... - Change the Export dropdown menu to Movie to QuickTime Movie - Click Options… - Under Video click Settings… That's it. When I click Settings in that last step, the button changes color to indicate that I've click it, but nothing happens. The other buttons (filter, size, settings) on that same dialog box work. As I said, I don't believe anyone will be able to reproduce this, but what I'd like to know is are there any pref files or other files that I can trash to see if it helps? I've already deleted my quicktime preferences, and that did nothing.
I have about 20 hours of low res digicam videos sitting in iphoto. When I launch Imovie, it loads all 20 hours without asking then proceeds to quit unexpectedly if I try to do anything. Is there a way to prevent iphoto from loading all of them without deleting the videos from my iPhoto library? I have about a 30 minute video I would like to edit I'm frustrated.How about removing all those clips except the ones I care about? Can I do that? (after waiting 20-30 minutes for them to load)
I'm using Keynote 09' to create a presentation which will be displayed on a windows machine so I planned on exporting to quicktime but there is no export menu when I press file. What's going on?
I would like to export the audio from a quicktime movie. i have QT 7 Pro. I want to listen to the audio from the movie in my car, on a CD. I tried it a few different ways, as AIFF, another, and it saves a large file but doesn't sound when I play it. No sound. Is there a way to save it so it's audible? These are AVI files.
I am trying to make a list of the videos that i have shot with my digital camera....my 1Tb is almost full, so you can understand that is not that easy as looking into a folder with the big thumbnails
this is the expectation: to find an app that can
-create a preview of each video (qt, mov, m4v, wmv, avi, rm, etc)
-create few frames that shows the content of the video
-export the list of movies as web page, with the title of the video and the snapshot for each of them
Do you know if there is any way to achieve this result, without making manually everything?
I've found a software on pc, taht i can use with parallels, but it takes just 1 shot of the video, and not multiple, with the result that is hard to get what is in the video, especially when the video is 10-15 min long, and the name doesn't help to recall what was happening in that video
I can't export a certain project to QuickTime in iMovie, but I can export it to other formats. The iMovie error message is: The movie could not be exported because an error occurred. (Error = -5000)
What's strange is that I was exporting this project to QuickTime yesterday, made some changes and tried to export again, and no luck? Yet it'll export to mv4 etc. I repaired permissions etc, and still no luck. I'm assuming it's related to permissions, but I have no idea where to start.
I've been using Compressor 4 for some time and have been converting .MOV files into >WMV files. When I selected an output source the Quicktime Export Components always showed up at the bottom of the list. I would select it and then be able to START BATCH. Now, it's no longer there. Instead, the word CUSTOM is there, instead, which I can't click on at all.
I've always had and used Flip4Mac and even upgraded but still the option to select Quicktime Export Components is missing entirely. I've rebooted the program and just can't get it back.
My MacBook Pro, Mac OS X (10.6.8) was going slow. I decided to reinstall OSX. All my data was backed up to my compatible external HD. I then erased my MacBook HD, and reinstalled OSX off the install disc and bundled applications disc. I went through the steps to set up the administrator account, and did all the other things in the instal process. I then did all necessary software updates. When all that was complete, I connected my external HS and opened migration assistant, and imported all the data from the latest backup. I now find that all my backed up data from before is under a different user account - named as in the old OSX set up. How do I populate my newly installed iTunes and iPhoto with the imported data stored under the 'old' username? Shouldn't this have happened automatically?
Info: MacBook Pro, Mac OS X (10.6.8), 2.66GHz Intel Core i7
