I remember hearing about it on a website, is there any rough tutorials to go about this? Don't ask me why I want to do it, my friend said it can't be done, and I just want to show him up. he also thinks macs are dumb, so hes not so smart in the brain.
View 10 RepliesI have a 1.33gh 14" ibook that Im selling so Im trying to reinstall leopard. so I put in the disk load it up everything is fine until it actually starts installing.. it gets about 10-20% and the says Install failed could not validate "Essentials" package. then I tried again and let it check the disc prior to installing and it tells me to clean disk from scatches and dust. i noticed there were a couple small scratches on the disk so i got another install disk but when i try to put it in, the ibook just spits it back out after a few seconds and i cannot load the installer with the new disk
View 4 Replies View RelatedI have an iBook G4 model number A1054 made in 2003 that I havent used ever since I bought a new laptop. I forgot my password years ago and I am not sure what has to be done first. I'm purchasing OSX panther complete installion discs because I want to update it and add more memory. If I buy the OSX software would I still need my password before being able to reinstall the new program?
View 2 Replies View RelatedI have a G3 iBook, 600MHz, 2 USB slots, 1 firewire slot, DVD ROM/CDRW with 640Mb. I bought a Tiger DVD which on the front says: "Mac OS X Tiger. Includes Xcode 2. Install DVD. Version 10.4.6." It came as new, inside a Mac OS X box (no grey installation discs - just 1 black DVD). But...it won't install on my iBook. In fact, it won't even mount on my desktop! I've tried holding "C" on startup but that won't help. Incidentally, I can't repair permissions (I just get "No valid packages (-9997)") but that seems to be the only thing going on with my Mac! Any ideas to get this show on the road?
View 4 Replies View Relatedcould some one tell me where I would find info on instaling a new screen maybe a website.
View 1 Replies View Relatedi attempted to install leopard with firewire through my mac mini, yet it get to the install menu and says: leopard cannot be installed on this machine. it is the two leopard discs that came with my mac mini intel c2d. I also have a powermac g3 i could run firewire out of if necessary. I dont know if it is the discs because i used the restore disc from a powermac g4 to upgrade this ibook to tiger.
View 1 Replies View RelatedI've got an old Ibook G4 with Panther and Ilife installed - I want to update to Tiger but keep Ilife - I have a retail copy of Tiger that doesn't include Ilife... What is the cleanest way for me to install Tiger and keep Ilife ?
View 4 Replies View RelatedI recently recived a iBook G3, Specs are 600Mhz, 635Mb Ram, 20Gb HDD. I go to install OS X Tiger and it either shows "You Have To Restart Your Computer......) or a System Failure: CPU=0 (Unaligned Stack) error. This is as it boots the CD for install. When it spits the error code in the background is the apple boot screen
View 1 Replies View RelatedMy RAM I ordered for my iBook 1.42ghz came in today. I'm trying to install it, but I can't seem to get the brackets to snap. I can get it in so it feels pretty secure, but only the bracket on the left side (when viewing from the USB-port side of the iBook) is clicking in place.
View 3 Replies View RelatedI have a IBook G4 labtop. how to install the memory chip.
View 7 Replies View Relatedso my boss' ibook g3 just broke, he brought it to apple and they said it needs a new hard drive and were going to charge him something like 400 dollars to replace it. He decided not to do it because it's so old. (not sure how old, but it's a white g3 with a cd tray). Anyway, i told him i should be able to do it. I've found directions online on ifixit and stuff but need a few more questions answered.
1. Will any 2.5 inch hard drive fit? I think i'm going for 5400 rpms because i don't want it to get too hot and he wants 80 gb. how is this one? [URL]
2. How will i run the os once it is installed? Do i need to installl 10.0 first and then move up? Can i install from the cd or do i need to do it from another computer via target disk mode?
3. ifixit suggests i get a "spudger" which i guess it a plastic anti static toothpic type thing to remove hard to get parts. Definitely needed or no? I have a set of small screw drivers that i've used for my powerbook that i thik should be fine.
4. Any tips at all you wanna throw at me.
I'm trying to install some kids games on our ibook g4 (1.067GHz, 256 MB Ram, 37GB HD running OS X 10.3.9). The game will let you start to install and then at the end it will stop and tell you errors are found. It makes you then start over. the kids games are dual pc/mac. min reqm't is OS X 10.3.2 or later.
View 4 Replies View RelatedI bought an ibook a little while ago because I wanted a small, simple notebook and I love my home iMac. I found one for a good price on eBay and when it arrived everything seemed ok. I wanted to re-install the OS and set everything to my specifications because I was having a little trouble with some of the apps. Anyway, I went through the lengthy re-install and just as it finished counting down the seconds to completion, it shut down. I thought it might be in sleep mode because the little white light was on, so I hit a key and the light went off but nothing happened. Nothing on the screen, no HD noise, nothing. I'm at a loss because I really don't know much at all about hardware or software, which is why I liked the user-friendly Mac so much. The only thing that tells me it's getting power is the little green light at the power connector. I tried a PMU reset (there's no reset button on my model so it was a button combo of shift-ctrl-option-power I think) but that didn't do anything.
View 3 Replies View RelatedI am pretty new to mac so a little unsure about the issue at hand. I bought an ibook without an OS installed. So I put in a setup CD but cant get it to load by holding C. This initially made me question the CD. But I then realised I wasn't able to eject it by holding fn and f12. Also the caps light wouldn't toggle on and off when I hit it, though I am unsure if this light works when there is no OS installed. My question is: is the keyboard not working?
View 5 Replies View Relatedi didnt have much to do a couple days ago so i thought i'd install Cheetah on my iBook G4, turned out to be harder than i thought. For some reason it doesnt boot any os prior to Tiger, so I installed Tiger and copied an image of the Tiger OS with the OS 9.2 (i think you have to have it on the system to install prior OS's). So i did that and when i pop the Cheetah cd in it loads and opens OS 9.2 but then it says: "This Application Does Not Run In The Classic Environment - To Install Mac OS X, start up your computer from the Mac OS X CD." Which i did but still doesnt load. I still have an old PowerBook G3 and installed Cheetah on it, then i removed its hd, and created a new sparse image from it. Then i booted up Tiger on the ibook g4 and restored from the image, all went fine, i selected the correct boot device and even repaired permissions but still it doesnt want to boot up Cheetah on the iBook!
View 10 Replies View RelatedI had the brilliant idea of trying a clean install of OS X on my circa 2002 iBook. I had Tiger on there, but the iBook was quite sluggish and I was getting frustrated with the performance of the iBook on the only thing that I wanted it to use it for: the internet. So I thought that if I wiped the hard drive and installed OS X again, I could benefit from erasing an accumulation of junk on the iBook. (One thing to note is that the hard drive is actually from a clamshell iBook. The hard drive stopped working a few years ago, and I spent a weekend replacing the drive)
The combo drive has long since stopped working on the iBook, so I hooked up the iBook to my MacBook via firewire and erased the hard drive. But like an idiot I installed 10.5 instead of 10.4 and now the iBook only returns the folder with the question mark. I have not had any luck (either before the ill advised OS X install or before) with doing a remote install. I have the original disks that came with the iBook (10.1), but when I try to install them using the MacBook's drive it just tells me that I can't install it on my MacBook, which is not what I want to do.
I have a G3 iBook and just the other day the display stopped working. There were no signs of the display going bad, it's just went. Am I able to boot the iBook via Target Disk Mode on my PowerBook and run the iBook Hardware Test CD on it? Also, can I reboot my PowerBook and choose the iBook as the startup volume?
I know how to do Target Disk Mode but the latter I'm not sure about.
My brother's iBook G4 (800Mhz, First Rev) has completely splattered itself and we're getting a new Macbook for him under insurance. My iBook G3 (White, 900Mhz G3..the last G3 Rev of the iBook) has a failing hard drive.
Now, could I swap out those two drives, at least to recover stuff? And is there a specific method of opening up the iBook G4 so that I don't break stuff (I've already messed with my G3..and ended up with a dozen extra screws ^_^
Mainly the aim is to salvage the hard drive and swap them out; replacing my faulty iBook G3 one with the iBook G4 one which is perfectly fine.
My iBook G4 power supply failed and I'm awaiting a replacement. In the mean time, can I use the power supply from my iBook G3 with the iBook G4?
View 1 Replies View RelatedRight now I have a G3 iBook (900 MHz, 640 MB RAM, Combodrive, 40 GB HDD). I'm looking at a G4 iBook (1.2 GHz, 768 MB RAM, Superdrive, 60 GB HDD).
How much faster would the G4 be over my G3. I figure that after selling my G3, the G4 would only be another $200ish on top of it. Would this be worth it?
I just bought a parts ibook from ebay, but I managed to fix it, except there was no hard drive. I currently have a 6 GB HD in it with OS X.3.9 on it, but I want tiger. I have the tiger family pack, so I have a license for it. It only has a CD-ROM drive, so I am wondering if I can buy a 40 GB HD, and clone the one from my G4 onto it.
SPECS
ibook G3- 500 MHZ
192 MB RAM
CD-ROM
currently has 6 GB HD
ibook G4- 1064 MHZ
1.25 GB RAM
Combo drive
40 GB HD
I have a clamshell iBook (not sure which model) with what appears to be a non-functional DVD drive. Is there any way I can install off of some other media? I'd like to zero it and re-install... its still a perfectly good web surfer.
View 6 Replies View RelatedI have original install discs for OS X 10.1 and 10.3 (Panther). There is one 10.1 disc and three Panther discs. The Panther CD labeled "Disc 1" says "Upgrade Disc" on it. Does that mean I have to have another version of OS X installed in order to use it? The 10.1 CD won't boot. I hold down option at boot, and it doesn't even show up. The Panther CD 1 gets me as far as the dreaded circle-slash. How on earth do I get OS X installed on this machine? I managed to get Linux installed on this machine without a hitch. Why is it so much harder to install a _native_ operating system?
View 10 Replies View RelatedSo, I'll spare you guys the details, haha, but I am stuck trying to decide between getting an iMac Intel or a MacBook Pro for my home use computer. What would be the advantages of one over the other? I just really love the fact that a MacBook Pro would be portable yet powerful. And yes, I have this iBook for portability to school and such, but if I want to do extensive work on the couch, I could bring a MBP vs. an iMac. What do you all think? Are too laptops redundant?
View 3 Replies View Relatedare these two LCDs swappable? Can I stick a G3 iBook Screen into a G4? I have no idea and I'd like to have some idea.
does the hinge and everything line up, too?
Will an iBook G3 keyboard ([URL]) work on an iBook G4?
View 3 Replies View RelatedCan it work? I found the part I need in my closet from an iBG3 and if it worked that'd just be great.
View 2 Replies View RelatedSo I have my Leopard DVD installer that I want to put on my iBook, but I can't, for many reasons.
1. My built in Combo Drive won't recognize the installer DVD, so I can't install that way.
2. The only drive I have that will recognize the DVD is a external USB DVDRW drive, and after lots of research, I am already well aware that you cannot boot a G4 (let alone any PPC) from USB.
So what can I do? Can I burn some sort of image to a CDR that will let me boot from my USB drive? I read about modifying firmware so a G5 will boot from USB, but I'm not sure if this will work. I mean, in a worse case scenario I can go out and buy a firewire cable and boot in Firewire Target Disk off a friend's Mac, but I'd like a simpler solution if possible.
Where can I find the download for Adobe Flash that will run on my iBook G3 with OS X 10.4.11? My brother gave me his old iBook after he bought a new laptop.
Info:
iBook, Mac OS X (10.4.11)
We have a macbook pro but I decided to resurrect my ancient g4 last week so that my kids could play videos and watch youtube. After doing some modifying with flash to get it to play on youtube it worked great. Then I installed 1mb of ram and all **** broke loose. After about 20 minutes everything, and I mean everything went dead. I installed the old 512 chip and reset the cpu and well, it started but things are wonky now. It's running much slower, won't run youtube videos smoothly ( wouldn't really call it playing as much as slideshowing) or play the games the kids had just played last week.
-933 powerpc g4
-640 ram
-ios 10.5.8
Info:
iBook G4 (14-inch), Mac OS X (10.5.8)
