My emac screen was working fine. then suddenly the screen image seemed to wiggle as if there was a power problem. I was able to shut off the emac properly using the shut down drop down menu before things could get worse.
But when I restart, the computer seems to turn on fine but the screen remains dark.
I'm creating a slideshow DVD on a new MacBook. I want to burn it to a DVD, but my MacBook doesn't burn DVDs. I have an Emac (10.2.8) that can burn DVDs. Is there a way I can hook up the MacBook and eMac to burn an IDVD project created on a MacBook. I can't just do the project on iDVD on my emac as it's an old version of IDVD that doesn't support the transitions I'm using.
View 1 Replies View RelatedOur eMac seems to be developing a green tint in the bottom right hand corner of its screen. I've done some quick searching online and it seems that a few people have suggested a cold boot so it runs the degaussing process on a startup.
I left the eMac off for about an hour, unplugged. It did the degauss once it was plugged back in and "seems" to have removed nearly all of the green tint.
There are a few threads on various forums when I search on Google about this issue but they have no conclusive reasons why this is happening.
Could my eMac be developing a fault at all? I'm not too sure if anything magnetic has been placed on our table near the eMac so this may be the reason.
i bought a mini vga to vga for my emac and am about to buy a monitor and i hear the ppcs can only mirror. so i know about the screen spanning doctor and think im going to use that, does anyone have the most current ones link as i cant find it and it works with leopard.
View 12 Replies View RelatedMy next computer purchase will probably be a MacBook (or MacBook Pro) but I obviously want to be able to plug it into a better screen when I'm at my desk. I was wondering if anyone knows if it would be possible to use my current eMac as this screen?
I have heard that in the early iMacs the monitor was connected internally with a normal monitor lead - so you could open it up and connect a longer one. Does anyone know if this would be the case with an eMac?
Or any other way I might be able to do this?
I have managed to scrounge a 2nd generation emac from college that has a faulty screen, the screen is totally unusable. i have seen the mod explaining how to remove the crt and put an lcd screen in there but to be honest i cant be botherd. all i want to do is run a standard lcd monitor externally from the mini dvi port (aquired cable from college also ) just wonderd if there was a way of disabling/ switching it off to save on power.
Also what version os would you reccomend running on this emac?
I have a 700 mhz emac and sometimes there is a pop and then immediately after the screen flashes and them everything is fine but it seems its happening more often.
View 2 Replies View RelatedWhen I press the power button on my eMac, it takes extra long on the gray screen with the Apple logo and the spinning gif, then takes about two minutes on the blue screen with just the spinning gif, then goes to a solid blue background, with a functional cursor, but no OSX. I've tried trying to eject the CD tray at all points in the startup process to put in the Mac OSX re-install discs, but it doesn't respond. What should I try before sending it in to an Apple store or Cupertino?
View 5 Replies View RelatedI am a high school teacher and in my lab, for the first time, I have an eMac (1 GHz G4), that, when I turn it on, all that shows is a grey screen with an apple in the middle. I tried doing a "mac-boot" to no avail.
View 1 Replies View RelatedContinues to run but screen is off. Will sometimes come back on after a few minutes. Works fine after unplugging and letting sit for a while.
View 3 Replies View RelatedI just installed "SwitchResX" (stupidly - IMPOSSIBLE to get rid of! ) and now two of the default eMac screen resolutions are missing in:
System Preferences >> Displays:
Please someone, tell me how to rid myself of this crappy software, and also how to get back my default resolutions in SysPrefs - I am losing my mind here!.
Greetings and saluations everyone. I've recently delved into the OSX world via secondhand eMac. The specs are eMac (2006 - not a typo... this is what it says)/1.42gHz/80GB HDD/1GB ram/etc. It came equipped with 10.4.6, did an update to the software and it brought the machine to 10.4.11.
After a week or so of tinkering, I think I have accidentally deleted some very necessary system files. Given that the computer did not come with any manuals or recovery discs, I've been doing some major digging over the last three days via internet and can not come up with a fix for my new love. I saw this post on MacRumors and it nearly is exactly what I'm experiencing: Mac chimes upon pressing of start button, goes to greyish screen with grey Apple logo and a spinning progress indicator then the computer goes silent (no HDD/CD activity)... yet keeps the active grey screen.
I've tried booting into safe mode but to no avail which leads me to think I've accidentally deleted some extremely necessary boot files. However, I do not remember emptying the trash during the last successful boot... is there a way from a command line prompt to "put the files back" to where they go?
I've downloaded several Mac OSX Leopard torrents but can't get them to boot off of USB drive, DVD RW external drive, external USB hard drive nor via OSX 9 CD ... Indeed, I am trying to burn from windows but have learned of several utilities which create ISOs in Mac Format and will decompress DMG files (ISOBuster & TransMac).
Please... will someone give me some good news? For example, telling me there is a way to boot from USB drive (and in what format the mac needs to boot - ISO? DMG? Expanded file system in appropriate directory folders? I don't care about wiping the hard drive... that's absolutely fine... I just need a working system again.
I need more ram for my eMac 1ghz. It has 512mb and its a little slow during some things. Like IMovie. What type of ram do I need?
View 3 Replies View RelatedI have a 1.25 ghz eMac with 1 512 stick currently in. What's the max amount of ram that I can put in? And, do I have to look for anything else except for "DDR SDRAM?" Do I need a certain PC number?
View 2 Replies View RelatedIm purchasing an eMac in a couple days, but am a little confused about performance. Its a 1 GHZ PowerPC G4 with 256MB of Ram but my last pc blew up (literaly) However the 1GB of RAM that was in still works and will fit in it.
Besides that my Questions pertain to Leopard and Time Machine. I Know that Leopard will run on this Mac, But what about performance? and I heard that the eMacs cant experience the i candy Time Machine offers.
How So? is it true? I really want the Ability to use Time Machine. (Right now i'm just using Genie Timeline for my Windows 7 PC)
So yeah I need 2 gigs of ram for my eMac 1.42ghz model. I found this but I don't know if there is anywhere to get it for less $.
http://eshop.macsales.com/item/Other...g/2700DDR1024/
I just got a USB 2.0 emac for nothing that was going to the recycler. The door specs are: 1.25 ghz/256/40GB/Combo "About this mac" shows that it has 512mb RAM installed in one slot, and it is running 10.4.11 Anyways, it seems to be working great so far. I was able to get one stick of 256mb supported RAM from the only other 1.25 ghz machine in the lot - the rest were 700 - 800mhz emacs. Is it OK to mix the 256 with the 512? I've read many places that it is fine, but will it actually boost the speed of apps and things, or should I just leave it as is? I read somewhere that it might slow down the speed between the two RAM capacities. I don't want to spend any money to buy more RAM.
View 5 Replies View RelatedI have an EMac g4-255mb(just got 2 (256mb chips) never put in yet)-60gig running 10.4 (just got it) and now just got iLife 06) and then I have an 80gig external hard drive. So its like 140gig of room. But I only have a cd burner and dvd drive. Would it be cheaper to install an new internal drive? Or pay more for the external(cause there is no hard installation). What drives would work? And I have a $200 dollar gift card to bestbuy or futureshop.
View 2 Replies View RelatedI have just got an excellent condition eMac 1.42GHz with the Radeon 9600 Card every transition is so smooth! Smoother than my MacBook!
Everything is standard, but it has an Airport Card in it as well which is cool
However, standard also means only 256MB of DDR3200 Memory.
Tiger is installed and everything updated.
Now I am planning to move this thing to Leopard alongside my MacBook. How much RAM shall I get for it? 512MB or 1GB? (bringing it to 768/1.25 respectively) Also what do I need to look out for brand-wise or type wise?
i have some questions regarding the Emac..
1.if i get the raster problem that its known for.. will the image display fine on an lcd with the mini vga cable?
2.is an emac with these specs worth $100 shipped..700mhz""512mb""40gig""keyboard""mouse""cd-rw""geforce2mx..
3.how much stronger in old games is the emac compared to an powermac g4 400mhz with a ati rage pro?? with 512mb of ram..
4.i think thats everything
I am wondering because of the click sound if it may actually be the hard-drive causing the pausing issues (as processor/loading noise on macs is generally silent). I have done all of the disk utility fixes etc. with no positive results; disk utility can not find any problems with the HD.
View 2 Replies View Relatedmy grandfather's dell laptop is horribly slow. I want to buy him a new computer thats runs faster for his emails/videos. I was looking at the old imacs/emacs on ebay (the 2000-2005) versions.
These comps fit in his budget of approx 100$. I was planning to buy an imac/emac with the following specs
500mhz (or faster) Processor (or 600/700mhz)
256mb (or more) Ram (512mb)
20gb Hard drive (adding external memory)
with the newer os x operating system.
My question will these computers fit his needs? He writes emails, he writes a ton of word documents, and he views videos off youtube and off a media player.
My question is that will these spec'd computers be able to run his needs efficiently?
Are there programs that are similar to the windows (which he is used to)?
Can you run microsoft office on these computers?
If not what would be the recommended specs I should look for?
I went online and baught the following memory that should be compatible with my eMAC:
512MB 64x64 non-ecc
PC133 133Mhz, 168 pin SDRAM
Unbuffered, Non ECC, Non Registered
7.5ns, 3.3v, CL 3 or CL 2
My 5yo eMac (1GHz G4 with 1GB of RAM) freezes intermittently. Sometimes the mouse & keyboard lock up, sometimes a semi-opaque grey 'curtain' covers the screen with a message window in the middle telling me to restart.
Sometimes it restarts okay, sometimes it freezes on the Apple/cog-wheel screen, sometimes the grey curtain comes down again, sometimes the desktop loads okay but then lines of code scroll down the left side of the screen and it locks up again. The RAM is third-party stuff but it's been working fine for over 12 months. The freezing occurs under 10.4 and 10.3.
Trying to get the ps3 eye to work with my emac. OS X 10.5.6. I have downloaded the latest macam and installed it, dragged the component over to the folder, and copied the component into the library/quicktime folder. When I open macam it recognizes that I have the ps3 eye hooked up, but the screen is black. Skype and yahoo also recognize the camera, but the cam monitor screen is black. I really want this to work, and have seen many posts from people with the emac/eye/macam combo and a lot of people have said it works.
View 2 Replies View RelatedI have an eMac 1GZ with 1GB Ram and G4 PPC will 10.6 work?
View 2 Replies View RelatedI'm new to the MAC OS, having migrated over from the PC side. I have an eMac running MAC OSX 10.5.8, with 2GB Ram. I'm having a couple of minor glitches that are driving me insane.
1. My computer always starts with EverNote running full screen. On the Dock, I have clicked the Open on Start up to remove the check mark, yet the next time I start up, there it is again. How do I permanently keep it from running at start up?
2. When I close EverNote, I then find a dialog box from ActionFX Log In that states that "To view this page, you must log in to this area on www.actionfx.com 80". I don't have a log in name or password to enetr. How can I stop this script from running?
3. Every time I start the eMac, the SuperDrive door opens and stays open. After the computer finishes, then I have to manually close the door (F12). Is this normal? Can I not open the tray automatically?
OK, was able to finally get Evernote not to run at startup. Just need to know about the SuperDrive door and the running script.
I know I could use the apple branded stuff so I don't have to use up usb ports but I'm not sure which airport card I need (I'm guessing the airport extreme) and I don't know where the bluetooth card is installed.
Its a 1.42ghz model.
I bought this refurbished computer, which has Mac OS X 10.5, Leopard PowerPC G4,1.42 GHz, Single Core,512 MB, and 80 GB hard drive. I'm told it can probably use an Airport Express card #A1026. Is this correct? And, I was also told I would have to plug in the antenna. Anything else to get? (I already have a Netgear Router #WGR614)
View 6 Replies View RelatedI found a great deal on an eMac for the rest of my family to use. Before getting started, I wanted to reinstall Leopard using a disk image. Obviously with an eMac, I am not able to boot and install using a USB flash drive so I used an old iPod with a firewire connection and put the disk image on the iPod. The problem I am having is when I hold down the "option" key on startup, the iPod drive does not show up. Am I doing something wrong? To my understanding, I thought I could use an old iPod to install OSX
View 13 Replies View Related