I have a 1.2GHz G4 iBook with the stock 256 MB of RAM (which was always too little, I know). What kind of performance boost can I expect if I max out the RAM to 1.5 GB or whatever the maximum is on this model? I'm running Tiger on it and most of my work is simple word processing and web surfing.
I have a G3 iBook and just the other day the display stopped working. There were no signs of the display going bad, it's just went. Am I able to boot the iBook via Target Disk Mode on my PowerBook and run the iBook Hardware Test CD on it? Also, can I reboot my PowerBook and choose the iBook as the startup volume?
I know how to do Target Disk Mode but the latter I'm not sure about.
My brother's iBook G4 (800Mhz, First Rev) has completely splattered itself and we're getting a new Macbook for him under insurance. My iBook G3 (White, 900Mhz G3..the last G3 Rev of the iBook) has a failing hard drive.
Now, could I swap out those two drives, at least to recover stuff? And is there a specific method of opening up the iBook G4 so that I don't break stuff (I've already messed with my G3..and ended up with a dozen extra screws ^_^
Mainly the aim is to salvage the hard drive and swap them out; replacing my faulty iBook G3 one with the iBook G4 one which is perfectly fine.
Right now I have a G3 iBook (900 MHz, 640 MB RAM, Combodrive, 40 GB HDD). I'm looking at a G4 iBook (1.2 GHz, 768 MB RAM, Superdrive, 60 GB HDD).
How much faster would the G4 be over my G3. I figure that after selling my G3, the G4 would only be another $200ish on top of it. Would this be worth it?
I just bought a parts ibook from ebay, but I managed to fix it, except there was no hard drive. I currently have a 6 GB HD in it with OS X.3.9 on it, but I want tiger. I have the tiger family pack, so I have a license for it. It only has a CD-ROM drive, so I am wondering if I can buy a 40 GB HD, and clone the one from my G4 onto it.
SPECS ibook G3- 500 MHZ 192 MB RAM CD-ROM currently has 6 GB HD ibook G4- 1064 MHZ 1.25 GB RAM Combo drive 40 GB HD
I just received a logic board replacement for my iMac G5. I noticed a difference in the "Processor Name" in the "About this Mac". My old logic board was labeled: CPU Type: PowerPC G5 (3.1) The new replacement logic board is labeled: Processor Name: PowerPC G5 (3.0) What's the difference between the 3.1 and the 3.0 CPU Type or Processor Name? Did they replace my logic board with an older version? I am in China where they can put anything in anything - you never know!
what is the difference between a retail install discs and a family pack?
i am deciding to buy an mac os x and i am a little confused..
copied from the description of the seller: this is the retail disk and can be installed on any computer that has the system requirements outlined below.
copied from the seller: This Family Pack allows usage on up to five Mac computers in one household.
that's the 2 OS's i'm confused about.. so, the first one is like an unlimited client? and i can install it on an unlimited number of computers? and the other is limited to only 5?
So, I'll spare you guys the details, haha, but I am stuck trying to decide between getting an iMac Intel or a MacBook Pro for my home use computer. What would be the advantages of one over the other? I just really love the fact that a MacBook Pro would be portable yet powerful. And yes, I have this iBook for portability to school and such, but if I want to do extensive work on the couch, I could bring a MBP vs. an iMac. What do you all think? Are too laptops redundant?
There are two 17" G4 powerbooks in the refurb section, and I was thinking of picking one up. What is the difference between the two? It says one has DDR333 SDRAM and the other is DDR2 PC2-4200 SDRAM. what is the difference? Which one to get? The only reason I would spend that on an older powerbook and not a new intel, is that all of my pro apps need to be used natively, and I don't plan to upgrade to CS3 anytime soon. I also use flash, final cut and shake, so new versions could get pricey! Plus rosetta doesn't support Final cut.
Just wondering what everyone's thoughts are on moving from an iMac G5 (2GHz) to an Intel Mac Mini (a Duo or Core 2 Duo, not the Solo) for Final Cut Studio editing? I don't do a ton of editing (it's a hobby), but I wouldn't want too much less than what I'm getting from my G5 right now.
It just came to my mind that at some storage place of mine, I have an old special edition (grey) iBook that i bought in 1999, if I remember correctly. Can't look it up right now, but I think it had one USB port, one ethernet port, a CD-ROM drive, and it was running OS9.
Is anyone of you still using old iBooks, and what for? Would a version (which?) of OS X run, or would you suggest staying with OS9? Kind of sad to have it just laying around - it was amazing, back in the days.
I am doing a presentation for a class thingy in technology about new media and i'm trying to express how when macintosh youtubers started uploading video blogs when they switched to intel/intel made iMacs and about this media blah blah blah. In the pic attached is that a iMac G5 or intel. I see spot light on the top right so it's either running tiger or leopard. I thought I saw a apple remote magnetic thingy on the side. Did the iMac g5 have one?
Just purchased a iBook G4 1.33 Ghz, 512 MB of Ram running Leopard. I must certainly plan on upgrading ram but I am wondering how bad will the deafault specs be with leopard?
I had my iBook G4 a few years ago, and since I was about eleven when I had it, I'm not sure I always took the best care of it, but it's always worked pretty much fine up until about a week ago. It's started shutting down randomly. It also sometimes randomly goes to sleep in the middle of things. In particular, it doesn't seem to like starting up, or the internet, especially if I'm on youtube. I've tried a PMU reset, as it worked once before when my laptop wouldn't start up, but it hasn't worked properly. It's worked from anywhere from a minute from the time I start up again, to about a day or two at most, but it always seems to shut down again.
I really don't know what else to do with it... and I don't understand how computers work at all.
Yesterday I was on facebook when my ibook g4 went black and turned off. There wasn't any beeping/flashing or anything but it won't turn on. When I press the little button on the battery 5 yellow lights light up so I guess the battery's fine but the laptop itself just died. If i can't get it fixed mum won't buy me a new one and i'll just have to deal with it.
I remember hearing about it on a website, is there any rough tutorials to go about this? Don't ask me why I want to do it, my friend said it can't be done, and I just want to show him up. he also thinks macs are dumb, so hes not so smart in the brain.
I have a iBook and would like to get a webcam to work with MSN Messenger for Mac 5.1.1. Unfortunately my budget does not stretch to an iSight. Can someone advise on a compatible webcam that would work with Tiger and MSN Messenger.
A couple of weeks ago, out of the blue, my Ibook 12" started turning off by itself.
At first it would turn on again, I was able to check the HD with the Disk Utility, which reported a fault in the HD. Then after a few times it wouldn't turn on anymore. I couldn't hear the chimes sound and the fan (or HD) would start running pretty fast.
I bought an indigo ibook clamshell 366 on ebay. Looks great but has no software. Can someone tell me best way to get OS 9.2.2 and/or OS 10 (.2 or .3) on this machine. Will any of the restore cds I see for sale work on this, or do I need other retail versions. I can put this on a network with my mac mini if that will help install.
My iBook G4 is dead (can't turn it on, get power, anything - RIP, iBook) and I've already ordered a new MacBook. However, a CD is stuck in the disk drive and I can't get it out...Any ideas on how to manually do this?
I was playing some old freeware games for Mac OS 9 and was playing lemmings when my Clamshell iBook just turned off and now I get the Blinking folder with question mark. I made a live CD of ubuntu where it's talking to the harddrive but the iBook won't boot to OS X so i am trying to figure why.
I've already RMA'd the first 1gb stick back to Crucial, and now I'm on the second. Sometimes the system boots, sometimes it hangs at a blank screen until I hold the power button down long enough to turn it off. But when I CAN actually get up and running, "About This Mac" reports that I only have the onboard 512mb. System Profiler says my singular expansion slot as empty! Yes, I've tried re-seating it-- many times. To no avail. I'm also positive the module is as far into the slot as it can go. And I find it hard to believe that Crucial would send me two faulty sticks in a row. Unfortunately, due to my built-in 512mb, I can't boot off the Crucial ram alone.