My Powermac G4 400mhz Sawtooth is not showing any video. The mac 'bongs' and you can hear that it is powered up however it will not display video. Last night it was displaying video fine however.
It did have a kernel panic but I think that was due to me plugging in a external hard drive. Any help would be greatly appreciated as was about to sell the mac as I bought it for fun and it is simply a money drain now!
I have a PowerMac G5 dual 1.8ghz running leopard. It worked flawlessly since the day I bought it.
Then as of last week whenever I booted the computer I would get the gray screen with a black box saying to reboot the computer (in 5 different languages). I would reboot the computer. Same screen.
Is there some way to check what is wrong? Is this typically a hardware issue or an operating system?
I was installing Tiger using FireWire from my Powermac G4 and it was nearly done when my Powerbook (target) died due to lack of battery... When the Powermac was rebooted, I get only a question mark and flashing smile.
I tried to test the C and T keys holding them down during boot up but only get the smiley face every single time... I even disconnected the secondary drive to no avail.
Please could you help me with this problem that i've got with my Powermac G5.
Spec is
Dual G5
2gb ram
I'm trying to boot from the Mac OS cd (tried 10.4 that it came with and 10.5) and both get to the grey screen with the Apple Logo and that's as far as it gets. No spinning loading wheel.
Tried the following..
PRAM reset
Swapping Ram out
Is there anything else i can do. It's a really good machine so i hope it's not needing a Logic Board repair!
Have searched MacRumours and am unable to find a solution to my problem, so here goes: I've recently bought a "faulty" PowerMac G4, which would not boot, however all the parts inside were sold as working.
When I try to boot the G4 the light on the front flashes and the fans begin to spin but there is no characteristic Apple "bong" and nothing appears on the screen.
I know the screen's working because I use the same one with one of my Windows PC's. I've tried pressing the CUDA button and reseating the PRAM battery but to no avail. Does anyone know what my next step should be?
We have a PowerMac G5 machine which won't boot at all. you can hear it turn on and everything (including the chime at bootup) but you won't see anything show up on the display.
Also after several minutes, you will hear a very loud noise come from the machine, the fan you can tell is extremely loud. Not knowing this stuff very well as i'm more a PC tech than Mac, what are some options to troubleshot?
I'm currently running an old powermac G3 that's fine with everything except video playback.
My question, is it the 300mhz processor, the video card (stock ATI rage), or a combination of both?
Before it's said, I would buy a new computer if I could afford it.
I have a G4 PowerMac 400Mhz running OS 10.4.8. The graphics seem a bit slow at times and I was wondering if upgrading the video card from the current ATI 16MB to a GeForce2 32MB would help? I have 1GB of memory so I know I am good there.
View 6 Replies View RelatedI recently purchased from a friend a Powermac G4. It was running Panther (i Think). Because it wasnt running all too well, I decided to give Leopard a go.
I had an extra copy of Leopard lying around, so I installed it. It booted up fine, and was working, until I restarted the computer. Now it doesn't boot up at all, and I get a grey screen with a folder with the mac symbol and a question mark on it. What have I done? And how to I fix it?
I have trouble with my PowerMac G5. It doesn't boot any more. Booting from CD is also not possible. Sometime it boots regularly from hard disc, but the system crashes down after a few seconds after the login.
Information:
PowerMac G5, MacBook Pro
Mac OS X (10.4.9)
I'm having some trouble booting my Powermac G3 beige desktop into OSX 10.2 - i know that it's officially supported, but its failing to boot the CD.
Symptoms:
Boot the mac up, press C, grey screen displays, (very) briefly displays a black screen with some white text and resets itself - Chimes, then sits doing nothing, no output to the monitor or anything.After this, i have to do the Ctrl+Opt+P+R before it will boot back up and repeat.
I have managed to get into the installer before, but install failed presumably due to the old hard drive being knackered (The original Quantum Fireball 4GB drive!!) No such joy since then really.
My Mac Pro crashed yesterday after it was reading an empty DVD, and now if boot the Mac it shows this screen:I have tryed rebooting it in safe mode, does not work, I get the same screen. Tryed to use a other monitor, same problem. Now, If I press the Eject button, the disc tray will eject and if I press the volume button it can be heard.
Info:
Mac Pro
any software that can play mkv video file without lagging in PPC powerbook/powermac?
View 3 Replies View RelatedThere is a Powermac G5 available in my area for $450. Its a dual core 2.3 and a nvidia GeForce 6600 and he is including a 20 inch ACD. I don't know if its a great deal, but I think it would be great, because I could build something wild in that case later.
View 6 Replies View RelatedI recently bought a PowerMac G4 1.42GHz Dual Processor. It has 2 gigs of RAM on it. It was a fair deal I think. The "thing" is still looking like new and shiny. Even the insides are still tidy and intact. My question is, would I still be able to pump more juice from this beast. It still run fast comparable to some decent windoze box. Up to how much processor can i be able to squeeze out the CPU and if possible, how to?
View 12 Replies View RelatedI have a G4 Power Mac. It's the "digital audio" model that has been upgraded with a 1.2Ghz G4 processor. It works well except for one thing. It shuts down randomly and suddenly. Then after 5 or 10 minutes it turns itself back on, reboots and runs fine. (It is set to re-boot after a power failure.)I suspect what is happing is the power supply is turnning itself off due to some kind of a thermal, self protection switch. The fan seems to work but the PS gets warm.What's the cure? Replace the power supply? If so where to get a new(er) one?
View 1 Replies View RelatedI have a G4 PowerMac that will not boot up. I power up the computer and it stalls on a grey screen with text prompting me to type <<boot>> if you wish to continue...or something like that. Does anyone have any advice on how I might troubleshoot this? The computer was working fine for a few days before this occured. It has been unused and sitting is storage for a while.
View 2 Replies View RelatedI just upgraded from a Powermac G3 (1st rev.) to a Powermac G4 DP 1.25 ghz... so much faster! Any other fans here? Any cool stories to tell about it?
View 17 Replies View RelatedCurrently it is almost entirely unresponsive. I came to wake it from sleep a few days ago and it refused to wake. It is totally unresponsive to the power button on the Apple Cinema display and when the power button on the front of the tower is used the button lights up blue and then goes out. There is no fan activity or other sign of life. There is no burned oder or evidence of anything charred.It is a dual 1.42 MDD FW800 machine with AGP graphics. Model: M8570So far I have:
-Removed and reseated the graphics card, RAM and other PCI cards.
-Removed battery and let it sit unplugged over night.
-Performed PMU reset. (once)
At this point I have come to believe the power supply needs to be replaced. it is model: 614-0224 (360w). After looking online they are stupidly expensive, from $180 to over $500 each. I will be ordering a new MB (PRAM?) battery (Saft 3.6v LS14250C) and replacing that as well.
Questions:
- Have I missed anything here? Is there any other explanation or method of troubleshooting I should try?
- Is there any cheaper source for the power supplies? Why are they so absurdly expensive? Does anyone here want to give me a sweetheart deal on one?
- Can anyone recommend a source for the LS14250C battery locally in Manhattan? Radioshack has it as an online only item and wants $15 for it.
What type of ram does the powermac g4 use? im looking into buying some and the about this mac just says sdram,but newegg has two different types of sdram. so what type does it use
View 2 Replies View RelatedI have always been in love with the power mac G5's.so, I am going to sell my G4 mac mini to buy one. I was wondering if I would be better off buying a single 1.8 and buying 2 gigs of ram. or, buying a dual 1.8 and only having the 1gb of ram?
View 18 Replies View RelatedI'm just curious, does anyone know where the ninth G5 powermac fan is?
Theres:
1 spinning storage
1 pci cards
4 processor and ram
2 on the front of the PSU
where's the ninth?
I have a PowerMac G4 (MDD 2003, I believe) that I use as my home media server for my Apple TV. Currently I have a 14+14GB boot RAID and 75+75GB storage RAID, using old PATA drives, of course. This is working great and is pretty well performing so far, but I'm going to run out of space eventually since I'm a packrat. I'm thinking that this Christmas will be a good time to renovate this machine, so here's the question MacRumors: What's the best SATA controller for my machine? PS: It's a dual 1.25GHz PowerMac 3,6. In MacTracker, this matches 3 different machines. Is there a way to find out which one this truly is?
View 3 Replies View RelatedMy PowerMac G5 fans hardly ever speed up. I mean they certainly never go full speed or ever close how they sometimes behave on start up. I never get the jet speed noise. Even when I am rendering a movie in FCP, I hardly hear the fans. Right now on idle, iStat pro reports CPU A being 58C and CPU B being 56C. Yet, the fans are still only 400RPM both CPUS Intake/Outake.
View 4 Replies View RelatedI have a strange problem with the powermac G5 1.8 SP, yes the one with the hardware bug. It was my first mac, what a dissapointment. The bug was partly solved with the firmware upgrade, but after that it still behaved strangely. The fans suddenly go up to maximum speed every hour, then quikcly return to normal. There still have been lockup's / beachballing with USB, and overall slow performance.Now I am running the latest mac osx Tiger version, about a few weeks ago, the fans start revving up almost to maximum, all the time, regardless of cpu load. The cpu temperature reads about 60...65 degrees centigrade when idling (minimum cpu load), cpu setting is already on "reduced speed". After switching-on, cpu temperature is already 60 degrees centigrade. The cpu heatsink is stonecold, as is the exhaust airflow. The cpu 2 fans roar like mad and keep revving up and down. When I remove the plastic transparent cover, the photocell is activated and a red LED comes on, now the fans immediately return to normal speed. Anybody else had similar problems wit the powermac G5 SP 1.8Ghz ?
View 12 Replies View RelatedI've got a PowerMac G5 dual-core 2GHz box. Can I add another dual core CPU to get a quad-CPU system?
Forgive me for not wanting to open the case and look for myself, but it lives in a little hole that is hard to get out of b/c of all the cables and stuff... just wondering if anyone knows off the top of their head if the motherboard has another slot...
Really wanted to update my Powermac this year to a MacPro but as I'm getting married it's going to be an expensive year so I've decided to upgrade the G5 2.0 DP I already have.At the moment the kit I have is pretty good in that I have 1.5 gig of memory and 250gig of hard drive space but I'm open to suggestions.The G5 I have is the PCI version so I'm a bit limited as to what I can upgrade but the main area I'm looking at is with the graphics card. I had BTO the ATI 9650 256meg card but I'm looking for something better. I've just started to get into "World Of Warcraft" and would like the best graphics card that is value for money.
View 5 Replies View RelatedI recently got enough money to by a referbished Powermac for my starting out edditing buisness. Right now we use a mac mini G4 with 512megs of ram(its bad) and a macbook ro with 2gb of ram and a 2.16GHz proccesore.(It runs really fast) Anyway i want a stationary desktop to do my edditing on and i dont want to buy a mac pro because of price and i really dont like the type of ram it uses. So here are my thoughts for an editting ccomputer and i would like your help in making my desition.(Oh and if it matters i will be edditing HD Films on it)
Power mac Dual Proccesor G5 at 2.5Ghz
2.5gb of ram
250Gb HD
ATI 9650 vid card
Price is about $1900
Powermac Dual core G5 2.3GHz
2Gb of Ram
250Gb HD
Nvidia 6600le
Price is about $2000
eather one is fine for me i just want somthing that will outperform my macbook pro and allow me to retire my mac mini. Oh and des ram really make a huge differance in final cut pro from 2gb to 4gb.
Why were some Powermac G4's names have Quicksilver in them? Is it a special line or what? Whats the diffrence between the G4 "Quicksilver" and the regular g4?
View 10 Replies View RelatedFYI I have a powermac G4 dual proccessor with mirror drive doors. im running mac os x 10.4. I am wondering if anyone has installed linux on a similar machine, I would like to know more before I try it. what version is best (ubuntu I heard is good?)? Must you reformat a drive or can you install in on a new internal drive? any information really.
View 24 Replies View Related