It just sais /ect/master. Password and won't give me my regular screen,My garage band was giving me the hour glass, so I rebooted with command option p and r And now I have a black screen and the text above, how do I get back to my disk apps ect...
Info:
Mac OS X (10.5.8), G5 tower duel core
my mac power g4 model 8493 will not power up/ turn on
Info:
PowerMac
I have tried two different brands of blank CDR in my drive and both times, they fail to mount and in Disk Utility, show up as Sony DVDs (neither of them is a Sony or a DVD), but not writable. I have no problem with media that already has content. I've tried resetting PRAM, but nothing else yet.
Information:
Powermac G5
Mac OS X (10.4.10)
On my old iMac with OS X 10.4.11 I forgot my admin password. I have the installation DVD, but it doesn't work like the Mac Support instructions seem to indicate. When I install the Mac OSX 10.4 DVD and choose utilities to change password, the only change password option is for the DVD itself...no icon for the associated iMac hard drive. I believe I'd be changing/using a root password rather than the Account Admin Password that I need to change. How can I get out of this situation and identify a replacement for the forgotten admin password on my Admin Account?
Info:
iMac, Mac OS X (10.4.11)
I have a PowerMac G5 OSX 10.5. I bought it used without install disks. My password doesn't work for some reason.
I've checked with the seller to confirm the password and I'm sure of caps and spelling.Â
Can I reset the passworde without an install DVD?Â
Info:
PowerMac, Mac OS X (10.5), G5
Often when I put my iMac to sleep in the evening I find the system unresponsive when I come to use it the next day. I can see instantly that the system has an issue because I see that the screen backlight is on. The system does not react to any mouse or keyboard input and requires a power off reset to restart.Â
I thought that the issue may involve Parallels which is often running when I have this issue , however, I have spoken with Parallels support who recommended removing parallels, repairing the disk permissions and reinstalling Parallels which appears to have had no effect.Â
The iMac is very new and was purchased in November 2014 and is configured with a 3.5GHz i7 processor, 16GB or RAM 3TB HD and NVIDEA 980 graphics card.Â
Info:
iMac (27-inch, Late 2013), OS X Yosemite (10.10.1)
I have this iMac for slightly over two years and when I forst got it I thought it would be a good idea to have it start up a 6:55am each weeday. After about a week I changed my mind and went back into Power Saver and turned off the settings. Since then, I can't tget the machine to quit auto-starting at 6:55, 7:55 and even sometime 8:55. I have called Apple, taken it in to an Apple store, they even claim to have replaced the computer
View 1 Replies View RelatedI installed Leopard about 3 weeks ago and have been very pleased with it; however, since then every so often and when booting up my G5, it shuts off again. I boot again and a small window appears asking me to reset the date and time. Each time this happens I am able to reset the time and date correctly in System Preferences. The computer is about 3 years old so it may be the internal battery and nothing to do with Leopard. Or, could it be a bug in Leopard?
Information:
Dual 2.3 GHz PowerPC G5
Mac OS X (10.5.1)
3.5 GB DDR SDRAM Apple 20 inch. Display
I have a DP 2.7 G5 Tower and lately I come into my office to find it with dark screens (dual monitor setup), and I am unable to in any way control it by the mouse or keyboard. I imagine it's "hung?" The fans are on full blast and it sounds like it's planning to take off at any moment. I've awakened in the middle of the night by the sound of it and it's in that same state. What to do? I restart it at the power button. I then have to run Disk Utility to verify all the disks and RAID setups.
Anyway, I read about the coolant leaks issues. I started running a temperature monitoring program for the past few months, and its been doing about the same type of pattern since I started monitoring it. Doesn't appear to be unusual. Everything appears to be working fairly well, except for this issue. System is OS X.4.11, and checks out fine with Disk Utility. So far the hard reboots haven't done any damage to my disks, but it worries me greatly. Also the "liquid cooled" aspect worries me greatly.
Information:
Multiple Macs iMac G5 & PowerMac G5
Mac OS X (10.4.10)
Liquid Cooled
I have a power mac G5 and after I updated to the highest software update available, I find that iTunes and Safari reset their data everytime I close them. I have checked all settings and tried resetting to regular software and trying again.
Info:
Mac Pro, Mac OS X (10.5.8)
I have a G5 Quad with an Ati x1900 graphics card running into a 52" Samsung LCD. This was working fine through a dvi-vga adaptor until I switched the monitor resolution from 1920X1080 to 1360X768 which is not supported by the monitor .....blank screen. I plugged another 19" monitor into the other output on the card and both work fine but as soon as I remove the 19" the 52" reverts back to the unsupported mode. I have reset the pram and tried booting in safe mode but that did not help me. From bootup the 52" works fine until just before the login screen, then it switches resolution......blank screen. Would anyone know where these settings would be housed in OS 10.5.1 so I can modify (delete) them?
Information:
G5 Quad
Mac OS X (10.5.1)
It has been a while i havnt used my MacBook Air. I forgot my passwords to enter.How do I completely reset my computer so that passwords are disabled or just reset?
Info:
MacBook Air, Mac OS X (10.7.4), TalkTalk; Huawei Echolife HG532
My girlfriend has a 12 inch Powerbook G4. She noticed that the battery life was starting to dwindle. Tonight, she tried using it. It wouldn't power up. The battery indicator showed one flickering power circle. The adaptor has the green circle on it, indicating the battery has a full charge. However, the computer won't charge up.I've read the 12 inchers don't have separate PMUs. Could that prevent the machine from starting? She was using it earlier this evening, as she e-mailed me pictures from our vacation.
View 10 Replies View RelatedI have a iBook G4 laptop and there seems to be something very wrong with it. It started a few days ago just randomly. I was reading something on the internet and the screen went black on me, but the power was still on (I clicked CAPS LOCK to see if there was power). I then proceeded to push the power button and the power went off. When I pressed the power button again to turn it on, it made that internal noise it always makes and then the fan came on, and wouldn't turn off. There was no picture on the screen at all. Completely dead. But there was power, because when I clicked on the CAPS LOCK, the light came on). I tried pressing on the power button for at least 15 seconds and even went as long as a minute, and the power didn't go off.
View 3 Replies View RelatedI had a bad power surge (USB hub that was plugged into the back of the display had the wrong power cord plugged in... very stupid mistake I know!!) take out my 23" Cinema Display. The display shows no sign of life (no power light, etc) and the brick has been tested and is OK. My local service place says that they will have to send the display back to Apple which means a minimum of $400 for repair so I'm wondering if anyone has had a similar issue that they resolved successfully? The service place suggested that Apple would replace the logic board but is there any way to test to see if this is the main issue? I have seen logic boards sold separately online but would be hesitant to buy it without know that this would fix this issue.
View 10 Replies View RelatedI made this a new topic because I think it is important enough to do so. Probably most of those that originally complained about this have moved on to the new MacPro but I am sure there are still enough G5 owners out there that still have concerns about this topic.
A clean install of Leopard eliminates the infamous power supply beeping
Its amazing, my G5 is like a new machine; no more of the annoying power supply beep; although, I learned to live with it after a while and didn't even notice it. However, the silence is now very noticeable.
Where can I obtain a new 23 Inch Cinema Display power adapter? I've searched the Apple Store but I cannot find it.
Information:
G5 Dual Core PowerPC
Mac OS X (10.5.1)
23 Inch Cinema Display
I have found that by plugging in my Apogee Duet firewire audio interface and ONLY WHEN AppleFWAudio was loaded there was a 10c CPU raise that was making my MBP (late 2008) hot!I wanted to monitor the power that was required for Duet to run and to see if the temperature rise was due to that, so:With Apogee drivers uninstalled (just to be sure its not their drivers related, which is notMBP on battery power with System Profiler opened (to monitor the mA required by the computer from System Profiler -> Power)
View 5 Replies View Relateda friend recently gave me a g5 power mac that had some issues, and the failure was described as intermittant. The machine supposedly would work properly when booted and start freezing up after time, but if turned on the next day it would work properly for some time. I assumed it was an overheating issue, but apperently there is more to the picture. I have tried booting the machine quite a few times and the display always reads no signal. The machine sounds as if it were booting normally, but there is not output. At first I assumed it was my display cable, which was a DVI-D single link, however the DVI-D dual link cable leads to the same result. Is it nessicary to have a DVI-I cable? None of the error LEDs light up on the motherboard. After doing some hunting I haven't found anyone with the same issue, but I am wondering if I should assume the graphics card is dead. What steps do I need to take to isolate a graphics card failure in a power mac g5?
View 3 Replies View RelatedI hav" a "late 2004" G5 2.0 dual processor. To upgrade graphics card, I find many require a power supply splitter. Do I have a molex 4-pin connector? I can't see the location inside the box.
Information:
G5 dual 2.0, 2.5Gb
Mac OS X (10.4.3)
I have the problem that I need to frequently power cycle (shut off and on) my dsl modem to maintain a reasonable speed with my internet connection. It is making the internet experience pretty user unfriendly. Does any one know whether there is a way to optimize my internet connection such that this is not required so frequently (couple times a day)? I am on my second dsl modem, and the same problem has occurred with each of them. ATT simply advises me that my solution is to power cycle the modem to sync the system, whatever that means.
Information:
Power Mac Dual 2.0 GHz
Mac OS X (10.5.1)
ATT DSL Internet Connection
I added 2 sticks of 512 to my power mac g5 1.6. I had ahard time getting the computer to see the new ram, but finally was able to kinda get it working after zapping the pram. However my computer only saw these 2 sticks as 256, odd. So i attempted to troubleshoot the problem. I tried just installing the new ram, but the computer wouldnt boot. I tried a few different combos with the other 4 sticks i had, but nothing. I put the old memory back in, and still nothing. The power led looks to blink once every five seconds or so. I tried pressing the pmu reset button, but still the same out come. I also tried taking out the battery, nothing.
Information:
1.6 g5 single proc
Mac OS X (10.5.1)
I had a weird issue this morning. I started computer and it did not make the chime sound, it didn't do anything at all. I disconnected it from the extension cord as well as all the peripherals attached to it and nothing. I tried a different start up disk and again there wasn't a sound. Then i unplugged it and reset the SMU on the mother board and air sprayed the computer to remove all dust. Then plugged it back and it came back on.
Information:
Power Mac G5 Dual 1.8
Mac OS X (10.4.11)
I'm using a B&W Power Mac G3 with 512MB RAM and OS X Tiger for a SMB file server (with 5 users) and a USB printer server. Everything is working good, but I have a problem.
It doesn't have a monitor or keyboard/mouse attached normally (I can configure it via VNC). The problem is that I would like to be able to turn the machine off when it's not needed (like at night sometimes, days when I won't be home, etc.). I would like to just hit the power button and have it turn off, however it puts it to sleep instead.
Normally, sleep would be fine, except on the B&W, the fans still run, just the HDs shut off, so it's still noisy as heck.
Is there a way to make the power button shut it off? If not, any other easy methods of shutting it off you can think of? Via VNC won't cut it, as my dad needs to be able to turn it on (not a problem) or off as well.
i just got my new imac 2 days ago. I was wondering is there another to turn on the power without pressing the power from button? (cuz i remember u can power on from the keyboard b4)
View 7 Replies View RelatedAnyone know where I can buy an extra AC cable for the MagSafe 85W power supply that came with my late 08 MBP? I'd like an extra cable and I'm not interested in ponying up the dough for the entire power supply. I checked the Apple Store and Macmall, but haven't found anything as of yet.
View 3 Replies View RelatedLast Thursday I down loaded software updates from apple and have been losing power very quickly ever since. It just seems like as soon as I remove the power cord I lose power with in three minutes.
Info:
MacBook, iOS 5.0.1, purchased feb 2009
tried 2 boot up my G4, nothing, replaced internal battery, no status change, advice? would still like to be able to use it if possible and affordable
Info:
G4 dual os boot, Mac OS X (10.4.11), will also boot up in OS 9.2.2 when
I have an old power mac and want to get it online if possible .Does anyone know if ots possible to install an airport card into it and get online that way ?
Info:
PowerMac, Mac OS X (10.4.11)
I've been suffering of slow speed on my macbook pro, and this happens when I unplug it from power and just let the battery works itself, then the % CPU usage increases dramatically to 330%Â and the laptop becomes very very slow, what should I do? Because if my macbook is off-power, it doesn't work properly, so what is the point to own a portable computer?
Info:
MacBookPro, Mac OS X (10.7.4)
