Does ANY company make a stand-alone external enclosure for a Quantum Viking II 9.1 GB PHXWS hard drive from an old G3 Tower?
Info:
PowerMac, Mac OS 9.2.x
I have been searching through the internet looking for a comprehensive list of sorts, but to no avail. Having perused through the various set up threads in the picture gallery, I noticed that many members have external hard drive enclosures that markedly resemble the mac pro desktop. I was interested in purchasing one for myself, but didn't know of very many. Thus far, these are the ones I've got:
Mac Power Pleaides
Macally
Rosewil
I am sure there are many more, especially manufacturers of multi-HD enclosures. I was hoping to get your input to get some ideas of other manufacturers to consider.
Is possible to just swap the 500g hard drive into the G5 Power Tower instead of cloning the hard drive - Both PPC ?
View 4 Replies View RelatedSo there's an enclosure that has oxford 934dsp and it has two fw 800 ports on it. I also have an OWC Voyager that has the same chipset and it doesn't pass thru any bus power and this is something that has to be powered by an ac adapter. OWC support told me that this is because of the 934dsp chipset and I'm skeptical of this claim. I suspect that there are enclosures out there than can pass thru bus power over firewire 800 regardless of chipset used.
View 5 Replies View RelatedI have a mid-2010 macbook pro 13". The other day, it crashed on wake-up, and would not boot. I had a OCZ Vertex SSD boot drive, and the OEM hard drive in an optibay enclosure (replaces the optical drive and used only for data). I used this setup for one year with no problems. After much troubleshooting, I found that I could see the SSD drive by booting into a recovery partition that I have on a USB stick, and putting the SSD in a USB enclosure. Then disk utility could see it, but not mount it. The label on the boot partition was "lion", but it changed to "disk1s2". I was able to repair the drive using disk utility, and then boot from it using the USB enclosure.Once booted, I could still see the OEM hard drive with no problems. So I powered down and put the SSD back inside the case and rebooted. It booted in safe mode, but it booted fine. The next time I rebooted, it would not boot. I swapped the OEM drive and the SSD drive, and then the sytem booted with no problems and I was able to use both drives.
One day later, I noticed my OEM drive was no longer mounted in OSX. I took it out, put it in a USB enclosure, and OSX could see it fine. There were no errors on the disk. I put it back in the macbook and reboot but OSX couldn't see it.So, the primary SATA port seems to be working intermittently. Three times now, a drive has stopped working on this port. Each time, I could use the drive in an external enclosure (or using the other SATA port normally used for the optical drive. Does anyone have any ideas? Could it just be the cable?I'm trying to make this computer last at least another month or so because I need to upgrade to a larger model, and am holding out for the 2012 release.
Info:
Macbook Pro 13", Mac OS X (10.6.5)
So I am well on the way towards my 27" iMac. I have just finished transferring my files, work, backups and media from ext4 hard disks to hfs+ (via a combo of an OSX VM for disk util, and removing journaling/file-copying/re-enabling Journaling under ubuntu and the VM.
This has me left with 1.5TB and 2TB HFS+ disks and my old dual bay USB enclosure (an Icy Box). I now need to start looking for a good FW enclosure/s to home these two drives. I have had a look about and the Icy Dock dual bay (supporting raid and also JBOD - important for this) looks like a winner (waiting on techies to answer me about putting drives with data on them in the enclosure in JBOD as I dont want to lose data).
Are there any other options (most of the posts relate to single drive and/or supplied with disk enclosures). I really want something that is FW800 and lets me drop two disks in and just use them.
I may put up a wanted to see if someone has unused enclosures for sale (perhaps where they have removed the disks and put them in their shiny Mac Pro?)
Is it possible to install 4 SATA drives into a G5 tower? I didn't open it up yet cause I have to move so much material to get to it. I'm assuming you can purchased a SATA PCI card but is there room in the case for 2 additional drives?
Information:
PowerMac G5
Have a Power Mac G4 MDD - Apple genius bar looked at it and told me probably need a new power supply (shutting down at will and having trouble powering up but before that the computer was running well) and I'm not sure if I should get a used or new one on ebay or if you have a better idea. Can't afford a whole new system so want to resurrect this one.
View 3 Replies View RelatedWhat is needed to set up an older power pc G4 tower for wireless. I also have a wireless ready 24" I-Mac. Would a 300 Mac USB wireless adapter help?
View 1 Replies View RelatedTransfer information from one hard drive to another hard drive
Info:
PowerMac, Mac OS X (10.5.8), G5 dual 2.0 processors
I need to back up hard drive to an external hard drive. How can I do this automactically?
Powermac g5
10.4.11
tiger
Info:
Mac OS X (10.4.11)
I bought leopard family pack to update the operating system on my intel macbook and g4 733 tower, the problem being that my tower does not have a dvd drive. Is there anyway to use the macbook as an external dvd drive to install leopard which is currently running 10.3.9?
View 2 Replies View RelatedI updated my G3 today to 10.3 finally and everything was working great until I updated software to 10.3.9 now my wireless isn't detecting any signals while it was working before the update. I'm thinking a driver was broken any ideas. It's a linksys wireless adapter I do believe.
View 1 Replies View RelatedI have Mac Pro tower quad cord. My 250G drive was full so i got a WD Caviar Black 500g drive. Then used image to copy to an external drive then I restored to the 500G drive then replaced the 250g drive with the 500G. When I boot up I get the folder with question mark.
View 4 Replies View RelatedI have a Mac Pro (Intel) and have 2 empty hard drive slots. I have an external 2TB hard drive that I would like to take out of it's case and install into the tower. Can I do this without ruining the external drives? Here is my concern: I own an ACOMDATA 2TB drive, Model DHD2000UFAB-72. It is actually 2 hard drives inside. Is there something in the external case that or motherboard inside the external case that helps them run together as one? If I put each one inside a separate slot in my tower will it work?
View 16 Replies View RelatedMy original "home" hard drive in my G5 died and I'm in the process of attempting to replace it, and I figured I would install Leopard as long as I was at it.I purchased a 500GB Maxtor MaXLine Pro Enterprise 7200RPM 16MB Cache SATA I/II 3.0G hard drive and installed it, no problem. However, when attempting to install Leopard, the installation DVD doesn't see it as a volume.I'm thinking I have to initialize my new hard drive first, but since I have no other internal drive available (the old one is dead), I can't launch Disk Utility to do this.I have Tech Tools Pro, but it doesn't appear to come with a tool to initialize a drive.
I tried booting up using the AppleCare CD to see if that had a tool on it, but the computer wouldn't boot up with it (although it did boot up with Tech Tools Pro).Is there another tool I need to be able to boot up from the CD-ROM and perform an initialization on my new hard drive?
Information:
G5
Other OS
Leopard
I got a powermac G5 Quadcore with 1 internal harddrive. I wanted to replace the drive + add a second drive and then install Leopard on two ultra fast drives preferable in raid0 if possible.
But when I add the second drive Disk Util can't find the drive. I tried swaping the drives and it's always the hd sitting in the bottom tray that can't be found and not a specific harddrive. Therefore I'm thinking it's the motherboard / power supply, sata power cable or sata data cable. I tried to swap the sata data cable did not help anything. I tried just having 1 hd in the computer in the bottom slot still not possible to find the drive, therefore I'm thinking it's not a powersupply problem but I might be wrong.
Anything I could have forgot to check or do with the new drives to make it visiable?
I tried to install Leopard on the drive I could se (after trying for a day to find both hd's from the installer disk util to make the raid) - but it did not help anything in Leopard I still can't se the second drive.
Sata = no jumpers right?
Could filesystem on the new drives have anything to say?
Anything else?
I'm affraid it looks like I need to have the computer to service to have it fixed for something that never worked appraently and I don't have warrenty anymore
I've have an extra internal 500GB in my G5 and I would like to mirror it to my external 500GB HD (FW400) and repeat this process once a week. Don't want backups just want to mirror. Is it possible? If so what software should I use?
Information:
Powermac 2xG5
MacBook 2.0
MacbookPro
Mac OS X (10.5)
Airport Extreme
About 2 years ago, I added a hard drive in the second hard drive compartment. I would like to replace it with a recently purchased 1 TB SATA hard drive that is desperately needed, but the hard drive in the second compartment will NOT budge whatsoever. I've tried wiggling the hard drive side to side for hours, bloody scratched up hands, screwdriver method Apple suggests, chop sticks that another reader suggested, even a string with a knot to no avail. I don't have rubber clamps as one reader suggested. Does anyone else have any other suggestions besides going to a store and paying them to remove it?
Information:
Powermac G5 2G, G4 1.2, Powerbook G3, 500
Mac OS X (10.4.11)
Have successfully installed a Seagate Barracuda 160GB internal HD (2nd HD) and it's icon is mounted on the desktop. I used Disc Utility to format the drive (Mac OS Extended-Journal), but was unable to install Tiger because of a faulty install DVD (I think). I tried the Panther install DVD's that came with the G5, but am unable to open the the first DVD of that set either (get the grey screen with no wheel, with strange color lines).
More importantly, the drive somehow has a complete duplicate of my other drive. Everything! Also, it updates with things that that I download or add to my Panther drive. How is this, if I did an erase and format using Utility? I'd like to use this 2nd HD as a backup HD (if I can ever get an install DVD to open). Why doesn't the 2nd HD show in the Start up Disc Window? How do I successfully erase it and format this 2nd HD? How would I run a different OS on this 2nd HD?
Information:
G5 dual 2.0GHz
Mac OS X (10.3.x)
Powerbook G4 1.5 - OS 10.4
I am still just a little confused about installing OS X onto the second (new) hard drive.
Questions:
1. Is it necessary to install an operating system? What are the advantages of doing so? Can I use it without installing?
2. If I do install, do I have to buy another version of OS X or can I use the same one I installed on my first hard drive?
Information:
PowerMac G5 dual 2.0
Mac OS X (10.4.11)
I have royally screwed up! I want to erase the hard drive on my Power Mac G4 to prepare it to go to my son. I thought I was doing it right, but had forgotten to put the energy saver on "never turn off" so the screen dims when I try to continue with the erasing. Tried to start over with an install disk in the tray. Now can't access the original disk.
View 14 Replies View RelatedI am a photographer. I use 4 X 1TB LaCie external hard drives to store my digital images. 2 as masters for different business segments and 2 as their back-ups. They are daisy-chained using Firewire 800. Recently my G5 has stopped recognizing one of the drives. Is there any way to get my machine to re-recognize the missing drive? I have rewired the four drives to see if there was a problem with the cabling, but this does not appear to be the case. I am coming up to the 1 year warranty period on this drive and need to get it back to LaCie if there is no other solution.
View 6 Replies View RelatedI've had my G5 for a couple years. I keep it under my desk, so I don't hear much from it, but I have noticed that the hard drive is constantly spinning. It's been doing it for as long as I can remember. Any ideas why, and whether I should expect a failure because of it?
View 2 Replies View Relatedi tried the online support procedure and all i get is a message to fill in my serial number followed by "your model is no longer under waranty. contact a dealer..." although the link that brought me to that page is supposed to be for do-it-yourself-instructions. thx for a lead. my G5 is sitting in pieces til then.
Information:
Dual Core G5, 4GB, 20" Cinema Display, NV7800GT, 4GBRAM
Mac OS X (10.4.10)
I defraged my hard drive with Tech Tool and when doing the reboot, the G5 powers back on, the grey apple shows up then the screen goes to a blue background with just the mouse pointer showing.
Information:
iMac, G5
Mac OS X (10.5)
5th Generation iPod 80gb, 16gb iPod Touch
My mother-in-laws Power PC Mac Mini stopped working the other day. After booting to disk utility and seeing that there wasn't a hard drive mounting I assumed the hard drive was dead. I ordered a replacement from OWC, opened the mini, and put in the new hard drive. Now I can't get the mini to boot from CD all I get is a blank gray screen and eventually the folder with a question mark icon. I was under the assumption I could boot to disc again, format and reinstall on the new hard drive. I also can't get the CD to eject but it is spinning up.
View 7 Replies View RelatedI can't seem to find any instructions online about how to do this, step by step. Want to make sure all personal data is erased. I'm interested in performing a full format that at the very least zeros out the data on disk.
Info:
Power Mac G5, Mac OS X (10.7.3)
When I try to create a new folder and error pops up. It reads: "The operation could not be completed. An unexpected error occurred (error code - 50)."
Info:PowerMac, Mac OS X (10.5.8), G5
Wish to upgrade my PM G5 model 7.3. (June 2004). I have a 2 GHz dual core. Most 3,5" SATA HD today are SATA-300 and SATA-600 could either of these SATA HD be used in my G5, or is there some other specification on the SATA that I need to know before I purchase it? I am looking for two 1 TB HD to upgrade.
View 2 Replies View Related
