After the computer goes to sleep it will not wake. It has a rapid flashing white power button. It took four tries just to get it started again. Started after supllemental upgrade.
Info:
Mac Pro 2x2.8 Quad, 8G ram, Mac OS X (10.7), Acer 24 inch, 300, 500,2x 1000 GB drives, 2TB backup
I have a iBook G4 laptop and there seems to be something very wrong with it. It started a few days ago just randomly. I was reading something on the internet and the screen went black on me, but the power was still on (I clicked CAPS LOCK to see if there was power). I then proceeded to push the power button and the power went off. When I pressed the power button again to turn it on, it made that internal noise it always makes and then the fan came on, and wouldn't turn off. There was no picture on the screen at all. Completely dead. But there was power, because when I clicked on the CAPS LOCK, the light came on). I tried pressing on the power button for at least 15 seconds and even went as long as a minute, and the power didn't go off.
View 3 Replies View RelatedI added 2 sticks of 512 to my power mac g5 1.6. I had ahard time getting the computer to see the new ram, but finally was able to kinda get it working after zapping the pram. However my computer only saw these 2 sticks as 256, odd. So i attempted to troubleshoot the problem. I tried just installing the new ram, but the computer wouldnt boot. I tried a few different combos with the other 4 sticks i had, but nothing. I put the old memory back in, and still nothing. The power led looks to blink once every five seconds or so. I tried pressing the pmu reset button, but still the same out come. I also tried taking out the battery, nothing.
Information:
1.6 g5 single proc
Mac OS X (10.5.1)
I had a weird issue this morning. I started computer and it did not make the chime sound, it didn't do anything at all. I disconnected it from the extension cord as well as all the peripherals attached to it and nothing. I tried a different start up disk and again there wasn't a sound. Then i unplugged it and reset the SMU on the mother board and air sprayed the computer to remove all dust. Then plugged it back and it came back on.
Information:
Power Mac G5 Dual 1.8
Mac OS X (10.4.11)
I'm using a B&W Power Mac G3 with 512MB RAM and OS X Tiger for a SMB file server (with 5 users) and a USB printer server. Everything is working good, but I have a problem.
It doesn't have a monitor or keyboard/mouse attached normally (I can configure it via VNC). The problem is that I would like to be able to turn the machine off when it's not needed (like at night sometimes, days when I won't be home, etc.). I would like to just hit the power button and have it turn off, however it puts it to sleep instead.
Normally, sleep would be fine, except on the B&W, the fans still run, just the HDs shut off, so it's still noisy as heck.
Is there a way to make the power button shut it off? If not, any other easy methods of shutting it off you can think of? Via VNC won't cut it, as my dad needs to be able to turn it on (not a problem) or off as well.
i just got my new imac 2 days ago. I was wondering is there another to turn on the power without pressing the power from button? (cuz i remember u can power on from the keyboard b4)
View 7 Replies View RelatedI have just shipped my Mac Mini to its new home and I've had reports that the panic error is appearing on boot up: "You need to restart your computer. Hold down the power button for several seconds or press the Restart Button." This screen appears on the blue window just after the grey apple screen has disappeared and does not get as far as the desktop at the same point each time. We have tried to reinstall mac OS from the original install disk but holding the "C" Key or the "Option" Key down on restart doesn't boot from disc. Is there a way you can view the Kernel Panic log before you boot into Mac OS so we can try and pin point the source of this problem. I'm wondering if this could have been the result of the shipping that has caused some hardware to come loose.
View 3 Replies View RelatedI still use this old PowerMac G4 (hopefully Apple builds a new MacPro soon!) and when not using it, it is in sleep mode.Unfortunately my cats like to touch the keyboard, thus waking up my Mac.Is it possible to wake the mac only by pressing the power button?
Info:
Dual 1 GHz PowerPC G4, Mac OS X (10.5.8),
When I click on the play button in DVD-player, the button becomes a purple square. Has someone got a solution?
Info:
MacBook, Mac OS X (10.7.3)
My old PPC G5 has the front LED (white) flahing three times - I've looked at the various notes about the poddibility of this being a RAM issue, I've checked out the slots, cleaned them and the RAM sticks too, all to no effect. After being switched on for a while, the fans come on and I have a Hovercraft under my desk!
Info:
PowerMac, Mac OS X (10.5.8), To be supplied
My PPC G5 Mac Power Pro has been working fine, on one startup recently the screen didn't come on, the keyboard and mouse did not pass the startup test and the white light flashes three times. After a while the fans go into hovercraft mode! I've reseated the RAm and checked all other cards.
Info:
PowerMac, Mac OS X (10.5.8), To be supplied
I was working with a Power Mac G5 when this strange thing happened. I had pulled the CD drive from the machine to test out a problem with a new Mac Book computer(door wouldn't open on eject command). Discovered that that we had a wiring problem (I was using the bottom connector not the top). So I go and put the drive back into the Power Mac, turn it on & the only thing on my screen is a small square icon with a picture of the North & South American hemispheres on it, flashing. Can anyone enlighten me as to what just happen & what I can do to fix it?
Information:
Mac G5 Dual 2.5 GHz
Mac OS X (10.4.6)
2.5 GB Ram
I searched the entire internet for this solution. I realize it has been posted but the symptoms were note entirely the same. I have a 1.6 g5. One night it was running awfully slow. I shut it down and didn't touch it for the weekend. When I came home the finder/? Thing flashes. Unlike some of the others, mine never boots and I don't have my discs to run the utility. Does this seem like a hard drive problem or am I looking at apples infamous logic board failure?
Information:
g5 powermac
Mac OS X (10.4.10)
I have an old macbookpro which doesn't have a good battery. last night it shut off because I didn't have the power chord attached. now I can't power it up. the light on the power chord flashes (slowly) between red and green.Â
Info:
MacBook Pro, Mac OS X (10.4.7)
I have a 500GB LaCie external HD, about two years old, with two partitions. It continually fires itself up (whirring noise as if transferring) and off every 5-10 seconds. Oddly, when I demount it, the problem goes away. presumably it's not just the HD - something on the Mac is winding it up.
View 5 Replies View RelatedI installed several system updates on my 2007 iMac last night, running OS 10.7, and today I can only get a black screen with a flashing white power light when I try to start up. My computer will neither start up nor completely shut down, and my wired keyboard won't communicate either.
View 5 Replies View RelatedMy MacBook Air's (2008) screen went blank. Now the power light flashes and it beeps continuously. I have tried rebooting, but no change.
Info:
apple, Mac OS X (10.6.5), iPhone macbook air iPad AppleTV (both)
Anyone else have this problem? I cannot figure out how to fix. iChat will open fine. but randomly it will start freaking out. logging in and then logging out until it says "you have logged in to many times"
View 4 Replies View RelatedI have made a movie on iMovie HD (using a Mac Book Pro) and have burned it onto DVD using iDVD. When I play the DVD on my TV or another iMac there is distortion during any rapid movement, e.g. a quick moving arm appears jagged and lined. There is also a slight blurriness to the general picture (the sound is faultless). Why this distortion is occurring?
View 2 Replies View RelatedYesterday my G5 (Dual G5 2 Gig, 10.4.1 OS) hung up while running illustrator 7, did an escape quit. Now the computer will not restart - a hard drive icon appeared with a flashing question mark. Ran the apple restore disk and the all hard ware pieces checked out fine. When I tried to reinstall the OS it does not open past the install icon. Startup utility does not find the one and only hard drive.
Information:
G5
Dual G5
My brother has a second gen, 800Mhz eMac (the one that could be overclocked to 1.33Ghz - the earlier PC133 ram model). Since about 1.5 mths ago, when he powers it on, sometimes it will not power on, and other times it will give three beeps (diagnostic pages say bad RAM) and a flashing power/sleep light in unison with the beeps. Did this vintage suffer bad caps? I recall that it was only the 1.25Ghz model that had bad caps, but I could be wrong.
View 3 Replies View RelatedI just bought the 1.5 TB WD My Book. I was wondering how to use the power button. Also what is the icon for WD SmartWare for?
View 1 Replies View RelatedMy Macbook Was On And Working And I Tried To Hit The Power Button To Turn The Macbook Off And It Would Not Work....so I Shut It Down Using Computer Shut Down Under The Apple ....now It Will Not Turn Back On......it Has To Be The Power Button Itself....is There Any Where I Could Buy A Replacement Power Button? And Is There Any Other Way To Get It To Turn On Without Using The Power Button?
View 6 Replies View RelatedAfter leaving machine on all night as I usuaaly do in the middle of a project I came in this morning to find power button blinking no -stop. No images on displays.Have reseated RAM (original 2G from Apple and subsequent modules (4x2) from OWC) twice and no change. No peripherals connected and no change.
Info:Mac OS X (10.6.8), Mac Pro 3.0/8-Core, 18G RAM, 2-1Tb
I turn off Imac, using apple menu. Sometimes the power button will work to turn it on, other times it won't. Been to 2 authorized dealers, they can't find problem. Sometimes jiggling or shaking computer will allow me to start using power button. Sometimes I open up case, plug and unplug everything, and then power button will work. Never know when it will work or not. Power button has had continuity check. It checks fine. Power plug is fine, outlet is fine.
Info:
iMac, Mac OS X (10.6.5), Partition hard drive
My mac mini will not shutdown only from the power button?
Info:
Mac mini (Mid 2011), Mac OS X (10.7.4)
I have a white 2008 model MacBook. Due to some unfortunate tampering with the circuits under the right command key on the built in keyboard, a lot of the keys and the power button are now effectively dead. I'be ordered a replacement top case, but was wondering if I could, in the meanwhile, somehow turn the laptop on. I'd prefer to do this without opening it up, though I could if that's the only way. Â
I read in another thread, can't find the link now, that disconnecting the battery, connecting mains, then connecting the battery would turn it on, but that doesn't seem to work for me.
Info:
MacBook (13-inch Early 2008), Mac OS X (10.7.4)
my power button is constantly pressed. While I was using my computer, the screen got black automatically after a few seconds.After I pressed ESC in order to get back to my desktop, after another few seconds, the window asking if I want to shut down / log out / reboot appeared...When I'm trying to boot my Macbook, after a few seconds, it automatically shut down, without warning, as if I was pressing power button for a few seconds to force the shutdown.I can boot if I remain a keyboard's touch pressed during all the booting process, like Maj, or Alt, but as you could imagine, it's not really easy to use a computer with a keyboard's touch constantly pressed....Â
By the way, I won't go to the Genius bar for a few reasons, first, this Mac is 5 years old, so I'd prefer buy a new laptop instead of paying a few hundred bucks in order to change pieces of this old Macbook, secondly, I don't have an Apple Store near my location.
I have brought the 21,5" iMac 1 week ago. I just chosed the preconfigured model.
But i have had some problems with it.When the computer has been to sleep for some hours, it wont wake up with click on keyboard or on the mouse. I will have to use the powerbutton, where the computer then comes with a error, but it starts up.
I know I can get the bulk of it here: [URL:..] But is there a controller board? I can't find any documentation on this thing. I want to use it for a PC. Making an acrylic top is no problem. Just looking for pin-outs, dimensions, and maybe some pictures of someone else dissecting one.
View 14 Replies View Related