I have brought the 21,5" iMac 1 week ago. I just chosed the preconfigured model.
But i have had some problems with it.When the computer has been to sleep for some hours, it wont wake up with click on keyboard or on the mouse. I will have to use the powerbutton, where the computer then comes with a error, but it starts up.
The computer doesn't respond to the power button when pressed. (imac - no intel)
View 1 Replies View RelatedI have to hold the power button down for several seconds to force it to shut down.
Info:
MacBook Pro
I just installed 2 4 gb of ram in my unibody mac book pro 13"
I now get a error saying to push and hold the power button and then restart. The message keeps coming back up every time any thoughts ?
I just got my MBP logic board replaced by Apple, and now it works fine, but when I press the power button, my computer freezes and this happens:
I'm probably bringing it to an Apple certified repair center, but I don't trust them as much as I do the Genius Bar, plus I'm pretty good at DIY stuff, so is it possible to fix this by myself?
So I'm having issues with the computer not waking up in the morning. I guess it goes into a deep sleep of some sort and I have to hold the power button twice to turn it on, and get greeted with a computer experienced a problem message on login.Â
The most recent log in the system diagnostics is titled:
aosnotifyd,diskarbitrationd_2014-08-21-184310_MacBook-Pro.shutdownStallÂ
And the brief details are:
ate/Time:Â Â Â Â Â Â 2014-08-20 22:02:42 -0700
OS Version:Â Â Â Â Â 10.9.4 (Build 13E28)
Architecture:Â Â Â x86_64
Report Version:Â 18Â Â
Command:Â Â Â Â Â Â Â Â No Target
[code]....
Info:
MacBook Pro (Retina, 15-inch, Mid 2014), OS X Mavericks (10.9.4)
i just got my new imac 2 days ago. I was wondering is there another to turn on the power without pressing the power from button? (cuz i remember u can power on from the keyboard b4)
View 7 Replies View RelatedI have a macbook pro, bought it May last year(2008). I don't know much about computers, but I loved the transition between pc and mac, had no trouble with it, loved to work with it, until now. I had noticed it became slower like 3 weeks ago, and a week ago, it started to freeze up on me followed by a message that said please restart your computer by pressing the power button and the screen becomes dark. When I try to restart it again, it takes a while because it shuts down again and again, until the 10th time it works. The store told me to clean intall, which I did yesterday, it seemed to have worked, it was faster for sure, but today it happened again, 3 times! Has this happened to anyone? Does somebody know what to do?
View 4 Replies View RelatedGot a tricky one here: powerbook G4, 1.25ghz, 1GB RAM (2x512), 80gb HD, APX, 15" LCD, serviceable battery, SuperDrive, OS: 10.4.11. It was brought to me with a boot problem: Computer turns on, gives the start up sound, backlight comes on, apple logo shows, spinner spins... then you get the dimmed screen, large option icon and "You must hold the power button and restart your computer": a kernel panic. I've seen this a few times before and the last time, I fixed it with a new hard drive and the removal of RAM from a bad ram slot.
What I did was:
1) Replaced existing 80GB HD with a backup 30GB drive. Then booted with a Tiger CD (the computer won't start with my disk warrior cd, nor with a tiger DVD). I was able to install Tiger and restart the computer. But the airport card doesn't show up. I tried a known good airport extreme card and this too has not shown up.
2) I hooked up the 80GB drive to my PC via MacDisk and checked it. Sure 'nuf it had loads of problems. MacDisk went through and fixed it (I'm not sure what the problems were as I'm new to MacDisk and don't know what it's looking for and fixing when it does).
3) With the computer running the 30GB known good HD, I started having the same kernel panics so I removed the first RAM chip (512MB) and tried to reset the PRAM.... here's where it went wonky. (I know, only change one thing at a time...)
4) As I said I tried to reset the PRAM (Option, Command, P, R, at start up). While I can get the computer to not boot, it won't restart. I don't know if this is just unique to this machine. Next I tried to reset the NVRAM and again got nothing. The screen wouldn't come on at all. After about three or four resets, the computer did start in Open Firmware mode. I reset the NVRAM from there and restarted (reset-nvram, reset-all). Still nothing on restart.
5) After trying to start it 15 times like this, I swapped the bottom RAM card to the top slot and removed the airport card (again, I'm stupidly trying to change two things at a time). BAM, computer boots... I put back in the 80GB drive that's been "fixed" by MacDrive and BAM, that boots fine too.
So then I put back in the airport card and it will boot, but won't recognize the airport card. I've re-seated it about a dozen times and have used terminal cleaner on the card and on the socket for the ribbon cable from the card slot to the logic board. As it sits, I can't get the airport card (either of the two) to show up at all. I did realize that the open firmware did reference a problem, but I forget the code now and when I looked it up, the references were to a failure of the airport card, but there were also more general references, so I can't be sure.
I'm thinking now that it's the airport card controller on the logic board, the bottom RAM slot and a corruption of the hard drive. Yes, there was a history of moisture into the device and I think a drop in it's past too. I'm the Mac repair technician for the people at the local bike shop, so I get to trade my repair work for their bike repair work. The problem is that they ride their laptops like their bikes, hard and greasy. I'm really wondering about ways to get the airport card back up and running. Or, baring that, a good card-based wireless adapter that I can slide in.
This morning when the power button is pushed, nothing happens at all. The button does not light up. The computer does not start.I checked the power cable. I took it out of the computer and put it back in. (I did note that the plug looks a bit darkened but it does not smell burnt.) I tried it in a different outlet. Same thing. It won't turn on.I can't recall if this iMac is a G3 or G4 and I can't find my documentation to let you know. But I don't know that it matters which G it is. It is the old special edition grey iMac and has been working for us for many years.Is this the end for this iMac? Could it be something that is simple to fix?Â
Info:
iMac, Mac OS
X (10.2.x)
Just got a replacement imac 27 stock C2D yesterday for a defective one I had earlier, however, I couldn't get this new one to turn on till just a few hours ago. I just figured out the power button needs quite of bit of pressure to turn on. Seemingly just pressing it until it clicks isn't enough. Should this be looked at or is this normal?
View 5 Replies View RelatedMy Macbook pro is not booting properly. When I start it up, it goes through the normal process and gets to a point where a screen comes up telling me: "You need to restart your computer. Hold down the Power button for several seconds or press restart now" This happens every time. I tried to start in safe mode and holding down the option key and selecting the mac partition. Neither would work.
View 3 Replies View RelatedAs the title states, I can no longer put my computer to sleep using the power button. I have to put it to sleep using the mouse. I miss the convenience of the power button. The window for energy saver is not like the display in support, it is missing the "Allow the power button to put the computer to sleep" option. Very strange. I am running an older desktop (2009) with Mavericks, fully updated. 10.9.4
Info:
Mac Pro, Mac OS X (10.7.2)
Whenever I open my mac mini it comes up with the same message "You need to restart your computer hold down the power button or press restart" in four different languages.
View 2 Replies View RelatedI recently purchased a Mac mini As you all know, the Mac mini has its power on button in the rear of the computer. Due to a stroke I am in a wheelchair and my right side is paralyzed. This means that I have to have my mother or brother turn on the Mac mini for me. Does anyone know of a push button type of device that I can use to power on, and off, my Mac mini? While "push button" would be nice, the powering on device can be a switch. I fully realize that I can leave the Mac mini running 24/7 which I do very often. However, during thunder storms I like to shut the Mac mini off entirely. I do not want to take any chances. I know of a few people (including me with my old Power Mac) who left their computers on during a thunder storm and their computers got zapped.
View 4 Replies View RelatedI have a iBook G4 laptop and there seems to be something very wrong with it. It started a few days ago just randomly. I was reading something on the internet and the screen went black on me, but the power was still on (I clicked CAPS LOCK to see if there was power). I then proceeded to push the power button and the power went off. When I pressed the power button again to turn it on, it made that internal noise it always makes and then the fan came on, and wouldn't turn off. There was no picture on the screen at all. Completely dead. But there was power, because when I clicked on the CAPS LOCK, the light came on). I tried pressing on the power button for at least 15 seconds and even went as long as a minute, and the power didn't go off.
View 3 Replies View RelatedI added 2 sticks of 512 to my power mac g5 1.6. I had ahard time getting the computer to see the new ram, but finally was able to kinda get it working after zapping the pram. However my computer only saw these 2 sticks as 256, odd. So i attempted to troubleshoot the problem. I tried just installing the new ram, but the computer wouldnt boot. I tried a few different combos with the other 4 sticks i had, but nothing. I put the old memory back in, and still nothing. The power led looks to blink once every five seconds or so. I tried pressing the pmu reset button, but still the same out come. I also tried taking out the battery, nothing.
Information:
1.6 g5 single proc
Mac OS X (10.5.1)
I had a weird issue this morning. I started computer and it did not make the chime sound, it didn't do anything at all. I disconnected it from the extension cord as well as all the peripherals attached to it and nothing. I tried a different start up disk and again there wasn't a sound. Then i unplugged it and reset the SMU on the mother board and air sprayed the computer to remove all dust. Then plugged it back and it came back on.
Information:
Power Mac G5 Dual 1.8
Mac OS X (10.4.11)
I'm using a B&W Power Mac G3 with 512MB RAM and OS X Tiger for a SMB file server (with 5 users) and a USB printer server. Everything is working good, but I have a problem.
It doesn't have a monitor or keyboard/mouse attached normally (I can configure it via VNC). The problem is that I would like to be able to turn the machine off when it's not needed (like at night sometimes, days when I won't be home, etc.). I would like to just hit the power button and have it turn off, however it puts it to sleep instead.
Normally, sleep would be fine, except on the B&W, the fans still run, just the HDs shut off, so it's still noisy as heck.
Is there a way to make the power button shut it off? If not, any other easy methods of shutting it off you can think of? Via VNC won't cut it, as my dad needs to be able to turn it on (not a problem) or off as well.
i have my power saver set up so that the display goes to sleep after 30 minutes do i get it to wake back up without pressing the power button in the back?
View 5 Replies View RelatedI have just shipped my Mac Mini to its new home and I've had reports that the panic error is appearing on boot up: "You need to restart your computer. Hold down the power button for several seconds or press the Restart Button." This screen appears on the blue window just after the grey apple screen has disappeared and does not get as far as the desktop at the same point each time. We have tried to reinstall mac OS from the original install disk but holding the "C" Key or the "Option" Key down on restart doesn't boot from disc. Is there a way you can view the Kernel Panic log before you boot into Mac OS so we can try and pin point the source of this problem. I'm wondering if this could have been the result of the shipping that has caused some hardware to come loose.
View 3 Replies View Relatedcomputer won't start. tried unplugging and holding in start button. After about a half hour and unplugging a few times, finally got it going. Imac G5
Info:
iMac, MacOS X (10.5)
I still use this old PowerMac G4 (hopefully Apple builds a new MacPro soon!) and when not using it, it is in sleep mode.Unfortunately my cats like to touch the keyboard, thus waking up my Mac.Is it possible to wake the mac only by pressing the power button?
Info:
Dual 1 GHz PowerPC G4, Mac OS X (10.5.8),
I just bought the 1.5 TB WD My Book. I was wondering how to use the power button. Also what is the icon for WD SmartWare for?
View 1 Replies View RelatedMy Macbook Was On And Working And I Tried To Hit The Power Button To Turn The Macbook Off And It Would Not Work....so I Shut It Down Using Computer Shut Down Under The Apple ....now It Will Not Turn Back On......it Has To Be The Power Button Itself....is There Any Where I Could Buy A Replacement Power Button? And Is There Any Other Way To Get It To Turn On Without Using The Power Button?
View 6 Replies View RelatedAfter leaving machine on all night as I usuaaly do in the middle of a project I came in this morning to find power button blinking no -stop. No images on displays.Have reseated RAM (original 2G from Apple and subsequent modules (4x2) from OWC) twice and no change. No peripherals connected and no change.
Info:Mac OS X (10.6.8), Mac Pro 3.0/8-Core, 18G RAM, 2-1Tb
I turn off Imac, using apple menu. Sometimes the power button will work to turn it on, other times it won't. Been to 2 authorized dealers, they can't find problem. Sometimes jiggling or shaking computer will allow me to start using power button. Sometimes I open up case, plug and unplug everything, and then power button will work. Never know when it will work or not. Power button has had continuity check. It checks fine. Power plug is fine, outlet is fine.
Info:
iMac, Mac OS X (10.6.5), Partition hard drive
My mac mini will not shutdown only from the power button?
Info:
Mac mini (Mid 2011), Mac OS X (10.7.4)
I have a white 2008 model MacBook. Due to some unfortunate tampering with the circuits under the right command key on the built in keyboard, a lot of the keys and the power button are now effectively dead. I'be ordered a replacement top case, but was wondering if I could, in the meanwhile, somehow turn the laptop on. I'd prefer to do this without opening it up, though I could if that's the only way. Â
I read in another thread, can't find the link now, that disconnecting the battery, connecting mains, then connecting the battery would turn it on, but that doesn't seem to work for me.
Info:
MacBook (13-inch Early 2008), Mac OS X (10.7.4)
my power button is constantly pressed. While I was using my computer, the screen got black automatically after a few seconds.After I pressed ESC in order to get back to my desktop, after another few seconds, the window asking if I want to shut down / log out / reboot appeared...When I'm trying to boot my Macbook, after a few seconds, it automatically shut down, without warning, as if I was pressing power button for a few seconds to force the shutdown.I can boot if I remain a keyboard's touch pressed during all the booting process, like Maj, or Alt, but as you could imagine, it's not really easy to use a computer with a keyboard's touch constantly pressed....Â
By the way, I won't go to the Genius bar for a few reasons, first, this Mac is 5 years old, so I'd prefer buy a new laptop instead of paying a few hundred bucks in order to change pieces of this old Macbook, secondly, I don't have an Apple Store near my location.
