Is there any way I can have secondary click activated by two fingered tap on trackpad AND by clicking the bottom right of the trackpad? I have a Macbook, Late 2008
Info:
MacBook, Mac OS X (10.7.4)
My trackpad doens't seem to work when doing 3 or 4 fingered gestures. 2 finger scrolling works and so does clicking. It was working fine last night, even after I did a software update for the new Magic Mouse (which I don't have connected) I've checked system preferences and everything is ticked as it always has been for 3 and 4 finger gestures. I've repaired permissions and I've tried to reset the SCM, however I'm not sure if i've done it correctly.
All the Apple document says is to
hold down the 3 keys and press the power button once.
Then after 5 seconds turn the computer on.
I'm guessing after the 5 seconds i let go of all 3 buttons and then press the power button again to turn it on?
I have an older MB003LL/B when I upgraded to Lion the click bar beneath the trackpad stopped working (partially, only left click works now). Can anyone tell me if this is normal? Is there a way to get the right click function back?
Info:
MacBook Air, Mac OS X (10.7)
I can't use Secondary Tap of two fingers as right click on a trackpad.My laptop is MacBook Pro OS x 10.6.8
View 3 Replies View RelatediWork and iLife only let me secondary click once before I can no longer secondary click.
View 4 Replies View RelatedI've had a 27in i7 for a few weeks now and it's been working great. Just the other day, I set up a second user account on the machine for my wife. After messing with some of the preferences under the new profile, I realised that the mouse wouldn't "right-click" at all in that user account. I go into Preferences>Mouse and check the secondary click box, but this has no effect. When I close Preferences and open again, the box is un-checked. This problem is only in the new user account. My own, original administrator account has no such problem - right-click is working fine.
View 6 Replies View RelatedWhen I right click and open the secondary ("right") menu and accentily right click it again the right click acts like a left click. Is this normal?
Example: When I right click on a picture and the cursor is in the menu it will automatically left click what it is over.
Info:
MacBook Pro, Mac OS X (10.7.3)
we are trying to hook up our TV as a secondary monitor (for hulu, netflix, etc) but it defaults as the primary monitor. We would like to keep the imac as the primary monitor, and have the TV as a secondary, but cannot figure out how to do it! The only way we can get the imac back to primary status is if we use mirror mode. Once we take it off mirror mode, the TV becomes the primary monitor again, and there appears to be no way of switching it in OSX display preferences.
I've done similar hookups with my laptop, and the TV defaults as the secondary monitor. Why isn't this happening with our iMac? Any ideas?
i have a 13" mbp with snowleopard.
some 15 days ago, my trackpad could do all gestures just fine but it couldn't click.
i have the "touch to click" option turned off.
so, after pressing down on the trackpad like 10 times, it could only register one click.
as my warranty was valid back then, i gave my laptop to the service guy. he opened my laptop up, checked the trackpad and said it was fine and he told me that it must be a software problem.
so i erased the hdd and installed leopard and the problem was solved.
whats wrong with my laptop ??
(i checked verified my disk and disk permissions, they're all fine)
Basically, the trackpad works just fine most of the time. However, sometimes (often enough to be aggravating), it will not click. A typical scenario is this: I'll have a web browser or something open and I will want to close the window. So I go to click the red button. The cursor is over the red button, and the button turns to an x, notifying that I am in the right spot. I will click the trackpad, and it will make the click sound, and nothing will happen. I'll try clicking several more times and nothing. The click just won't register no matter how many times I click. What I will have to do to make it work is stop clicking and take my hand off the trackpad for like 5-6 seconds, then click, and it will work. I do not have tap to click on. This is a 15" MBP 2.4ghz i5.
View 1 Replies View RelatedI read somewhere that you can configure a 4 finger click as something like command-Q. I can't see that anywhere in the keyboard shortcuts menu (there is no trackpad shortcut menu as far as I can see).
View 2 Replies View RelatedMy 13" MacBook Pro will not allow me to click on the trackpad. I can do everything else (scroll, tap to click, etc..) but I cannot actually physically click the pad anymore. What is going on?
Info:
MacBook
Pro
iMac running 10.7.4. Trackpad won't do right click, none of the 3 options. When right clicked, current screen shrinks to left.
View 1 Replies View RelatedI've had a number of problems after installing Yosemite. One is that when I click on a drop-down item in the main Finder navigation, the first click of my trackpad seems to "release." I have to click a second time to take action.
Other problems after installing Yosemite have included booting only to reach a gray screen with the cursor in the upper left corner ... that's as far as it got. I've also had my screen images become something like a pixel puzzle ... rips, tears, and disintegration. I've done clean installs and reloaded content from a Time Machine backup and that has mostly, but not completely, resolved the problems. These problems, including the need to click twice described above, have occurred on both my iMac and my MacBook Pro.
Info:
iMac (27-inch Late 2009), OS X Yosemite (10.10.1)
For the new MacBook Air owners: how loud is the click on your trackpad?
I have a black MacBook which has the separate button (pre-glass trackpad). It's almost completely silent. On almost every unibody MacBook Pro though, the click is really loud and can sometimes even be heard in the next room.
How is this with the new Airs? Still loud or not really noticeable? I like to click instead of tap, but not if everyone can hear my neurotic clicking all day long
The mouse wont move, the trackpad clicking doesn't work. Gestures work, but even tap to click doesnt work. The animation on the dock doesn't work either.
View 2 Replies View RelatedYesterday I was using my MacBook Air. And I began to hear a loud click, when I clicked on the trackpad, click bar.It's a mechanical sound, it actually comes from the click bar, but only on the left side. I couldn't figure it out, but my son was at home, and he did.The left side of the click bar has raised up a tiny bit, maybe a 1/64th of an inch. The right side remains flush.Apparently something underneath the click bar has broken, or whatever, and allows the left side to float.
So when I click, the sound I hear comes from the raised end of the click bar, as it travels up and down.I'm going down to the Apple Store tomorrow morning to see a "Genius".What are my chances that they'll replace my MBA, rather than sending it to neverneverland?
Just got the new 2.0 macbook and installed windows xp in boot camp, I configured the multi touch trackpad to do a secondary click with both two finger tap and lower right corner click. Everything works fine in leopard, but in windows the right click is not working, but it does work if I use a usb mouse.
Anyone have this problem or know a solution to fix this?
I have been trying to do some research on this, but it seems so specific, and all the trackpad stuff is about the ones on the new macbook line. I have a MacBook that I got towards the end of 2006. Here is a link to the tech specs. I have the 2.0Ghz one.
http://support.apple.com/kb/SP23
As soon as I turn on my computer, if I use the built in trackpad and mouse, I can move the cursor around, and the keyboard still works, but if I try to click anything by either tapping the trackpad or hitting the buttons, it won't click. However, if I shut the computer down and plug in a USB mouse and then restart the computer, the USB mouse works. If I even slightly brush the trackpad or hit the mouse button on the computer, the USB mouse will stop working and I have to restart again.
I've been considering either a MacBook Pro 13" or a MacBook Air. I'll probably wait until the next MB Pro refresh (looks to be toward the end of March), and either pick up a new one, or possibly a refurb (of the earlier models) or close-out. Not sure yet.
I'm a long-time Mac user, on Macs exclusively since 1987, so no stranger to the platform.
I was checking out the MacBook Air (Apple Store and Best Buy), and noticed something about the trackpad.
It has the "button" at the bottom. But - try as I might - I could not configure it to do a "right click" (that is to say, press "towards the right" on the button to display a contextual menu).
I was able to go to the "trackpad" preference, and was able to set up the "two-finger touch" to invoke the "right click". But there seems to be no way to use the right end of the trackpad button itself to do this.
Is this correct, or did I miss something?
By comparison, it is easy to set up the MacBook Pro to do a right-click, even with its "buttonless" trackpad.
But this feature seems missing from the MB Air.
Is it?
The trackpad on my 2009 Macbook has suddenly gone stiff, I can move the cursor around however the button is stuck down and can only highlight text and will not let me click. A small drop of water hit against the pad 5 minutes before this happened so i don't know if this has anything to do with it.
View 1 Replies View RelatedThe trackpad of my MacBook Pro mid-2009; the clicking does not work, only tap to click works but i want to click not by tapping just the normal click but it does not ork. I tried taking out the tap to click and still nothing.
View 1 Replies View RelatedEvery now and then my trackpad acts up. When I scroll down/up (2 finger swipe down/up), it does a right click instead of scrolling. I bought this brand new at the apple store and its acting up within less than a month. I don't want to have an exchange if they'll give me a refurbished looking one.
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
I've been using MacBook Pro for over a year now and everything was just fine, but now, right click isn't working anymore. It is working on some sites actually, but not on every site (for example: [URL]) I just can't click the right click button on this site for example?
Info:
MacBook Pro, OS X Mountain Lion (10.8.5)
Is there a way to enable a middle click on a trackpad?
ie, similar to using middle click on a mouse to open new tabs while browsing.
The trackpad "click" seems to be stuck down. I can "tap to click" but because it's clicked trackpad commands dont work. no scrolling with two fingers etc.
View 2 Replies View RelatedI just got a 13" MacBook Air and I'm having an issue with it; googling around I've seen slightly similar problems, but nothing identical to what is going on with mine. I have the trackpad set to use the "tap to click" option in System Preferences and I've noticed that after I sleep the machine and wake it again, something gets bungled with it. The tap to click either stops responding entirely, requiring that I use the regular physical click instead, or it's highly, highly unresponsive. I've seen other reports of erratic clicking and the mouse moving on its own after sleeping the laptop.
Which thankfully mine isn't doing, but I haven't seen anybody reporting this slightly more demure issue. In any event, rebooting the machine fixes the problem completely until I sleep it next. I'm not 100% convinced that this is an Air issue, however, since I think it affected my 15" MacBook Pro to a lesser degree right after I upgraded that machine to 10.6.5, but I can't be entire certain of that since I no longer have that laptop and rarely used it without an external mouse in the first place.
Just bought my MBA about a month ago. Recently it started doing something weird, mostly on the dock icons.
Sometimes when I go to click on an icon, it doesn't do anything, regardless of whether I am clicking, double clicking, or pushing the button below the trackpad. I end up having to move the cursor off of the icon and back on once or twice before it will let me click.
I have early '09 uMBP17 and I'm experiencing one of the issues which apparently plagued first TrackPads: when I press a TrackPad it clicks, yet application doesn't register the mouse click. It happens 50/50. If I press harder/hold pressed a bit longer - it works more often. Still very very annoying.
I have seen that issue with late 2008 MBPs was resolved with trackpad firmware update (and my uMBP17 has the update already).
Has anybody experienced the issue on early 2009 MBPs? MBP17?
All time PC user and finally picked up my first Mac, a brand new 2010 2.4 MBP! Just wondering, being used to normal tap to click functions from PC machines im wondering. Do most of you MBP users use tap to click or actually use the click on the trackpad? I've noticed using the click is more accurate as far as responses, but isn't as efficient/fast as using tap to click. Can I get suggestions from you MBP users on what you guys use? I'm far in between the two so I want to know which one I probably should use so I basically "learn" to use it over time. Also, noticed when I activate tap to click and use dragging, when I start to drag a window, and find the place I want to leave it. I'll raise my finger like 1mm in the air and it still registers my finger there and will still move it. It wont unlock my finger from the drag lock unless I lift it more than 3mm off the trackpad.
View 24 Replies View Related