OS X V10.7 Lion :: 10.7.3 Combo Update Panic Crash With Wacom Cintiq 21UX
Feb 16, 2012
I installed the 10.7.3 Combo Update yesterday on my iMac (Early 2009) that has a Wacom Cintiq 21UX connected. Prior to updating, my system was working absolutely fine, and I could turn the Cintiq's power on/off at anytime without concern. Now, my system is consistently crashing when I turn the Cintiq's power off/on. A pop-up window appears that reads: "You must restart your computer."Again, this was not an issue prior to the 10.7.3 Combo Update.If I wake my iMac from sleep mode, with the Cintiq turned off, my system will immediately crash when I turn the Cintiq's power on.Similarly, if I cold boot my system with the Cintiq off, and turn it on at anytime after the Mac login screen appears, my system will immediately crash.
Info:
iMac (24-inch Early 2009), Mac OS X (10.7.3), Wacom Cintiq 21UX
I installed 10.7.3 (combo) from 10.7.2 yesterday on my Mac Mini and everything was smooth-ish, a bit of slowness here and there.
Today my Mac crashed completely, I couldn't Force Quit the app I was in, nothing. So I held down the power button and did a restart. After I did this, all I got was the grey apple with the spinning wheel for ages and ages, and then got a Kernel Panic screen.
I did what it said and restarted again. This time it just repeated and repeated the startup tone, and then going to kernel panic again.
I have tried everything I know of. P-RAM reset, Safe Boot, but nothing works.
I recently purchased a cintiq 21ux, when I connected it to my macbook pro 15'' (with the usb cord it has)it only works as a giant drawing tablet with no monitor display.
Having trouble with my IMac, I'd like to pair it with my Cintiq 21Ux but i don't know how to dual the monitor ! my Imac doesnt have any DVI ports, only thunderbolt, how can i connect my Cintiq as a monitor as well ?
I have recently purchased a Wacom Cintiq and it works fine with my PC desktop, however, all of my drawing and painting software is on my macbook. I have been having problems getting the Cintiq's display to work.
The Cintiq basically works as an additional monitor, and has a DVI-I cable. The Cintiq came with a DVI-I to VGA adapter, so I simply bought a Mini-DVI to VGA adapter at Best Buy (the apple brand adapter). I hooked the adapters together, turned on the Cintiq then turned on the Macbook and went to "Displays" under "System Preferences". I clicked on "Detect Displays" and the Macbook was able to detect the Cintiq fine. I then did what the Cintiq manual told me to do by configuring the resolutions and all that, but despite this the Cintiq did not pick up any screen from the Macbook. The error message on the Cintiq read that it did not detect any input from my Macbook, which is odd because the Macbook was able to detect the Cintiq just fine.
When I connected my Cintiq to my PC (by use of the DVI-I to VGA adapter as well) the Cintiq picked up the screen within seconds of turning on the PC. What is the problem here? I really do love my Cintiq but it is useless if I cannot use it with my work Mac. Do I have to buy a new adapter or am I doing something wrong with setting up the monitor? Or are the Cintiq and Macbook simply incompatible?
Software Update says that 10.7.4 is available for download. I attempted to install it and type in all my usual password info, but the system says:'The update Mac OS X Update can't be saved. You don't have permission.'I then downloaded the combo client and attempted to run the package. It stated that 'The installation failed. The Installed can't create the folder "/var/folders/z7 etc.'Not exactly sure what is happening. I've tried repairing permissions, and it did not work. I am the only user on the account.
Ever since I downloaded OSX 10.7.3 Build 11D50b, I have had problems with the system failing to wake up when it has been asleep for a couple hours or more, also it tends to crash now.
I just ran software update on my 1 yearold imac, it showed 4 things needing updated so i clicked download and install as usuall but when my computer restarted to install the updates it said there was an unexpected error before it finished installing and gave me an option to restart which i choose to do, but now it keeps showing
Panic (cpu 0 caller 0xfffffff800064ba7b): "unable to find driver for this platform" and so on....
Mac os version:
Not yet set Says i need to restart my computer. Hold down the power button until it goes off, then press the power button again.
Already tried that nothing happens just boots up n shows the same thing.
Info: iMac (21.5-inch Mid 2011), Mac OS X (10.7.4)
Since 12th May when updated to 10.7.4 have at least one kernel panic per day sometimes four per day which means iMac i3 is useless for running a server platform. Multiple entries about this form may users is there a bug in OSX update? My recovery partition holds 10.7.2 any idea if this is bug prone as well?
Info: iMac, Mac OS X (10.7.4), Still occurs if Safari 5.1.7 not in
If you have an ALUMINUM MacBook and you updated to 10.5.6 with Software Update (NOT the Combo Update), then please post the build number here.The more replies, the better.Also, please specify if you have 2.0 or 2.4.
Can anybody help me in how to update the MAC OS X 10.5.4 to 10.5.8, using COMBO UPDATE. I had downloaded the mac os x combo update for developing applications for iphone using sdk.
I just purchased a Pro Tools system, and they strongly recommends using the combo update. The problem is I allready have the normal update installed on my imac. So my question is if I can download and install the combo update, even though i'm allready running 10.5.6 trough the normal update?
Right after I ran the 10.5.5 Combo update my computer went haywire. I'm getting random -50 errors left and right. All kinds of stablility problems are showing up. I can't make folders. I can't copy and paste. I tried to download something from safari and it said I didn't have enough disk space even though I have over 250GB free. Then when I try to restart I spun on the grey screen for hours. Tried to reinstall the OS from the disk and it failed. Lost a lot of files. I switched users and my external HDs unmounted and couldn't come back. It's gotta be the update right? I heard of about 4 other people who use their computers in completely different fashions who all had the same or close variations to these problems when they installed the new updates.
im trying to update my 10.4.11 Mac osx on my macbook pro with the 10.4.9 combo update (intel) I have 40 gigs of free space on my harddrive. Ive tried the repair disk permissions and have downloaded the update directly from the apple site. I keep gettting this message (with a red exclamation mark):
"You cannot install Mac osx update combined(intel) on this volume. This volume does not meet the requirements for this upddate"
Anybody have the 12WX working correctly with lion with no previous wacom installed? hooked it up right away with no problems on a leopard mac pro. had working windows xp on virtual machine no problems.with imac lion, would not run the install drivers from disk (PPC). so installed the latest 6.2 driver and a bamboo intuos 3 driver as recomended by wacom. installed driver for pen. the bamboo driver worked for a day or so ( with no option keys working), but had 4 point calibration unlike the two point from leopard install.now, neither are recognizing a tablet connection, only works as monitor. uninstalled. tried an older driver 6.15. ran fix disk permissions, reset pram. restarted(+++). dis and re connected. reinstalled again and again. still no luck getting it running on a new mid 2011 imac with lion.
After downloading the 10.5.8 Combo update I click on it to launch and I get an error message that the .dmg failed to mount b/c it was "not recognized".
I've been having some issues with Mail (long story- anything after an image or an attachment in a message I create is showing up as a .htm or .txt file) and one suggestion that someone made was to download the 10.6.2 combo update and try to reinstall it to ensure that everything is all up to snuff.
Strangely, when I DL'd the combo update and tried to run it, my hard drive showed up with an exclamation mark and said I couldn't install it. Can one typically install the update on itself?
Also, is there any chance in heck that it will actually make a difference (friendly wagers here are fine, as I don't expect anyone to know for sure)?
Can I still get the combo update or should I simply get the regular update? I understand that the combo is all of the updates but just trying to see which will be better..
My Wacom ("Bamboo Fun") has suddenly developed strange cursor patterns. It won't immediately wake up. It will sometimes jerk across the screen. It has real trouble -- very often -- with tools (esp. Straighten and Crop) in Photoshop Elements. And I've been through all possible checks, cleaning up and installing of the latest software with Wacom -- everything's copacetic.
Power PC 17" Powerbook, 1.67 speed, 1GB Ram, 9GB available, stay up with all updates...all of a sudden only Internal Microphone and Digital In appear. Did Permissions before and after update, tested with plugs in and plugs out of line in and line out, so Whassup?
I updated a Mac G5 desktop from 10.5.2 to 10.5.8. When I finished I realized I had used the server version of the combo updater instead of the regular one. The machine seems to be running OK. Will this cause problems and how should I fix it.
Have a G4 desktop running 10.3.5 that I tried to combo update to 10.3.9. The update was stuck at 30% for a long long time. I just figured it might take awhile and took a nap. I awoke and there was an error message that the update could not be completed. It said to try the update again by downloading it and then opening the package manually. So I was going to do that but a bit later the computer froze up and I had to force shutdown.
Upon booting the screen didn't boot all the way; only partially and then screen goes black. I ran Disk Utility from Install Disk to try to Repair the hard drive. It said keys were out of order. Later it said repair couldn't be completed because of an error.
I am running the Mac now from a Firewire drive with 10.3.2. I want to update the Firewire drive to 10.3.9 and want to make sure the same thing doesn't happen.
i just updated from 10.5.1 to 10.5.8 with the combo update. it now will just hang at the apple logo. i have a dual boot on the same drive with 10.4.11 thus i am able to post this.. disk utility finds no errors. reinstalling is last resort.. ibook g4, 1.2ghz, 1.25gb, 80gb.
Every time I try to download the combo update from Apple I'm getting the message "Mounting Failed." Does anyone have a fix for this or know why this is happening?
i've tried to install 10.5.2 via the software update and directly downloading the update. either way, it eventually says it can't validate the contents of the package.
am i the only one who is not able to install the update? is there a solution to my problem?
