After the last update I cant transfer files to my external harddrive it gives the following message "The operation can't be completed because the item is in use".
Info:
MacBook Pro, Mac OS X (10.7.4)
IF I only have 1 Mac with data and setting that I do not want to loose, can I use a hard drive to migrate too data and setting until my Mac is for matted and ready to be re-loaded ? Whats the closest migration benefits I could get having 1 mac?
View 8 Replies View RelatedI wish to migrate from a MacPro 2009 to a newer MacPro but keep the original monitor. Can I operate Migration Assistant with only one screen? If one screen can be used, to which computer should it be connected?
Info:
MacPro, MacBook Pro, MacBook Air, iPad
I'm unable to update from 10.6.4 Snow Leopard to the 10.6.5 Security Update - either from built-in Software Update, the downloaded 10.6.5 Combo update, or the full 644MB OS X 10.6.5 Update. Using Disk Utility to Verify or Repair Disk Permissions I see the error - "Warning: SUID file "System/Library/CoreS. As been modified and will not be repaired". Also my Mac Mini 2.0Ghz 4GB RAM, 320GB HDD is pretty much on 24/7 and I've rebooted several times after each attempt listed above and running Disk Utility before each reboot and before each attempt.
An aside to this, I'm unable to use the numeric keys above the keypad on my Apple Keyboard Pro [aluminum] for the past 20days. Yes I've checked System Preferences:
Keyboard: Restore Defaults, Full keyboard access = All Controls, Modifier keys = [only Apple Keyboard is selectable], and I've restored defaults, Expose Fkeys have been removed [tried and set back to no avail]. Lastly, I'm unable to use the powered USB ports on my Dell monitor which worked just a few days ago before my wife moved around the desk - doubtful she would've damaged anything [she knows I'm anal about the Mac - I work with PCs]. I'm unsure if all are related and I DO recall having to do the 10.6.4 Combo update from the original shipping Snow Leopard. Have I missed anything to test?
[Quote]
Since I updated Snow Leopard to Version 10.6.8 on my MBP15, I can't use my SyncMaster P2770 HD (Samsung) in its highest 1920x1080 resolution anymore. I can choose 1920x1080 in the monitor-preferences, but having done that the resolution remains at 1680x1050 @60Hz (I can see it and even the monitor's info-menu says, that i still use 1680x1050 @60Hz). I use a Mini DisplayPort to VGA-Adapter and a VGA-cable.
Info:
MacBook Pro, Mac OS X (10.6.8)
I was trying to update my G5 to snow leopard from leopard 10.5.5 when it said it could not install. So I decided to quit installation and boot from 10.5.5. It started up and reaches the apple loading screen but goes off without reaching the log in screen. I have tried booting from the CD again and resetting the PRAM but it still wont work and continues to do the same
View 2 Replies View RelatedI have a 2011 Macbook Pro and an older (5 year old) Western Digital external hard drive. I have always used this hard drive for both mac and windows. Recently, however, whenever I go to transfer a file from the mac to the WD hard drive, the little transfer window pops up and it appears to initiate the transfer. However, it never fully starts it. It appears to "get stuck" in that initiating stage, showing zero of 3.16 gb transferred and shows an unknown transfer time. This happens no matter how long I leave it open. Again, I have used this external hard drive with my macs for the past 5 years without any problems until now. I haven't moved or modified the WD hard drive
Info:
MacBook, Mac OS X (10.5.5)
I was doing a major cleanup with an external Seagate USB HDD due to low free disk spaces. It has two partitions/drives: FAT32 (using it for on other non-Apple machines like Windows 2000 SP4) and HFS [Time Machine only]). I threw about 30,000 items (copied from an old Windows 2000 SP4 machine's HDD with NTFS back a few years ago) from FAT32 partition/drive into the trash can. However, I am having problems emptying it.
Most of them were emptied, but some were left behind. This four years old MacBook Pro's Mac OS X 10.5.8's Trash dialog boxes said "The operation cannot be completed because you do not have sufficient privileges for some of the items." and "Emptying the Trash cannot be completed because "<filename>" is locked. To empty everything in the Trash, including locked items, press the Options key while selecting Empty Trash".
[URL] for the screen shots/captures of the error messages. I tried holding Option key and emptying trash, but that didn't work. I used Finder to look at the files, and they had locked status. So I unlocked them which worked, but I can't delete the empty folders/directories, and these don't have locked. What's going on and how do I empty the trash?
Info:
MacBook Pro, Mac OS X (10.5.8), 2.4 Ghz; A1260 model; 15" size.
I have a pdf file, I want to copy certain pages from to a new file and rename the pages afterwards.
This is the awkward behavier, preview.app gives me, trying to do so:
It does not let me create a new pdf out of the program (command + N or file/new file) - why?
Instead, I have to drag one of the pages I want on the desktop, to create a new pdf file there.
Once I created a new pdf and dragged the wanted pages into my new file, I cannot rename the pages, which have now meaningless names including "(dragged)" in the middle. I have found no logical way, to rename these pages - why?
Do not ever plan, to save time in just selecting more than one page, to drag and copy over to your new pdf - you will end up with an alias in your sidebar of the new pdf file, which of no reason making sense to me is undeletable - which means - start over again!
I'm running Time Machine on a Western Digital network storage device from my iMac. It works fine. I can go back any amount of time and recover files as they were backed up then. But I also want to be able to depend on Time Machine backups to allow me to recover files if my iMac goes down. So just as a test, I tried to use the Browse Other Time Machine Disks feature from my MacBook Air. I can't make it work. It shows me a Choose Time Machine Disk to Browse window, but there are no disks in the choose pane.Â
People have been telling me that I have to "mount" the volume, but I see no way to do so. Clicking Go - Connect to Server - Browse, shows me that the backup disk is there; it's called <mydiscname>-backup. But when I try to connect to it I get an immediate connection failure.Â
 I'm beginning to suspect that there is no way to restore from another computer when the Time Machine backups are on a network storage device? If this is true, people need to know it and stop using network storage for Time Machine, as it won't be safe if their principal Mac goes down.Â
Info:
iMac, Mac OS X (10.5.2)
Finder and itunes cannot access files and folders have disappeared from external hard drive. On OSX 10.6.8, How can I bring them back? Started when the usb connection failed. Firstly I could see the folders in finder but could not open them, now I can't see the folders. I tried opening photos from phtoshop and though I could see and select them, it crashed when I tried to open them. When reimporting CDs it asks if I want to replace existing files? Should I repair permissions?
Info:
Mac mini, Snow Leopard
Can anyone tell me where iTunes is storing all my MP3 music and playlists information? Usually, I find it under users/music/itunes/itunes media
Well, just went there and nothing is listed inside the iTunes folder.
Is there some sort of protection in place preventing me from accessing all my stored MP3s and playlists?
I want to list the files (Canon images, file names of the form img_xxxx) stored on an external drive (named WINBACK), a partition on a USB HDD. What I did:Â
1. Clicked on drive WINBACK in Finder.
2. Typed img in spotlight search box - Finder window changed to the full spotlight window. Window shows <Search: 'This Mac' "WINBACK">
3. Changed 'Contents' to 'File Name' so top line of display showed < Search: 'This Mac'Â "WINBACK"Â | 'File Name' >.
4. Clicked + to give a search line.
5. On search line changed 'Kind' to 'Name', changed 'matches' to 'begins with' from the drop down lists and then typed 'img_' into the search box.
6. Clicked + to give another search line.
7. Changed 'Kind' to 'File extension', and typed 'jpg' into the search box.
8. This gave a list of files img_xxxx.jpg (obviously 0 < xxxx < 10,000).Â
As there appeared to be some duplicates I checked the paths of the files. Some were from "WINBACK" but most were from various locations on the internal drive.Â
At first, I tried to upgrade and the upgrade failed to the point of rendering the system useless. I then decided to reformat the drive using disk utility and try a clean install. I then got this error and I'm stuck and have no clue what to do now: "The installer can't extract files from the package for BaseSystem. Contact the software manufacturer for assistance." I have never encountered anything like this before.
View 3 Replies View RelatedI went to make a copy of an important drive and accidentally re-formatted it (re-formatted mac journaled, originally mac journaled). The drive contained a bunch of important disk image files which I need to retrieve whole. I'm fairly confident that the files are still there and only the table information got overwritten, as the re-format took about 30 seconds. None of the recovery software I've seen however, can retrieve .dmg files, or such large files (these are up to 32 gb each in size).how I can retrieve these disk image files?Â
Info:
Mac OS X (10.6.8)
I was trying to delete one file , so i dragged to trash, then all of a sudden I realize my entire Drobo (3TB Huge) was highlighted and deleting to my trash! So now I have a trash folder full all my Drobo's content and I can't figure out how to get it all back to "put back"! I'm afraid that I am going to inadvertently empty trash and lose my entire Drobo's contents! I need to figure out how to undo or put back ... come on Apple. Why'd you make this so difficult?
View 5 Replies View RelatedI had a goodworking SUS (10.6.8) working but the drive is getting full so i change the location of the files to another disk (in the xserve)and follow instructions from Apple (page 84 from the manual System Imaging) sudo cp -p /private/var/db/swupd/html /Volumes/My_Volume/My_Software_Updates_Folder/This works and i copy the files to a new drive. I also change the SUS so that theu host files for Lion clients url..works also, start SUS in Server Admin but when clients wants to connect i get an error that there is no SUS available and when i use the browser for an check i get een Forbidden error url...ForbiddenYou don't have permission to access /index.sucatalog on this server.Apache/2.2.21 (Unix) Server at 127.0.0.1 Port 80.
View 1 Replies View RelatedToday I performed a clean install of Snow Leopard on my late 2009 Mac Mini. After completing the installation, I began running software update to bring everything up-to-date.While software update did find and install a number of updates (10.6.8v1.1 Combo update, Security Update 2012-002, Apple Software Installer Update, iLife Support 9.0.4, Remote Desktop Client Update 3.5.3, Airport Utility, Java, Safari) it did not find an update for iTunes (which starts at version 9.x, I believe, in a SL clean install).I assumed that this was some sort of random glitch and manually downloaded and installed iTunes 10.6.3.After that, I re-installed iLife '11 (from a retail DVD, not the App Store).When I ran Software Update again, it found updates for Garage Band, iDVD, and iWeb, but it did not show the updates for iPhoto and iMovie.I found this to be unnerving, as I performed a clean install when I first obtained this Mini a few months ago and didn't experience any of these problems - all of my Apple software updated automatically through Software Update without a hitch.
I began researching this problem online and found that other people have been experiencing this same problem (or some variation of it), and it seems like it began appearing around the time Apple updated some of its security certificates in March.In particular, I've found several references to the missing iPhoto update.This one is especially noticeable because an iPhoto library created in iPhoto 9.2.3 will not open in iPhoto 9.0, and this generates an error upon opening the program (i.e., a user backs up their iPhoto library created in 9.2.3, performs a SL clean install, reinstalls iLife, goes through the Software Update process until it shows that no more updates are available, and are shocked to find that they are unable to open their backed up iPhoto library because they have an out of date version of iPhoto).The most common (and admittedly logical) solution proposed in the threads I've read is to download any necessary updates directly from the Apple website. However, I am curious as to why this previously functional feature now appears to be broken.Has anyone else been struggling with this? Does it indeed have something to do with the new security certificates? Is Apple aware of the problem?
Info:
Mac mini, Mac OS X (10.6.8)
So I bought a 2tb external drive to save space on my main drive - I copied all my movies and have been dropping a bunch of mini dv tapes onto it - but when I open the drive none of them show upÂ
When I get info in disk utility I get one that shows I have avaialble 1.99TB of 2 TB - and right below it says 890 MB are used - don't get it
Tried the disk utility and it says they are working fine .... repair did not seem to do anything
Info:
iMac, Mac OS X (10.6.8)
About a month ago I bought a G-Tech 500 GB G Drive. It is formatted for a mac and has worked fine until yesterday. At first it would not stay mounted. I would have it connected and after a few min would disapear off the desktop and I would get a message saying it was improperlly removed and whatnot. Also when that was going on there would be trash in the trash bin whenever I connected it and it would not let me empty it. I then unplugged my power cord and turned it off for a good 20 min. Since then I haven't gotten those issuses again. At that point I was able to do stuff such as listen to music on iTunes, as I have ALL of my music on the external drive. However when I would try to move anything to the drive I would get one of a few errors. The first being along the lines of " file cant be transferred because the file name is too long". Another one I can remember was "cant be transferred because one or more of these files cant be read/written - error 36". I was using the firewire hookup so I tried the USB and got the same results. The only thing I did yesterday before all this was do a software update, since I hadn't in a little while, and I repaired permissions on my internal drive. I also fiddled with the security settings a little. Im thinking something I did there messed everything up? Im lost here I feel like I've tried everything. Losing all the files on that drive and reformating it isnt an option here since i would lose everything and pretty much have no use for the drive anymore.
View 2 Replies View RelatedIs there an easy way to transfer files to my external HD and have the files automatically removed from my Start Up Disk when it is done? Bottom line, all of my iTunes stuff, movies, is sucking up my Start Up Disk...I want them to be moved to the external Hard Drive and off the Start Up Disk. I just redirected my storage location for iTunes, but now want them off the Start Up disk but am obvously worried about losing them all..
Info:
iMac G5, Mac OS X (10.4.10), iPod 60GB, iPhone 8GB
im not able to transfer files between my macbook pro and iPhone5s using airdrop
Info:
iPhone 5s, iOS 7.1.2
My new iMac is arriving tomorrow and I need to transfer everything over to it. I know about Migration Assistant, but I want to know if there will be any complications due to the data I have on an external hard drive.
Specifically, I currently have an older (white) iMac hooked up to two 2TB external hard drives. One if for backup but the other one has all my iPhoto and iTunes content on it, including about 1.5 TB of movies and TV shows that I have ripped. None of this material is on the computer's internal hard drive - it is all on the external hard drive.
Because my new iMac has a 2 TB internal hard drive, I want to transfer all the iPhoto and iTunes content currently on the external hard drives onto the internal hard drive of the new iMac. Will Migration Assistant handle this and will it be clear what I need to do?
My friend wanted some files to be transferred to his external hard drive from my Mac. As he is a Windows user, I guess his hard drive is formatted for Windows as well. As I plug in the hard disk in my Mac, I can't transfer the files. It says something like "the disk cannot be modified". So, please help me on how can I transfer this files from my Mac and if I do format it to work with the Mac, will it work for Windows later?
View 2 Replies View RelatedI have an iomega external HD. When ever I try to transfer files from my mac internal HD I get the message "the Item could not be moved because "iomega HDD" cannot be modified." This HD works fine with windows, but is doesn't seem compatible with my mac. Any way to fix?
View 4 Replies View RelatedI pretty much made the switch to all MAC a few months ago. I have a few external drives that i use with Media players and they prefer and work better when formatted to NTFS problem is, MACs can only read and write to FAT32. I have Windows 7 on my macbook ( though my movie collection is on my iMac ) via bootcamp, so that isn't a option. I heard and read about some programs and what not.. but what is the fastest and easiest way to transfer files from my iMac to a NTFS formatted HD? I have movies ( some over 4gb in size ) on my iMac.
View 1 Replies View Relatedtransfering files from my MacBook Pro to my external harddrive. I want to transfer my "Music"-folder to the external harddrive, but I get an error which says (translated from Danish to English): "The action can not be completed, because you do not have permission to access some of the topics"
View 7 Replies View RelatedI am going to get an MBP 17" in 1 month time (first Mac) and I would like to get an external hard drive for backup & media storage.
My media files are on a desktop PC and, as I am also about to move to a different country, it would be ideal for me to do the following:
1) get the external drive and transfer files from PC to the drive now
2) take it with me and connect it to MBP when I get the Mac
As mentioned, I have never owned a Mac and all the stuff I find on the internet relates to transferring files from PC to Mac. Is it possible to transfer those files to the Mac drive "in absence" of the MBP?
I just received a Mac OS Lion and I can't transfer any files from a USB or an external driver.When I try to transfer any file, a window showing the transfer appears but when it's finish, the file isn't on my computer.Even when I spotlighted it, it's not here.
Info:
MacBook
I just bought my first imac and need direction to install files from my external hard drive.
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.3)
