OS X V10.5 Leopard :: Backup Drive Ejects After TM Backup?
May 7, 2012
I have an external 1TB WD My Passport drive which I use for TM backup's. When I plug in via USB, DriveUnlock appears. I unlock the drive, then instigate a TM backup. All goes fine, then from what I can gather, when the TM backup has finished, the drive ejects itself. There is no error messages, unmount drive issues, it just dissappears from finder. I can only assume the backup has been successful, as no error messages appear, meaning the drive wasn't ejected while backup was in progress. I have changed the USB cable, as well as tried different ports, but the same always happens. In System Preferencies/Energy Saver, I have made sure the Put HD to sleep is un ticked. Still it happens. Has anyone else had this problem, and is it fixable? I would love to keep the drive attached and backing up for the period I am working, usually 12 hours a day, rather than the once a day at the moment.Â
Info:
Time Machine, Mac OS X (10.6.8), MacBook Pro
Is there a way to make a backup of your Time Machine backup on a 2nd hard drive? I want to be doubly sure that my data is backed up!Right now I get an error saying that the second hard drive isn't authorized to copy my Time Machine data from the original hard drive I have set up as my Time Machine.
I just purchased a Seagate 3 TB USB 2.0/3.0 external drive to use as my time machine backup drive. I have a MacBook Pro that was purchased about 3-4 years ago. The MacBook Pro has a 120 GB hard drive and is currently running MAC OSx 10.6.8. I also have another WD 1 TB FireWire external drive that I use to store all of my media files. Â
After I followed the instructions for installing the new Seagate drive for use with the MAC OSx, I initiated a time machine backup. It very quickly determined that it needed to back up almost 900,000 files totaling just about 400 GB. It started the backup process at a rate of about 1 GB per minute. In a little less than an hour it reach 53 GB and remained there for an additional two hours before I decided to stop the backup. Â
Once I got the backup stopped, I deleted the backup and decided to look at my energy saving settings. I noticed that the "Put drives to sleep whenever possible" check box was checked, so I unchecked that option and restarted the MAC. I then initiated the time machine backup again. Like the first time it quickly determined that it needed to backup the same amount of data as before and started the backup process at a rate of about 1 GB per minute. Before going to bed at around 11 PM last night it was at about 60 GB so I thought I was out of the woods (having gotten further than the 53 GB earlier). When I woke up this morning at 5:30 AM it was sitting at 69 GB.Â
I am really frustrated at this point and don't know why the time machine back up would be failing on a brand new hard drive. PS - I was previously using a Seagate 1.5 TB USB drive as my time machine backup and never had any issues with it. I decided to use the 1.5 TB drive for a different purpose, which is why I have the new 3 TB drive to use as a backup. And I still have the full backup on the 1.5 TB drive just in case anything were to go awry.
I am getting the following error from Time Machine when doing my first backup. The startup disk being backed up, and the TM disk are both the same size.
Macintosh HD: 465.44 (total); 393.99 (free); 71.45 (free) Time Machine: 465.44 (total); 465.29 (free)
The Time Machine error is: Quote:
"This backup is too large for the backup volume. The backup requires 472.7 GB but only 465.3 GB are available." why would this be? Other disks are excluded from the backup, and Time Machine is telling me that it needs more space than it actually needs. What should I do?
I have a Macbook with an 80gb HDD, I want to put my leopard onto that external drive and then put that drive into my macbook. Is it possible to put a carbon copy of my original drive to my other one, only with more space.
Yesterday, I stuck the upgrade DVD in and started the upgrade. Half way through the process it rebooted. At this point a big warning sign came up saying there has been errors, please reboot (I haven't seen this again). The current situation is that the macbook (Black 250gb) boots for around 20 seconds (grey screen with apple and ajax style loader gif thing) before powering down. Attempted remedies and outcomes. I have reinserted snow leopard and leopard to check the disc utility. It tells me quite quickly that the disk needs repairing. On clicking repair, it tells me that it requires me to backup erase/install. I have attached the mac to a macbook pro (the one I'm writing on) using target mode. The host (this one) cannot see the disk in finder mode but can in disk utility. The hard drive of the target is grayed out and i cannot right click for further options (such as reveal).
I have tried starting in single user mode but I get the following message: Singleuser boot fsck not done. I have tried starting in verbose mode but i get an I/O disk error and then it turns itself off. I have tried to force mount the target in terminal but it says resource busy. I only have myself to blame as it is inexcusable not to backup prior to an upgrade. I'm just so used to mac products working perfectly. To make matters worse, the last backup was on a hard drive which i have just found out is also corrupt (and my itouch stopped working today too!). So basically I have no backup. To portray the gravity of the situation, the info on the computer is a 1.5 year project. that's basically over a 5th of my life that I may have to repeat! The problem (from reading) is that the file structure is messed up. I'm sure that my files are there, it's just I can't access them.
My question is simple. How can I find and copy files from the broken macbook to this new and working macbook pro.
I bought a new drive and need to get my Time Machine files off the old failed drive. I'm sure there are plenty of discussions about this but I can't find any. (I so dislike the new design for the support communities.)The old drive sometimes lets me access TM so I want to take advantage of one of those times to get everything across. I know it is a very slow process if it can be done
Info:Mac Mini 1.83ghz, Mac OS X (10.6.8), Great for a while.
My TM backup files are getting unnecessarily large so I would like to delete them and rescan my computer again. However, I don't want to risk deleting my TM backups and have the computer fail, so I wanted to copy the backups temporarily to a spare disk until the new backup had been completed successfully. So can the TM backups be moved just like any other file?
So I have a 15" MBP running Snow Leopard and have recently installed a Western Digital MyBook 1TB World Edition on the network to serve as my Time Machine backup drive. Most of the time, it works flawlessly and OSX / Time Machine does its thing and backs up.
Every once in a while, Time Machine says backup has been delayed because it cannot locate the network drive. This when I can easily access the network drive from other machines on the network, and also from my MBP in Finder. It's just Time Machine that somehow fails to find that drive. When I enter Time Machine preferences and look for the drive, it brings it up immediately and asks me for the username and pwd and viola ... it's up and running again.
I have a MBP 13" 2009, and had a HDD fail yesterday. I have an external HDD for backups with timemachine (WD 1Tb), with daily backups.I bought a new internal hdd, plugged it in today, and when presented with the install options, I selected recover from backup. There, my drive appears (in yellow), but when pressing continue, I get a message: No system backups found.
I looked around on forums and people suggested that a normal installation should be done followed by migration assistant. When I try using migration assistant and select Time Machine backup, the next page just shows up empty with a rotating thing in the middle.
When I browse the Backups.backupdb folder, everything is there, including my last backup from Saturday. I see that I can recover my files, which obviously is the most important bit, but I would like to restore Applications, settings etc, as to not waste too much time.Â
Is it possible to backup multiple computers to a single external drive connected to an Xserve using Time machine? We have a Six TB external drive that we are connecting to an Xserve that has three drives. We want to backup the entire
I was a PC user who recently moved to mac. I have a macbook (intel 2.2GHz, 2GB RAM, 250GB HDD). When I was using PC, I backed up all my data to a network storage device (Buffalo LinkStation 250 GB connected to a 802.11g netgear router which is supplied by Sky) using a program called SmartSync Pro, which worked very well. Although I can connect to and mount the Share folder on this drive when the macbook is connected to the network, Time Machine will not back up to it. It wouldnt even recognise the disk on the network.
So I went onto the trusty internet, and found that you can get time machine to recognise the Share folder. (This was obtained from: http://blog.imulus.com/george/software/using-leopard-time-machine-to-backup-of-a-network/)See my comment on their page at the bottom, number 66.
It recommended entering the following in to the Terminal: defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
Before attempting backup I have to go into "Network" and select the Share folder by double clicking on it. This seems to mount the volume. After this, it can be seen in Time Machine as a potential backup destination.
However, this method does not work for me. Time Machine "prepares" for a while, then gives the following message: Time Machine error. The backup disk image could not be created.
More internet searching took me to macosxhints which suggests creating something called a sparsebundle image on my local system. (http://www.macosxhints.com/article.php?story=20080420211034137) Have not tried this yet as I thought it would be prudent to seek some help first.
Apple have deliberately disabled the ability for Time Machine to back up to network attached storage, (except of course to their proprietory Time Capsule):
Is this because time machine requires a network faster than 802.11g?
Is this because a time machine backup to a network attached storage device is unreliable and the data is corrupted?
I dont want to shell out more cash for a time capsule. I would prefer not to have to hardwire to an external drive (which I will also have to go out and buy). Any thoughts?
When i try to backup data or transfer large amounts of data, like 40gb or more, between drives, the process just stops without warning or explanation. It dowsn't matter when backup i use, Time Machine or WD Smartware.
I have a external HD which has always worked fine under snow leopard. Since upgrading to lion I keep getting the following message The identity of the backup disk has changed since the previous backup.The disk may have been replaced or erased, or someone may be trying to trick your computer into backing up to the wrong disk. And after this the drive disappears from the desktop appearing agian only after restart. What can I do do rectify this? Delete and re-intialise the drive?
Just wanted to check if he problem was unique to my MBA (Rev B, HDD) or you notice it too ;
My Time Machine backup takes up to 6 hours to do a backup of about 30GB. And each backup size is 31.5GB everytime !!
I have the following Config - 80 GB for OSX (53GB Free) and 40 GB (10GB Free) for Win 7 on Bootcamp. Sometimes I wonder if TM making a backup of Win 7 also everytime. (Does it mean - In a way its good, that means I should be able to restore the entire hard disk from TM including Applications, Win 7 , bootcamp and all the programmes installed in Win 7 in case I have a problem ?)
But the speed should still be fast... 6 hours to do a 32GB backup is torturous specially because then I have to leave the machine alone and cannot use it.
I just replaced the stock 160GB HD in my unibody macbook with a WD Blue Scorpio 640GB HD. I used Super Duper to clone the old drive to the new one, approximately 115 GB.
Now Time Machine wants to backup the full 115GB to my Time Capsule, which kinda sucks because it's going to be a redundent backup that's gonna take up over a 10th of my TC's space. Is there any way to avoid this and still use Time Machine?
I have a 1tb external for time machine back up and have about 750 gb of stuff to back up. I was under the impression that when time machine backs up my stuff it will automatically delete the oldest backup to create room for the newer backup.
My problem is that i did a back up a couple weeks ago and then today i go to back up and it tells me back up failed only 718gb available for 740gb of stuff to back up
I just sold my iMac (described in sig) and need to backup my stuff to an external drive. What (free) program would allow me to backup my user name without having to manually drag everything over? Migration Assistant won't work as there will be a few days where I have no computer. Also I don't want to back up the OS itself; just my home folders (Pictures Music Movies etc.) and some applications.
Well TM is acting up. I get an error that reads: "This backup is too large for the backup volume."
Both the internal boot disk and the external baclup drive are 1TB. The internal one has a two partitions, the OSX one that is 900GBs and a 32GB NTFS one for Boot Camp. The external drive is a single OSX Extended part. that is 932GBs.
Both the Time Machine disk, and the Boot Camp disk are excluded from the backup along with a "Crap" folder for temporary large files.
Time Machine says it needs 938GBs to backup only the OSX disk, which has 806GBs in use with the rest free. WTFFF?
This happened after moving a large folder (128GB in total) from the root of the OSX disk over to my Home Folder.
I have reformated the Time Machine drive and have no backups at all of my data and it refuses to backup!!
Why would it need 938GBs of space to backup if the disk has "only" 806 GBs in use??? Is there anyway to reset Time Machine completely???
my TM wil not back up! It states that this backup is too large for the backup disk. The back up disk requires 573.50 GB but only 225.23 GB are available. The TM needs work space on the backup disk, in addition to the space required to store backups. Upen TM perferences to select a LARGER backup disk or make the backup smaller by excluding file.Â
Okay I;m sorry but obvioulsy I dont get this. I've never called Apple for help! I have every product they sell practically including Protection Plans I never used and no one will help me with this. My MAC is starting to have black or white screens and i can hear it running but it will not do anything so i have to reboot it, it screws up Enturage and then I have to rebuild that ( 5 times this year) anyway... I would like to back everything up- can I delete everything on the Time Capsule or Time Machine; god I dont even know what it is called Im so MAD... help if you can please. I'm going to have to take this to the genius people at the store and probably buy another computer but like before they will not save my files.
A: an old macbook (the white one) B: a modern macbook pro (retina) C: another modern macbook pro (TBD)Â
I am giving away B now; I expect to get C in 2 months time; I keep A with me all the time.
The goal is to migrate all of the data from B to C. I have Time Machine backups of B.
Since the transition is a long time (2 months), I need to keep working on my data during this period. For this I will use A. This will generate new files, modify old ones, ...
Since A's HDD is much smaller than B's backup, I can move only part of them.
By the way, I have totally erased A and used migration assistant to restore part of my old data from B. So, when I use A now, I do it with my same account as in B (and the same I will use in C).
How do I manage my backups in such a way that, when I will get C, I can safely move all of the data I had in B plus all of the changes and modifications that I have done during the 2 month transition?
Can I just continue to use Time Machine (on A) to update the old backups? I am afraid that some mess could be created because the computers are different (before the backups were taken on B, while now on A), even the present data are different (because now A only contains a subset of the original B data, which I do NOT want to lose), the good point is that the user is the same.
i back up about 725 gb if stuff and when i go to run my TM it tells me i only have 150 or so GB of space to back up the aforementioned 725gb.
Maybe i misunderstood TM, but cant i back up multiple days without using the same size of backup? i.e. i back up january 1st, december 1st and november 1st and it wont need 2.175 TB of space?
I have to change my Time Machine back-up unit with another one.Can anyone help? I have a partition on the first external hard drive, and I cannot change it.Is there a way to transfer the content of my "old" hard drive used for Time Machine on a new back-up unit?
