Is it possible to backup multiple computers to a single external drive connected to an Xserve using Time machine? We have a Six TB external drive that we are connecting to an Xserve that has three drives. We want to backup the entire
Info:
Xserve, Mac OS X (10.6.8)
I'd like to take one hard drive and back up 3 different Mac computers using Time Machine. The hard drive has the capacity greater than the 3 computers.
View 2 Replies View RelatedWe have a Macbook and an iMac, both on Snow Leopard. Set them up on TC for backup several months ago, and they worked for a while. Then it stopped working for no obvious reason, with the message:Â
The network backup disk could not be accessed because there was a problem with the network username or password. Open Time Machine preferences to select the network backup disck and re-enter the correct username and password.Â
Of course userame and password were correct, because, first of all, they had not been changed, and second, because I could put in the wrong pw and it immediately would reject it. As it is, it takes it, counts down for 120 seconds, and then gives the above message.Â
Bought a new Macbook Pro, using Lion, and it works with the TC, seemingly proving that all settings on the TC are still good. Tried resetting TC. Tried the Cmd-Alt-p-r reboot, but neither worked.
Info:
MacBook (13-inch Early 2008), Mac OS X (10.6.8)
First off, I have an iBook G4 with Leopard, and an iMac Intel that I just recently upgraded to Leopard. I have used my external drive to previously backup my iBook with Time Machine. I would like to start backing up my iMac too, with the same drive. Would this present a conflict as far as the multiple backups from different systems on the same drive? Obviuosly space would be an issue in the long run...250GB drive, devoted only to backups. Also, if/when I utilize Boot Camp on my iMac, will the Windows partition backup through Time Machine?
View 3 Replies View RelatedCan I do a backup using Time Machine on a server, or it needs an external drive only?
Info:Mac OS X (10.6.8)
I have two computers...an iMac and a macbook. Can I use my single Time Capsule to back up both computers?
Info:MacBook, Mac OS X (10.5.8)
I have Time Machine backing up my MacMini Snow Leopard Server to an external harddrive.  When the backup runs, it never completes, but it also does not throw an error message. It just gets stuck around 300MB or so and eventually starts over. As you can see it does not seem to backup everything. I have tried using TimeTracker to see what it might be getting stuck on but I can't really make heads or tails of it. I have even removed the old backup and started a new one. It backs up once fully (I think) and then after that it just gets stuck like this.Â
I should mention the drive it backs up is two separate partitions SnowLeopard Server Volume and PrimeRoot Volume, both of which need to be backuped. I was thinking maybe a permissions issue? But I just don't know where to look.
Info:
Mac mini, Mac OS X (10.6.8)
The OS X 10.6.x Server running Time machine, it runs daily backup to external HD, it is fine, but for couple of days, it failed, is there any logs or message that I can read what is going on? The external HD connected with firewire 800 and it still have enough space, so I think it is not a space problem
Info:Mac mini, Mac OS X (10.6)
I bought a new drive and need to get my Time Machine files off the old failed drive. I'm sure there are plenty of discussions about this but I can't find any. (I so dislike the new design for the support communities.)The old drive sometimes lets me access TM so I want to take advantage of one of those times to get everything across. I know it is a very slow process if it can be done
Info:Mac Mini 1.83ghz, Mac OS X (10.6.8), Great for a while.
So I have a 15" MBP running Snow Leopard and have recently installed a Western Digital MyBook 1TB World Edition on the network to serve as my Time Machine backup drive. Most of the time, it works flawlessly and OSX / Time Machine does its thing and backs up.
Every once in a while, Time Machine says backup has been delayed because it cannot locate the network drive. This when I can easily access the network drive from other machines on the network, and also from my MBP in Finder. It's just Time Machine that somehow fails to find that drive. When I enter Time Machine preferences and look for the drive, it brings it up immediately and asks me for the username and pwd and viola ... it's up and running again.
I have a MBP 13" 2009, and had a HDD fail yesterday. I have an external HDD for backups with timemachine (WD 1Tb), with daily backups.I bought a new internal hdd, plugged it in today, and when presented with the install options, I selected recover from backup. There, my drive appears (in yellow), but when pressing continue, I get a message: No system backups found.
I looked around on forums and people suggested that a normal installation should be done followed by migration assistant. When I try using migration assistant and select Time Machine backup, the next page just shows up empty with a rotating thing in the middle.
When I browse the Backups.backupdb folder, everything is there, including my last backup from Saturday. I see that I can recover my files, which obviously is the most important bit, but I would like to restore Applications, settings etc, as to not waste too much time.Â
Info:
MacBook Pro, Mac OS X (10.6.8)
I am using time machine to back up to a time capsule, two different macs (a laptop & a desktop). The time casule is connected to the network & the desktop backs up fine. The laptop did as well up until a few months ago, now the laptop fails each attempt to back up.Â
The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk. Â
Latest successful backup: 11/16/11 at 10:24 PMÂ
I have tried to repair the laptop backup volume with no change. I do not really want to reformat the entire disk as it is working fine with the desktop.Â
I am trying to restore A single file from time machine to a new drive, I know how to restore the file so it gose to my mac but I can't make it restore to my new hard disk " Why would you need to do that I hear you Ask "GOOD QUESTION" well it would take about 7 hour to copy the file to my mac and the another 7 hour to copy the file to the hard drive (which is where I need it to be).what I want to do is save 7 of the 14 Hours it will take by directly restoring the files (of which I have a few) to the new hard drive?I am working with OSX10.5.8?
Info:
PowerMac
I just purchased a Seagate 3 TB USB 2.0/3.0 external drive to use as my time machine backup drive. I have a MacBook Pro that was purchased about 3-4 years ago. The MacBook Pro has a 120 GB hard drive and is currently running MAC OSx 10.6.8. I also have another WD 1 TB FireWire external drive that I use to store all of my media files. Â
After I followed the instructions for installing the new Seagate drive for use with the MAC OSx, I initiated a time machine backup. It very quickly determined that it needed to back up almost 900,000 files totaling just about 400 GB. It started the backup process at a rate of about 1 GB per minute. In a little less than an hour it reach 53 GB and remained there for an additional two hours before I decided to stop the backup. Â
Once I got the backup stopped, I deleted the backup and decided to look at my energy saving settings. I noticed that the "Put drives to sleep whenever possible" check box was checked, so I unchecked that option and restarted the MAC. I then initiated the time machine backup again. Like the first time it quickly determined that it needed to backup the same amount of data as before and started the backup process at a rate of about 1 GB per minute. Before going to bed at around 11 PM last night it was at about 60 GB so I thought I was out of the woods (having gotten further than the 53 GB earlier). When I woke up this morning at 5:30 AM it was sitting at 69 GB.Â
I am really frustrated at this point and don't know why the time machine back up would be failing on a brand new hard drive. PS - I was previously using a Seagate 1.5 TB USB drive as my time machine backup and never had any issues with it. I decided to use the 1.5 TB drive for a different purpose, which is why I have the new 3 TB drive to use as a backup. And I still have the full backup on the 1.5 TB drive just in case anything were to go awry.
Info:
MacBook Pro, Mac OS X (10.6.8)
I have set up an automator service that TAR's a folder into an archive for me and it works quite nicely. Idealy however, I would like to be able to highlight several folders, right click and have automator tar each folder into it's own TAR archive, but do it one by one. Â
[Code]...
I'm not 100% sure so I guess it would be a good time to verify, is there a problem with having the system try to TAR multiple folders at one time? If it is not a problem then I guess this discussion itself is pointless and I can simple right click on each folder and select "TAR Folder" and just wait until they're all finished. I would think that it would be ideal for the system to do each one individually and not try to do them all at one time.Â
I have 2 Macs in the house, with a 3rd coming soon. I backup mine to an external hard drive using Time Machine, but neither of the others have a backup plan in place.
One user doesn't really need a robust backup solution, but the person getting a mac soon does.
I was thinking I could kill two birds with one stone if I got a Time Capsule. Now I've read all about how you can partition Time Capsule and stuff like that (and I'm technical enough that I could probably pull that off if I wanted to, but I don't think I do). What I haven't found out is what the Time Capsule does if two users have been syncing to it, and on the next backup it runs out of space.
I have to change my Time Machine back-up unit with another one.Can anyone help? I have a partition on the first external hard drive, and I cannot change it.Is there a way to transfer the content of my "old" hard drive used for Time Machine on a new back-up unit?
View 2 Replies View Relatedpossible to back up all your data with Time Machine on Leopard and then install Snow Leopard and use Time Machine to restore all of your pictures/movies/music and the like?
I'm going to assume it's a no go since Time Machine is capable of a full system backup -- it may just turn your system back into Leopard?
I have a Apple Time Capsule which is used as a Time Machine Backup Facility and also a Wireless Hub for File Sharing and Internet Connection. I've been using Leopard for a couple of years without any significant problems. The other day, I installed Snow Leopard and suddenly, I'm facing a number of different problems and errors regarding backups to the Time Machine with the Time Capsule.
First, I was facing problems with a Case Sensitive error and now that I have ejected the Time Capsule, the Disk Utility has come up with a different name altogether and now I have the added problem of disk space on the time capsule. I know I could re-format and start over but that would defeat the whole point of my backups. The Time Machine/Capsule should re-write over the old backups when making space for new ones but its just giving me an error about not enough disk space.
I had to have the old hard drive replaced on my macbook pro running Snow Leopard 10.6.8 operating system. It was replaced at the apple store. I brought it home and yesterday restored it from the last time machine backup of my old hard drive which was Friday. That appears to be the only backup on the external hard drive I've been using with Time machine.
Today, it gets an error message. "Time Machine could not complete the backup. This backup is too large for the backup disk"...etc.
It is almost like it is trying to completely back up the new hard drive even though it was just restored from it. Is it because it thinks it is a different drive or something because it is a new hard drive? I don't want to delete the one good backup that I have but, I want to be able to use time machine to back anything up.
I would like to always have one external hard drive attached to my iMac for Time Machine backups, and another external hard drive off site - periodically swapping the two. The though is that if there is fire or theft, it won't help to have a hard drive onsite attached to the computer, because both the iMac and the hard drive could be lost. Is Time Machine smart enough to allow me to configure two drives, so that whenever I plug in one of the drives, it can figure out what needs to be backed up?
Info:
27' iMac i7 Quad-Core, Mac OS X (10.6.2)
So finally I hooked up an external HD to my iMac 24 to use with Time Machine. My internal drive is partitioned into several sections and the system partition of about 80GB is supposed to be backed up to this eternal drive which is a 500GB, freshly formatted. Setup is easy enough. After Time Machine starts backing up it goes to about 100MB then it stalls. Essentially it keeps running, the turning clock symbol in the menubar is spinning but no data is moved.
At this point I can stop back up and then do click 'Back Up Now' in the menu at which time it will copy a few kb's and then halt displaying '2KB of 60.96GB'. I realize that there must be something on my HD it doesn't like to copy but unlike in my other backup app I don't know how to find that. The Console doesn't tell me much. I have done repeated Repair Permissions but it doesn't help.
I just got a new 1tb sata 2.5in and I want to install it, but I do not have my snow leopard disk. If I use a leapord disk will it reinstall snow leapord from my time machine backup or do I need to find my snowleapord disk?
View 1 Replies View RelatedIf I use Time Machine to back up automatically to an external hard drive, but want to keep large files only on the external hard drive, will I lose the files once deleted off the computer (i.e. will Time Machine synchronize, or just save new files?)
Info:
MacBook Pro, Mac OS X (10.6.8)
I am running 10.6.8 on my MacPro (early 2008). I have 4 internal hard drives. The main boot drive has 10.6.8 and the secondary drive with a system has Lion. I cannot completely upgrade to Lion on my main drive until all my software is compatible. My main boot drive started acting like it's in slow motion 2 days ago. No matter what I do (DiskWarrior, Disk Utility, zap PRAM, fix permissions) nothing seems to work. Every mouse click or movement gives me the dreaded spinning wheel and it hangs for about 5 min and then does what it's supposed to do.
I have logged into a new account w/ no special 3rd party apps or utilities and it still does the same thing. Hard drive diagnostics say my hard drive is ok. I have tried reinstalling the 10.6.8 combo update but that hangs after a few minutes of starting. I thought about restoring a Time Machine backup from 1 day before this happened, but before I attempt a full disk backup, need to ask what to do so as not lose everything. I assume I must boot up from another disk or hard drive, correct? Can I simply select all the system folders and apps folder or do you think I should do a complete restore?
Info:
Mac Pro (Early 2008), Mac OS X (10.6.8)
I do not like OS X Lion on my Macbook Pro as I'm about to downgrade back to Snow Leopard. I do have a Time Machine backup with OS X 10.7. Will Snow Leopard read the newer Time Machine Backup? I just need my documents and pictures.. or would I need to back all that up as well?Â
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.3)
I have moved a network time machine backup disk to a new computer. Now when the time machine starts a backup it produces an error message: "Time machine could not complete the backup. An error occured while creating the backup folder."
Info:
Mac mini, Mac OS X (10.6.8)
OK, this questions isn't what you're thinking. I know that Time Machine will not work with and AirDisk as the backup drive. What I'm wanting to do is the opposite. I have an AirDisk connected to my AEBS that has my iPhoto and iTunes libraries on it so that they can be accessed from multiple computers. I've already got an offsite backup setup, but I want to back up the AirDisk to Time Machine also. That way if the drive goes bad it would be much quicker to restore than from an offsite source.
View 5 Replies View RelatedRenaming my hard drive caused Time Machine to make a new 190 GB backup. How can I delete this single backup to get the space back and still keep the previous and following backups? I tried deleting the single backup for whole hard drive in the Time Machine UI, but I didn't get any the space back, the next newest backup is now 190 GB using Time Tracker as seen below. Just tried deleting all the backups of the renamed hard drive from 3 Oct and now the first backup of today is 191 GB.
View 6 Replies View RelatedWhere can I find the license agreement that states whether or not I'm able to install Snow Leopard on multiple computers?
Info:Mac OS X (10.6.2)
