OS X V10.6 Snow Leopard :: Attach Backup And Cd Drive At Same Time?
May 26, 2012how do i attach the backup drive and the cd drive at the same time? - I only have one usb on this Mac Air.
Info:MacBook Air, Mac OS X (10.6)
how do i attach the backup drive and the cd drive at the same time? - I only have one usb on this Mac Air.
Info:MacBook Air, Mac OS X (10.6)
I bought a new drive and need to get my Time Machine files off the old failed drive. I'm sure there are plenty of discussions about this but I can't find any. (I so dislike the new design for the support communities.)The old drive sometimes lets me access TM so I want to take advantage of one of those times to get everything across. I know it is a very slow process if it can be done
Info:Mac Mini 1.83ghz, Mac OS X (10.6.8), Great for a while.
So I have a 15" MBP running Snow Leopard and have recently installed a Western Digital MyBook 1TB World Edition on the network to serve as my Time Machine backup drive. Most of the time, it works flawlessly and OSX / Time Machine does its thing and backs up.
Every once in a while, Time Machine says backup has been delayed because it cannot locate the network drive. This when I can easily access the network drive from other machines on the network, and also from my MBP in Finder. It's just Time Machine that somehow fails to find that drive. When I enter Time Machine preferences and look for the drive, it brings it up immediately and asks me for the username and pwd and viola ... it's up and running again.
I have a MBP 13" 2009, and had a HDD fail yesterday. I have an external HDD for backups with timemachine (WD 1Tb), with daily backups.I bought a new internal hdd, plugged it in today, and when presented with the install options, I selected recover from backup. There, my drive appears (in yellow), but when pressing continue, I get a message: No system backups found.
I looked around on forums and people suggested that a normal installation should be done followed by migration assistant. When I try using migration assistant and select Time Machine backup, the next page just shows up empty with a rotating thing in the middle.
When I browse the Backups.backupdb folder, everything is there, including my last backup from Saturday. I see that I can recover my files, which obviously is the most important bit, but I would like to restore Applications, settings etc, as to not waste too much time.Â
Info:
MacBook Pro, Mac OS X (10.6.8)
Is it possible to backup multiple computers to a single external drive connected to an Xserve using Time machine? We have a Six TB external drive that we are connecting to an Xserve that has three drives. We want to backup the entire
Info:
Xserve, Mac OS X (10.6.8)
I just purchased a Seagate 3 TB USB 2.0/3.0 external drive to use as my time machine backup drive. I have a MacBook Pro that was purchased about 3-4 years ago. The MacBook Pro has a 120 GB hard drive and is currently running MAC OSx 10.6.8. I also have another WD 1 TB FireWire external drive that I use to store all of my media files. Â
After I followed the instructions for installing the new Seagate drive for use with the MAC OSx, I initiated a time machine backup. It very quickly determined that it needed to back up almost 900,000 files totaling just about 400 GB. It started the backup process at a rate of about 1 GB per minute. In a little less than an hour it reach 53 GB and remained there for an additional two hours before I decided to stop the backup. Â
Once I got the backup stopped, I deleted the backup and decided to look at my energy saving settings. I noticed that the "Put drives to sleep whenever possible" check box was checked, so I unchecked that option and restarted the MAC. I then initiated the time machine backup again. Like the first time it quickly determined that it needed to backup the same amount of data as before and started the backup process at a rate of about 1 GB per minute. Before going to bed at around 11 PM last night it was at about 60 GB so I thought I was out of the woods (having gotten further than the 53 GB earlier). When I woke up this morning at 5:30 AM it was sitting at 69 GB.Â
I am really frustrated at this point and don't know why the time machine back up would be failing on a brand new hard drive. PS - I was previously using a Seagate 1.5 TB USB drive as my time machine backup and never had any issues with it. I decided to use the 1.5 TB drive for a different purpose, which is why I have the new 3 TB drive to use as a backup. And I still have the full backup on the 1.5 TB drive just in case anything were to go awry.
Info:
MacBook Pro, Mac OS X (10.6.8)
I have to change my Time Machine back-up unit with another one.Can anyone help? I have a partition on the first external hard drive, and I cannot change it.Is there a way to transfer the content of my "old" hard drive used for Time Machine on a new back-up unit?
View 2 Replies View Relatedpossible to back up all your data with Time Machine on Leopard and then install Snow Leopard and use Time Machine to restore all of your pictures/movies/music and the like?
I'm going to assume it's a no go since Time Machine is capable of a full system backup -- it may just turn your system back into Leopard?
I have a Apple Time Capsule which is used as a Time Machine Backup Facility and also a Wireless Hub for File Sharing and Internet Connection. I've been using Leopard for a couple of years without any significant problems. The other day, I installed Snow Leopard and suddenly, I'm facing a number of different problems and errors regarding backups to the Time Machine with the Time Capsule.
First, I was facing problems with a Case Sensitive error and now that I have ejected the Time Capsule, the Disk Utility has come up with a different name altogether and now I have the added problem of disk space on the time capsule. I know I could re-format and start over but that would defeat the whole point of my backups. The Time Machine/Capsule should re-write over the old backups when making space for new ones but its just giving me an error about not enough disk space.
I had to have the old hard drive replaced on my macbook pro running Snow Leopard 10.6.8 operating system. It was replaced at the apple store. I brought it home and yesterday restored it from the last time machine backup of my old hard drive which was Friday. That appears to be the only backup on the external hard drive I've been using with Time machine.
Today, it gets an error message. "Time Machine could not complete the backup. This backup is too large for the backup disk"...etc.
It is almost like it is trying to completely back up the new hard drive even though it was just restored from it. Is it because it thinks it is a different drive or something because it is a new hard drive? I don't want to delete the one good backup that I have but, I want to be able to use time machine to back anything up.
So finally I hooked up an external HD to my iMac 24 to use with Time Machine. My internal drive is partitioned into several sections and the system partition of about 80GB is supposed to be backed up to this eternal drive which is a 500GB, freshly formatted. Setup is easy enough. After Time Machine starts backing up it goes to about 100MB then it stalls. Essentially it keeps running, the turning clock symbol in the menubar is spinning but no data is moved.
At this point I can stop back up and then do click 'Back Up Now' in the menu at which time it will copy a few kb's and then halt displaying '2KB of 60.96GB'. I realize that there must be something on my HD it doesn't like to copy but unlike in my other backup app I don't know how to find that. The Console doesn't tell me much. I have done repeated Repair Permissions but it doesn't help.
I just got a new 1tb sata 2.5in and I want to install it, but I do not have my snow leopard disk. If I use a leapord disk will it reinstall snow leapord from my time machine backup or do I need to find my snowleapord disk?
View 1 Replies View RelatedIf I use Time Machine to back up automatically to an external hard drive, but want to keep large files only on the external hard drive, will I lose the files once deleted off the computer (i.e. will Time Machine synchronize, or just save new files?)
Info:
MacBook Pro, Mac OS X (10.6.8)
I am running 10.6.8 on my MacPro (early 2008). I have 4 internal hard drives. The main boot drive has 10.6.8 and the secondary drive with a system has Lion. I cannot completely upgrade to Lion on my main drive until all my software is compatible. My main boot drive started acting like it's in slow motion 2 days ago. No matter what I do (DiskWarrior, Disk Utility, zap PRAM, fix permissions) nothing seems to work. Every mouse click or movement gives me the dreaded spinning wheel and it hangs for about 5 min and then does what it's supposed to do.
I have logged into a new account w/ no special 3rd party apps or utilities and it still does the same thing. Hard drive diagnostics say my hard drive is ok. I have tried reinstalling the 10.6.8 combo update but that hangs after a few minutes of starting. I thought about restoring a Time Machine backup from 1 day before this happened, but before I attempt a full disk backup, need to ask what to do so as not lose everything. I assume I must boot up from another disk or hard drive, correct? Can I simply select all the system folders and apps folder or do you think I should do a complete restore?
Info:
Mac Pro (Early 2008), Mac OS X (10.6.8)
Can I do a backup using Time Machine on a server, or it needs an external drive only?
Info:Mac OS X (10.6.8)
I do not like OS X Lion on my Macbook Pro as I'm about to downgrade back to Snow Leopard. I do have a Time Machine backup with OS X 10.7. Will Snow Leopard read the newer Time Machine Backup? I just need my documents and pictures.. or would I need to back all that up as well?Â
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.3)
I have moved a network time machine backup disk to a new computer. Now when the time machine starts a backup it produces an error message: "Time machine could not complete the backup. An error occured while creating the backup folder."
Info:
Mac mini, Mac OS X (10.6.8)
OK, this questions isn't what you're thinking. I know that Time Machine will not work with and AirDisk as the backup drive. What I'm wanting to do is the opposite. I have an AirDisk connected to my AEBS that has my iPhoto and iTunes libraries on it so that they can be accessed from multiple computers. I've already got an offsite backup setup, but I want to back up the AirDisk to Time Machine also. That way if the drive goes bad it would be much quicker to restore than from an offsite source.
View 5 Replies View RelatedUpdate: "Magically," the backup is working over AirPort Disk. I'll chalk it up to a Snow Leopard ghost. I have been backing up to a WD My Book 1TB drive connected to my Airport Extreme router without any problems. Yesterday I upgraded to 10.6 (installed over 10.5.8, not a clean install) and have been having problems with Time Machine since. After the OS finished installing, I attempted to perform a wireless backup. Everything mounted properly, and it began a 10GB backup. When it got to around 5.8GB, Time Machine came up with a network error message (not sure which one exactly) and stopped the backup.
At this point I just connected the drive directly to my computer to perform the backup, and it did so without any hiccups. But now I can't even connect to the AirPort disk, let alone try to backup to it. Time Machine says it's not configured, and when I try to browse for my Time Machine Backup Disk it won't let me select it, even though the drive shows up in AirPort Utility. I've enclosed a screenshot of what I'm seeing. Does anyone have any tips to help me get this mounted and working again? This is not turning out to be as painfree an update as advertised.
My Macbook has not been running very stable and I decided to restore from a backup via Time Machine. My problem is my install disks are Leopard (10.5) and my backups are from Snow Leopard (10.6). I installed Snow Leopard from an Upgrade disk which I don't still have.
I have no luck restoring the Snow Leopard backups. My question is, how would I recover these backups without the Snow Leopard install disk? Is it possible or do I need to do a fresh install, upgrade then enter time machine via the OS itself?
Recently my Time Machine backup have started stalling part way. I've tried deleting the .inProgress file several time but the same results happens. The backup get stuck part ways. I have search the forums but found not much information.
View 1 Replies View RelatedJust receovered from a disk crash. TM brings everything back on my new HD. The problem is that when I try to backup again, I get an error message saying to check TM's preferences. One problem may be that it seems that TM wants to back up the full HD rather than doing an incremental one.
Info:
MacBook Pro, Mac OS X (10.6.8), 2.53 GHz, i5, 8GB, 500 GB
I need to do a complete restore of my MacBook from a previous time. Now, I back up my wife's MacBook and mine to the same external hard drive using Time Machine on a regular basis and if I open TM on my MacBook I can see all my backups in the 'time travel' view. As well, if I do a Finder search in my external hard drive, all the backup files are there, both my wife's and mine in two separate folders.
The problem comes when I try to restore, using my Install DVD. At the point that it asks me where the backup is stored, I click on my external hard drive and it shows my wife's and my backups as options. All my wife's backups appear when I select hers. But only my original backup appears when I select mine. It doesn't recognise all my subsequent backups. I've tried deleting my wife's backup folder but still only see my original backup.
I interrupted my initial Time Machine backup. How do I reinstate the initial backup?
Info:
Time Machine
Lately it seems that Time Machine has been underestimating the size of each backup. What it originally says to be a 10 MB backup turns out to be several GB. As it's backing up, Time Machine will say "X out of 10MB backed up" or something along those lines, but when X reaches 10MB, X continues to grow and so does the original estimate of 10MB. It might then say "13MB of 13MB backed up" and it will continue on this way until it has backed up so much underestimated data that Time Machine tells me it can't finish the backup because it doesn't have enough space on the backup drive. (Time Machine should've deleted some backups beforehand to make space for the new backup, but it didn't know to because it had underestimated the amount of space necessary for the backup.)Â Â
I have already wiped the backup drive and deleted all the Time Machine preference files, only to still face the same problem. I'm backing up my internal 1TB drive (only 300 GB used) and my 500GB external drive (400GB used) to another 1TB external drive, so having enough space on the backup drive shouldn't be the problem, right? BTW, I'm running Snow Leopard.
Info:
iMac, Mac OS X (10.6.8)
I want to backup my system on a local internal drive and a network drive, is this possible with time machine? I want it local but also available on the nextwork incase something happens to my computer (thieft, natural disaster, user stupidity) so I can always have my files.Â
Is it possible to have time machine select two disks instead of only having one? If not is there another program that can do this? I don't want to manually copy the file to the server as I would just forget. Automation is the only way it will ever happen.Â
Info:
2x2.8 GHz Quad-Core Intel Xeon, Mac OS X (10.5.5), 6GB of Ram ATI 2600
I'd like to keep one backup of a particularly large file in Time Machine, but all the incremental backups are taking up a ton of room. I've read how you can delete all backups of one file, and all files in one backup. But can you delete one file in one backup?
View 4 Replies View RelatedI have a Time Machine Backup that I created in Lion 10.7 and I need to know if this will allow me to install it from 10.6.My HD is on its way out and I need a replacement. I will first install 10.6 onto the new drive (as this is the disk that came with my Mac) and from there, I want to install my Time Machine backup.
Info:
Mac Mini (Early 2009)/MacBook (Late 2008)Mac Mini (2010), Mac OS X (10.6.7), LED Cinema Display
I have just upgraded my system mac book pro from 10.6.8 to 10.7.....but it become slow and graphic problem also....can any one suggest how do i downgrade my system back to 10.6.8...I do have Time Machine backup for 10.6.8 working time a day ago..
Info:MacBookPro, Mac OS X (10.7)
I have a Mac Pro with Snow Leopard (10.6.8) with three internal hard drives. I'm using one of these hard drives for backup (not the best set up, as I would prefer something external, but hey, better than nothing). So I created a sparsebundle on one of my 1 TB drives with a max size of 700 GB, following the directions here: [URL]..(except that mine is not a network drive). But now I am faced with two problems: (1) Time Machine does not back up unless I manually tell it to. (2) Time Machine only keeps the most recent backup. It no longer keeps incremental backups, now that I'm using a sparsebundle. Prior to using a sparsebundle, neither of these problems occurred. Is this normal? Has anybody else had this issue, and how do I resolve it?
Info:
Mac Pro, Mac OS X (10.6.8)