i have a linksys wireleess connection upstairs in my house and i would like to buy an airport express base station in my room becuase recpetion is shotty at times... I would like to know how and can i bridge connections with an Airport express base station.
View 5 RepliesCould I upgrade my late 2011 MBP from its Sandy Bridge i5 to the newer Ivy Bridge i5 when it is released?
Info:MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
Here's my goal: simply to share my MBPs wireless connection to my Xbox over ethernet. Sounds simple enough and I know it should be possible but it isn't working. I have internet sharing on to go from the airport to ethernet but when I try to connect the xbox it can't even find a network or get an IP address. I would assume I just need to get my computer to act as a host of some kind and assign it an IP address, but I can't figure out how to get it to do that.
View 4 Replies View Relatedi've got a service/application in my security (firewall) panel set for "Allow incoming connections" and "Automatically allow signed software to receive incoming connections" checked on.Yet it asks me for permission to "allow or deny" for incoming connections every time i start up my Mac.
View 1 Replies View RelatedThis is a technical question out of pure curiosity. I could probably dig through the documentation, but that would probably take longer than my curiosity would hold out, so I figured "why not ask?"
I occasionally switch between wireless (g) and wired (gigabit) networking with my home laptop on occasions when I want the extra speed for accessing large files. I'd noted before that this was pretty transparent, but for the heck of it I did a test today:
Connected to my home server (10.4's built-in AFP sharing, gigabit to a new Airport hub) using wireless, and started playing a medium-bandwidth (1.5Mbit/s) video file. With it playing, I connected the hardwired Ethernet, waited a bit for it to get an IP address, then tuned off the Airport card. I was honestly surprised that the video didn't even stop playing (and not due to caching), so obviously the transition was transparent enough to the app that it didn't stall out long enough to mess up the video. Switching back worked as well--in fact, I could tell it was changing, because via wireless there were slight glitches in playback, I'm assuming due to the way the player (mis-)handled preloading on a relatively slow connection.
Which got me wondering: How exactly does OSX prioritize network traffic when there are two available paths? All to the faster one, some connections prioritized over others based on hardware, or does it spread traffic around?
Also, given two alternate paths to the internet, what kind (if any) of load-sharing will the OS do by default? I'd always assumed that you'd need a special router to combine two separate internet connections (say, cable and DSL), but this got me wondering if OSX (given two network paths) would do some of this load-sharing by itself. I of course don't have two internet connections in the same place to try this with.
I have an Early 2008 White MacBook. Recently I have been having problems acquiring wifi signals with it. My iPhone, othere peoples' phones, my sister's computer and everything else can get wifi in my room, but my MacBook has not been able to "see" the connections for the past few days. I am tethering my iPhone 3G right now and it's killing my data plan, I have used 3 GBs in 2 days (I have 6 GBs on my data plan)
View 10 Replies View RelatedIs anyone else having problems with SL dropping your wireless connections. I've never had any problems with Leopard and my home wireless network but SL has dropped my connection numerous times since I did my install. The only way to recover seems to be to reboot my computer.
View 3 Replies View RelatedI'm new here but have lurked for a while and love the community. Hope someone can shed some light on this. I've got a Mac Pro with iVPN installed (which allows you to use the VPN server built into each copy of Snow Leopard). I've got it working perfectly on my Mac Pro - but my friends Mac Pro is having problems.
I absolutely know I have the shared secret, username, and password correct. The shared secret must be correct because when I change it - it times out. However, when I go to connect to the VPN from either an iPhone or another Snow Leopard Mac, it throws an error than the password isn't correct. Obviously I've tested this multiple times with multiple passwords. See the log below.
The Mac Pro is NOT running Snow Leopard Server - just regular Snow Leopard (which can run a VPN server all the same).
Not sure if this is the right place but I have my Humax HDR T2(a pvr) connected to my macbook via ethernet as my laptop is next to my tv and thats not on the same floor as the router. Before I got the wireless adapter for my xbox I was doing the same setup and using my macbook as a bridge which worked well but the T2 is saying network disconnected. It is showing up all the settings from the network apart from gateway address. On my mac its saying the "ethernet has a self assigned IP so an internet connection will not be possible".
View 1 Replies View RelatedFudzilla reports that Intel has confirmed that Intel 6 chipset will natively support USB 3.0. Yes, both, mobile and desktop chipsets. Still unsure whether all chipsets or just some of them will support USB 3.0.
I would like to add that it's not 100% sure since Fudzilla didn't show any concrete evidence but they usually know their stuff. At least we have hope now
Does anyone know the status on "Sandy Bridge" with regards to it being utilized in future Mac Pro's? I ask as I just sold my 2008 2.8 8 Core and am considering a 2010 8 Core Westmere. However I can live without a system, so if in 5-6 months Sandy Bridge appears in the Mac Pro, and it's worth the wait, I'm for it.
View 22 Replies View RelatedI am waiting for next iMac generation and not beacause I am playing waiting game - just can't afford one at the moment.
I am browsing this and few others forums to find an answer what we will see in next generation iMacs and I can see that most probably it would be Sandy Bridge CPUs.
Could someone exaplain me what is Sandy Bridge? What will be difference between it and current technology from normal end user perspective
here is a link to apple insider about sandy bridge
[URL]
seems they may be ahead of schedule
So I've seen way to many "should I upgrade now or wait" threads, but I've been out of the tech "loop" for a while, and I would just like to ask weather its worth it to wait for the new mbp if it has sandybridge with it.
So I will be going to college soon, and I'm going to be taking some film courses, and I do photoshop work and premier work with a bit of after effects. Would anyone be able to tell me weather the sandy bridge will be able to handle this better than the current cpu's or are the current cpu's going to preform better? I can wait if I have to for the new ones, but I'm currently on a $300 netbook right now, I just sold my i7 gaming/media windows computer for money to buy my macbook. I'm switching to mac for good, I'm getting sick with windows.
I'm going to wait for the 2011 mbp announcement before I make any final decisions though. I don't want to buy a current mbp if the 2011's have some crazy good upgrade and I miss out.
Does anyone know if the 3870 comes with a crossfire bridge? And if it doesn't the pc version has one so why wouldnt the mac and pc one not have one?
View 6 Replies View RelatedCan anyone who is using this card let me know if they have had issues with CS4. I'm trying to determine if this related to the video card.
Problem: When I try to view a slide show or do a full screen view all I get is a grey screen, pictures do not display. The Radeon HD3870 Mac & PC edition meets Adobe's specs for Photoshop and Bridge CS4. Adobe has tested the 3870 with Windows but not with OS X.
Adobe's documentation lists Bridges GPU functions as
Preview Panel
Full-screen preview
Slideshow
Review Mode
Only the Preview Panel is working correctly.
Here are my system specs:
MacPro 2 dual-core processors 2.66 GHz
5 GB of certified memory
ATI Radeon HD 3870 Mac and Windows edition
the vidio card has 512 MB of VRAM
I'm running OS X 10.5.5
The driver that is installed is the original from the disk. I could not find an updated driver on ATI's site or Apples site.
My system info shows two listings for the HD 3870, both in slot 1. The first has display for type and yes for driver installed. The second lists ATY, MegaledonParent as type and no for driver installed.
Hi. Looking for some advice on whether to purchase an Airport Express or an AEBS for bridging Wireless-N in my apartment.
Currently I run a Mac Pro via gigabit ethernet to a D-Link DGL-4300 wireless-G router. My Powerbook is wireless-G and connects wirelessly. I also have an ipod Touch which is obviously G. I just recently purchased an AppleTV to get some HD and iTunes streaming in the bedroom, so the AppleTV is not located near the D-Link where I could connect it via ethernet.
So I need Wireless-N in order to stream content to the AppleTV. I also need to maintain a wireless-G network for both the Powerbook and the iPod Touch.
I was considering buying a new router that did simultaneous G and N but it would be an awful waste of what's otherwise a great existing G router.
So my question is, should I get an Airport Express and run it in Bridge mode to provide wireless-N connectivity to the AppleTV and any other follow-on N products I may purchase, or should I go with the AEBS which would come with a USB port for an external hard drive?
I have two different broadband connections at home on two separate phone lines.
Each broadband connection has it's own Wireless Router (1 has a Belkin 54g the other is an Orange Livebox). I also have an Apple Airport Express which is doing nothing at the minute.
What I'd like to do is set up the two networks to be linked i.e. the MacPro on Connection 1 will be able to see the other Macs on Connection 2 and file share the video's/music etc etc...
How would I go about setting this up?
MBP and cinema and CS4 bridge will not work.I have tried everthing, it just hangs up on my cinema display.every other program works on it.
View 2 Replies View RelatedMy Mac and modem had easy passwords and I noticed someone connected to me in the attached servers list. At one point my wifes PC announced that the modem had no password. I checked my firewall that was not on and allowıng all connections. Need help as I do banking online etc and did turn on Console logs but to be honest I dont understand it all and only turned it on when I thought I had a problem.
View 14 Replies View RelatedThe Mac Pro people seem to have trouble with their computers hooked up to monitors using a MiniDisplayPort to DisplayPort connection. There might be issues both with cables and adapters:
[URL]
I'm trying to figure out if it's a problem specific to the Mac Pro video card or if it's a general issue that affects MacBook Air users as well. If you're connecting your MacBook Air to a monitor using a MiniDisplayPort to DisplayPort connection, could you please post which adapter+cable or cable (brands, links if possible) you are using with which monitor?
I seem to be having an issue figuring out what kind of connection this is on my Mac, it has a video symbol on it but I bought what I thought was the right cable which was the mini DP to HDMI but its not the right connector.
View 1 Replies View RelatedSafari won't let me log into paypal or mobileme (gives an error msg. about "secure connections"), Apple Mail isn't working, and a message has been popping up and telling me that my IP address on my network is already being used.
View 1 Replies View RelatedI have this wierd problem on my MBP. Every time I launch iTunes it asks me if I want to allow incoming network connections. It asks this because I have configured my firewall settings to "Set Access for specific services and applications". The catch is, iTunes is already listed in the list of apps, and is configured to "allow incoming connections".
View 8 Replies View RelatedI just had a quick questions that i've spent all day trying to research, maybe i'm not hitting the right key words. I have a wired xbox 360 and using wireless on my computer. The internet is a university internet that I put in an ethernet address to configure to. So I connect the internet from wall to time capsule. Anyways, Whenever I use xbox live I cannot hit my wireless at all. My iPhone cannot connect to my wireless at anytime despite xbox live or not. So it seems the case that one connection is being strictly devoted to. I have my time capsule on bridge mode, but haven't had any luck switching to shared or anything without errors. Is bridge mode the right setting, does anyone know if both connections can run together? It has always worked just fine for me but recently my time capsule broke and I had to get it replaced and since then I can't get things going smooth again.
View 2 Replies View RelatedI have a MacBook Pro running OS 10.6. There is a website I used to visit to read e-books for free. Then one day (nothing changed hardware or software-wise), I could no longer access that site from my computer. My friend came over - with his PC - and was able to access it from my network. Today, I just accessed the site from my wife's iMac G5 (same network), but I still cannot access it on my computer using ANY browser (Safari and Firefox). I cannot access the site from anyone's network either --- making me think my MBP is doing something weird. I keep getting:
"The server denies connections. The server might be too busy or might be disabled. Try again a bit later."
is there any alternative to Little Snitch to control outgoing connections on Leopard?
Give me your suggestions.. I'd like specially something that isn't user-modifiable but that's set instead by machine's admin only.
I have someone monitoring my outgoing internet connections. That person sends pings, knows my logs and IP addresses I connect with, Skype is of his highest interest.Is there any way to protect myself from people monitoring what I do and what websites I visit? Or at least to know WHEN I am being watched? Is Network Utility of any help? Is so, how to interpret it?I don't know much about MacBook, I was a Windows person
View 2 Replies View RelatedAfter some of the latest upgrades in OS X Lion when computer goes into sleep mode some connections doesn't work properly. Web Server, SSH, mail server (if any) work fine but it is impossible to remote control the computer via VNC. When trying to connect to the computer once in sleep mode with VNC viewer or similar and after the user and password submmision you get the "The connection closed unexpectedly" error and it's only possible to remotely connect to the computer when manually wake up the machine, making useless the remote control service.
Info:iMac, Mac OS X (10.7.4)
I am currently at University studying animation. I use programmes such as Adobe Flash and photoshop. When I get a MBP I will be using it for those programmes, Microsoft office, watching tv shows and movies, football manager, music and internet browsing.
Now from what I understand of the intel processors the current i3, i5 and i7 are already very good. My question is do I really need to wait until SB to do the things I want?
I currently use a desktop dual core and it is slow for what I do but I can cope.
I'm thinking of 13" i3 MBP but if you guys really think I would need better I probably will go for the 15" i5.
