OS X Yosemite :: (10.10.1) Time Machine Not Connecting To Time Capsule
Dec 5, 2014
Recently when booting Yosemite on my MacPro early 2009 I get a message "could not load time machine prepare" but I am able to open it. But when I try to connect to my Time Capsule I get a message, "there is a problem connecting to time capsule". My iMac and Macbook pro both connect to the same time capsule with no problem. It seems the time machine prefpane on the MacPro has been corrupted. What to do?
I recently purchased a Time Capsule to use as a wireless hard drive. I connect to the internet both through wifi and ethernet to a educational network that does not allow extra routers, etc, to be added to the network, therefore I can not use the time capsule for this wifi.
I therefore want to connect to my early 2009 MBP17unibody to both the academic internet network for http/pop3/ftp/etc while simultaneously connecting to external hard drive to store data/itunes-library/etc.
I expect this has been asked before but I can't find any threads where it has. If anyone knows it would be highly helpful. I'd prefer to connect to both wirelessly but I could potentially put up with connecting to either or both with ethernet.
I have an external 500gb drive plugged into my brand new Time Capsule. The 500gb drive basically stores my entire library of music and my iTunes points to this external drive.
Is it possible to have time machine backup all information on the 500gb drive to the time capsule, so encase the external drive takes a dump, I don't loose my entire music library? Maybe time machine is already doing this, I am not sure.
I will be getting my new Macbook Pro in the near future and am very interested in using Time Machine to wireless back up my data to an external hard drive. I know I can use Time Capsule to do this, but also hear a mention of just getting an Airport Extreme and my own ext. hd. My question is that I have Verizon FIOS Internet and my modem also functions as a wireless router. How would the Time Capsule/Airport Extreme work with this? Is it possible? I do not believe that the Verizon router supports wireless N, and I would like to take advantage of the faster speeds. If I were to connect a Airport Extreme to the wireless router, would I then have 2 routers to choose from and just use the Airport Extreme to use the wireless N? I'm very confused as to how I could make this work.
As my 160N series Linksys router neither has gigabit ports, usb connector or dual band networking, I am looking for a replacement.
When it comes to Apple routers I am looking at 2 options - either the base station with an external USB drive or get a 1TB capsule with the buildt in drive and worries regarding reliability.
What I like about the Time Capsule is that it is neat to have all in one, takes up less space and only has 1 plug to attach, while Iike the idea that I can just connect a bigger drive later on the base station solution.
1. Will the connected USB drive function just like the internal drive in the Time Capsule for Time Machine use?
2. Will everything be transparent to Snow Leopard?
3. In case of both units with an attached USB drive - can I control who actually can see the drive and access it?
4. Do they support this DNLA thing so that e.g . PS3 can access an attached drive??
I plan to 'clean up' my Time Machine/Time capsule completely, whereby I want to make it impossible for third parties to recover all or part of these old backups.After I have accompished this I want to start from scratch backing up my Mac.
I have a MacBook Air and a Time Capsule - both from november 2011.Using Time Machine is givning me som problems.It works fine for some days, an is backing up as planned.But at least 5 times since I got the Time Capsule, Time Machine is asking to make a full Backup, and when I look in Time Machine, it says that there is no "old backup". It has been runing since november 2011.When I start a new backup, as it ask for, it takes at least 24 hours to finish - some times even longer.Is this normal? If not, what do I do?
MacBook Pro mid-2012, 8GB RAM, 750GB hard drive, Mac OS X 10.8.5
One Time Capsule at home
One Time Capsule in vacation homeÂ
MBP backs up everything on internal hard drive to Time Capsule at home, where we live during summer and spring. When moving to vacation home in fall and winter, MBP backs up everything to Time Capsule in vacation home.Â
During the 6 months at each residence, the backups work great to the Time Capsule at that particular house. However, after some time (maybe a week?), Time Machine displays an error in Notification Center: "Time Machine can't complete backup to Home Time Capsule" (when in vacation home) or "Time Machine can't complete backup to Vacation Time Capsule" (when at home).Â
It's obvious that this occurs because Time Machine was set to back up to 2 Time Capsules and expects both of them to be reachable. Is there a way to suppress these Time Machine errors for the time that we're away from one of the Time Capsules?
Ever since I updated to 10.6.1 I've had the following problems:
- Time Machine does not work at all with my Time Capsule. When it attempts to back up my data, Time Machine gets hung up with a status of "Making backup disk available..." and the icon in the menu bar just spins forever (the status appears in the menu bar icon's menu). I also cannot enter Time Machine; it gets hung trying to connect to the Time Capsule and I have to cancel it. Finder then takes up 100% CPU and I have to power down by holding in the power button (shutting down from the Apple menu doesn't work).
- I store my iTunes library in a folder called Music under the Data folder on the Time Capsule. When I open iTunes, it prompts me to choose my iTunes library. When I do, it starts to load the list of albums, then iTunes locks up and I must force quit it. This also causes my machine to not be able to shut down or restart from the Apple menu.
Oddly enough I can still access the Data folder from Finder with no issues. I just wanted to put this out there in case other people are having similar problems. It's pretty frustrating as all this worked fine before the 10.6.1 update.
I've just hooked up my 2 Tb time capsule, which is supposed to be the destination for time machine and also have a share folder to share music on the network. Originally I wanted to partition the drive, but since that appears to be such a headache I'll probably make do with one partition.
if time machine will try to overwrite the share folder when it runs out of disc space?
I've backup my Macbook Air Using time machine before reformat it to have window partition.However, after installing OS Lion 10.7.4, how do I restore back all my application and data on my last backup from time machine?
I recently bought a 500 TC and after a lot messing around i have the thing working, well near working, perfect.
The problem is, everytime it does a back up, which sometimes it has nothing to back up, it never finishes the job. In the end all i get is time machine giving me the "finishing back up" remark but the dam thing never actually finishes.
I have left it in the above state for sometimes hours just to see of it would finish and alas no joy!! Also, if i try and do anything else on my Macbook, while time machine is working, the "beach ball of death" apears and freezes my computer. Hence, everytime my Mac backs up i have to crash my computer which is annoying to say the least.
I did a lot of reading around various problems when using time machine and TC but can't find any solutions but lots of problems. TC is the worst apple product i've ever brought, it's been nothing but up hill trying to get this thing to work just like it says on the box.
I'm wondering whether its the TC or simply that time machine doesn't like my computer for some reason. Macbook, Leapord OS, 4G RAM, 160HD, iphone, inano, ipod, TC
My MacBook Pro locks up and shows the message "Please reboot your computer by holding down the power button" every time that Time Machine tries to run a backup. I turned off Time Machine and no more crashes... Sorta makes my 500 Gig Time Capsule useless.
I've been having a few problems with my TM backups since I got my new iMac (my MBA is working fine).
Something strange that I've noticed is when I enter into Time Machine (the program). Sometimes I see a bunch of my backups with times and dates where I can scroll through the different saves and restore if I want to. Other times though when I go into TM I only see the current save point. I can't scroll back and it only says Today on the right without any other save points. It is almost like I've only done one TM backup.
The other strange thing that I see is if I look at iStat. Sometimes it shows two Time Capsule hard drives and other times it shows only one. If I choose to change disk in Time Machine preferences the Time Capsule is listed twice. I don't think it has anything to do with a partition (which I never did) because both drives show the same used and free info (something like 377 free of 461) and I only have a 500GB drive.
Ok, so i picked up a 2TB Time Capsule a couple days ago and have tried everything i can think of to get this to work, but im at a loss... I had been previously using Time Machine to backup to an Ext HD attached via USB, and that always went smooth as butter.
I started my backup over 24 hours ago and after it completed its 130GB backup, it has now continued backing up endlessly incrementing the xxGB of xxGB without end. I stopped the backup and it then began at 140.9MB to backup. Once it reached 149.9MB it continued; displaying 149.9 MB of 149.9 MB. It is currently at 502.4 MB of 502.4 MB. I am using Snow Leopard. Has anyone seen this happen before? Or know how to resolve?
I have updated to 10.7.4, and now Time Machine does not work on my Time Capsule. I have erased all backups using the Airport Utility. When I try to run Time Machine, the disk is mounted, files are calculated, backup starts, then stops, and no backup is done. Also, no error messages.Â
I cannot seem to set up Time Machine using Time Capsule on my MacBook Pro. Evidently when I initially set up AirPort Extreme, I failed to select it as the backup disc.
Info:AirPort Extreme 802.11n (4th Gen), Mac OS X (10.6.8)
After months of continual Time Machine backups to my Time Capsule, an error message comes up saying that Time Capsule is busy. I've tried to delete the file and start over from scratch, but it won't let me.
Info: iMac, OS X Mavericks (10.9), 24-inch, Early 2008
Whenever I plug my Time Capsule into my Macbook with an ethernet cable it is not recognised. On the network setting it says that the ethernet is assigned an IP but whenever I try to start a backup session the device is not displayed? I can connect the Time Capsule wirelessly however due to the time it takes to do the initial backup I want to do it via ethernet.
I have a new 1 tb Time capsule that I connected with the macbook pro i7 with a ethernetcable in the ehternet outlet next to the usb on the time capsule.
However, I dont see the time capsule hard drive in the Macintosh HD devices.
I have just purchased a new Time Capsule but struggling to set it up in the most effective manner. I currently have a Belkin Wireless Router / Modem that I was using to provide me with internet connection and my home wireless network.
Now I have the TC, I want to use that for my home wireless network but I will need to still use my Belkin router / modem to provide me with the internet connection.
Is there a way I can disable the 'router' element of the belkin unit and just use it as a simple ADSL ethernet modem to connect to my TC and then let the TC set up the network?
I begin uni next month and have been offered accommodation. My room won't have WiFi but will have a wired connection. I'm wondering, is it possible to - rather than connect my MacBook - connect the Time Capsule to this connection and create a wireless network? Also, is it simple to switch from one connection (my current WiFi at home) to another (the uni connection)? Finally, is it easy to switch from being connected via Ethernet to using WiFi (after initial backup for example)? The lack of WiFi would really be rubbish when I have an iPhone and Time Capsule.
Can the Time capsule be connected via USB for the initial transfer? Ineed to get stuff of an old PC, does that mean I need to install a "gigabit" network card in order to do the transfer (I assume there is a difference to the "normal" network card". Third, do I get a 1st get time capsule and "force" (if possible") to use only 'N' while my free WiFi modem from my internet provider broadcasts 'g' signals to other 'g' laptop OR spend a lot more to get the new mode with dual band.
So i searched everywhere i could to try and find an answer to this question, because i imagine at least someone on this planet is having this same problem, but i haven't found anything. so here i am, asking you:
Originally i had bought a Time Capsule 1TB and connected it to my internet modem and used it to create a network, then i had a AirPort express that i used solely for AirTunes to my stereo. So i had wireless backup for my MBP, N-Speed wireless internet for computer and iPhone and wireless music in my room, it was awesome.
but i just moved into a condo downtown that we are subleasing. The owner told me it had wifi so that was a selling point for me. but heres my problem, currently i have my TC and AirTunes on one network, for music and backups, but there is no ethernet connection in my condo, so i cannot directly connect it to the internet, so for internet i connect to the public wifi, and have to switch every time i want music in the living room, or want to back up., and i cant do either at the same time as i connect to the internet.
and i cannot extend the wifi in the building since it is not N. so i followed the instructions to connect my TC and AirPort to my existing WiFi, and to my knowledge, they will both connect as clients and be accessible all through my buildings WiFi. But, when i take them off their own network and connect them to the public wifi they just disappear and i have no way of finding them ever again through AirPort Utility unless i reset them.
so i was very troubled with this and it bothered me for ages, and i was just using 2 separate networks, but then i realized that every time a new client connects to the building's wifi it goes to a page where you must click 'ACCEPT" to the terms of use before having access to the network, so on my MBP i can open safari and click accept, but my TC and AirPort cannot click accept.
is this my problem? what do i need to do? can i connect for the first time to the network through ethernet from my MBP to the TC and turn off my wireless card in my mbp then click accept in safari on my mbp? or can i connect my mbp to the wifi and reset my MAC or IP address to the same as my TC or AirPort then click accept, that way the TC's and AirPort's IP and/or MAC are registered on the network and they can continue to connect without being asked to accept the ToU?
I tried to restore a Time Machine Backup but once the recovery process start there a pop up saying that Time Machine can´t modify or delete desktop and everything stops!.
I have an HP office jet J4680. I have used it wirelessly by being connected to my time capsule network and printing from my macbook for over a year now. I just moved and changed the name of my time capsule and the printer is no longer connected. I have looked around on how to select the new network but I don't see this option. How can I link the printer with the network again?
Info: MacBook, Mac OS X (10.7.3), 2 ghz intel core 2 duo, 2 gb, ddr3
I'm getting a new 13" MBA, upgrading from a 2006 macbook. I have it all backed up to time capsule. Can I just connect the MBA to my time capsule and restore the macbook image?
I have a mixed Mac/PC environment - Macbook Pro (snow leopard); iMac 21 (leopard); 2 x Dell laptops (XP) - and an existing wifi network from a Belkin 8233-4 N modem/router. Also connected to the wifi network is a WHS for backing up the laptops; an HP printer; 2 iphones; an xbox 360; and a Wii.
I've just bought a 1TB Time Capsule to use to back up the Macs as my previous external time machine hard drive just died (which was connected via USB to the iMac).
At the moment, I've got the TC set up to join my existing wifi network (it's connected via an Ethernet cable from the Belkin wireless router), however I'm getting issues with the wifi network not working properly and being unable to connect to the internet. Every time you wake the Mac, you have to manually reconnect to the wifi (and sometimes even re-enter the password), and things work OK until the Mac goes back to sleep. When I go into the Airport utility, the settings say that the TC is set to create a new network, so I reset it back to join an existing network via ethernet, but then if I go back to these settings a little later (after having problems with the wifi connectivity), they have reverted back to create a new network !
I needed to check on my network. When I opened Airport Utility, the only thing that loads is the internet icon, showing green. Neither my TC, or an older airport extreme on my network, are identified. Clicking on the drop down shows "no new wifi or airport devices found" .Â
