My friend just spilled some water on her new mb. The water was spilled on the side with the power adaptor. It immediately shut off and we took the bottom off to expose the inside of the computer and put a fan on it to dry out. We plan on leaving it like that for 24 hours so it is completely dry. Is that normal for it to immediately shut off like that?
I spilled a little water on my macbook screen and I just got a paper towl and wiped it off at first but then I realizewd a little later than it had a spot and if you tilt it you can see like a scratch on the screen.Right now I have it turned off and titled upside down. Should I do this? If yes, how long should I keep it like this? PLEASE HELP ME! I am a nervous wreck and on the verge of tears because my mom will KILL ME if she finds out and I dont want it to be messed up.
Almost had a heart attack. I was in the other room and she screamed that she spilled water on it. I ran over, grabbed it, flipped it upside down, turned it off, used an air compressor and paper towels to get whatever water out. Let it off an open overnight and everything appears fine.
She can go back to using her 5 yr old hp brick of a laptop. My MBA is off limits. And 2 months ago she broke her ipod (gift from me) running on a treadmill.
Well it wasn't actually spilled. My friend was crying on it. Its hasn't been a good today, but anyways I got a fan on it and a hot halogen lamp on it. So far its doing well. Should I leave the fan and light on the night? I have a 3 year warranty. And I would pry out the battery but I don't have a screwdriver in my dorm!
I have an old imac g4 and my wife spilled water on the keyboard (this has finally scored me the opportunity to purchase a new macbook pro). However in the mean time I ran up to walmart and bought a keyboard that said it was universal. As you can tell I am typing so that much is working, but ever since I plugged in the new keyboard I have had no sound. On this keyboard there is no volume control. Any suggestions as to how to get the speakers to work. I have no sound on video from the internet, or music from iTunes. In both situations I have turned the volume on the players up as loud as possible.
Water spilled on the right side of my keyboard, but everything worked fine right after. However a day later the Delete, Eject and Volume buttons stop working. I took off the keys and cleaned underneath with a Qtip. still not working.
I recently spilled water on my macbook pro and found that my left, right arrow and shift keys no longer worked. What I didn't realize is that my power button was affected as well (I tried shutting off my computer a week ago and it wouldn't). So, it usually rests on my desk, charged. Last night, however, I took it off and it discharged. I charged it and found that I couldn't turn it on anymore.
Is there any way to remotely turn on the computer? I was looking into something like a USB keyboard or remote, but can't decide for sure what to do.
I just spilled literally about four drops of water on my trackpad. However it was in the bottom left corner and some may have got through. When I rebooted (I know I panicked should not have turned it on 10 minutes later) It worked briefly and then I could not scroll or click. I have applecare, but I don't think it covers this.
I spilled water on my Macbook and now it's splotchy, bright in some places, dark in others. It's an early 2008 model white Macbook. I have an older one that's not in use. It's a white Macbook also, same size.RM5510L8U9B is the serial number. Can i swap out the screens? Will they be compatible?
I've spilled a tiny amount of water on my trackpad (drops of sweat from a glass, so not much at all) and now the trackpad isn't working. The cursor is delayed and inaccurate and reminds me of windshield wipers on a dry windshield in that it bounces across the screen. Also, the menu of a right click keeps popping up but I haven't right clicked. Is there any way that I can dry under the trackpad? Can I take the trackpad off? I have a 13" unibody. I did fold paper towels in half and stuck them in the cracks between the trackpad and the wrist rest and that did get some water up, but there is either still water under there or permanent damage. I'm not very tech-savy, so I'd rather not take the whole thing apart on my own, but it is work issued and I'd have to take it to them before I can take it to an Apple store.
I recently spilled water on my mac. It seemed to recover but then I realized the sound has stopped working. When I try to adjust the volume a no entry sign appears (a circle with the line through it), but when I turn my computer on it still makes the bong noise so obviously the sound isn't totally broken. Any advice as to how I could get my sound back? I've tried going to sound through system preferences but had no success.
I recently spilled close to a tablespoon of milk onto the keyboard. Most of this landed on the keys themselves. I thought nothing of this and continued working for 4 hours. I left for 6 hours and came home to a non working Powerbook G4. The green powerlight does come on. I let sit for one day. Still nothing.
I thought I'd write this brief how-to incase anybody else ever needed the information. I have bought 3 power cords/connectors/adaptors for my iBook in the last three years - crazy, right? I stepped on the tip of the first one by accident, and was unable to bend in back into shape. The second one (a third party version by MacAlley) spontaneously conked on me, the brick stopped worked. And more recently my third, another third party bought cheap off eBay because I was fed up of paying, developed a connection issue somewhere in the wire (it worked fine, then I had to fiddle with the wire to get it to work, then it stopped working). With all these broken connectors sitting around, I figured there must be a way to solder them together and avoid paying another 30$ on eBay and being without a laptop for 2 weeks.
STEP ONE: Assemble all the broken adaptors you have, asses what works with what. - I took the brick from the original which was working fine and the tip from the 2nd cord (the one where the brick stopped working)
STEP TWO: Cut off the tip from both cords, make sure to leave plenty of wire attached to the brick and tip your using.
STEP THREE: Strip the tips of both wires, there should be two sections; an outside section (wrapped around the inside section) and an inside section. In the original Apple adaptor, the outside section was braided around the inside (which was incased in rubber) along with a yellow insulator. In the second adaptor (MacAlley) the outside was twisted around the separate inside wire.
STEP FOUR: Clearly seperate the two sections of wire from each, then twist them together. MAKE SURE THEY TWO SECTIONS (INSIDE VS. OUTSIDE) ARE NOT TOUCHING. You don't want to short-circuit your adaptor.
STEP FIVE (optional): Solder the wires together
STEP SIX: Tie a knot in the power chord before the connection, to avoid accidental stress on the joint, and cover it all with electrical tape.
So far, its been working fine. But be warned, THERE IS SOME RISK INVOLVED WITH THIS PROCEDURE. My battery is charging fine and the iBook is powered as usual. I'm just waiting for the battery to fully charge to make sure the power adaptor stops charging the battery when its full (don't want a cooked battery!)
My macbook pro will not power on the AC adaptor when the battery is connected, I have to disconnect the battery to get it to power up on the AC Adaptor, tried another battery still don't work just has a X on the battery icon at the top. Running Mavericks at the Moment.
I spilt some water over my unibody MacBook Pro about 36 hours ago. It was dark, and as the screen didn't respond I assumed that it had shut down, but on closer examination the next morning (after turning it upside down) I found that it was still running. I shut it off then. There didn't seem to be much water inside the MBP, so I tried turning it on just now. It made all the right start-up noises, but nothing on the screen (the Apple logo also wasn't illuminated). I forced it to shut down again right after.
I'm not near a service centre at the moment, so am wondering if I should just wait a few more days, or get it sent in right away? I guess the fact that it starts-up is encouraging, so hopefully the damage is just limited to something connected to the monitor. No water was split over the LCD itself, but I'm guessing some may have entered at the back of the unit, where it connects to the main body. I did almost the exact same thing to my 3yo MB about 2 months ago, and it started working after about 3 days. I guess I should be more careful about what I put near my computer in future!
I have a 1.67 Ghz, 1gb ram 15inch powerbook. I need a new mains power adaptor as mine is pretty well had it. I've looked around on the web and am not sure if I need a 45watt or 65 watt adaptor. Does it make a difference? I'm based in the UK.
Last night (laptop was unplugged, off but with battery in) I accidently dropped a small amount of water eg like a cap amount on the keyboard/mouse area.I wiped it off & thought nothing if it as it was a small amount.Woke up this morning, tried to switch it on but nothing. I put in the charger cable but still nothing, then I could smell some burning so quickly disconnected charger & battery.
I am looking to connect my macbook pro to an Acer G24 monitor, but am not sure what best way to do it.The resolution of the monitor is 1920x1200, and it is a 24" screen, with VGA, DVI, and HDMI ports.My macbook pro is the late 2011 entry model.
Will there be a difference in the quality of the picture on my external monitor, depending on whether I connect using a HDMI cable or a DVI cable? I will have to buy an adapter for each of these, to plug into the mini DVI port on my mac, will this alter the quality of the picture at all? If I were to buy an Apple Tv, would I be able to plug it straight into my monitor using a HDMI cable? If so, how would I manage the audio, as my monitor does not have speakers. Would using a thunderbolt cable (with HDMI adaptor) increase the quality of the picture of my monitor?
Info: MacBook Pro (13-inch Late 2011), Mac OS X (10.7.4), Apple TV, Thunderbolt, Monitor
I went to turn on my Powerbook G4 (Aluminum 1.67GHz Low Res) today and when I plugged it in, I noticied a kind of crackling or popping noise. I unplugged the power adapter and tried again. I knew that my battery was dying before this (could only get about 30 min on a charge). But now I cannot start my Powerbook. Whenever I plug in my power adaptor, there is no green/orange light. However, when I take the battery out, I hear the Powerbook trying to start up (hard drive spin). But then there is nothing but my fans on full blast! They will not stop and there is nothing on the screen. I left it there for a good 5 min and nothing changed!
I just bought myself an entry-level MBP 13". Coming from PB 12" 1.5 ghz, this is a major upgrade for me, and I am happy about it. However, there is one thing that I cannot figure out.
I have been a happy user of Dell 2209WA, which works perfectly with my PB. Today, I connected the monitor to my brand-new MBP via Mini DisplayPort to VGA adaptor. After connecting it, I closed the machine and woke up using my mouse. Immediately after that, the monitor said "Entering Power Saving Mode." I clicked the mouse, then the picture was sort of blurry. Then the monitor kept on entering power saving mode... As for the picture quality, even after I opened system pref. and detected the monitor, it was still not good. I'm totally bummed, because I really like the monitor.
I just aquired a PowerBook G4 (500Mhz) and it is dead. It will not turn on no matter what I try and when I plug in the power adaptor it glows a bright orange (almost red)...what does that mean?
256GB SSD-option?- 2.3Ghz (or whaterever it is these days) CPU?- 4GB RAM?- SD-card slot?- Power outlet and port hatch on the _same_ side?I think the last one is especially important on a machine that talks style just as much as essence. It is stupid to hook it up to an external monitor and having cables on both sides. Unclean.The SD-card slot is nice, because it is so much faster than a USB-solution (that be cable, or even the cheap Express-cards found on MBP 17").
We have two Mac Laptops, 1 is the little white Macbook, the other MBP. We have DSL coming in and then thru a 2wire modem then thru the Airport. The 2 wire modem is connected to a PC. All of this sits about 40 feet from the bar where we use the laptops and is a straight shot.
My problem is that the the newer MBP is stuck in the mud when it comes to connecting, and then holding any type of signal strength with the wireless signal.The older little white MB works great, every bar on the wireless icon is black, on the other (as I type this they are both on and side by side..) only has one.
When pressing Alt/Option and clicking on the wireless icon the good computer shows a transmit rate of somewhere between 20 and 26 when I have checked it several times this morning, the bad one has never been above one.It seems for the price I paid for the Airport Ex. BOTH of these units should be getting full strength signals.Ever had this problem? No of any possible solutions?The fact that the slow one is my wife's machine doesn't make life any easierI figure before I make an Apple reservation I could do a little research myself.
I am attempting to edit two photos. My goal is to take the two photos and place the objects side by side so that both my daughters appear in the same photo.
Info:MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.3)
I need some sort of free program to take two pictures and put them side by side. It's a one time deal so I don't want to pay for it, I just have images of artwork and their respective placards that I'd like to be able to put side by side as one image so it's easier to follow. I know it sounds basic and probably dumb but I literally have zero experience with photo applications.
I got a macbook pro base model last year (2009 model) and my girlfriend just got a macbook base model last weekend (2010 model)Seems as though her macbook has better specs than mine... I'm also considering upgrading to Snow Leopard but don't really see the point.That inertia scroll thing hers does is pretty cool... other than that everything is pretty much the same to the naked eye after a few hours of use.
I'm looking for a comparison between all iMac processors. I believe that the only processors used for iMacs have been G5, Core Solo, Core duo, Core 2 Duo, Core i5 and Core i7. If I'm missing something let me know.