I have regularly been using TM with my Leopard. I just wiped my MBP clean and installed Snow Leopard. I have done a manual restore of all the files I need. My question is, can I use the old TM hard drive as the new TM backup drive, without losing the old backups? In other words, if I plug in the old TM drive and designate it as a backup disk, would my old backups be removed?
View 2 RepliesBasically I have a 750GB hard drive in my Macbook Pro and over 300GB is taken up with 'BackUp' data. This is more than the total of everything I have on the drive other than that. Time Machine has always been setup on an external drive and when searching all files on the Macbook there is nothing for backup files so don't know where it is coming from.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
How do I get Time Machine setup on this hard drive?
Info:
Mac OS X (10.7.3)
How do you set up, step by step, Time Machine? I want to create a partition on my external HDD (40GB in size, 120GB capacity) and have it back up to that partition. Is it possible? I only use around <30GB so I figure 10GB extra space is more than enough.
View 4 Replies View RelatedI have a Windows LAN to connect to a USB backup drive. I cannot find out how to set up Time Machine to connect to the USB backup drive. Does Time Machine only work with Airport devices? If not, then how do I set up Time Machine to see my USB drive on the network?
Info:
iMac, Mac OS X (10.7.4), Windows LAN via Netgear router
I just got my new iMac 21.5, works great. I'm a Mac newbie. I have a remote Windows machine I'd like to use as a network drive. I also have a NAS (Netgear SC101T) which I basically don't use anymore, thus I'll use the PC. I have two wireless routers so that function is of no value to me. So IMHO I don't need a Time Capsule.
I'd like to configure Time Machine to use the Windows networked drive as the "Time Capsule". Is this possible? If so, how do I do that? And how does that impact the Restore functionality if I'm not using the $300+ Time Capsule? Will it still restore a dead machine if it comes down to it?
Ever since I updated to 10.6.1 I've had the following problems:
- Time Machine does not work at all with my Time Capsule. When it attempts to back up my data, Time Machine gets hung up with a status of "Making backup disk available..." and the icon in the menu bar just spins forever (the status appears in the menu bar icon's menu). I also cannot enter Time Machine; it gets hung trying to connect to the Time Capsule and I have to cancel it. Finder then takes up 100% CPU and I have to power down by holding in the power button (shutting down from the Apple menu doesn't work).
- I store my iTunes library in a folder called Music under the Data folder on the Time Capsule. When I open iTunes, it prompts me to choose my iTunes library. When I do, it starts to load the list of albums, then iTunes locks up and I must force quit it. This also causes my machine to not be able to shut down or restart from the Apple menu.
Oddly enough I can still access the Data folder from Finder with no issues. I just wanted to put this out there in case other people are having similar problems. It's pretty frustrating as all this worked fine before the 10.6.1 update.
I've just got my iMac so for me it was important to get TM up and running before I start doing some real work (and hard play!).
I want to share the lessons learned from my experience and from others in this forum in the hope that it will help others.
I am using a NS4300N NAS from Promise on a LAN with an iMac running Leopard 10.5.2. I connect to it using SMB. It should work with any NAS since the instructions here are not NAS specific. I haven't tried with AFP.
I just purchased a new Macbook Pro to replace my iMAC. The iMAC backs up to Time Machine. Is using the Time Machine backup easy to setup the new Macbook?? The thought of having to install all my apps and migrate all my data sounds overwhelming and I'm hoping Time Machine makes this painless?
View 2 Replies View RelatedI have wifi. Do I still need to plug my new Time Machine with wifi capability into my new Macbook Air with an ethernet chord for the initial set-up?
Info:
MacBook Air, OS X Mavericks (10.9.4)
I have two questions. Firstly, I am considering buying a western digital MyBook Studio Edition II [URL]. If I use time machine with this drive, will I be able to remove one of the drives and keep it off-site for safekeeping and have time machine continue to backup on the remaining one as usual? Secondly, if I remove drive #2 and keep it off site, would dropping it back into the raid setup update drive #2 with drive #1's current time machine backup? I'm new to raid, and I am basically trying to have a time machine backup, and a off site backup.
View 9 Replies View RelatedSo if my current setup on my Mac Pro is (2) 1 TB drives.
(1) for use, and (1) for Time Machine.
Can I connect a 1 TB Time Capsule to essentially "back up my Time Machine back up"?
So I want to have (3) 1 TB HDD's, (2) in the Mac Pro, and (1) in the Time Capsule, all with the same information. I basically need to know if the software is set up for a 1X's backup only, or can it copy the same information again as a redundant backup?
If I open Time Machine app I get the message 'your time machine backup disk can't be found'. When I click on the 'setup time machine' option the window closes and nothing happens.
Info:
imac 2.4GHZ, 6GB RAM, 500GB HD, Mac OS X (10.6.6), RME FF400
I have a 2009 imac with snow leopard. I want to set up my time machine with an external USB or Firewire hard drive, but I'm not sure which would be better or less costly. Need some advice on which brands would be best. I have a My Book on USB right now, but as it's configured for both Mac and Windows files (I use Parallels) I cannot use it for Time Machine. Also, I've been reading that rebooting through Time Machine could take a long time, but if i could partition the new drive and make some of it a reboot disk alone, that would be faster. I don't know how to do that, or which external drive to get that would work best for that arrangement.
Info:
iMac, Mac OS X (10.6.8)
I was trying to set up my Time Machine to an external hard drive. I didn't continue because it asked to "initialize" the hard drive which I had a lot of important things on.
I have another external hard drive I'd like to use but, my Time Machine has this error code of -43. What is this and how can I use my Time Machine on another external hard drive?
So I've ordered my new 13" Macbook Air (2.13 GHz, 4GB RAM, 256GB Flash) and I'm wondering the best way to transfer data from my 13" MBP? Which would be the best : Mac-To-Mac migration (via ethernet with the attached adapter) or Restore from Time Machine? I'm worried about compatibility issues with restoring from time machine, or migration all together, and was contemplating setting it up as a brand new machine, but that would be extremely time consuming. Also because I have iLife '09 on my MBP will that replace iLife '11 on my MBA?
View 20 Replies View RelatedI really love Time machine and I'm using it on my internal drive. I know it not the best way to secure data. That why I'm planning to buy external hard drive. I read time machine and backup data on network drive, running leopard.
I'm wondering is there any way to setup time machine to backup my data on network hard drive running Windows XP. I use my macbook with my windows desktop PC for internet and sharing file. It would be great if time machine can backup data on my windows desktop network hard drive.
I have an external 500gb drive plugged into my brand new Time Capsule. The 500gb drive basically stores my entire library of music and my iTunes points to this external drive.
Is it possible to have time machine backup all information on the 500gb drive to the time capsule, so encase the external drive takes a dump, I don't loose my entire music library? Maybe time machine is already doing this, I am not sure.
As my 160N series Linksys router neither has gigabit ports, usb connector or dual band networking, I am looking for a replacement.
When it comes to Apple routers I am looking at 2 options - either the base station with an external USB drive or get a 1TB capsule with the buildt in drive and worries regarding reliability.
What I like about the Time Capsule is that it is neat to have all in one, takes up less space and only has 1 plug to attach, while Iike the idea that I can just connect a bigger drive later on the base station solution.
1. Will the connected USB drive function just like the internal drive in the Time Capsule for Time Machine use?
2. Will everything be transparent to Snow Leopard?
3. In case of both units with an attached USB drive - can I control who actually can see the drive and access it?
4. Do they support this DNLA thing so that e.g . PS3 can access an attached drive??
I've got an external drive that was a Time Machine backup drive. It's at the police station as evidence for something and they will not let me take it back. However, they will let me come down and make a copy of it. I might only have one shot at this so I'm trying to think of the best way to do it successfully and quickly.
Can I just bring another external with me, my Macbook, and then copy the files from the Time Machine backup external drive to the other external drive? If so, what is the facility for doing this quickly? I'm kind of new at Macs and am unsure. I do not have an extra Mac that I can simply use Time Machine to restore to to replace it's contents.
My old time machine drive (250GB) seems to have died. I have a new drive (1TB). How do I:
1. get data off the old drive?
2. set up the new drive?
Info:
iMac, Mac OS X (10.6.8)
I would like to use FileVault to encrypt both my hard drive and time machine back up external drive. Does encryption noticeable slow down the computer.
Info:
MacBook Air (13-INCH, MID 2011), Mac OS X (10.7.4)
I'm a graphics professional taking the plunge into a Mac Pro. After some research, this is my notional drive setup:??GB SSD Boot Drive in the optical bay2 x 1TB 7200rpm SATA in RAID0, partitioned for 1.Data and 2.Scratch (therefore <2TB data)I obviously need to make sure that RAID0 is safely backed up. I've got an online backup service in case my house burns down and I'll be backing up individual projects onto optical media, but I will of course want to Time Machine the Data partition of the RAID.Now, for that Time machine drive I can either create another RAID0 from the same kind of drives (with the risk that entails), or for about the same money get a 2TB 5400rpm (leaving a drive bay free for future use, possibly another backup).
View 6 Replies View RelatedI upgraded the hard drive in my MBP (4,1 Mar '08) this weekend from a stock 5400rpm 250Gb to a 7200rpm 320Gb WD Scorpio Black. I used Time Machine to restore the system onto the new drive - via a new 1Tb external drive which I first prepped for network use via my AEBS but hooked up via FW800 to do the first backup before upgrading the hard drive. Laptop is fine - everything pretty much seems as it was - but Time Machine isn't. Every backup appears to be of the full hard drive contents (have only excluded the Parallels folder)! My otherwise empty 1Tb drive now has nearly 300Gb of backups of a 140-150Gb disk!!
Here's the du stats from inside the /Volumes/Backup of../Backups.backupsdb/..MacBook Pro :
144080500 2009-05-03-000434
142168476 2009-05-03-090644
142754912 2009-05-03-093113
35032544 2009-05-07-025139.inProgress]
3rd May was when I did the hard drive update so it was already doing the full drive backup right away, I had originally thought it was something to do with swapping out the hard drive but that's not so. I haven't been able to complete a backup since as its also incredibly slow. Left the laptop plugged in overnight and it had only completed ~30Gb in about 5-6 hours - over FW800! The drive is OK - I can copy over large files and that goes super fast as you'd expect. Ideally I'd like to keep at least the first backup from before the drive upgrade. Should I (can I?) move this onto another drive then reformat and start again?
I have a MacPro, OS X 10.5.7. I have TM configured to back up to an external 1 TB firewire drive. I use Adobe Lightroom for photography. it provides a checkbox to allow you to backup all photos as you import them from your camera card. Adobe recommends selecting an external drive for these backups. But for some reason, it does not allow me to select the external drive that TM uses.
View 2 Replies View RelatedThere have been a few threads about how to move a time machine backup to a new disk and maintain the existing backups. Some have done this with carbon copy cloner.
This also works with the built in disk utility in Leopard. I turned off time machine first. Then I booted with the Leopard install DVD and ran disk utility. I partitioned the new disk and gave it the same name as the old time machine drive (not sure if that's necessary). I then used the restore function to clone the old time machine disk to the new one. I rebooted, turned time machine back on and it picked up where it left off. The first backup with the new drive took a little longer than expected considering nothing had really changed but all the prior backup data is intact as if nothing had changed.
Just wondering what experiences other people have had using time machine on a Mac Pro OS 10.5.2 with an external FW400/800 HD.
I am looking at a Lacie D2 Quadra 500GB to back up the standard 320GB internal drive. Never used time machine before, is it any good or is it better to use retrospect or similar. I never use more than 100GB of my main drive as most is backed up to DVD for extra safety. Is it worth getting a SATA card.
this may seem strange to ask but i recently purchased a 1 TB drive and formatted it correctly to use it as a time machine archve.
after a few HOURS my 160 gig mac primary disk was backed up.
i then created a second folder entitled "not time machine backups" and am copying my iphoto library etc to it.
i plan on using that drive to store my photos from now on. it this ok?
can i use this so called "time machine" drive as a second hdd? i figure as long as i dont actually touch the time machine folder, i should be ok, right?
I just setup my mac pro, and started to install my applications. Then I realized I had an older drive from way back that might have some useful stuff on it. This drive was my boot drive, with old apps installed on it. Is there a way through Time Machine (or otherwise) to install these apps on my new boot drive? I can't find the proper install dmg's.
View 2 Replies View RelatedI finally got my copy of Snow Leopard and want to do once more backup before installing. And now, my Macbook isn't detecting my Time Machine drive. This is sudden. It worked this morning. Macbook running 10.5.8. Time Machine drive is a USB WB MyBook.
View 9 Replies View Related