I have a friend who's mac has corrupted files and no longer boots. What is the best way to recover any data or backup the drive and run a install?
Or is it possible to save his current install? I'm not sure if you could just recover using his installation disk.
I have a EMac with Mac OS X vs 10.3.9 Prior user erased hard drive. Took to ADR data recovery and they scanned the hard drive and were unable to recover any data. Looking for input on other techniques to recover data from hard drive or other companies that specialize in Mac data recovery.
View 6 Replies View RelatedSo, I'm trying to recover some lost files. I put it on Data recovery 3. Everything went fine until the power in my house went out, stopping the entire process. NOW when I try to run the process, it just stalls at 33,3%, with no indication of how much time left...
I have a dead La Cie Big disk terabyte external drive. It won't mount and it isn't recoverable the way it is. So I looked inside, it's 2 x 500 gig Seagate drives. So, I took the 2 drives out and installed one of them in a Mac Pro to see if it would mount on it's own. I figured probably not, since there were two drives mounted in this La Cie external case, they must have been RAID-ed together. I don't really know much about RAID, obviously.
Disk utility saw the disk, but it wouldn't mount and gave the unreadable message. Tried to disk utility it, and it gave file system errors, not surprised. It looks like you can't separate them, the RAID must split the files onto the two disks.
Is there any point to trying the utility Data Recovery on it? Or should I just tell my boss the only way to get the data back is to send it out to a data recovery place? I don't want to try and reformat them if there is still any possible way to get the data off them. I think the drives are fine and would work as a terabyte drive in the Fantom case if reformatted, but then we lose all these important projects.We seem to have the worst luck with external hard drives.
The odd thing is that I have another dead terabyte drive, a Fantom drive in which one of the 500 gig drives started clicking. I took both 500 gig WD drives out of the Fantom case and installed the two Seagate 500s from the dead La Cie case. It shows up in Disk Utility as an unformatted 1T drive. I was hoping it might just reconstitute itself in another case, but no go. If worse comes to worse, I will reformat it and it will probably be useable.
I have a student who put most of her project work for the past few semesters on an Western Digital hard drive which was in a I/O Magic shell. It was dropped and immediately started a grinding noise. She took it to the local mac guru who has been unable to recover any of the data. My gut tells me it's a goner but I wanted to run it by the gurus here to see if they might recommend anything that we might try before giving up.
View 8 Replies View RelatedI am in need of a data recovery app that can recover data off a Fat32 drive and save the recovered data to a NTFS drive (I use NTFS-3G). I have PhotoRec but can't seem to navigate to my NTFS external to save the data (the only drive big enough to save the data too is my girlfriend's 500GB external and it is NTFS).
Any tips to getting photorec to navigate to the drive (I am pulling from one external to another). Photorec sees the one I want to save too I just can't get it to select it. Also if there are any other programs yall recommend, I will give them a shot.
The first time I connected to my HDTV using a mini displayport-dvi and a dvi-hdmi adapter, it worked flawlessly. Stupidly, I set my TV to a resolution it couldn't support. Now the screen only turns blue until System Preferences eventually crashes and the TV gets no signal.
I've tried clearing my PRAM, deleting the profile in the colorsync folder, and even deleting /Library/Preferences/com.apple.windowserver.plist out of desperation. I've confirmed that it's not a problem with the adapters by successfully getting another HDTV to work. Where could could OS X be storing the display's settings?
As anyone found a way to create a video playing screen saver in Quartz Composer in Snow Leopard. These screen savers work fine in Leopard but crash System Preferences when you attempt to load them in Snow Leopard. They seem to work just fine within Quartz Composer.
View 3 Replies View RelatedNeed some help here. My friend is a DJ and had an external drive with tens of thousands of songs on it. The plug broke on it and I think that corrupted it since Eject was not used. I pulled the 3.5in HDD out of the case and hooked up up with some other external plugs I have.
When I run Data Rescue 3 on it, it shows that it sees almost all of these and the only two formats it counts up are mpeg and mp3s. Data Rescue then finishes the scan and has a bunch of crap files that are not needed, but none of the songs show up. What is going on here? Did I miss something in Data Rescue 3.
The drive is a 1TB drive and the backup drive we are using is 640GB, but there was only about 250GB of music on the drive to begin with.
I have an iMac that is now close to two years that I have been a little unlucky with. Two times the harddrive has crashed and had to be replaced. Last time I managed (learned from experience) to make a TimeMachine back-up. I can see on the external drive that 160gb are in use but I am unable to gain access to the files. The main thing is a lot of pictures that i would really like to recover. It is now about 4 months ago this happened so new pictures have been uploaded in the meantime.
Info:
iMac
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
It was bad sign and I had to take my computer to the Apple service.
The intern disk had to be replaced and they told me that they can't recover the date ( not in theyr shop)
How works the data recovery once the disk is out of the computer ? Is there necessarily a "white room" process wich is very expensive ?
Info:
iMac, Mac OS X (10.6)
I have an external drive I used for backing up my mac and was therefore HFS+ formatted. Having had my previous mac stolen I want to recover my files from this hard drive.
For some reason however, the file system seems to have corrupted itself. The drive cannot be read from any mac. I have managed to acces the drive using transmac on a PC but macdrive won't read it.
In the disk management panel of a PC the drive is identified as having a RAW file system.
Any ideas on how to recover my data?
So to make a long story short I have a hard drive with 1.5tb of data I DO NOT want to lose, and when plugged in it looks like the attached picture.
A format that my mac can't read, and I would obviously like to recover this data in the cheapest way possible.
I don't know if this is enough info so if you need more I have a great long story how this all happened.
my HD stopped working for whatever reason. i got the folder icon when i started my Mac mini that day and did lots of troubleshooting with no luck.
i ended up putting a new one in and all is fine now. EXCEPT all my pics and whatnot is on my old HD. is there any way possible to recover the data? what are the possibilities of getting the data over since the old HD stopped working? ive seen alot of those HD to USB data recovery connections to transfer info but dont know if it will work?
I have a LaCie Big Disc Extreme that has failed. The drive indicator flashes continuously, and the disk utility can not see it. I have tried FW800 and USB to no avail.
Here's the problem: it is a 500 GB drive, but when I opened it, I found that it is actually 2 250 GB drives with an ATA interface. Is anyone familiar enough with these drives to know how they are formatted, and how to recover the data? I am running an early 2009 Mac Pro 8x2.26GHz.
As I was trying to install Arch Linux on my Mac (dual-booting), I accidentally deleted my Mac partition! To add insult to injury, the version of linux I downloaded was the wrong one, so I couldn't even have that. I reintalled Mac 10.5 (I have the 10.6 cd, just haven't reinstalled that one yet), and now I want desperately to recover from the old partition.
View 10 Replies View RelatedSo unfortunately, the hard drive on my 2005 G5 crashed, atleast that's my guess. All it does is click when I attempt to turn it on. I'm fairly good with computers, but when it comes to fixing one - I hand it off to someone with a little more knowledge.
I have two hard drives in the computer - one that's got the OS installed (factory 150GB), and another I use for saving videos, pictures, music, etc (750GB). Now, I'm assuming that because the computer doesn't boot up, that the hard drive with the OS is the one that crashed? Is that a safe assumption?
Secondly, is it possible to recover the application files and other data that's been stored on the crashed drive? If so, how much should I expect to pay? Is it something a local 'work from the home' computer tech could do? The reason I ask is because craigslist is full of guys willing to work on the computer for a decent price.
would need some help on this matter.
- It's on an external hdd, 1tb Western Digital MyBook hooked via firewire.
- It's a folder containing music (MP3 + FLAC).
- All the data in that folder is gone, 0 file, tried on my Macbook and Windows desktop and both came out with the same result.
- External HDD is NTFS, using Paragon NTFS on my Macbook.
- The data are still in the hdd, just that it doesn't show any data in the folder, because the space used is still there + the songs still play on my media player library list.
So main problem here is, how what do I need to do to view the data in that folder now.
Is there any way or program to recover data from an external hdd with a ntfs-structure that has been deleted using ntfs for mac (paragon) on osx?
I have tried several windows apps but i'm only able to recover the files that have been deleted in windows, the files deleted using osx don't even show up in the applications.
I formatted a mini-DVD of my webcam by mistake. I did a 'quick-format'. Do you know a good software (if I have to pay it's ok) on OSX to recover the data from it?
View 4 Replies View RelatedI'm so desperate for my hard disk. I have recently lost the partition table on a 300GB Samsung Firewire drive which contains my works. I would like to try to recover the data from this drive, but I can find no (command-line or otherwise) to do this. I have got 5 Journaled HFS+ partitions in my external hard disk.
Before this problem exist; I selected the fourth partition which capacity is 56GB, and choose 'Erase' with as a disk type 'MS-DOS File System' with Mac OS 10.4.11. But Disk Utility failed in 3 seconds, and gives an error. Then all my 5 HFS+ (Journaled) partitions stopped mounting and is not even recognized by Disk Utility which says no partition map found, and drive is unformatted. And isn't even recognized in Disk Utility which shows only disk name.
I think my apple partition map table corrupted by Disk Utility. All my data still in hard disk, but I don't know how can I mount them again. Disk Utility's verify and repairs buttons doesn't appear for Samsung HDD in Tiger & Leopard. I used some applications for repair my hard disk and partitions. But all of them are failed. Desperately seeking a way to repair or recreate corrupted Apple partition map.
Please, could you help me for mounting my 5 partition in my hard disk. How can I have got my all data again?
my macbook was stolen. there is a way to recover it or the data / files?
Info:
macbook pro, Mac OS X (10.6)
I have a clients compy they reformated it and killed their data... if i usb their drive?
I tried researching but can't find my answer...
A friend emailed last night saying he had a drive that had been 'acidentally formatted' (that's a lot of accidental mouse clicks if you ask me), that it took 2 seconds to format so it should have not actually wiped any data on there.
I've used Disk Warrior in other circumstances but never tried on an initialised drive. Nor would I know how to get a copy of such old software.
Does anyone have any ideas as to what software from that time might recover the data?
Long story short I dropped my 500GB Maxtor external HD (which is really just an internal HD in a chase). The drop was about 3 ft. It was not on so I don't think there will be much damage to the disk, but it no longer mounts. I was wondering if anyone could think of a way to get the disk to mount so I can recover files saved to it. I have Tech Tools, and Data Rescue II to recover the drive but as long it is not being recognized by the computer those applications are useless.
View 2 Replies View Relatedmy imac crashed last week but thankfully i had back up of all my files via my western digital my studio hard drive. thankfully right? well i royally screwed up and while trying to fix my crashed hard drive on my imac, i guess i accidentally reformatted my external drive, deleting EVERYTHING
I am pretty sure that I can go to a vendor and have them restore the HD correct? If so, what does something like that cost? I had probably 50 gigs lost, mostly photos, MP3, AVIs, and programs.
How to recover data from a mistake overwrite files???
I used a macbook pro with Snow leopard 10.6.1. It was an accident, I copy all files in folder from Ext. HDD to a folder in macbook.
But I've made mistake. A name of folder on Ext. HDD was same as a name of folder on my macbook. While I'm busy, It was an accident. I push enter button to overwrite data.
A 7 GB folder has changed to approx. 2 GB folder.
In this case, Does anyone know how to recover my data. It's an important data, I've done it for a year.
I tried to use data rescue 3.0 and file salvage. But a search result of these 2 programs show me some thing such as 'Pic001 to Pic15555' , 'autocad 001.dwg-autocad 30000.dwg' ,001.pdf-11234.pdf'.
My hardisk is 250 GB but a search result is 300++ GB. I can't find a file that I want to use.
In this case, Is there any program that easy to recover my data???
An external hard drive, 4TB Iomega...connected via eSATA cable...had a power outage and the drive won't be read by OSX now. (Yes, it was on a surge protector and no I did not have a backup. I was actually preparing for the process of creating a backup when the power went out!) Anyway, I have tried using Data Rescue 3 and DiskDrill to try and recover data from the drive. I can recover the first 1/3 of the drive, but it ejects when either app tries to access the bad block. how/what software to use to recover the data? I know there are programs that will avoid the bad block but I've only found them for Windows. Are there any that will do such a thing in Lion? I can not afford a data recovery service. Trying to do this on my own.
Info:
Mac Pro, Mac OS X (10.6.8), early 2008, 2 quad-core Intel Xeon
How do I recover ALL my data using Time Machine?
Info:
MacBook Pro, Mac OS X (10.6.8), New Hard Drive
