OS X :: Trackpad And Keyboard Malfunctioning After Waking Up From Sleep?
Aug 14, 2009
Okay, I closed my display on my MBP and it went to sleep then about ten minutes later I came back to it to check my mail and when I opened it back up it came out of sleep mode the normal dialogue box came up asking for my password and when i typed it in only every third key press was registered. So I just had to be persistent and i was able to enter in my password and it worked, however then it went to my desktop and I went to open mail and the trackpad wasn't working at all. I used spotlight to open activity monitor and check to see if something wasn't responding but everything looked fine, then after that I then force quitted activity monitor and relaunched finder and the trackpad still didn't work so I just restarted and now everything is fine but I am wondering what happened because I would prefer this to not happen when I really need to use my computer, So does anyone have any ideas of what might have gone wrong.
View 1 Replies
ADVERTISEMENT
Mar 23, 2012
After installing 10.7.3 when waking from sleep magic trackpad sometimes freezes. If I then I use a mouse the magic trackpad starts working.
Info:
Mac mini, Mac OS X (10.7.3)
View 2 Replies
View Related
Feb 26, 2010
I'm well sure this topic has come up before, but I've never seen it answered.
After waking my Mac mini from sleep, my keyboard won't respond at all. I tried:
- Plugging it into a different USB port, including the one on my monitor
- Using the mouse to wake the computer up from sleep instead of the keyboard
- Switching to a different, wired keyboard (had a wireless before)
Both keyboards used were off-brand (non-Apple) keyboards, but I've had a couple before these two that never had a problem whatsoever.
View 6 Replies
View Related
Sep 10, 2009
I have a brand new MBA with the 128 SSD and am running Snow Leopard. I also have a 23" cinema display. My usual approach is to connect the MBA to my external keyboard and the display and then turn it on. It boots just fine and I end up with dual display (cinema and MBA). I then close the lid and the machine goes to sleep. Clicking on the mouse or keyboard NEVER wakes it up. Unplugging and replugging the USB keyboard sometimes wakes it, but not often. Doing the same with the monitor makes it turn off and on and off an on. My goal is to boot the machine, close the lid, and use the external display only, but it just won't do it without a lot of guesswork and fuss. I have searched this forum and the help forum and not seen this identical problem. Am I missing a setting or doing something wrong here?
View 3 Replies
View Related
Dec 2, 2014
Since installing Yosemite I'm seeing a random issue where, after waking my Macbook from sleep, keyboard input is not possible. I can move the mouse using the trackpad, and applications all appear to be running as normal. I can quit applications from the dock also using the trackpad. When trying to type anything I get the 'bong' sound as if input is blocked. The only fix I've been able to find is either to ssh in from another machine and force a restart, or to force a power off using the power button.Â
I've tried searching the console logs and can't find anything relevant happening at the point this fails. I've also considered that it could be any number of applications misbehaving, but having quit everything running that is visible in the dock, keyboard input still isn't possible.Â
Info:
MacBook Pro with Retina display, OS X Yosemite (10.10.1)
View 1 Replies
View Related
Dec 12, 2010
So, sometimes when I wake my SR 2007 15" MBP from sleep, the keyboard and trackpad are unresponsive and I have to reboot several times before they work. I googled the problem and looked around here and didn't find any solutions.
View 4 Replies
View Related
Jan 4, 2009
I just got back from an 8-day long trip to mainland China and when I got back I realized that I had left my MBA unplugged and in sleep mode. When I came back, I opened the lid and found that hitting the keys on the keyboard didn't work. Then I realized that the battery was probably completely out of charge. After I plugged it in, I opened the lid again and hit the power button.
The device powered up but after it got to the login screen I could not type my password in or move the cursor. I tried plugging in a USB mighty mouse but it still wouldn't register. I was replacing some of the USB driver files on the MBA before I left and I think that might be the problem. How do I fix this if there's no network boot or firewire? I think my warranty might be voided too because it's had a few nasty bumps but I don't think that's what's causing the problem.
View 2 Replies
View Related
Dec 3, 2014
After a few hours of uptime, certain keys on my keyboard stop working and I have to reboot: both command keys and the zero key. Sometimes, after the computer has been in sleep a long time, the keyboard and mouse don't respond at all. I can get the computer to wake up again by pressing the power key, but the mouse and keyboard don't respond, so I can't do anything except hard boot. This problem first appeared after the update to 10.10.1. (I'm dealing with it right now, so I'm getting the '0' through the keyboard viewer, but there's no way to access that from the password screen.)
Info:
MacBook Pro (15-inch Early 2008), OS X Yosemite (10.10.1)
View 3 Replies
View Related
Apr 17, 2012
I got a brand new Macbook Air the other week. I noticed that sometimes, after folding the computer (with the OS running), then unfolding it - the keyboard and trackpad are not responding at the login screen. Actually if I press the keyboard it lights up properly but there is no access to the system. The only thing that works is the power button, so every time I have to power down the computer, then back on again.
Info:
MacBook Air, Mac OS X (10.7.3)
View 14 Replies
View Related
Nov 29, 2010
I have some problems with my macbook alu, sometimes when I wake my computer from sleep they keyboard wont work, or the trackpad. This only happens sometimes and not always. How can I prevent this from happening?
View 1 Replies
View Related
Sep 2, 2014
-OSxÂ
-Processor: 2.4 GHz Intel Core i5
-Memory 4GBÂ
Only the number keys on my keyboard are malfunctioning besides the number 0. For example when I press 1 it appears as q1. When I press 2 it appears as w2. Â
I am not sure if I accidentally pressed something on my keyboard that has changed the functioning of my number keys. I've tried fidgeting with the keyboard settings in System Preferences and holding down the f6 key but nothing has worked.Â
Info:
MacBook Pro, OS X Mavericks (10.9.4)
View 4 Replies
View Related
Nov 29, 2009
There are times when my iMac will wake from sleep for no apparent reason. Sometimes, several times a night. The glare from my screen often wakes me. If I get up and select Sleep again, it performs normally but may wake up again. I have "Wake for Network Access" turned off, so that shouldn't be it.
View 2 Replies
View Related
May 15, 2010
It all started a few weeks ago. Whenever I put my Mac to sleep, most of the time, it immediately wakes up again. (Eventually, the fans would start to spin up, but I solved that by disabling "Sleep hard drives when possible"). Now it's just a matter of how I can put my Mac to sleep, and keep it sleeping until I choose to wake it up. I recently got a new printer hooked up to the network, and originally thought it was the issue, but I don't think so now.
I've tried disabling wake up on network access, Bluetooth wake-up. I tried a Airport connection instead of Ethernet, and have disabled both. I even tried unplugging the Ethernet cable, along with any connected peripherals (except the keyboard). Now, my only guess is that it's a software issue, but I don't know where to start. I would love to see my Mac sleeping peacefully again.
View 8 Replies
View Related
Sep 24, 2008
I am having a problem with my Mac Pro waking from sleep spontaneously at night. It doesn't always do so, but when it does it seems to be at the same time, 00:42. This morning I opened console to see what was going on at this time and this is what I got: [Log] So it would seem that eye tv is the culprit. I then went to open the com.apple.AutoWake.plist in the System Configuration folder and found 2 entries for EyeTV under wakepoweron which correspond to the times listed above (i.e. 09/24/08 00:42:30 and 03/31/32 06:00:00). I have tried dumping the com.apple.AutoWake.plist into the trash and then restarting, but a new file is generated with the same entries, and also opening the com.apple.AutoWake.plist to delete the entries, but then get an error saying I don't have appropriate access privileges to save the file (even when I change privileges under 'get info' to read/write I still get the same error message).
View 4 Replies
View Related
Apr 15, 2007
It wont wake from sleep and after I reboot it, it wont even start. After the chime, the screen stays blank and the fans start roaring high after a few minutes. I brought it to the Genius Bar. They ran diagnostics on it and concluded that the problem is the 3rd party RAM. I then removed the RAM when I got home and it worked for a day. Now, the problem is back. I already reset the the VRAM and the SMU. I'll bring it back today to the Apple Store but I dont know if they will even entertain me this time as they didn't even charge me for running the hardware diagnostics last time.
View 9 Replies
View Related
Mar 7, 2009
i have had the same setup as before (external monitor, apple bluetooth keyboard, mouse) and up until yesterday its been waking up on its own. is there an option to stop usb from waking up the computer since i have my mouse connected?
View 2 Replies
View Related
Apr 13, 2009
I just occasionally have noticed my Blackbook, running 10.5.6, when I open it after closing it and moving elsewhere say, may have lost a lot of it's battery power. I think what's happening is it's not going to sleep properly (or it's waking up) when closed. This of course leaves me with not enough power (today 8% when I opened up). What concerns me much more is that the HD arm might not be in the parked position and damage could result with me travelling around. I have in fact had two complete HD failures in 2 1/2 years (though I have no reason to believe this is the cause, in fact I doubt it). I'm aware I can press the power button then select SLEEP and I often do when I'm just charging at home and want to keep the temp down (it's hot here!). Very interested to know what's going on though.....in fact interested in the bigger picture of HD arms when the things spinning as I use my Macbook outside and on my lap a lot, and can't help some movement of course. I emphasise when I shut the lid it normally sleeps as normal, this is just an occasional thing. So is it dangerous, what's causing it, and what about the bigger pic on HD arms when moving the laptop around?
View 1 Replies
View Related
May 3, 2009
My girlfriends Air has suddenly gotten a weird problem lately. Every now and then when she wakes it from sleep it seems to think that it has a second display connected to it. Even rebooting doesn't always solve the problem.
She has never used an external display with it before. The port looks clean (I thought there might be something there causing a short) and as far as we know there hasn't been any tinkering with any system files on her computer.
Anybody ever heard of this problem before? Or have any idea how to fix it?
View 2 Replies
View Related
Aug 6, 2009
I recently bought a second hand Powerbook G4 1.67. It came without a hard drive so i put a new drive in and installed Leopard on it. The problem, before I upgraded it to 10.5.7 sleep mode would work fine but since the upgrade after waking up from sleep only the mouse will work and the rest of the screen is frozen. Anyone else have this problem or know of a fix?
View 2 Replies
View Related
Sep 30, 2010
And I can hear my Mac Pro waking itself up from sleep every so often. What does this mean?
View 5 Replies
View Related
Mar 28, 2008
I am not sure if this is related to the other wifi issues posted on this thread. I am hoping it is an easy Leopard configuration thing. But my wifi used to work perfect--until I patched my OS version. Now, whenever open the lid, it can never connect to my wifi router immediately like it used to do. It spends cycles hunting, and I end up having to manually go into network preferences and try a few times to connect, including rekeying the password.
View 1 Replies
View Related
Sep 24, 2008
I had this problem since I used the power schedule to shut down my mac a day after I went on vacation. Now every morning I see the macpro awaken from sleep mode. The mouse is in it's stand so it can't be that. I disabled everything in power settings.
View 6 Replies
View Related
Apr 15, 2009
I have a late 2008 macbook, and occasionally after going into sleep via closing the lid or according to the sleep timer, it doesn't really want to wake up. I open the lid/press spacebar and the computer sounds like it's waking up, the keyboard lights up, but the screen stays dark. I've tried waiting for up to 30 seconds before eventually I just hold the power button and hard reset. Upon restart, there is an error message stating that os x crashed. I haven't been able to let it sit for more than a minute or two, as it usually happens when I'm getting ready to give a presentation or something, fun right.
Wed Apr 15 11:28:25 2009
panic(cpu 0 caller 0x001A9C68): Kernel trap at 0x00143b90, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x000003ad, CR3: 0x01879000, CR4: 0x00000660
EAX: 0x00000001, EBX: 0x00000002, ECX: 0x0052ad64, EDX: 0x00000000
CR2: 0x000003ad, EBP: 0x60e3793c, ESI: 0x00000000, EDI: 0x0714f454
EFL: 0x00010246, EIP: 0x00143b90, CS: 0x00000008, DS: 0x0b970010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x60e37758 : 0x12b4f3 (0x45b13c 0x60e3778c 0x1335e4 0x0)
0x60e377a8 : 0x1a9c68 (0x464700 0x143b90 0xe 0x463eb0)
0x60e37888 : 0x1a038d (0x60e378a0 0x0 0x60e3793c 0x143b90)
0x60e37898 : 0x143b90 (0xe 0x52680048 0x60e30010 0x7a40010)
0x60e3793c : 0x767a790 (0x1 0x0 0xb97e650 0x0)
Backtrace terminated-invalid frame pointer 0x2160c8
BSD process name corresponding to current thread: mDNSResponder
Mac OS version:
9G55
Kernel version:
Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
System model name: MacBook5,1 (Mac-F42D89C8)
View 4 Replies
View Related
May 28, 2009
I have a 2.4 Penryn black MacBook. It's been waking up on it's own, overheating and shutting down since I installed 10.5.7. This happened when I first got it, and I took it to Apple. At that time, seems the RAM wasn't seated properly. It hasn't been a problem again until now. Yesterday, it did it twice. The RAM seems to be seated properly. Is there a firmware update or something I'm missing?
View 24 Replies
View Related
Jul 9, 2009
I am trying to access my computer remotely via Logmein however it is either in sleep/suspend mode and the remote software is not active as a result. Anyway I can wake it up and prevent from happening in future?
View 8 Replies
View Related
Jul 22, 2009
I have a 2009 8 cores 2.66Ghz Mac Pro with 16GB RAM and ATI Radeon HD 4870. It keeps waking up randomly from sleep. I have tried quitting all applications before sleeping, but it still woke up from sleep by itself. Anyone has nay idea why it kept waking up randomly?
View 1 Replies
View Related
Mar 27, 2010
Has anyone had this problem?
I have a (reletively) new iMac purchased in Nov. 27" 3.06 Ghz 4 GB Ram. The machine sleeps on it's own overnight from non use and then when i get up in the morning I click the mouse and I hear the machine waking up, (harddirve, cd-rom, etc.) but the screen stays blank. This happens in OSX and Win7 doen't matter what OS is running so it appears to be a hardware issue. Maybe there is a firm ware update, or somthing. To use the machine at that point, my only option is to force the machine to shutdown and then reboot. If I reboot to fast, meaning if I don't wait about 5-10 seconds after the shutdown, then the machine proceeds to boot but without any visuals, the screen stays blank.
Should I just take the system back to the apple store? Will they grab the current image and put it on a new machine...
View 18 Replies
View Related
Apr 23, 2010
Everytime I put my Mbp to sleep it will wake up after 10 minutes on it's own all the time, I don't have low batteries on my magic mouse and keyboard, this never happened on my older Mbp. This is the new 2010 model. I have wake for network connection turned off. Anyone esle have this issue?
View 10 Replies
View Related
Jun 6, 2010
I almost always put my iMac to sleep every night. Ever since about a week ago it started waking up, and waking me up, in the middle of the night. And yes in that week I have tried shutting down and it still does it the next day.
I don't have any apps open that I don't normally, didn't change any settings i'm pretty sure.
I tried the list from apple that lists reasons it would wake unexpectedly and googled but nothing works.
View 8 Replies
View Related
Aug 8, 2008
I own a 15" screen Macbook pro running Mac OS X version 10.4.11 with a 2.33GHz Intel Core 2 Duo. Memory - 2 GB 667 MHz DDR2 SDRAM. Recently when waking the computer from sleep, it makes the "waking from sleep noise", and the fan starts, but the screen stays black. This forces me shut it down. When it restarts, the error message is that the computer had to restart after Mac OS X quit unexpectedly. I'm usually using Garageband, iTunes and Firefox before putting it to sleep. I'm not sure where I've put the documentation I need for support from Apple!
View 1 Replies
View Related
