I am trying to access my computer remotely via Logmein however it is either in sleep/suspend mode and the remote software is not active as a result. Anyway I can wake it up and prevent from happening in future?
View 8 RepliesAnd I can hear my Mac Pro waking itself up from sleep every so often. What does this mean?
View 5 Replies View RelatedI had this problem since I used the power schedule to shut down my mac a day after I went on vacation. Now every morning I see the macpro awaken from sleep mode. The mouse is in it's stand so it can't be that. I disabled everything in power settings.
View 6 Replies View RelatedI was wondering if anyone knew how I can wake up my computer when it's asleep or on the screen saver not with a password, but with a sound like a short whistle tune or something along those lines.
View 4 Replies View RelatedI'm using my Mac on an external monitor with a USB keyboard/mouse and the lid closed. When I put it to sleep using the remote, it switches off but then re-awakens about 5 seconds later. It's really annoying as it's usually when I'm in bed after watching a video and am too tired to get up and switch it off manually. How to make it sleep? Could it be the USB peripherals making it act this way? If so, how can I stop my Mac from waking on USB?
View 10 Replies View RelatedWhenever I close my computer to put it to sleep and then open it up later, the computer freezes and I am unable to type in my password to unlock my computer and am forced to hold down the power button until it turns off and then reboot it. This has become a major pain and has only started today but has happened 3 times already. I have an Apple Bluetooth Keyboard and a Magic Mouse connected to my computer and am running 10.6.2 if that helps. I'd rather not have to shut down my computer all the time and I'm no longer covered by any protection.
View 14 Replies View RelatedI'm on my third MacBook Pro and all three of them keep waking up from sleep mode. I have reformatted and reinstalled the OS each time. I have reset the SMC and the PRAM. Still no resolution. It happened again this morning and I started digging thru the Console logs. I found this.
10/29/08 8:33:11 AM kernel Wake reason = OHC2
Can someone please tell me what the OHC2 code means? I have no idea where to find the documentation on these codes. If I wake my computer up from sleep by pressing the power button, the Wake reason code is PWRB.
The AirPort on my new iMac 21.5'' 4670 is having problems these past couple of days. Every time I put the machine to Sleep and wake it up again, the AirPort cannot find any network. My wireless is fine and there are other wireless networks the machine can detect when it functions well. I have to restart the computer to have the AirPort work properly again. I thought it was a temporary issue, but after repeating a couple of times, it seems to be very easily recreated. And sometimes the AirPort does not function even from a restart. I have to restart another time to have it work.
Does anybody else have the similar problem? I hope it's just a software problem that will be addressed in 10.6.2.
(I posted here because it never happened on my other Macs before.)
when i wake my 13' mbp up from sleep mode, there is no sound, i have to reboot it to get the sound back, does everyone know where the problem is? and how to deal with it?
Info:
Mac Pro, Mac OS X (10.7.3)
After waking up from sleep mod,it won't accept log in password
Info:
MacBook Air
the topic pretty much says it all. i put my mbp to sleep last night and this morning when i opened it to wake it up, i heard the trash sound go off, and i realized my counter strike source icon was missing. i opened the trash and their it was. strange...i don't know if it may have been some of the sites i've visited in the past that may have given me spyware or anything sketchy. anyone had this issue before?
View 4 Replies View Relatedmy mbp i7's double tap doesn't save when i set it to a certain "double-click speed" so when i put my mbp to sleep or restart it, i'm forced to go back to the settings and set my double-click speed again. The point of me doing this is because for some reason, my double-click doesnt register or hi-light the text in the URL or text in essays etc. when its set up to the fourth notch on the slide bar. so i have to put it down to 0 on the bar in order for my double tap to register. Its really annoying to have to redo this every time i come back to my mbp.
View 1 Replies View RelatedWhy does the computer show disk improperly ejected error message after waking from sleep mode? Hooked up external WD sata HD for itunes and getting this message more than a few times. What to do?
View 5 Replies View RelatedI'm having a problem with my PowerBook G4 where is goes into sleep mode at random times. Mostly when I am streaming video..or at times the fan comes on, it sounds super high then boom. sleep mode again. After hitting the space bar, it comes back on, but it'll happen again shortly after. I've played with the sleep settings
View 5 Replies View RelatedAs of last night, my MBP started acting very strangely. After entering my username and password, it would enter the desktop for a short period of time and then kick back into sleep mode; the screen would turn back to black. Sometimes it will let me stay on the desktop for a long time and other times it will hardly let me stay on the desktop. I called apple support and they had me start the computer in safe mode; even then it occasionally kicks me out.
The tech guy said that it was a "strange software issue" and not a hardware issue. I thought it was a hard drive issue; my hard drive makes an odd sound when it unlocks (a grinding sound), but it has been doing that for quite some time with no issues. I tried to reset the SMC and it didn't do anything.
How should I remedy this problem? Is this a hard drive issue? Hard drive failure? Has the grinding sound finally caught up with me? I am running OS X; not leopard or snow leopard. I know I need to upgrade, but this shouldn't be happening.
There are times when my iMac will wake from sleep for no apparent reason. Sometimes, several times a night. The glare from my screen often wakes me. If I get up and select Sleep again, it performs normally but may wake up again. I have "Wake for Network Access" turned off, so that shouldn't be it.
View 2 Replies View RelatedIt all started a few weeks ago. Whenever I put my Mac to sleep, most of the time, it immediately wakes up again. (Eventually, the fans would start to spin up, but I solved that by disabling "Sleep hard drives when possible"). Now it's just a matter of how I can put my Mac to sleep, and keep it sleeping until I choose to wake it up. I recently got a new printer hooked up to the network, and originally thought it was the issue, but I don't think so now.
I've tried disabling wake up on network access, Bluetooth wake-up. I tried a Airport connection instead of Ethernet, and have disabled both. I even tried unplugging the Ethernet cable, along with any connected peripherals (except the keyboard). Now, my only guess is that it's a software issue, but I don't know where to start. I would love to see my Mac sleeping peacefully again.
I am having a problem with my Mac Pro waking from sleep spontaneously at night. It doesn't always do so, but when it does it seems to be at the same time, 00:42. This morning I opened console to see what was going on at this time and this is what I got: [Log] So it would seem that eye tv is the culprit. I then went to open the com.apple.AutoWake.plist in the System Configuration folder and found 2 entries for EyeTV under wakepoweron which correspond to the times listed above (i.e. 09/24/08 00:42:30 and 03/31/32 06:00:00). I have tried dumping the com.apple.AutoWake.plist into the trash and then restarting, but a new file is generated with the same entries, and also opening the com.apple.AutoWake.plist to delete the entries, but then get an error saying I don't have appropriate access privileges to save the file (even when I change privileges under 'get info' to read/write I still get the same error message).
View 4 Replies View RelatedIt wont wake from sleep and after I reboot it, it wont even start. After the chime, the screen stays blank and the fans start roaring high after a few minutes. I brought it to the Genius Bar. They ran diagnostics on it and concluded that the problem is the 3rd party RAM. I then removed the RAM when I got home and it worked for a day. Now, the problem is back. I already reset the the VRAM and the SMU. I'll bring it back today to the Apple Store but I dont know if they will even entertain me this time as they didn't even charge me for running the hardware diagnostics last time.
View 9 Replies View Relatedi have had the same setup as before (external monitor, apple bluetooth keyboard, mouse) and up until yesterday its been waking up on its own. is there an option to stop usb from waking up the computer since i have my mouse connected?
View 2 Replies View RelatedI just occasionally have noticed my Blackbook, running 10.5.6, when I open it after closing it and moving elsewhere say, may have lost a lot of it's battery power. I think what's happening is it's not going to sleep properly (or it's waking up) when closed. This of course leaves me with not enough power (today 8% when I opened up). What concerns me much more is that the HD arm might not be in the parked position and damage could result with me travelling around. I have in fact had two complete HD failures in 2 1/2 years (though I have no reason to believe this is the cause, in fact I doubt it). I'm aware I can press the power button then select SLEEP and I often do when I'm just charging at home and want to keep the temp down (it's hot here!). Very interested to know what's going on though.....in fact interested in the bigger picture of HD arms when the things spinning as I use my Macbook outside and on my lap a lot, and can't help some movement of course. I emphasise when I shut the lid it normally sleeps as normal, this is just an occasional thing. So is it dangerous, what's causing it, and what about the bigger pic on HD arms when moving the laptop around?
View 1 Replies View RelatedMy girlfriends Air has suddenly gotten a weird problem lately. Every now and then when she wakes it from sleep it seems to think that it has a second display connected to it. Even rebooting doesn't always solve the problem.
She has never used an external display with it before. The port looks clean (I thought there might be something there causing a short) and as far as we know there hasn't been any tinkering with any system files on her computer.
Anybody ever heard of this problem before? Or have any idea how to fix it?
I recently bought a second hand Powerbook G4 1.67. It came without a hard drive so i put a new drive in and installed Leopard on it. The problem, before I upgraded it to 10.5.7 sleep mode would work fine but since the upgrade after waking up from sleep only the mouse will work and the rest of the screen is frozen. Anyone else have this problem or know of a fix?
View 2 Replies View RelatedI am not sure if this is related to the other wifi issues posted on this thread. I am hoping it is an easy Leopard configuration thing. But my wifi used to work perfect--until I patched my OS version. Now, whenever open the lid, it can never connect to my wifi router immediately like it used to do. It spends cycles hunting, and I end up having to manually go into network preferences and try a few times to connect, including rekeying the password.
View 1 Replies View RelatedI have a late 2008 macbook, and occasionally after going into sleep via closing the lid or according to the sleep timer, it doesn't really want to wake up. I open the lid/press spacebar and the computer sounds like it's waking up, the keyboard lights up, but the screen stays dark. I've tried waiting for up to 30 seconds before eventually I just hold the power button and hard reset. Upon restart, there is an error message stating that os x crashed. I haven't been able to let it sit for more than a minute or two, as it usually happens when I'm getting ready to give a presentation or something, fun right.
Wed Apr 15 11:28:25 2009
panic(cpu 0 caller 0x001A9C68): Kernel trap at 0x00143b90, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x000003ad, CR3: 0x01879000, CR4: 0x00000660
EAX: 0x00000001, EBX: 0x00000002, ECX: 0x0052ad64, EDX: 0x00000000
CR2: 0x000003ad, EBP: 0x60e3793c, ESI: 0x00000000, EDI: 0x0714f454
EFL: 0x00010246, EIP: 0x00143b90, CS: 0x00000008, DS: 0x0b970010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x60e37758 : 0x12b4f3 (0x45b13c 0x60e3778c 0x1335e4 0x0)
0x60e377a8 : 0x1a9c68 (0x464700 0x143b90 0xe 0x463eb0)
0x60e37888 : 0x1a038d (0x60e378a0 0x0 0x60e3793c 0x143b90)
0x60e37898 : 0x143b90 (0xe 0x52680048 0x60e30010 0x7a40010)
0x60e3793c : 0x767a790 (0x1 0x0 0xb97e650 0x0)
Backtrace terminated-invalid frame pointer 0x2160c8
BSD process name corresponding to current thread: mDNSResponder
Mac OS version:
9G55
Kernel version:
Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
System model name: MacBook5,1 (Mac-F42D89C8)
I have a 2.4 Penryn black MacBook. It's been waking up on it's own, overheating and shutting down since I installed 10.5.7. This happened when I first got it, and I took it to Apple. At that time, seems the RAM wasn't seated properly. It hasn't been a problem again until now. Yesterday, it did it twice. The RAM seems to be seated properly. Is there a firmware update or something I'm missing?
View 24 Replies View RelatedI have a 2009 8 cores 2.66Ghz Mac Pro with 16GB RAM and ATI Radeon HD 4870. It keeps waking up randomly from sleep. I have tried quitting all applications before sleeping, but it still woke up from sleep by itself. Anyone has nay idea why it kept waking up randomly?
View 1 Replies View RelatedI'm well sure this topic has come up before, but I've never seen it answered.
After waking my Mac mini from sleep, my keyboard won't respond at all. I tried:
- Plugging it into a different USB port, including the one on my monitor
- Using the mouse to wake the computer up from sleep instead of the keyboard
- Switching to a different, wired keyboard (had a wireless before)
Both keyboards used were off-brand (non-Apple) keyboards, but I've had a couple before these two that never had a problem whatsoever.
Has anyone had this problem?
I have a (reletively) new iMac purchased in Nov. 27" 3.06 Ghz 4 GB Ram. The machine sleeps on it's own overnight from non use and then when i get up in the morning I click the mouse and I hear the machine waking up, (harddirve, cd-rom, etc.) but the screen stays blank. This happens in OSX and Win7 doen't matter what OS is running so it appears to be a hardware issue. Maybe there is a firm ware update, or somthing. To use the machine at that point, my only option is to force the machine to shutdown and then reboot. If I reboot to fast, meaning if I don't wait about 5-10 seconds after the shutdown, then the machine proceeds to boot but without any visuals, the screen stays blank.
Should I just take the system back to the apple store? Will they grab the current image and put it on a new machine...
Everytime I put my Mbp to sleep it will wake up after 10 minutes on it's own all the time, I don't have low batteries on my magic mouse and keyboard, this never happened on my older Mbp. This is the new 2010 model. I have wake for network connection turned off. Anyone esle have this issue?
View 10 Replies View Related