I am new to all this so if it's a stupid question I'm sorry. Whenever TM does it's thing it puts a icon my desktop called backup of blablabla. Usually they disappear when its done. This time it didn't. What am I supposed to do with it? Why do they show up and should I have been moving them all along?
I have a Time-Machine backup on one of my external HD's. It's a backup of my old MBP system. I'm using my Mac Pro now and I wish to delete all the files which I don't need from the backup. Why does it not let me delete anything? It says I do not have enough permissions or something.
I just bought an external hard drive and am using it to back-up my MacBook Pro with Time Machine. Both my MBP hard drive and external hard drive are 500 GB, but I noticed that my MBP HD has 85 GB of files on it while my back-up HD only has about 70 GB. I just want to make sure all of my files are backed up properly.
View 1 Replies View Related
I recently used time machine for the first time in a long time. I use my external HD USB for the backup. After the back up was complete, I unplugged the USB cable. I got an error that I needed to put the HD away first (I wasn't thinking). And I didn't pay attention to the error either.
I thought the data was gone, when I didnt see the data in the back up file. I do see the back up file with that date on it. In the file is the .InProgress file. In that file, on right clicking, I see the contents of one folder. This folder has a very long name of numbers and letters. It shows no contents in the finder. THough I know the files must be here. The HD has capacity of 100 Gig. There is only about 20 gigs showing on it. Though there is only 20 gigs available. So, my back up data is there on the HD, and I assume it's in this "empty" file.
* How do I extract the saved files ?
I reinstalled OS X Leopard, restored from my Time Capsule, and now when it's backing up it wants to create a new file when I have a 200GB+ file already saved. How can I get it to start using that 200GB+ file and only saving the edits like before? (Please don't make me delete the 200GB file and backup everything again. )
View 1 Replies View RelatedI bought a larger Time Machine hard drive and now I need to copy the old Backups.backupdb file onto the new drive.
Whenever I try to do so it gives the message "The backup can’t be copied because the backup volume doesn’t have ownership enabled.".
How, exactly, do I "enable ownership"?
Info:
Mac Pro, OS X Mavericks (10.9.4)
The following error message appears when I attempt backup using TM;
"You do not have appropriate access privileges to save file ".0019e33d49f6" in folder "Time Machine Backups".To view or change access privileges, select the item in Finder and choose File > Get Info."
Spotlight can't locate this file, I've ran disk utility to verify and repair the internal drive, verified the external, no problems on both counts. I even tried allowing read & write privileges temporarily to everyone on both drives, but no luck.
How do I delete all versions of a file (eg, a mail attachment containing a virus) from a Time Machine backup?
Info:
iMac Intel, Mac OS X (10.6.3)
I'd like to keep one backup of a particularly large file in Time Machine, but all the incremental backups are taking up a ton of room. I've read how you can delete all backups of one file, and all files in one backup. But can you delete one file in one backup?
View 4 Replies View RelatedI have a file I alter once about a week, each time I alter it I save it as a new one, with a date included in the name.So I have a series of files something like
xxxxx march 13.numbers
xxxxx march 07.numbers
xxxxx march 01.numbers
etc.
This morning when I updated and saved the march13 file I accidentally saved it as xxxxxx march 13, not xxxxxx march 20 which it should have been. No problem, go into time machine and retrieve the march 13 file I thought.Its not there. Its not there from just before the save to any time it should be there !
Luckily I was able to retrieve it as I also have a once a week online backup so I went into the last one of those and retrieved "xxxxxx march13" which proves it did exist, it has a creation date of march 17 but if I look at TM for march 18 its not there - why isn't it in my time machine backup?
All the other files in that folder are as expected so the only thing that makes any sense to me is that TM hasn't been backing up over the past week or so but TM error logger shows no errors.
i have a case where i have a large file (a sparse disk image) which at some point in the past seems to have become corrupt in the sense that there were problems reading it.eventually, i realized that attempts to clone the drive containing the bad file were failing (super duper reporting an error).an attempt to finder-copy the disk image also failed.i went to find backup copies of the file in question in my time machine backups and realized that the file did not exist in my backups.digging through system logs, i discovered that when time machine encountered an error when reading the file, it was failing silenty - that is, no error was reported via time machine - backups were seemingly completing successfully.so as a result, i went quite a long time with no backup of the failing file, nor any obvious warning that it was failing, even though time machine was encountering an error every time it tried to backup the file.
this seems like a major problem, perhaps even a design flaw in time machine.in fact, it is really the extreme opposite of the behavior i would consider "reasonable" for a reliable backup program.i somehow misinterpreting the data? any guess as to why time machine would not report when it tried to read a file during a backup, but failed?
Info:
Mac OS X (10.6.7)
I excluded for one TM backup a sparse bundle disk image that I have been backing up regularly. I then immediately removed the sparse bundle disk image from the TM exclusions list, and now TM wants to back up the entire sparse bundle disk image, which contains an iPhoto Library (80GB). It seems that TM does not "see" the previous disk image backups.
Info:
iMac, OS X Mountain Lion (10.8.5), 21.5-inch, Late 2009
I would to upgrade my OSX form 10.6.8 to Mavericks and I have already downloaded installing files. I have already checked the compatibility of most important apps I'm using and there are not problems about these. I have some questions:upgrade or new installation? with the new os can I recover a file from Time Machine backup produced with Snow Leopard?
View 2 Replies View RelatedI have looked into this a lot already. It is to much that Time Machine backs up every single hour! It would be nice to set it to something like 3 or 5 hours. I have tried a 3rd party app to do this, but... If my computer was off or asleep when it was supposed to back up, it would get an error. It would not just do the backup when i turned it on or when it came out of sleep like stock Time Machine does. I have also seen a way to change the time incraments in the Terminal.(I am very good with it, not a noob) I have tried this and it screws up time machine completely. Maybe it does not work with the newest OS X. By the way... I have a 2010 MacBook Pro, got it 2 months ago.
Does anyone know a solid 3rd party app, that will work seamlessly. Or has anyone changed the time in Terminal and are currently using something different than 1 hour. There is a lot of examples online, but I would like the codeing that you literally used.
I recently bought a1tb USB HDD . When I connect this to my late 2012, 27" 2.9Ghz Mac my Time Machine 2tb USB HDD disappears.
When I remove the 1tb USB HDD the Time Machine repairs. I have checked Finder and Disk Utility and it does not show there either.
How i can stop this from happening?
Info:
iMac, OS X Yosemite (10.10.1), iMac (27-inch, Late 2012), 2.9 GHz I
I am getting the following error from Time Machine when doing my first backup. The startup disk being backed up, and the TM disk are both the same size.
Macintosh HD: 465.44 (total); 393.99 (free); 71.45 (free)
Time Machine: 465.44 (total); 465.29 (free)
The Time Machine error is: Quote:
"This backup is too large for the backup volume. The backup requires 472.7 GB but only 465.3 GB are available." why would this be? Other disks are excluded from the backup, and Time Machine is telling me that it needs more space than it actually needs. What should I do?
I've notice that when time machine does a backup to an external drive it creates a file "image backup" I would like to know why is this file empty? I've check through all my backups and everytime this file appears to be empty.
Also when Time Machine does a backup of your computer, then all the photos from photobooth should appear in the photobooth library file right?
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.3)
Time machine failed in progress as my hard drive failed. I have an "in progress" file on my external harddrive that is about 160 GB. I would like to try and load this back onto a new harddrive. Migration assistant is not responsive nor does Time Machine recognize the external drive when connected.
Info:
iMac, Mac OS X (10.6.8)
I was a PC user who recently moved to mac. I have a macbook (intel 2.2GHz, 2GB RAM, 250GB HDD). When I was using PC, I backed up all my data to a network storage device (Buffalo LinkStation 250 GB connected to a 802.11g netgear router which is supplied by Sky) using a program called SmartSync Pro, which worked very well. Although I can connect to and mount the Share folder on this drive when the macbook is connected to the network, Time Machine will not back up to it. It wouldnt even recognise the disk on the network.
So I went onto the trusty internet, and found that you can get time machine to recognise the Share folder. (This was obtained from: http://blog.imulus.com/george/software/using-leopard-time-machine-to-backup-of-a-network/)See my comment on their page at the bottom, number 66.
It recommended entering the following in to the Terminal: defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
Before attempting backup I have to go into "Network" and select the Share folder by double clicking on it. This seems to mount the volume. After this, it can be seen in Time Machine as a potential backup destination.
However, this method does not work for me. Time Machine "prepares" for a while, then gives the following message: Time Machine error. The backup disk image could not be created.
More internet searching took me to macosxhints which suggests creating something called a sparsebundle image on my local system. (http://www.macosxhints.com/article.php?story=20080420211034137) Have not tried this yet as I thought it would be prudent to seek some help first.
Apple have deliberately disabled the ability for Time Machine to back up to network attached storage, (except of course to their proprietory Time Capsule):
Is this because time machine requires a network faster than 802.11g?
Is this because a time machine backup to a network attached storage device is unreliable and the data is corrupted?
I dont want to shell out more cash for a time capsule. I would prefer not to have to hardwire to an external drive (which I will also have to go out and buy). Any thoughts?
I just purchased a Seagate 3 TB USB 2.0/3.0 external drive to use as my time machine backup drive. I have a MacBook Pro that was purchased about 3-4 years ago. The MacBook Pro has a 120 GB hard drive and is currently running MAC OSx 10.6.8. I also have another WD 1 TB FireWire external drive that I use to store all of my media files.
After I followed the instructions for installing the new Seagate drive for use with the MAC OSx, I initiated a time machine backup. It very quickly determined that it needed to back up almost 900,000 files totaling just about 400 GB. It started the backup process at a rate of about 1 GB per minute. In a little less than an hour it reach 53 GB and remained there for an additional two hours before I decided to stop the backup.
Once I got the backup stopped, I deleted the backup and decided to look at my energy saving settings. I noticed that the "Put drives to sleep whenever possible" check box was checked, so I unchecked that option and restarted the MAC. I then initiated the time machine backup again. Like the first time it quickly determined that it needed to backup the same amount of data as before and started the backup process at a rate of about 1 GB per minute. Before going to bed at around 11 PM last night it was at about 60 GB so I thought I was out of the woods (having gotten further than the 53 GB earlier). When I woke up this morning at 5:30 AM it was sitting at 69 GB.
I am really frustrated at this point and don't know why the time machine back up would be failing on a brand new hard drive. PS - I was previously using a Seagate 1.5 TB USB drive as my time machine backup and never had any issues with it. I decided to use the 1.5 TB drive for a different purpose, which is why I have the new 3 TB drive to use as a backup. And I still have the full backup on the 1.5 TB drive just in case anything were to go awry.
Info:
MacBook Pro, Mac OS X (10.6.8)
I have a external HD which has always worked fine under snow leopard. Since upgrading to lion I keep getting the following message The identity of the backup disk has changed since the previous backup.The disk may have been replaced or erased, or someone may be trying to trick your computer into backing up to the wrong disk. And after this the drive disappears from the desktop appearing agian only after restart. What can I do do rectify this? Delete and re-intialise the drive?
Info:
MacProQuad2.6 4gbRam, Mac OS X (10.4.8)
Just wanted to check if he problem was unique to my MBA (Rev B, HDD) or you notice it too ;
My Time Machine backup takes up to 6 hours to do a backup of about 30GB. And each backup size is 31.5GB everytime !!
I have the following Config - 80 GB for OSX (53GB Free) and 40 GB (10GB Free) for Win 7 on Bootcamp. Sometimes I wonder if TM making a backup of Win 7 also everytime. (Does it mean - In a way its good, that means I should be able to restore the entire hard disk from TM including Applications, Win 7 , bootcamp and all the programmes installed in Win 7 in case I have a problem ?)
But the speed should still be fast... 6 hours to do a 32GB backup is torturous specially because then I have to leave the machine alone and cannot use it.
Is there a way to make a backup of your Time Machine backup on a 2nd hard drive? I want to be doubly sure that my data is backed up!Right now I get an error saying that the second hard drive isn't authorized to copy my Time Machine data from the original hard drive I have set up as my Time Machine.
Info:
iMac, Mac OS X (10.7.3)
I just replaced my HD on my 15"MBP. The install went well until restoring my data from Time Machine. The apps came over fine but none of my data did. Yes, I checked all the boxes on the "restore from backup" menu.
Of course now when I start up time machine the backup isn't there. How do I get Time Machine to recognize the backup? I have it on two places - a time capsule and a separate external HD.
I just replaced the stock 160GB HD in my unibody macbook with a WD Blue Scorpio 640GB HD. I used Super Duper to clone the old drive to the new one, approximately 115 GB.
Now Time Machine wants to backup the full 115GB to my Time Capsule, which kinda sucks because it's going to be a redundent backup that's gonna take up over a 10th of my TC's space. Is there any way to avoid this and still use Time Machine?
I have a 1tb external for time machine back up and have about 750 gb of stuff to back up. I was under the impression that when time machine backs up my stuff it will automatically delete the oldest backup to create room for the newer backup.
My problem is that i did a back up a couple weeks ago and then today i go to back up and it tells me back up failed only 718gb available for 740gb of stuff to back up
anyone have this problem? how can i fix it?
Well TM is acting up. I get an error that reads: "This backup is too large for the backup volume."
Both the internal boot disk and the external baclup drive are 1TB. The internal one has a two partitions, the OSX one that is 900GBs and a 32GB NTFS one for Boot Camp. The external drive is a single OSX Extended part. that is 932GBs.
Both the Time Machine disk, and the Boot Camp disk are excluded from the backup along with a "Crap" folder for temporary large files.
Time Machine says it needs 938GBs to backup only the OSX disk, which has 806GBs in use with the rest free. WTFFF?
This happened after moving a large folder (128GB in total) from the root of the OSX disk over to my Home Folder.
I have reformated the Time Machine drive and have no backups at all of my data and it refuses to backup!!
Why would it need 938GBs of space to backup if the disk has "only" 806 GBs in use??? Is there anyway to reset Time Machine completely???
Some quick screenshots:
my TM wil not back up! It states that this backup is too large for the backup disk. The back up disk requires 573.50 GB but only 225.23 GB are available. The TM needs work space on the backup disk, in addition to the space required to store backups. Upen TM perferences to select a LARGER backup disk or make the backup smaller by excluding file.
Okay I;m sorry but obvioulsy I dont get this. I've never called Apple for help! I have every product they sell practically including Protection Plans I never used and no one will help me with this. My MAC is starting to have black or white screens and i can hear it running but it will not do anything so i have to reboot it, it screws up Enturage and then I have to rebuild that ( 5 times this year) anyway... I would like to back everything up- can I delete everything on the Time Capsule or Time Machine; god I dont even know what it is called Im so MAD... help if you can please. I'm going to have to take this to the genius people at the store and probably buy another computer but like before they will not save my files.
Info:
Mac OS X (10.7.3), time cap or Time Machine
There are 3 macs:
A: an old macbook (the white one)
B: a modern macbook pro (retina)
C: another modern macbook pro (TBD)
I am giving away B now; I expect to get C in 2 months time; I keep A with me all the time.
The goal is to migrate all of the data from B to C. I have Time Machine backups of B.
Since the transition is a long time (2 months), I need to keep working on my data during this period. For this I will use A. This will generate new files, modify old ones, ...
Since A's HDD is much smaller than B's backup, I can move only part of them.
By the way, I have totally erased A and used migration assistant to restore part of my old data from B. So, when I use A now, I do it with my same account as in B (and the same I will use in C).
How do I manage my backups in such a way that, when I will get C, I can safely move all of the data I had in B plus all of the changes and modifications that I have done during the 2 month transition?
Can I just continue to use Time Machine (on A) to update the old backups? I am afraid that some mess could be created because the computers are different (before the backups were taken on B, while now on A), even the present data are different (because now A only contains a subset of the original B data, which I do NOT want to lose), the good point is that the user is the same.
I have an external 500gb drive plugged into my brand new Time Capsule. The 500gb drive basically stores my entire library of music and my iTunes points to this external drive.
Is it possible to have time machine backup all information on the 500gb drive to the time capsule, so encase the external drive takes a dump, I don't loose my entire music library? Maybe time machine is already doing this, I am not sure.
