I have my MacBook Pro hooked up to an external monitor, and was wondering if I can set up spaces so that I can have spaces only operate on the external monitor. Let me explain - lets say I have my browser or a game always open. On the other hand, I only need to look at either my iTunes or iChat on the other screen. Can I have it so that when I switch spaces the monitor which the browser/game is operating on is unaffected, but the other screen switches between iChat in one space and iTunes in another. Is this possible? I tried setting the programs to "every space" but this didn't really make it work the way I'd like. it works for safari, but not for my game. I think that's because the game is in full screen mode. Played around a little more and got it working.
i was wondering if their is any way to use spaces independent of each monitor, meaning that if space 1 was on monitor 1, and space 2 was on monitor 2, i could switch monitor 2 to space 3 while keeping monitor 1 on space 1.
i feel that this will be a better way to use spaces with multiple monitors, rather than many extended desktops.say you want internet work on one space, then different word documents on 2 other spaces. if you could switch between those documents while keeping the internet on the same space.i know that this can be sort of accomplished be setting apps to appear in every window, but that is a hack and annoying solution.this would be a great addition to 10.3 - more customization!
I have a 27" i7. I have a 24" DVI Montior hooked up to it via MDP->DVI adaptor. When the 24" Monitor is on, everything is fine. When I turn the monitor off, the magic mouse tracking on the 27" screen stutters. I am not kidding - it took me ages to figure out that to fix I either need to turn the other monitor on OR disconnect the MDP->DVI adaptor.
I have a G4 powerbook with an LCD that only displays the top 25% of the screen. I've been using an external monitor with it just fine. Today, I reinstalled the OS and ran into a problem. The main OSX startup menu (you know, where it asks for your location, timezone, personal info, etc) is prompting me for information, and I can't see the forms to fill them in! The external monitor defaults to "extended" as opposed to "mirrored", and the forms are embedded, meaning I can't drag them over to my external monitor. Obviously, if I can't fill out these forms and get to the desktop, the laptop is completely useless.
Does anyone know how to force the external monitor to be "mirrored" from startup? Is there a keycommand?
I have been using the latest macbook pro 13.3" since April 2010. Over the last week the monitor suddenly goes completely white and the external monitor goes black. The laptop becomes unresponsive although the programmes opened continue running (e.g a skype voice call would continue without interruption although the monitor is all white).
The only solution at the moment is to press the turn off button for a few seconds then switch the laptop on again. It will then work normally until for no apparent reason this happens again.
I picked up a new MacBook yesterday and I noticed a weird issue when coming out of "monitor sleep" mode, not regular sleep mode.
When I move the mouse, the external monitor shows what you see in the picture, kinda like a TV with no signal. The MacBook screen works fine so what I just do is unplug and re-plug in the DVI plug and everything is good again.
My 24 inch Dell monitor worked fine with my M1330 and other computers so I know it's not that. Does anyone have the same issue or maybe give me some light on this?
Is there a way to use my external monitor as my only monitor when connected to my mbp? Or, can i clone my display, but at separate resolutions? I am able to do this on windows with nvidia software, is there software that allows further customization?
I have a 22" Dell external monitor on my MBP. I know that I just close the cover to my MBP to shut off the screen. What do I do in those instances that I want to use both screens? There has to be something simpler than restarting the MBP?
As said, my current set up is an HDMI - DVI cable (HDMI to monitor and DVI to adapter) and my DVI - mini DisplayPort adapter, everything is connected fine but when I turn on the monitor, it says cable not found... and nothing is displayed on the screen but on the Macbook side of things, it sees the monitor is connected (I can extend the screen and leave the screen) but other than that, it appears I cannot get an image on the monitor, pressing every button on the monitor does not work either.
Any other information that may seem necessary, let me know. I tried clearing my PRAM and clearing the power and such but nothing seems to work.
I've hooked up my Macbook Pro 2009 to my external monitor and everything works. The issue is the mac image on the external monitor is cut off like I can't see the white top bar. Any solutions to fix this issue?
I have a Macbook Pro 2.16 Core Duo, and I'm wanting to install 10.6, but about a year ago, I cracked my screen to the point that I cannot make anything out on it, and haven't replaced it. Instead, I have just been using it in clamshell mode, which has worked out fine so far. My problem is that I cannot get the 10.6 install to show up on my external monitor.
I searched around, and could only find one other similar thread that just ended with the author putting it in clamshell and having it work fine. When I boot to the install and close the screen, I just get a grey box on my external display with a black bar on either side of it. I can't seem to find any other resources, so I'm not entirely sure what to do at this point. Any help would be greatly appreciated.
I've got the older white macbook laptop. Just got delivered was my brand new Dell U2410 monitor (drool) and the adapter from apple that converts mini dvi to dvi-d. The monitor is sitting here and i plug it into my mac via the adapter using the dvi cable provided by Dell and the external monitor displays the default apple background and I can move my mouse around on the screen but that's it. How do I get it to work properly? Do I have to use a separate mouse/keyboard or can I use the macbook keyboad?
I know this is a basic question, but for some reason i just can't seem to figure out how to use my 24" Apple cinema display with my 13" MBP as a second screen. I obviously want to use the 24" display as my main screen (when connected to my 13" macbook) but for the life of me I can't seem to figure out how to use my MBP as a secondary iTunes, etc. screen. I typically use my macbook in "clamshell" mode with my 24" display and when I open the lid of the macbook, it's just black as if the computer was asleep but it fails to wake up when I press any buttons on the keyboard . When I unplug the mini display cable, the external monitor goes black and I'm reverted to using just my macbook. I know this can be done. Does anyone have any experience with the 24" Apple cinema display and MBP?
is it possible to use the screen of a macbook pro as an external monitor for a different device?specifically, I have a mythtv system at home that I want to bring to school, and was wondering if i could get the monitor of the macbook to display the mythtv system (preferably via the VGA connector).
Macbook Pro last years model. I use external monitors alot for video DJing. I normally go DVI to VGA using the adaptor that came with the MBP. The other night I tried a different adaptor- DVI to composite. Now when I go back to the DVI to VGA my external screens have a yellow green tinge to them. I bought a new DVI to VGA adaptor and that didnt help. I calibrated the color profile, detected displays. and still the external screens are a yellow green color. You can still see whatever Im playing but there is definately something wrong with the color.
I need the menu bar on my external monitor for PS and the like, but I'd prefer to the have the dock visible without it cluttering things up, so it'd be great if someone knows how to isolate it to my other monitor.
Is is possible to use MacBook Pro as a External Monitor for a Mac Pro Tower ??If you have a DVI to DVI cable, then would it work connecting the 2 computers together ?
I have a 2.0 white macbook but am thinking of upgrading to a unibody. How do I connect to an (either model) external monitor and can the MB be closed and still be "on". Someone I know told me they had a docking station for their Dell but I'm not really looking to buy more equipment. So I'm looking for suggestions on how to do this.
I have a macbook and i hooked it up to my 37 inch HDTV. I did that with a HDMI to DVI cable and a DVI to Mini Display Port adapter. I plugged the HDMI into my tv and the DVI end into the DVI side of the adapter then the mini display port into my macbook.
I recently installed XP onto my MacBook via Bootcamp, all went well, except, when I try to use my external monitor (acer X223HQ) as the primary display it simply won't let me within windows. I use my Mac with the lid closed and just my monitor with a keyboard and mouse, and want to be able to do the same with Windows too when I need to use it. I've tried fiddling around with the NVidia setup program in XP that came as part of Bootcamp, set it up how I want, but it still doesn't like it.
I'm hooking up an external monitor to my 24" iMac. It's being hooked up DVI, problem is, when it's plugged in, the picture on the Dell monitor I'm trying to use just jutters and shakes. I tried different resolution options and none worked, most just left the Dell monitor black. I calibrated the monitor and that stopped the shaking, but when I look at the monitor everything is too big and there are still tons of "bright" pixels in the background, along with some faint lines..it just isn't right.
I got a fairly nifty AOC 16" USB monitor from TigerDirect.it isn't totally Apple-Quality, but its bright... looks decent at 1366x768... and I got the color of the windows to almost completely match. I would suggest the AOC USB monitor to anyone looking for a cheap way to get a 2 monitor setup. And, it runs from a USB port only... no need to plug it in. Very nice. One drawback of this model is that it does have protrait AND landscape modes... there is a stand on the rear that you twist and can stand the monitor up on its end. However, the Mac drivers don't support this feature! Shucks! I had grandure thoughts of having a document in portrait mode all tall and beautiful. OR, a killer long Facebook window. But alas, this feature will have to wait for now... man, if AOC can release a new driver with this feature; I would say this $140 monitor is a KILLER. Still reccommend it.
First, when I connected it the monitor was aligned or setup on the left hand side... I want the NEW 16" monitor to be on the right hand side just as an extra screen space... so, I opened displays and moved the alignment. I noticed you can go up down left or right... which is cool. So I set it up for the right hand side, so when I scroll off the MBP screen to the right the cursor just goes over to the new screen. Great. However, the dock and toolbar are on the NEW 16" monitor no matter what I do! I want the dock and toolbar on the MBP still; and the new monitor just sitting there ready for me to throw any STUFF on it. How do I do that?
Also, when I use that multiple desktop feature... lol, I forget what its called. Each desktop switches the new 16" monitor to whatever # of screen I'm on. I can live with that if its the only way. BUT, better for me would be if the MBP has the dock and toolbar... can switch between those different screen #s... AND, the new 16" just sits to the right as extra space. So when I switch screen #s, the new 16" stays the same with whatever windows I have open staying there... this might not be doable, and that would be OK... but wondering if theres a way to do that too...
how do i set up an external monitor for my macbook air? I want to be able to view different content on the external monitor, than what is on my mac screen.
