I have tried to install Snow Leopard on my Macbook running 10.5.8, but the installation fails every single time. I have verified and repaired both the disk and the disk permissions, reset the PRAM, and removed all external devices from the system. Something of importance, the installation always makes it through the first reset, and then crashes afterwards during the second part of the installation. I am wondering if I should erase the disk, and install Snow Leopard, and then restore from a Time Machine backup, but this would be a last resort method.
I am having an issue installing Snow Leopard on my computer. Every time I start the installation process, the process makes it to the first restart, and then crashes. I am running Mac OS X 10.5.8 and using a early 2008 Macbook. I have tried verifying the disk, but Disk Utility says the disk is fine with no issues. The hard drive was recently replaced so I doubt that their is a problem there...does anyone have any advice on how I should install Snow Leopard?
Every time my iMac restarts or boots up, it brings me to the OS X installer page since last night.
I have done the disk utility check and my hard drive is ok. I then tried restoring from network which stops half way and reboot. I have also tried restoring from Time Machine but it has also stopped and rebooted several times.
I just downloaded the 10a380 build of snow leopard, and burned it using disk utility to a DL DVD. The burn completed successfully and the computer recognizes it. Every time I click on Install, it opens the installer and I press continue.. it says "Finding Disks" with a blue progression bar for about 30 seconds, and then exits the installer. I even rebooted the computer, holding down option, and when it gets to the screen with different partitions, the disk ejects itself. I have bootcamp with windows 7 installed if that makes any sort of difference.
Starting this morning I am being driven crazy by the Character Pallett launching unexpectedly on its own and then crashing almost immediately. Then it attempts to launch again, flashes briefly on screen, and crashes again. My crash log shows the same repeated process.[Terminating app due to uncaught exception 'NSInternalI nconsistencyException', reason: 'Invalid parameter not satisfying: (index >= 0) && (index < [_itemArray count])'] It's pretty impossible to get anything done. I tried reinstalling OSX combo 1.6.8, but the installer would not see my startup drive as being eligable; I then reinstalled Snow Leopard 10.6 and attempted to update to 10.6.8 that way. But this attempt lead to an error that cancled the install. So now I am running 10,6, but with many apps that require 10.6.8. And the Character Pallett keeps poping up and then crashing even with 10.6. I'm beginning to think it may be a hardware problem, either ram or logic board issue; but I lack the diagnostic skills to figure it out. I thought of trying to launch the Character Pallett on purpose, but when I open the System Preferences and click the box that would place the Keybaord icon in the menu bar (which is the only way I know to get to the Character Pallett) the icon doesn't appear. The check mark doesn't even stick.
As of this morning my Macbook is failing to connect to the internet even though both the ethernet and airport are showing they are connected and are green in the network panel. My husband's internet connection is fine (we both have Macbooks and go through the same router) hence I'm able to send this out. After looking at a similar discussion list, we have tried restarting the computer, deleting airport and adding it back in (although it's also an ethernet problem), deleting system configuration, restoring the whole Library..
Just receovered from a disk crash. TM brings everything back on my new HD. The problem is that when I try to backup again, I get an error message saying to check TM's preferences. One problem may be that it seems that TM wants to back up the full HD rather than doing an incremental one.
Info: MacBook Pro, Mac OS X (10.6.8), 2.53 GHz, i5, 8GB, 500 GB
Trying to find a solution to my printing issues, which have taken many forms over the years. The current frustrating gremlin: Macbook Air, OS X 10.6.8, Lexmark E250D laser, printer driver built in to Mac OS, driver .dmg also downloaded and installed from Lexmark  Wireless home network on NETGEAR router with extension to Airport Express. Lexmark E250D laser attached to USB on the Airport Express. Cannot add printer via the default pathway, the Bonjour system finds the printer correctly for about 5 seconds after the printer is plugged in to the AE USB port then it simply disappears off the window never to return. Airport Utility cannot find the AE which I recently reset and set up without problem. The AE light is green.Â
Via Network Preferences I find the IP of the AE and try to set up LPD printing. This successfully finds the Lexmark, calls it a Generic Postscrpipt until I select the Lexmark driver from the OS X list. It seems to correctly identify printer features such as in built memory and duplex printing. Sending a file to the printer results in the warning that the IP address is busy. In the past I simply connected by USB cable to the printer, but since a recent move the house/ office layout makes that very inconvenient. I have to go outside and downstairs to the office which has no internal access from the main part of the house.Â
Info: MacBook Air (13-inch Late 2010), Mac OS X (10.6.8)
Some web pages, such as [URL] and [URL], will not load in Safari. The error screen says "Safari has repeatedly encountered an erro while trying to display [URL]" I have tried repairing disc permissions and have re-downloaded and re-installed Safari, with no luck.
So I just started using Time Machine (had been using CCC). A quick scan of my backup shows that it's not backing up my Outlook email database file. This missing file is very concerning to me. First of all, this is one of my most important files, needless to say. But also, it makes me wonder, what other important files might Time Machine be deciding to skip without my knowledge. I went into my Time Machine preferences and have no exclusions in there
i have a case where i have a large file (a sparse disk image) which at some point in the past seems to have become corrupt in the sense that there were problems reading it.eventually, i realized that attempts to clone the drive containing the bad file were failing (super duper reporting an error).an attempt to finder-copy the disk image also failed.i went to find backup copies of the file in question in my time machine backups and realized that the file did not exist in my backups.digging through system logs, i discovered that when time machine encountered an error when reading the file, it was failing silenty - that is, no error was reported via time machine - backups were seemingly completing successfully.so as a result, i went quite a long time with no backup of the failing file, nor any obvious warning that it was failing, even though time machine was encountering an error every time it tried to backup the file.
this seems like a major problem, perhaps even a design flaw in time machine.in fact, it is really the extreme opposite of the behavior i would consider "reasonable" for a reliable backup program.i somehow misinterpreting the data? any guess as to why time machine would not report when it tried to read a file during a backup, but failed?
I have a Snow Leopard Install Disk for the 13-inch Macbook Pro model.I also have a 21-inch iMac. I have OS X Lion installed on both. I have Snow Leopard installed as a partition on my Macbook Pro, which I installed via the install disk. I want to do the same thing for my iMac but I am unable due to (seemingly) my install disk is for a Macbook Pro and not for an iMac.
Today I performed a clean install of Snow Leopard on my late 2009 Mac Mini. After completing the installation, I began running software update to bring everything up-to-date.While software update did find and install a number of updates (10.6.8v1.1 Combo update, Security Update 2012-002, Apple Software Installer Update, iLife Support 9.0.4, Remote Desktop Client Update 3.5.3, Airport Utility, Java, Safari) it did not find an update for iTunes (which starts at version 9.x, I believe, in a SL clean install).I assumed that this was some sort of random glitch and manually downloaded and installed iTunes 10.6.3.After that, I re-installed iLife '11 (from a retail DVD, not the App Store).When I ran Software Update again, it found updates for Garage Band, iDVD, and iWeb, but it did not show the updates for iPhoto and iMovie.I found this to be unnerving, as I performed a clean install when I first obtained this Mini a few months ago and didn't experience any of these problems - all of my Apple software updated automatically through Software Update without a hitch.
I began researching this problem online and found that other people have been experiencing this same problem (or some variation of it), and it seems like it began appearing around the time Apple updated some of its security certificates in March.In particular, I've found several references to the missing iPhoto update.This one is especially noticeable because an iPhoto library created in iPhoto 9.2.3 will not open in iPhoto 9.0, and this generates an error upon opening the program (i.e., a user backs up their iPhoto library created in 9.2.3, performs a SL clean install, reinstalls iLife, goes through the Software Update process until it shows that no more updates are available, and are shocked to find that they are unable to open their backed up iPhoto library because they have an out of date version of iPhoto).The most common (and admittedly logical) solution proposed in the threads I've read is to download any necessary updates directly from the Apple website. However, I am curious as to why this previously functional feature now appears to be broken.Has anyone else been struggling with this? Does it indeed have something to do with the new security certificates? Is Apple aware of the problem?
Every time I boot up, the computer goes immediately to this screen: In short, I was running leopard, and installed 10.6. Caused problems with Word and system fonts, so I called Applecare, who were of no help and basically told me to contact Microsoft to get the problem fixed. I decided just to do an Archive and Install of 10.5, so that I'd at least have my working system back and in order. Did that, and was going through and drag/dropping folders from the "Previous Systems" folder into my new one on the recently installed 10.5 setup, and the computer froze while some of the library files were transferring. I powered down, and it KP's after time I attempt to turn it back on.
This is the first time i reinstalled(clean install) my snow leopard on my MBP. All went fine but then i inserted the disc for bundled application (which contains the ilife apps) but it keeps failing.Â
It says that "the installation failed. the installer encountered an error that caused the installation to fail. contact the software manufacturer for assistance".Â
I've also done my research on this matter. I've gone thru a few steps i tried as below without success:Â
1)normal install - fail
2)repair permission - fail
3)install in safe mode - fail
4) install using another admin acc - fail
5) made an image out of the disc and install - fail
6) used a similar disc(my dad's since we have identical version) - fai
7)updated my system and install - fail
8) reinstall the mac - failÂ
i cant think of any other solution as im a bit noob when it comes to mac. is there any other things i could try before taking it Apple?
I'm currently using a MBP 13 inch and am running Leopard on it.
I just bought a copy of snow leopard today but i don't know if I should do a direct upgrade from leopard to snow leopard, or wipe my MBP and do a fresh install so i have snow leopard on a clean slate.
Have any of you tried the second option before? Or do any of you have advice on which path I should take?
The internal hard drive on my early 2009 iMac is being replaced but I have to reinstall Snow Leopard myself.I did search in MRoogle and at Apple and cannot seem to find instructions on how to perform a clean Snow Leopard install on an iMac internal HD.
Can I do this? And if so how? Or do you think I should try and install Leopard on the existing Hd in the iMac? I still have these discs but have to get the SL applications install disc out of my drive (it's stuck and the iMac won't boot past the blue screen).
I jsut did a fresh install. wanted to use my SL DVD but the MBP i5 refused to star with it so I used the original DVD (10.5) and upgraded with the SL DVD to 10.6. However after the initial SL Installation, it tried from the SL DVD and this failed. I did a manual restart, starting from the HD and everything ran fine. however today I note there is a locked file on the HD named Mac OS X Install Data. It contains 181 .pkg files.Now I suppose this should have been moved or deleted as part of the install process. Can I move them to a file where they belong?Â
Info: MBP, MM, MBP - 10.6 + Windooz XP on a hard partition
Did a search through here but couldn't find anything concrete. What are the differences between a fresh Snow Leopard install and a factory Snow Leopard install? I ask because I bought an Intel SSD and don't know if I should bother cloning the hard drive that will come with my new 15" MBP or I should just install a fresh copy from a Snow Leopard install disc. I'm aware macs come with next to no junk pre-installed, but are there some factory settings that are worth preserving if they aren't documented well?
I tried to install Snow Leopard on my MacBookPro but it cannot install and cannot be ejected. I need to eject.Â
The reason for this is a long story. My logic board was replaced and my Mac was wiped clean. I am not trying to recover from back up but could not figure out the next step after the recovery finished. So I tried to install OSX from the disk that came with my Mac. Probably not the right corrective action. Â
I need to remove the Snow Leopard DVD and finish my recovery.
iMac with 2Ghz Intel Core 2 Duo, 4GB RAM, plenty of space available and currently operating 10.5.8. Now I want to upgrade to Snow Leopard and since my Mac Mini came with it, I attempted to use the OSX install disc from the Mini in the iMac. I don't see a reason why this shouldn't work. There's no DRM or anything as far as I know. I'm just trying to bridge the gap so I can download Lion. I've looked into some of the advice others have given on this subject but my computer doesn't have those issues. I've tried booting from disc but I get the same message.
Using Mail 3.6 on 10.5.8. When I send from my .me account I am repeatedly ask to verify the recipient, with an oval connect button. Can I stop mail from asking me this every time?
I am trying to install Photoshop CS4 on a MacBook Air running OS X 10.5.8. The error message is the application Setup quit unexpectedly and then when I choose Report there is a long message and at the end:
My friend wants Exchange support on mail but is on Leopard. I don't completely feel comfortable installing Snow Leopard on their machine because they don't have a backup, so I was wondering for my peace of mind before tomorrow if anybody had any experience with installing Mail from the Snow Leopard install disc onto Leopard.
I have a new macbook pro and application install disc keeps failing stating that "The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."Â
Am I supposed to do something special to get around this?Â
I know better than to buy a new operating system the first week it is introduced, but it sounded so good. After inserting disc and starting install in my Macbook pro, it seemed to be installing but restarted the computer in about 20 minutes. WOW, fast install I thought to myself. Tried to use new features but realized I still had 10.5.8. Tried to install it again same result. Called apple tech. and they had me doing all kinds of things but determined it was a bad disc. They are sending out a new one ( Apple tech is the best ), I asked if anyone else had experienced the problem and was told YES. I only hope the next one works. I am now reading reports of HP printer problems. I hope the next disc they send will install and not have the printer problems.
I tried to install Snow Leopard and at some point the installation reported an error. After several tries It says my HD needs Registry Activation in order to continue.
I go to Disk Utility and the volume apears, I try to verify and reports error. Then to Repair and error again.
I think I need to Activate Registry, but i can't through the Disk Utility, and via Console can't find the right code.
It's formated Mac Os Plus, and says there're no activated propietaries.
I have lots of information and I'd like to g back and unrun the install process, but don't know how to proceed.
I have been using mac for a while, but now I face an issue I hope is solveable!
I played around with the menu bar, turned it black on white. Now after messing with the files, I get a -10810 error every time i boot. This happened from placing the original menu bar files back in place.
I am looking to do a fresh clean install of snow leopard. I have an external HD if needed an an external dvd drive. my dvd drive in my macbook is broken.
Can someone please tell me how I can install SL if I cannot get into Mac OS X at all?
I tried safeboot, wont launch, I have tried resetting over and over, it wont get me into mac os x because finder and all my apps have the -10810 error.
