OS X Server V10.6 Snow Leopard :: Networking Wireless Printer?
Feb 15, 2012
I am trying to install my Hp wireless printer to IMAC. When I install the software I get asked if I want to use its wireless connection as well. i click yes, and it asks me to verify the network. My network and a few others show up. My network shows up as having full signal, but when I click on it to be the chosen network I keep getting Network not with in range, but if i click any other one of the networks listed it finishes the process just fine. Whats going on,
Info:
iMac, Mac OS X (10.6)
View 1 Replies
ADVERTISEMENT
Feb 24, 2012
I have a mac laptop that works well on my verizon wireless router. I have a HP printer attached to the router. It works well with 2 windows wireless PC's. How do I set up the mac laptop to print on that printer?
View 1 Replies
View Related
May 22, 2012
I have a Canon Pixma MX860 at home. I've connected three Macs to it, two running Lion and one running Snow Leopard. In each case, I simply clicked the "+" sign and the printer appeared under "default". This became one of my standard examples of "why Macs are better than PCs" (process very compicated for PCs).Â
I just got a new MacBook Pro at work running Snow Leopard, and it doesn't see the printer, and there doesn't seem to be any way I can add it by hand. It *does* see the computer memory as an SMB device, but there doesn't seem to be any way to go from that to adding a printer. I suspect this may have something to do with security settings, since they do lots of tweaks to computers before they give them to us.Â
View 2 Replies
View Related
Apr 8, 2012
Lexmark 4310 series printer will not print after printing first job after setup. Msg in printer window says printer not connected however the green light is solid on the printer. Lexmark tech support says the issue is with comcast router. Comcast says issue is mac related because both macs fail to print while HP machine works fine....
Info:
MacBook Air, Mac OS X (10.7.3)
View 1 Replies
View Related
Oct 13, 2009
i just bought my first mac three weeks ago (woohoo!) after being a long time pc user. so far i can say that i'm enjoying my iMac and learning a lot of new things. i've been lurking on this forum for a while and most of my questions have been asked and answered by other members. this is my first post and i can't seem to find an answer in this forum or anywhere for that matter.
as i've mentioned, i purchased an iMAC about three weeks ago. it came pre-installed with leopard and a snow leopard software to upgrade -- which i did. i still have my laptop running with vista and i would like to network them together. i've been researching how to do this but most of the how-to's out there are for leopard or tiger OS and xp -- where i get stuck when i have to click on 'windows sharing' box since snow leopard doesn't have that option. can someone give me a step-by-step procedure on how to network both of my computers. i would like to mention that i have a home network and both computers are connected to the internet wirelessly. also, i would like for my entire computer to share, and not just specific folders.
View 1 Replies
View Related
Jun 6, 2012
Proud to announce we are about to become a 2x Mac computer household (not including 2x iPod classics and 2x iPhone4s!)This has got me thinking about how to 'network' my new MacBook air with my existing iMac.This is what I am trying to do:
Computer 1 - 2006 iMac Core2Duo 20" 3GB RAM running Snow Leopard 500Gb HDD, not far off full.
Computer 2 - 2011 MacBook Air 13" i5 4GB 256GB SSD, running Lion
1. Due to the smaller HDD on the MBA, I am thinking it would be nice if the MBA iPhoto could 'see' and store a local copy of for example the last 20 events in the 'main' iPhoto on the iMac. Alternativly, all events from 2012. I can't use iCloud on the iMac because I don't want to update the iMac to Lion (won't bore you with why). Managed to get OTA syning of iCal via iCloud using IMAP just last week which was my only really driver for getting Lion on the iMac.
2. My whole music library is 55Gb so again, this is too much space to take up of the 256GB. Clearly I have the iPod classic 120GB which I would generally have with me, but it might be nice to have a 'selection' of music from the iTunes library on the MBA. Is there a way the MBA can network to the iMac iTunes library and take for example a few auto-playlists? I use Dropbox, and I now have access to Google Drive which should cover my needs to sharing documents. I guess I could put 5GB of music on Google Drive, and point the MBA itunes library to that. Although won't this mean I have to double account for the 5GB worth of music on the iMac (5GB in itunes library, 5GB in local copy of Google drive).
Info:
MacBook Air, Mac OS X (10.7), 13" i5 256GB SSD 4GB RAM
View 2 Replies
View Related
Oct 24, 2009
I'm having a problem I think with the internet sharing feature in snow leopard. Here's what I'm trying to do. I have a cable modem plugged into a time capsule in another room, and I use a mac mini to connect to that via wifi. I am trying to share that internet connection with a couple of devices from the mini's ethernet port. I have the mini plugged into a dlink switch along with the other devices, but none of those devices can connect. The mini works fine, and I made sure in sys prefs I have internet sharing checked and it says from airport to ethernet. Can the mini only provide connection to one device? Should I be using something other than a switch?
View 3 Replies
View Related
Apr 3, 2012
currently using mac mini server for sharing files and folders. Would like to setup VPN to get access to files remotely.
-Model identifier: Macmini 3.1
-Mac OS X Server version 10.6.8
I am not sure if this version supports VPN.
Info:
Mac mini
View 1 Replies
View Related
Aug 25, 2009
I am using an HP Color Laserjet 3505n. Will snow leopard work with this printer?
View 2 Replies
View Related
Sep 3, 2010
I have a Mac Mini G4 with PowerPC processor and I was wondering if anyone has some suggestions for obtaining a wireless adapter of some sort to use with it.
View 1 Replies
View Related
Mar 22, 2012
i have a domain controller and active directory based policy win 2003, one xserve running mac os x server 10.6.8 and alot of macs workstations. How can i push login script on all macs without adding it in login items? The script i want to store on smb or afp share disk, and will be edited from time to time. I've tried to add it on xserve from WGM, but it threw an error that current directory schema doesn't store desktop settings.So how can i solve this?
View 2 Replies
View Related
Jun 14, 2012
I run 10.6.8 server in a VM with Parallels Server for Mac. Lithium pinged me early Monday morning to tell me that my calendar server wasn't reachable. I found it had kernel panicked. After resetting it and verifying the directory structure and permissions, it booted fine. But availability or free/busy wasn't working for all users! The events were all there. Invites could be sent and received but when a user checks for availability when creating events. they see the daily work hours grayed out but not anything corresponding to a scheduling conflict. Â
Things I have Tried:
- bounced ical server
- Rebooted the server
- checked the owners and permissions for the data store hierarchy. (_calendar:_calendar 750)
- checked for xattrs on .ics files in several calendars
- deleted .db.sqlite for several users in several dir in their calendar stores
- in the past I have found that some iTIP invitations seem to get "stuck' causing problems with an individual users free/busy and deleting the inbox resolves this so I deleted several inboxes
-I moved a copy of the data store to a test server and pointed several clients at it.Â
The issue persisted in all of these cases without any change in behavior with one exception; somewhere (i lost track of where) during this process users also lost their delegation preferences. I'd love to find out how and where that is stored so that it can be restored in the future. It seems pretty fragile...Â
I found one way to restore the functionality; copying a users __uid__/<GUID>/calendar out. . Moving all the folders under <GUID> out of the way and dropping the .ics files into ical with their account configured in that instance. Although this worked for selected users, I have many, many users and calendars so this solution would be suboptimal. Â
Info:
Xserve, Mac OS X (10.6.8)
View 1 Replies
View Related
Apr 6, 2012
my problem is that on a restart of one of my 10.6.8 Servers parts of the Serveradmin configs are gone while some of them persists. The lost configs are everytime the same: VPN (complete) and iChat (a secondary but very important Host-Domain). Of course a can restore them from a backup but that shouldn't the standard procedure after a restart....Â
View 11 Replies
View Related
May 15, 2012
I am running an open directory/active directory network. Authentication is from the Windows server 2003 active directory. It has worked fine until the last month. Now clients stop authenticating & when I check the AD plugin it says network accounts are not available. I can force the server to unbind, then renew the binding & everything works great.Is there any work around or fix for this other than upgrading the windows server to 2008?Â
Info:
OS X server, Mac OS X (10.6.8)
View 2 Replies
View Related
Mar 14, 2012
I had a goodworking SUS (10.6.8) working but the drive is getting full so i change the location of the files to another disk (in the xserve)and follow instructions from Apple (page 84 from the manual System Imaging) sudo cp -p /private/var/db/swupd/html /Volumes/My_Volume/My_Software_Updates_Folder/This works and i copy the files to a new drive. I also change the SUS so that theu host files for Lion clients url..works also, start SUS in Server Admin but when clients wants to connect i get an error that there is no SUS available and when i use the browser for an check i get een Forbidden error url...ForbiddenYou don't have permission to access /index.sucatalog on this server.Apache/2.2.21 (Unix) Server at 127.0.0.1 Port 80.
View 1 Replies
View Related
Jun 28, 2012
Trying to set up the Software Update Server under 10.6.8 Server. Have everything set up properly as per Apple's documentation, but all clients error out on software updates (saying they can't find the index. sucatalog file). When you view this file, which is an alias, within the HTML folder that is created when you enable the Software Update service in Server Admin, the alias doesn't link to an original.I've tried this on two separate 10.6.8 Server installations and I get the same error on both machines.Where is the alias "index.sucatalog" supposed to point to?Software Update Error Log in Server Admin says "Symbolic link not allowed or link target not accessible" and points to the alias file.
Info:
Mac mini, Mac OS X (10.7), Xserves (Early 2009, Early 2008, G5), Mac Pro
View 1 Replies
View Related
Jul 2, 2012
My system is MacPro 2009 with 10.6.8 server and Apple RAID card. Last week, RAID util just notified me of one drive is not viable, so i decided to replace the drive today. The configuration of my system is... There is an Apple Raid Card for HW Raid system Bay 1 = 640 TB drive with Mac OS X 10.6.8 server installed Bay 2, 3, 4 = 1.5 TB drives set up as RAID 5 below is what I did to replace the degraded Bay 4...Â
1. I shut down the system
2. replaced the corrupted drive with the new hard drive
3. tried start the machine again.Now my machine refuses to start up with the blinking question mark... I guess that the system fails to recognize the new drive or cannot find the system files...Â
4. So I put back the degraded drive...
5. The machine still won't start...
6. I tried to use the 10.6 server installation disk to boot up the machine to check if I can fix the system via disk util; but, everytime I do this, I got kernel panic... Â
7. resetting PR Ram didn't help, cannot boot up via safe mode as well (since the system file is not accessible now, I guess...).
8. booting via 10.6.2 server installation DVD still gives me kernel panic... Â
Why would my system corrupt by just replacing one degrade drive? The Mac OS X is not even the part of the Raid system... How am I supposed to fix this issue with out the installation disk?
Info:
Mac Pro, Mac OS X (10.6.8)
View 4 Replies
View Related
Oct 14, 2009
Years before Mac OS X 10.0 was first released in 2001, Apple launched Mac OS X Server, targeting its newly acquired Unix-based operating system technology at the education and workgroup server market. Apple has struggled ever since to find a broad server strategy that works. The solution may be as obvious as the iPhone App Store. Mac OS X Server has remained firmly stuck in the background even as Mac OS X has blossomed. Over the last decade of Mac OS X's development, Apple transformed its legacy Mac operating system from an outdated relic stuck in maintenance mode throughout most of the 90s into a highly regarded system that gets as much or more respect from industry critics as any other desktop operating system.Apple accomplished something that many others in the industry failed to do: marry the power and familiarity of Unix with accessible ease of use in a commercially successful product. Ray Noorda tried to do this at Novell in the early 90s; Caldera's OpenLinux also failed to take over the task from Novell ten years ago. United Linux and a series of followup attempts to standardize Linux all failed to accomplish their aims. A variety of efforts to sell Linux to consumers since then have all made very little progress outside of a small niche of hobbyist users.
View 39 Replies
View Related
Mar 10, 2012
I don't use any of it and would like to update to lion with out the server portion.
Info:Mac mini Server (Mid 2010), Mac OS X (10.6.8)
View 2 Replies
View Related
Mar 23, 2012
Up until a recent update, software update was working. Now it just crashes. I've tried deleting the Pref's and downloading updates directly, but that hasn't helped.
Info:
Xserve, Mac OS X (10.6.8)
View 3 Replies
View Related
Apr 18, 2012
I'm trying to install a SSL Certificate on a mailserver under 10.6 server. I dont know what to do by intermediate certificate and choosing type on certificate assistant.
View 3 Replies
View Related
May 19, 2012
Server version is: 5.0.8 Current available seems to be : 5.5.24 community server available from h [URL]if I already have several databases running under 5.0.8Â what are the hazards with upgrading to 5.5.24 community server?
Info:
Mac mini, Mac OS X (10.6.8)
View 1 Replies
View Related
May 27, 2012
I can't seem to get the App Store to sell me Lion Server for my Snow Leopard Server.I'm trying to remain positive about this but I'm getting really that money isn't enough to make this happen.My experiencewith the App Store and Apple policies in general is its almost time to dump OS X and head back to Open Source.I put money in my iTunes account.I've done the 15 logins it takes to satisfy AppleID my account is complete and up-to-date in the store and the Support Communities.How do I buy the software and actually download and install it?
Info:
Mac mini, Mac OS X (10.6.8), upgrade to Lion
View 5 Replies
View Related
Jun 16, 2012
I only have macs in my network and am not aware of any mac viruses. Afer I had the chance to review everything it became clear the e-mail server was sending out e-mails. SMTP logs for my mail server showed numerous attempts between yesterday and today to send out e-mails. Considering my mail server has not yet been launched and is not being used to either send or receive e-mail I imagine the work must have been done by a hacker ro sometoner else who hijacked my mail server to send out spam e-mail to others.Â
How can I prevent this from happening again the in future? Is there a security setting that would prevent this? My firewall had a relatively long and safe password but I changed it today just in case. Also, I changed the password for both the firewall and server. Will this help or is it possible for a hacker to connect and gain control of mail mail server without the need to know these passwords? If not in OS X Server, is there a third party application that would protect the mail server from this in the future?Â
View 6 Replies
View Related
Dec 9, 2010
AirPort Extreme 802.11n Wi-Fi wireless networking;2 IEEE 802.11a/b/g compatible
Bluetooth 2.1 + EDR (Enhanced Data Rate) wireless technology
View 7 Replies
View Related
Mar 19, 2009
I'm interested in buying a new Mac mini, however, I absolutely loath anything wireless. (I'm aware that that's a minority opinion.) I was therefore wondering if it's possible for my Apple dealer to remove the built-in Wi-Fi card (AKA Airport Extreme) from the mini, just like they'll upgrade the RAM to 2GB for me?
View 24 Replies
View Related
Mar 18, 2012
you just connect to a wirelss network and you use the internet with out conneciting any cables Like my friend has a HP desktop and it has built in wireless aka WIFI
View 3 Replies
View Related
Feb 14, 2012
I have a Snow leopard server with a folder shared Via SMB for the 2 PC's we have, all the macs can read and write to this folder OK. About once a week the 2 pc's take 10 mins to start and then cannot connect to the share. Web/email and sharing betwen them still works. I can ping the server from both. I've turned off the smb and restarted it. Also tried restarting the Xserve. This still has no effect. All internal firewalls are off. I've tried guest access.
Info:
Xserve, Mac OS X (10.6.8)
View 2 Replies
View Related
Mar 20, 2012
I'm trying to using Server admin on a remote Mac to manage our xserve. Both are running 10.6.8 and I've installed the Server Admin tools onto the mac. Both the Workgroup manager and Server Monitor work OK on the mac, but whenever I try and connect the Server Admin it always comes up with the error : "The login information is incomplete for this server or is not valid. The server failed to accept the login information you provided for <servername>. Check the name and password and try to log on again" I can't connect using the server name, FQDN, or IP address. The macs are all using OD and AD and I've tried both AD and local OD accounts (all administrative) but to no avail. DNS is working OK and I can resolve the server-name with dig and dig -x. I can screen share the server so connectivity isn't the problem.Â
View 8 Replies
View Related
Apr 24, 2012
I've googled and searched, I can't see what I'm missing, so I am turning to the community for help, because I simply don't get this. I own 2 domain names. I'd like to use the build in Mail Server application into SL Server, so if your suggestion is using another mail server, please don't post that.Â
Let's say my domain's are domain1.com and domain2.com I've looked at the Mail Server Admin user guide, and I've followed a couple of wizzards, and... all in all, I am getting no where. Let's also say my email client is my iPhone.Â
Ok, so domain1.com currently has no email with my current provider, and domain2.com currently has email from my current provider, it's my desire to eventually switch this, but experimenting on domain1.com will do no harm, so I am experimenting on this. Both domains give me the ability to point to an mx address.Â
Here's what I've done. I've got my user created in Workgroup Administrator, and I am confiuguring my LDAP3v, and I am authenticated enough to create and delete users.Â
***I Should note that DNS is currently disabled, I gathered from all my reading that I don't need the DNS enabled because I manually put in the MX record to mail.domain1.com and domain1.com is correctly identified. The server is also the webserver, and all the web server functions are working as expected! I don't know if not having the DNS enabled is holding me back or not ***Â
1st, I enabled the mail service in the Server Admin. My domain name is ServerName.local and my host name is mail.domain1.com (I created an a entry in my dns settings for that). Enable SMTP is set, IMAP and POP are enabled as well.
I don't intend on setting a relay, because I want this server to do send email out. I do have some cases where I send a mass email out, not for spam but for Christmas card purposes, and I think this is a good free way to not have to limit myself to batches of 50 or so.
I have my created SSL certificate, and havce only the Kerberos and CRAM-MD5 settings set in the security.
In my hosting section, I have enabled Virtual hosting, and listed my domain1.com and domain2.com below.
Now in workgroup manager, I've connected to my LDAP3v database and created a test user, and a test group. In the server admin, I added the test group to the list of authenticated mail users. I made my test user a member of the test group, and made that his default group. I enabled the mail service, and set the mail server which is ServerName.local, and enabled POP and IMAP.Â
That's it. I've done nothing in terminal, just that. I was getting a user unable to authenticate error, it was able to download the certificate though. Then I realzed I had an MXE defined in my settings for my DNS domain manager. So I changed to an MX, to mail.domain1.com and then I created mail.domain1.com pointing to the same IP address as domain1.com, and unfortunately the DNS records haven't updated yet, because I initially didn't create the mail.domain1.com entry, and now it's saying the server isn't responding, so I am anxiously awaiting an update from the DNS in the world to see if the issue has now cleared up.Â
Info:
Mac mini Server (Mid 2010), Mac OS X (10.6.8)
View 5 Replies
View Related
