What is it with Apple and still not having implemented automatic recognition of external display when hooking up to the MBP. Seriously? Do we really need to close/ open the lid in order to shut off the MBP screen. Why does it work in Windows (via Bootcamp) and not in OS-X? I was hoping this would be fixed in SL but still no.
I need some help on this matter. I have a Western Digital external hard drive hooked up to my AirPort Extreme; and I am able to view it as a drive on my MacBook Pro but when I go and try to start up "Time Machine" its no where to be found. The hard drive is formatted as a FAT32 drive, does this matter in regards to recognition by Time Machine?
View 3 Replies View Relatedhere we are with SnowLeopard 10.6.x and it still has no automatic shutting off laptop screen (Macbook Pro) when hooking up external monitor????Why do i have to close the lid, let my laptop go to sleep, wake it up, re-enter password, have my internet shut down and re-activate and all other processes just to shut down my MBP screen when hooked up to my cinema display???Hell even Windows Vista/ 7 does it automatically when i tested it via Bootcamp, requiring no closing of the lid or halting any processes or the internet.
View 3 Replies View RelatedMy external display (HP w2207) seems to conflict with my MacBook Pro (15 inch Retina display, early 2013) since I upgraded MacBook OS to 10.9.4.The external display works at initial boot of Mac but does not work after OS sleeps and I attempt to awaken, and while the external display is not waking, the Retina display flashes through different screen views, which only partially reflect my normal screen, or do not reflect my normal screen at all.
Info:
OS X Mavericks (10.9.4)
I have a new 27" iMac retina display. Is there any way to use it as an external display (since it does not support Target Display Mode)?
Info:
iMac with Retina 5K display, OS X Yosemite 10.10.1
For the past few months i have been using an external display hooked up to my 12" powerbook g4. I have had it on a dual display mode so no mirroring. Recently i would open the laptop lid waking it from being in sleep mode and my internal display will not turn on. The apply system profiler does not even recognize that the internal display exists. My external display works fine and has always been set as the main display. If i go to detect displays nothign happens. I have tried restarting the computer, instering system disks, unplugging the external and nothing has worked. I simply cannot get my internal screen to fire back up. When i used to unplug my external display the internal display would switch back to being the main display and everything would be fine. Now i cannot get the internal display to function whatsoever. Please try and help me as a need this laptop working and i will be ordering a mac pro soon for use with my external display.
View 1 Replies View RelatedJust wondering if anyone could help me figure this out.
I have my 40" flat screen plugged into my imac via VGA cable to mirror the image.
I'm just trying to have the imac display sleep while I play a movie full screen through the external TV.
I've tried two different ways but both have failed.
1-I set up a hot corner in the imac to sleep display but this results in both the display and the TV sleeping.
2-I just set the power settings to sleep after 1 minute. This works but then If a movie is playing the computer won't go to sleep.
I have a Macbook Air, and i just picked up the new LED ACD from my local apple store. Since im new to mac, is there a way to either close my Air and not have it go to sleep? I want to use the external display as the primary display with my laptop closed, any ideas?
View 4 Replies View RelatedI am about to buy a new 24" iMac. I currently have a Dell 2408WFP 1920*1200 display which I would like to use as a second display for the iMac.
Which Mini Dislpayport to DVI adapter do I need? Single-Link or Dual-Link?
I have a question about using dual displays with my new macbook. The basic issue is this:
1: plug in second display and setup dual monitor support to use the external hi-res display and the macbook's display (no problem here).
2: drag windows to the external display and resize to use (no problems here either).
3. Power down and disconnect the external display.
4. Start up the macbook without the external display and try and open up a program that I was using previously on the external display. The problem is that it is resized and positioned for the external display and is now off the screen of my macbook display and I can't directly get to the title bar to move it or the resize corner to resize it.
I just purchased a 23" monitor to replace my iMacs 17" display (since it has a nasty crack in one of the corners). I hooked it up fine and all, but the displays are linked, allowing me to hover the mouse to the iMac's display which I find annoying most of the time.
Is there a way to make the iMac display zone out and just use the external by itself?
I'm interested in the new iMac but could not work with a glossy display. Can anyone share their experiences of using the iMac with an external display? In one respect it seems like a waste to have two monitors but the base model costs little more than the maxed out Mini and seems like the better option.
I would be interested in seeing photos of any setups featuring the iMac and an external display.
Also, is there a way to turn off the iMac display when using an external display?
While using Google Sketchup and several other prgrams concurrently my macbook air cpu heats up substantiall. I like keeping the air "open" to allow for maximum heat disipation but of course this keeps the air screen on while I only want to use my external monitor. Is the only way to turn of the air screen turning down the brightness and using the "Mirror Display" option or is there another setting which alows my to utilize only the external display while the screen is open on the air?
Info:
MacBook Air, Mac OS X (10.7.4)
I have a Macbook Pro 2.16 Core Duo, and I'm wanting to install 10.6, but about a year ago, I cracked my screen to the point that I cannot make anything out on it, and haven't replaced it. Instead, I have just been using it in clamshell mode, which has worked out fine so far. My problem is that I cannot get the 10.6 install to show up on my external monitor.
I searched around, and could only find one other similar thread that just ended with the author putting it in clamshell and having it work fine. When I boot to the install and close the screen, I just get a grey box on my external display with a black bar on either side of it. I can't seem to find any other resources, so I'm not entirely sure what to do at this point. Any help would be greatly appreciated.
i'm hoping someone can help me out on this little problemmy usual set up is a pair of speakers connected with jacks via an m-audio usb audio interface, with an external monitor connected via mini-dvi to dvi.now for some reason my audio interface has randomly broken (on a side note, could a power cut have somehow broken a usb peripheral connected to my macbook whilst it was asleep?) so i've hooked up my speakers to the line out to rca. Now for some reason, when i plug the mini dvi connector into my macbook i get an incredible amount of hum. not just a little, alot!
View 1 Replies View RelatedI purchased a Mac Pro two years ago and had additional ram installed at COMP USA (had an APPLE dealer in the store) The ram upgrade gave me a total of 9 gig. When I check (About This Mac) it confirms the 9 gig of ram. I was setting my preferences in Adobe CS 4 and when allocating the percent of ram to be dedicated to CS4 my choice was centered around 3 gig. Same as my Mac Book Pro. I elected 70% of 3 gig of ram.
Does anyone use the Speech Recognition features built into OS X?
I have an 13" MBP that I ordered new in April, 2012. It is running Lion. I have an external monitor that is capable of 1440x900 resolution. I have an external keyboard and trackpad hooked up, and I like to close my MBP up and stick it in a BookArc. I want to be able to have the internal display disabled and to have the MBP only allow me to put windows on the external display, so long as the lid is closed. I also want to be sure that I am taking advantage of the resolutions available on my external monitor, which are higher than those supported by the internal display (specifically 1440x900).
This doesn't seem to work because I either have to allow the MBP to continue to draw my desktop across both screens (internal and external), OR use the "mirror displays" mode, which restricts my resolution of my external monitor. This means I either forgoe the additional resolution benefits of my external monitor, or I end up with windows that fall off-the-cliff, so to speak, because they are drawn in the portion of the desktop that would be shown on my internal display (which is closed).
I've read the community support pages on using the MBP with an external monitor, most relevantly, this page. It simply recommends using the "mirror displays" option. However, this option, as I mentioned above, doesn't allow me to make use of the additional resolution, and my external display looks bad. how to keep the 13" MBP in closed clamshell position, with the internal display disabled, and use my external monitor at resolutions higher than those allowed by the 13" MBP but which are available to my external monitor when not in "mirror displays" mode?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3), External display (1440x900)
I recently spilled coffee on my mid 2010 2.4ghz macbook pro. After drying out, the computer worked fine, although the battery was not recognized. Since apple does not cover water damage i bought a replacement battery and installed it today. After starting up the problem is not solved. there is still an X through the battery indicator and if i unplug the laptop it shuts down instantly. When i turn it on, the status LED on the front blinks 6 times before the laptop actually boots up. I have reset the SMC, NVRAM and PRAM.
Any help or input would be greatly appreciated.
Is there anyway to log on with voice recognition? Like if the password is "Apple", it will only log on to your wave pattern?
View 18 Replies View RelatedI try to 'calibrate' it and have repeated the stupid lines time after time, clearly and slowly in a quiet environment, but they never flash or indicate that it is calibrated.
How many of you use the Speech Recognition built into the iMac? And of those who do use it, do you use the built in mic or do you use a 3rd party microphone?
I have a Javascript file that detects key codes, but it is set to react to Windows keyboard keys. How would I adapt it to work with a Mac keyboard? Code: // Hotkeys document.addEventListener('keydown', function(e){ if(e.shiftKey && !e.ctrlKey && e.altKey){ switch(e.keyCode){ // Edit styles with Alt+Shift+E case 69: editStyles(); break; // Unblock elements with Alt+Shift+U case 85: unblockEle(); break; // Block element with Alt+Shift+B case 66: blockEle(); break; // Unblock latest element with Alt+Shift+L case 76: unblockEle(true); break; // Block elements (don't use nth-child) with Alt+Shift+W case 87: blockEle(true); break; } } }, false); The Alt key is the problem. I guess the Alt/Option key on a Mac keyboard is not the same as the Alt key for Windows. What name would I give to have that key recognized?
View 4 Replies View RelatedI am wondering that is it essential to connect power adaptor all the time while operating in closed calmshell mode? When I unpluged the cable it didn't work. Is there some way?
Info:
MacBook Pro, iOS 5.1.1
Is it possible to get facial recognition software for the MacBook Pro? I was looking at it on the Alienware M17X and thought it was pretty cool.
View 1 Replies View RelatedI have recorded a voice interview and is wondering if there is a quick way to type these recording out? maybe something that analyse the recording file or something that type when you speak?
View 7 Replies View Relatedi just ordered the macbook air 11 inch. but i was just looking around and seen that sony also has a great 11 inch laptop. the vaio x. it has 10 HOUR BATTERY for an 11 inch laptop and weighs in at 1.6 pounds. Now dont get me wrong i would not get it because i dont like windows, but it seems like this laptop doesn't get the recognition it deserves.
View 24 Replies View RelatedI thought perhaps the face recognition algorithm might work if I named my cats in a few pictures, but so far it has not. Would be cool if they updated it to work on cats and dogs.
View 12 Replies View Relatedhow to use Snow Leopard's Chinese handwriting recognition
View 9 Replies View RelatedI know it wouldn't be 100% secure given the iSight resolution and all, as well as other factors such as lighting, etc.Just thought it'd be a nice novelty to keep unwanted users off my Mac when I'm not around.
View 10 Replies View Related