I'm installing Tiger on a partition, what is the minimal space I allocate for it? My files will be run with an external HD. Would Tiger run well with 20GB after installation?
View 4 RepliesAfter emptying the trash, I've noticed that Lion does not see the additional free space until after doing a reboot, and even after that it takes a long time for it to find all the new free space. Anybody know what's wrong with the trash system?
Info:
MacBook Pro, Mac OS X (10.7.4)
how do I know what's taking up space on my macbook pro's hard disk?
View 4 Replies View RelatedI am thinking of buying a MBP, and I want to do my research correctly .
I want to get the base model (the 2.66ghz seems like a ripoff...), but upgrade the harddrive space. If I increased it from the 240gb to the 500gb, would that make my computer faster? Or what would the effects of it be? I am just wondering to see whether I should go for he 500gb or the 320gb...I do not want to get the SSD since they are pretty expensive at this point.
I'm running Tiger (with the latest software updates) on my old 12" iBook and in the last week it has started a LOVELY behavior of chewing through the 1.5-2GB free on the hard drive after it has been up and running for 5-20 minutes. The only recourse I've found is a reboot. I think it's tied more to the browser than the OS, but I've tried using Firefox, Safari, and Opera with the same result.
View 10 Replies View RelatedI've bought a 1 TB iomega ego mac edition II external fire wire drive. Once connected it asked whether i want to create a password and whether i want my data encrypted, to which i answered yes. Then a time machine backup started and failed after backing up 5.25 GB out of 39 GB of my data with the following error: "The backup disk ran out of space unexpectedly. Time Machine will try to make more space available by removing expired backups during the next scheduled backup". When i look at time machine it shows there is 994.29 GB available on iomega ego drive. The drive then went into: "Encrypting Backup Disk" message and it takes forever.
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.3)
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_2_1 like Mac OS X; en-us) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8C148 Safari/6533.18.5)
I have the MacBook Pro 2010 13" and recently I've noticed my disc space is slowly decreasing with use.
Im not downloading files or anything, but today I lost around 600 MB of space, I just kept opening my Finder to discover less and less disc space each time.
Is this normal or do I have a problem, this is the first time I've noticed it in the month and a half I've owned the machine.
I have an iMac running the latest version of Lion (10.7.4) and which I have upgraded to a one terabyte hard drive and full memory capability. I back up to a My Book 2 terabyte external hard drive using Time Machine. My iMac is often very sticky, though I've done most of the diagnostics I know of and preferences etc. are seemingly all OK and fcuk -fs gives a positive result! The Mac is often hard to wake from sleep and in particular seems to spend a lot of time backing up very-very slowly, with the result that it frustratingly seems to be backing up most of the time with the consequent effects on using other programs. Also the whole thing seems to grind to a halt after a hard days work with quite a few applications open. I'm wondering what can be causing this and what I can do to overcome this very frustrating and debilitating problem?
Info:
iMac, Mac OS X (10.6.2)
I have looked into this a lot already. It is to much that Time Machine backs up every single hour! It would be nice to set it to something like 3 or 5 hours. I have tried a 3rd party app to do this, but... If my computer was off or asleep when it was supposed to back up, it would get an error. It would not just do the backup when i turned it on or when it came out of sleep like stock Time Machine does. I have also seen a way to change the time incraments in the Terminal.(I am very good with it, not a noob) I have tried this and it screws up time machine completely. Maybe it does not work with the newest OS X. By the way... I have a 2010 MacBook Pro, got it 2 months ago.
Does anyone know a solid 3rd party app, that will work seamlessly. Or has anyone changed the time in Terminal and are currently using something different than 1 hour. There is a lot of examples online, but I would like the codeing that you literally used.
I got a 320GB harddrive for my MacBook Pro and put it in there, I can format it in Disk Utility and everything. I am trying to restore my old system from my other harddrive onto this new bigger harddrive. I have a Time Machine backup and I booted my Mac OS X disc, but when I go to Utilities -> Restore from Time Machine backup and go through the menus I am stuck at "searching for discs" ... it's really starting to irritate me. Can I just bust out the Terminal and
cp -Rv /path/to/backup/Macintosh HD/* /Volumes/Macintosh HD/
or will that not work?
I have the screen as dim as it can get. All I'm on is Airport with nothing else really going on and my battery life is only about 3 hours.
It used to be somewhere like 7 hours when I did this.... any idea if something could be wrong?
Coconut says I have 96% capacity left...
I just bought a terabyte Time Capsule to take care of backups and files with my new Macbook pro, without me thinking about this stuff at all anymore, that is the Time Capsule concept, right?
When I try to set up Time Machine it asks wether I want Time Capsule to work as wireless internet router. Where Im living at the moment, I am connected to a wireless internet system, but I dont have access to the router, or access to use Time Capsule as internet router either, I want to maintain using the wireless internet, and Time Capsule as wireless hard drive only.
I have snow leopard. I have a 1TB time machine set up. After all I just realize that it is too big for what I actually need. I think half of that would be more than enough. I have another 500GB hard drive. I was wondering how can I move my time machine files from a Bigger hard drive to a smaller hard drive.
All discussions, post and forums explain how to do it from smaller to a bigger hard drive using Disk utility. But that did not work for me, there is a error saying that the source is bigger than the destination. Does anybody know how can do this? basically using the apple computer and trying to avoid 3rd party software.PS, The back-up file inside the 1 TB hard drive is much less than 500 GB.
I've just bought an airport express so I can play music from my mbp wirelessly on my speakers and just realised that I have an old usb external hard drive that I never use so was just wondering if I could plug the hard drive into the airport express so I can use time machine wirelessly and make what is effectively a time capsule?
View 2 Replies View Relatedwhy is my mackbook air fan running all the time?
View 1 Replies View RelatedWhat is the minimal configuration (operating system and memory) for installing iTunes 10.x on a G4 eMac?It already runs on Tiger 10.4.11 with 718MB of RAM.
View 4 Replies View RelatedI was thinking that if i bought an external MOBILE hard drive (un-powered) i could take it with me sometimes when i need it in UNI (in Lectures where there is no power source to plug drive in), but also attach it to the mac and since it is un-powered and mobile time machine will work without needing external power.
View 2 Replies View RelatedI've got an iMac with a 1TB harddrive and am trying to use a time machine set up to back up my harddrive. The external harddrive I'm using for my back up is also 1TB. I currently have about 135GB of free space on my iMac's harddrive and my external drive is completely empty. When I try to back up using time machine it tells me that the back up is 1.2TB and cannot fit on my 1TB external harddrive. What would cause the initial back up to be larger than the actual computers harddrive? Is there anything I can do to rectify this issue without me needing to purchase a larger external harddrive for back up?
Info:
iMac Intel Core 2 Duo, Mac OS X (10.6)
My step-son works for a company that uses a variety of computers in their test dept. and when they upgraded the test equipment they gave the old stuff to employees.My step-son is a dyed-in-the-wool PC guy who doesn't care for Macs so when he saw a G5 PPC sitting there he took it home and gave it to me.
It's a 2.0 GHz dual-processor with 8x AGP video. I checked it out and the only thing "wrong" with it is that someone has set up the fans, all of them, to run full-speed all the time.First, how did they most likely do that and, second, how can I return the fans to their normal operation. This can't be good for the computer and it's so loud and annoying that I'd rather use my G4.It's a great computer otherwise, I hope they didn't do something permanent that would require a new motherboard, that's not in my budget.
Last summer my MBP 2.3 GHz C2D was heating up so much, you barely could touch it. So I decided to give it a little hardware checkup. Finding the fans completely stuffed with dust
But after a while i recognized that the fans went on high rpms (around 6000) already at startup and did not lessen anymore. I do not have any high capacity processes running and the temperatures are not just not warm buth rather chilly, so no need for high fan speed. Now I want to solve this problem as well but seemingly nothing will work.
[code]...
Info:MacBookPro, Mac OS X (10.7.3)
whenever I run Time Machine on my PowerBook G4 (1.5 Ghz / 1Gb RAM / OSX 10.5.8) it will eat up GB's of hard disk space while 'preparing the backup'. After that it finishes the backup, but I don't get the space back. I'm talking about the internal HD, not the external target disk of course. Does Time Machine use the space to generate some temporary files? Any ideas how I can get my disk space back
I'm looking for OS X software for splitting and joining mpegs and avis with minimal user interaction. ie. I don't want to have to use a movie editor and drag all the clips in, arange them and then export them, I'd like to just drag and drop them into a box and press 'join' In windows I was using PeckJoin for AVIs and Ordix Mpack for Mpegs, but I haven't found anything quite like them for OS X. I'm perfectly willing to use CLI tools or X11 tools if you know of any as well. Under linux (and OS X) I can join these files just by 'cat'ing them together on the command line, but that has problems if you are missing a file, or if one is named improperly, or is missing frames. Its nice to have a program that will give you warnings about these things
View 24 Replies View RelatedFor the past couple of weeks I've noticed that my old white macbook is running hot, and browsing has been kind of slow. I don't see anything out of the ordinary in the processes, but Heatsink A is reading -1. Should I just pull the machine apart and see if something isn't connected anymore? I installed a 7200 RPM HD a few months ago, but this problem is more recent.
View 3 Replies View RelatedI have an imac 7,1 - intel core 2 duo, 2,4GHz, that is 20" from mid 2007 with an HARD DISC: Western digital : WD3200AAJS - (320GB) that died.so I bought a NEW HDD: Western digital: WD10EARX - (1TB): Caviar green series I changed step by step the HDD and reconnected everything and all went well, until I re-started the iMac. After approx. 2-3 min the HDD Fan began to increase in speed and since then I have tried everything that I found on the net and nothing worked to slow down the fans.
That is the external temp sensor is set in the same way as it was on the old HDD. I reset the SMC and the PRAM several times, actually oppened and checked all cable conections three times. I installed the SMC fan control - no difference, the HDD fan control demo version - no difference. THUS the problem is that the FANS do not stop working as if the comp is on fire.
Info:
iMac (20-inch Mid 2007)
the other day i wake up and open my macbook pro and immediately heard the fan making noises ive never heard it make before. i checked istat pro. the fans were going at 2000rpm. this is when i started to get concerned since i would never hear the fans at that speed before. the difference was day and night. it sounds like the one or both of the fans are hitting something. i always hear the noise when i start up or wake up from sleep and after a while (30 minutes to an hour) it usually goes away but has come back once without me turning off or putting the computer to sleep. its a refurbished less than a little more than a month ago. im hoping its just some dirt that made it through keyboard and will eventually go away because i dont want to send my machine in to get manhandled by apple repair. has anyone had something like this happen before?
View 2 Replies View RelatedMy iMac seems to be a lot more noisier (a low humming noise, maybe the fans), than it was when I purchased it in a couple of months ago. When I first got it, it was the quietness and boot time which I was impressed with more than anything. Now it's noisier and boot times have doubled. I have noticed that the fans for for HD and CPU constantly spin at 1200rpm or more, with no applications open and as soon as I switch on my iMac.
View 3 Replies View RelatedI have a white MacBook and its three years old. It all of a sudden crashed last night and when I switched it back on the fans were running full, the time set to 1-1-2001 12:00am and there is an X through the battery sign. When I click on the battery charge symbol it says " No Batteries Available" although it clearly does as it runs without needing a charger. And then there’s the fan.
It started running at full speed (like I was playing a game or something) and it just runs like that all the time. I have restarted my computer and shut it down several times and the only problem fixed is the time. Also when the screen is shut it doesn’t go to sleep or even show signs that the lid is shut? I haven’t done anything to dislodge the sensor so I don’t know what the problem is.
A couple of weeks ago my IMAC 24 started taking a long time to bootup, 5 minutes and 20 seconds.
It starts with a blank white screen for 1:45, then a black & white blinking world icon comes up for 2:15, then a blinking black & white Apple icon comes on for 30 seconds, then a pale blue blank screen for 20 seconds. Then the wallpaper comes on and it seems to go to a regular boot from there. Where can I access what is happening during all of this 5:20?
Basically I have a MacBook Pro which logs in fine when I'm at work but when I'm on my home network it takes like 5 minutes to authenticate. All appearances are that it's trying to reach my work network to authenticate. Short of disabling wireless or having it prompt for my home network password before joining wireless, is there any way that I can either shorten the timeout or have it bypass network authentication when I'm at home?
View 2 Replies View RelatedMy Mac Pro takes two minutes to start up. It is also sluggish during normal operation. I have Parallels and a external hard drive installed. Do either of these contribute to this problem? Or is there a program that can be used to defrag the hard drive. (I recall having similar problems with my IBM computer. When it was defragged the performance of the unit improved).
Info:
Mac Pro, Mac OS X (10.6.8)
