processor 2.5 ghz core i5, 4 gb 13333 mhz ddr3.
when the computer is turned off it takes a long time for the apple logo to start when i power on. version is 10.9.4
Info:
iMac, OS X Mavericks (10.9.4)
Only an issue in OS.X not OS.9. Pulling the power cord eliminates issue for next start but not subsequent starts. Pulling the cord isn't easy how the computer etc is set up so I'd like to rectify the issue.
Info:
Dual 1GHz PowerPC G4, Mac OS X (10.5.6), 1.5 GB SDRAM
Every since I upgraded my OS to 10.9, my performance has been going downhill. Now, even though I have reformatted my hard drive and have not even put any new data on it, it takes 45 minutes to restart and 25 minutes for me to open the window to write this message. Below is my system info. Why my system seems to have slowed down so much. You can see there is nothing on the hard drive to slow it down.
View 8 Replies View RelatedOur 2011 iMac with SSD takes 2:15 (two minutes and fifteen seconds) to start up. Start up on a SSD should be faster. OS X version 10.7.4 and applications are on the SSD. Any suggestions for correcting this lack of speedy start up?
Info:
Mac OS X (10.7.4), 3.4 GHz Intel i7, 16 GB DDR3
Only God know how much regret I have for installing Lion.
Lot of problems are there but major problems is startup time it takes 3 minutes to start. Leopart used to start in seconds. Battery life has been decreased.
How to decrease statup time? Is there probme with my Macbook Pro?
Info:
MacBook Pro, Mac OS X (10.7)
I updated my circa 2013 Macbook Air 13" to OSX Mavericks and a strange issue has started. Every time I open Finder it takes literal minutes to load the file listing, and while it loads it freezes the section where the file listing loads with whatever background it was opened over. This happens all the time, and once it finally loads, it will do the same thing if I try to go to a different folder. This renders Finder essentially useless and I have had to add a third party (forklift) app to browse and manage files.
View 1 Replies View RelatedFor about a week now, every time I boot my iMac mid-2007 20" running 10.6.3 I get the following problems
-Booting takes about 15 minutes of seeing the apple logo, and a bar that fills slowly under it...
-When it finally boots all the dock icons are reset to the ones you get with a brand new mac, spaces and expose is reset as well.
-Spotlight reindexes Macintosh HD.
-Adium loses all contact icons
-Mouse loses all it's custom settings.
-Login items are gone, I have tried not to re-enable those.
-Shut down takes about 10 minutes as well, while I see only the blue screen of shut down...
It seems that it is losing more and more settings every day. Today I had to turn on time machine again, although it was on before shut down...
Is this like losing an application support folder or something like that?
Applications do not seem intact as well.
Safari loses all web screenshots from cover flow iTunes reupdates the library etc....
What's up witn all these?
I updated my late 2012 27" iMac from the latest Mavericks to Yosemite. now it takes 30+ second between mouse click and action. For example, if I click on iTunes it takes 30 seconds to a minute before iTunes opens. I get the pinwheel while waiting. I rebooted and the startup hangs on the progress bar for several minutes, then black screen for several minutes, then eventually gets to desktop.
Info:
iMac, OS X Mavericks (10.9)
My iMac takes 3 minutes after logging in, until it allows any inputs. Stays stuck on the desktop, none of the hot corners work, nor does the dock allow inputs for about 3 minutes. I checked the Console immediately after it allows me to, and theres a bunch of stuff on the IOkit that seems to be the culprit.
View 5 Replies View RelatedHave my iMac since March and absolutely no problem. Installed Snow Leopard this weekend and worked just perfect UNTIL I turned the machine off. The next day restarted my computer and now takes about 2 minutes to boot up/then when screen comes up it is frozen for about another 2-3 minutes before can start using it. So basically, takes about 5 minutes from start up to being able to use my iMac. Spent an hour on phone with Apple on Monday night--they really tried--but couldn't fix it and now want me to bring to local Apple authorize dealer to work on it. Called them and they think it is the hard drive going out. But just doesn't make sense---worked just fine until I loaded 10.6 and then turned off machine. Before I bring it in and have them open it up and fool with the internal hard drive---DOES ANYONE HAVE ANY IDEA'S WHAT IS HOLDING UP THE STARTUP.
View 4 Replies View RelatedTwo days ago i installed Mavericks on my MacBook Pro and since i did it, my mac runs very slowly. The pointer goes slowly and it takes a lot of time to load the programs (safari, word, etc.). It takes also longer time to start up my mac. I've checked on the activity monitor and the system activity amount is so high, around 80%. But what i've discovered is that when i plug in the charger, my mac suddenly runs faster and i've checked again the system activity is only around 1-2%. How can i make my mac runs faster even when i don't plug in the charger?
MacBook Specification:
MacBook Pro 13-inch, Late 2011
Processor 2.4 GHz Intel Core i5
Memory 4 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
Software OS X 10.9.2
When i start my imac it took about 10sec to be ready to use but now it takes about 1min
View 11 Replies View Related-Got the iMac refurbished in mid-2010 (2009 iMac i5)
-Originally planned on mainly using Windows, so I partitioned the drive to 750gb for Windows and the rest for OSX
I eventually got fed-up with certain things about both Windows and certain limitations/glitches within Bootcamp itself and decided it was time to go OSX, and use the machine properly in all it's Apple glory.
I removed the 750gb of the Windows 7 partition, restoring the whole thing back to OSX. At this point, my computer seemed to be working fine still- OSX would boot up in about a minute or so, nothing that seemed out of the ordinary. After that, I still wanted a small partition with Windows 7; so I partitioned 100gb of my drive and proceeded to install Windows 7. During the Windows 7 installation, as had happened the first time I installed Windows 7 with Boot Camp, I got the "Black Screen" issue. If you are unfamiliar with the issue, see here:.......................
my iMac won't turn on. The day before yesterday happened the same thing, but after a few tries with the power button, it eventually turned on - and all ok yesterday. Both the day before yesterday and today, the general power was turned off for some minutes, but the iMac wasn't running. So now, I've tried to reset the SMC, removing everything attached, but nothing.
At least I can clearly hear the tic tic tic button, probably of the timer, because I set up a schedule to let it turn on at a certain hour. What can I do? It's a white iMac, never had a problem.
It seems that my MB(unibody 2.0Ghz) has some problem. I recently reinstalled leopard (and some softwares). It takes a little bit more than 2 minutes to boot. Worse comes with Windows 7 beta. I tried both 32bit and 64bit versions. It takes more than 5 minutes to boot! I saw some guy showing some comparison of boot time on youtube. It seems that Leopard should take < 1 minute and Windows 7 takes < 2 minutes (with the same hardware!). My MB takes around 3 times more than other MBs. Where should I start? I recently ran memtest and it turns out to be okay. HDD S.M.A.R.T also reports 'verified'. I'm not sure what would be the next.
View 3 Replies View RelatedAre there any suggestion on why my imac (1.5 years old) takes 15 min to shut down and how to stop this from happening? I have not had it on the internet for about 6 months and now if i connect to the internet it take 15 min to shut down. If i haven't connected to the internet it's fine.
View 4 Replies View RelatedI'm just not having luck with my last 3 MacBook Pros. My new 2.8ghz 15" now takes over 7 minutes to boot to the login screen. Before this happened, I recently copied 139 GB in sound libraries to my system drive. Before I went to work, I quickly closed the laptop and put in my bag. When I took it out of my bag several hours later, the unit was off and battery practically at full charge. When I started it shortly afterwards, it took forever to boot. It would sit there at the grey screen with the spinning circle, then get to the blue background (just before you get to the login screen) and wait there for a while. Most of the time I think you can hear the hard drive churning.
Once you log on, everything seems to be normal. I'm curious if perhaps that 139GB copy did something to the OS to slow it down. FYI it has 274/ 500 GB of free space left. Perhaps the hard drive didn't have a chance to park when I quickly put the laptop in my bag and I damaged it? To complicate matters, I have the MCE optibay installed with a 320 GB hard drive loaded in it. The only thing I can think of is to back up, and reload the OS. This should tell me if it's software or hardware related.
My imac has slowed down overnight - it takes ne 2 mins just to open safari.Ive run a virus check and all that.
View 9 Replies View RelatedAs above. Takes forever to boot, Painfully slow, low HD message despite showing over 600 GB available. .
Info:iMac (27-inch Mid 2010)
My 3-weeks old Macbook Air is taking almost 10 minutes to get from switch on to the log on screen, it seems to be stuck at the white screen with the Apple logo & the spinning grey wheel. Anybody faced similar problems before? What caused this? I was working with about 7 or 8 different Excel files open at one go and a couple were corrupted (but repaired). I have never experienced anything like this with my i5 iMac and wasn't expecting this on the Macbook Air. Any light at the end of the tunnel?
Info:
MacBook Air
After starting up my Mac Pro, I notice slow start up, and that the mouse does note respond for several minutes.
Info:
Mac Pro, Mac OS X (10.6.8)
I turned of my mac the other day, it took 5 minutes to turn on. Bluetooth wouldn't work and the keyboard and mouse can't connect without it how can I turn it on? I have a small USB mouse to scroll around but how can I turn it on without a keybord. I looked on the bluetooth menu it just said bluetooth no available.
View 4 Replies View RelatedFor some time now mail.app takes over 3 minutes to quit. Whenever I try to shut down my iMac the shutdown is aborted because mail.app has not closed so I have to wait until mail.app closes and then shut down.
Info:iMac, Mac OS X (10.7.4)
If I let the system boot normally, it boots as fast as usual. And no problems during work, either. But if I boot holding the "Option" key pressed, the startup manager screen takes about 3 minutes to show up. When it does show up, however, it works as expected. This happens even if I have no external devices connected at all.
Info:
Mac Pro
I just went to start up my MacBook Pro with the power button but nothing happens.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
I have a mid 2011 27" iMac that is taking longer than 3 minutes to boot. I've tried turning off everything in the start up menu, but that hasn't worked. In one of the other questions like this, Linc, I believe said to go to terminal and post to questions the output showed up in Text edit, and I have posted them below:
Step 1:
Loaded kernel extensions:
com.logmein.driver.LogMeInSoundDriver (1.0.3)
Loaded user agents:
net.culater.SIMBL.Agent
com.seagate.SeagateStorageGauge.plist
[Code] ....
Info:
iMac (27-inch Mid 2011), OS X Mavericks (10.9.1)
It takes about 2 minutes to have network connectivity after my system starts up. Is this normal for a macpro? I don't have that problem on my macbook pro.
I have the early 2008 release MP. get the network connectivity to start as soon as desktop is displayed like my macbook pro?
apple during startup there is a "working bar" that the cpu has to go through and this takes 6 minutes every time. I never used to have this one until I installed a new graphic card.
View 3 Replies View RelatedI got West Wing stuck in my computer. I'm on an Intel Macbook (No Open Firmware >_<)I've tried:
1. Using a credit card to keep the CD from spinning.
2. Ejecting the CD in every program I can think of.
3. Going into Terminal and entering the eject command.
Whenever I boot up my computer, it takes about 20 minutes before my computer gives up on trying to eject the CD. I've tried pretty much everything. I'm trying to avoid taking this to the Genius Bar if possible. I'm a college kid and as such can't really afford to lose my computer for them to fix it. Anyone have any other suggestions? (i.e. is there a manual eject that anyone wants to suggest? Or anything else?)
2 days ago my computer stopped being usable. It is the slowest thing ever now. Spinning wheel all day long. Takes 8 or 9 minutes to restart... Crazy lag time even opening a finder window. NEVER ran slow before. No new software installed...
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.3)
