My HDMI cord is attached an works fine. I upgraded to Mavericks and the display came up on my TV. Now today it won't come up. I rebooted and no better!
Info:
MacBook Pro (15-inch 2.53 GHz), iOS 7.1.1
I have been using this keyboard shortcut which is Command-Shift-L for bullets in Outlook, Notes and almost any word processing applications. All of a sudden this seems to have gone and now replaced by a Google Search. I tried researching a lot on the internet and found many articles which confirmed that this was indeed a keyboard shortcut but I couldnt find even one which could tell me what happened to it and how to make it work again. I've got so used to this shortcut because my work involves mainly around drafting emails and documents.
I have Macbook Pro Retina 13inch 2013 model & running Mac OSX 10.9.4 OS.
Now I did find one website link which told me how to disable the Safari trigger for this shortcut and I was successful in removing that shortcut. But I am stuck at the point where it's just blank. So now when I press these keys, nothing happens because no shortcut is set to it.
I've already gone through many links which say create paragraphs, some links also say that Option + 8 key works for the bullets but that doesnt work for me either. However, I dont want that too. I would want the original shortcut which was there and how to get it back or even configure it back to the way it was.
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
Reset does not work. Turning off extensions and plug-ins does not work.
Safari simply does not load pages after 10.9.3 upgrade even though Firefox works fine.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
I recently changed the primary email associated with my Apple ID and then reset all my devices to reflect this change by signing out and reauthenticating for iCloud and iTunes/App store. The problem is that no matter what I do, nothing seems to get my messages syncing from my mobile devices to my MBP. I've chekd to ensure the accounts are showing up and active on my iPhone and on my MBP based on the instructions and suggestions found. The most frustrating part is that the preferences in the Messages.app are greyed out along with the accounts so I cannot access them to configure.
My last ditch effort was deleting the plist files associated with Messages.app, but this also did not work.
Info:
MacBook Pro (15-inch Mid 2010), OS X Mavericks (10.9.3)
Using OSX 10.9.3 on my iMac. Processor 2.7 GHz Intel Core i5, Memory 16 GB 1600 MHz DDR3. Fairly new iMac, 21.5 inch, Late 2013. Just now, my right click function on my mouse does not work. I have checked my System Preferences and the right click is checked under secondary click. I did uncheck it, exit System Preferences, and then come in again and re-checked it, but that did no good.
I did restart my computer last night before I quit for the day because recently I uninstalled Sophos Anti-Virus because it seemed to be caught in a loop that was not finished "cleaning up" but that is only change I have made. Aside from the Sophos acting wonky there were no other issues with the machine last night.
The right click does not work in all programs, not just Finder. How can I get my right click function to work again?
For a long time I was running Firefox 3.0 just fine, until a few months ago when every time I tried to open it, it froze up and I had to shut it down. I removed it and installed Firefox 2.0 which was fine for a while but I would really like to start using 3.0 again.
Does anyone know what the problem could be? I've tried uninstalling and reinstalling, deleting my Firefox profile, etc.
I'm on a PowerBook G4.
I have suddenly got no access to my mac.com email account I can neither send nor receive mail.
None of my settings have been changed. This has been the case for 2 days now.
Safari is working fine so my internet connection must be OK. except I cannot access my mail via safari either.
My safari is version 4.1.3 My mail is version 2.1.3 I am using a powerbook G4 so cannot run newer than OSX 10.4.11
Info:
PowerBook, Mac OS X (10.4.11)
I been using Mac all my life, I have boot camp with Windows 7 X64 install and my leopard is running X64. I been using my windows 7 more than my mac spent 4 month straight using windows (windows put cocaine in there to get us hook). Any way one day my friend wanted to play a game of age of empires on Mac since he doesn't have windows so I boot in mac fine after a swift victory. I boot in mac and windows no longer works: blue screen of death so I reinstall after a few weeks I go back to mac to update and I check my windows partition from my mac all I see is 1 file with weird symbols? I go back to windows and it crashes again. So I figure it my bootcamp has a problem or it my mac side.
View 1 Replies View RelatedI want to read disks I used with an imac v. 9 but my floppy drive no longer works. It was/is a smartdisk model fdusb-m (the one that came with different color tops to mix and match with an imac).
View 1 Replies View RelatedTitle of the post says it all really. My printer is one of the ones supposedly supported (x4690) and it works fine when connected by usb, but not wirelessly. I have tried everything I know to get this working.
The only clue I have is when I try to print and run a log, it says
Stopping job because the scheduler could not execute a filter.
E [30/Aug/2009:14:17:13 +0100] Unable to execute /usr/libexec/cups/backend/lexnet3: insecure file permissions (0100755)
I've tried to submit the problem to Lexmark, but the 'submit' button doesn't work on their website,.
the update feature on the apple app no longer works. It starts then immediately stops. No message. but it has updated the same verison of iTunes a dozen times even thought it is listed as installed.
Info:
MacBook Pro, OS X Mavericks (10.9.2), purchased in 2009
I have found that the search function in mail.app no longer works. I can type an email address or name etc that I know for a fact is there but search fails to bring back any results.
The company I work for has a system where whenever an email comes in it is read and then placed in a folder in mail called 'Completed' so we know the email has been seen by someone and acted upon.
I noticed that occasionally the search function would not work and then I found it was getting worse now it simply no longer works. I think the best it manages is 2 characters in the search field then as soon as you type a 3rd it says no results found.
Is there a way to rebuild the database or something? Is this a common fault?
Without the search function I now have to manually search nearly 6000 messages.
After upgrading to Snow Leopard a program I need for my job no longer works. The program is Webex. They claim that it should work by opening Safari in 32 bit mode or with Firefox, but neither option works for me. My plan is to reinstall Leopard (10.5) on an extra partition and reboot into it whenever I need to start a Webex session. I don't think this will cause any problem with my Snow Leopard partition, but thought I would check first.
Information:
Mac Pro early 2009 quad core
12GB ram
4 internal drives
I have just upgraded to 10.7.3 and Preview no longer works properly in that I cannot save any files when I try to Scan.
Info:
iMac, Mac OS X (10.7.3), 2.5 GHz Intel Core 15
Still using the iMac we purchased about 5 years ago, and it's working fine. About a year ago, the numeric keypad on our wired keyboard stopped working. Anytime one of the keys was pressed on the number pad, the whole computer would freeze completely, and would have to be restarted.
A few weeks ago, we decided to stop tolerating this, and purchased a new wired keyboard with the numeric keypad. The numbers still don't work, and all the F buttons don't either. The volume controls don't work, and I've tried reconfigurating them. But they only end up working in iTunes.
We plugged back in the old keyboard and the same thing happened. Number pad doesn't work and the volume controls, etc. don't work.
Called Apple and they told me to call the store. So I called the Apple store we purchased the keyboard from, and they had no idea. Just told me to return the keyboard...
I don't want to have to try installing programs to get this to work. It really should be simpler than that.
Info:
Keyboard with Numeric Keypad, Mac OS X (10.5.8)
mail no longer works after 10.7.3 update
Info:
Mac OS X (10.7.3)
During the week my macbook hard drive bit the dust. I had a new hard drive installed today and I migrated my old data over to the new drive from backup when I got it home. So far so good - except when I try to log-in to my migrated user, the password simply doesn't work. I've tried lots of alternatives, even though I'm 100% sure I know what the password is. It's simply inconceivable that it can be anything other than what I think it is!
I tried resetting the password of the user account in question through another administrator user account, but even the new password doesn't work when I log out and try to log-in to my old user again. I've tried going in through the master password (honestly, I have no recollection of even setting a master password) but nothing that I type in works for that either. I only have a very limited pool of passwords and I've tried them all.
I was running Lion on the account I'm trying to re-access from my old hard drive, but the new drive is running Snow Leopard. Could it be something to do with this? Failing that, is there any other way to reset the password?
Info:MacBook
My iCloud mail on my iMac no longer works, yesterday it just stopped. I go tth eiMac in mid 2007, same iCloud email account works on a mini mac i purchased last summer, solutions?
Info:
iMac (20-inch Mid 2007), Mac OS X (10.7)
The escape function no longer works---any work around ?
Info:
MacBook, Mac OS X (10.7.3), New airport express
I have used Google for years and Safari. I use Google search as my home page. (the same issue occurs if I go to google)
When I enter a search item in the search bar; the search bar shifts to the upper left corner of the screen. Then, my items appears. However, no search occurs. When I hit search, nothing happens.
I switch to Firefox and my Google is working fine. I downloaded the most recent Safari. No change.
Info:
MacBook Pro, Mac OS X (10.7.3)
I upgraded to Lion and now I can't VNC into my macbook pro from my PC. It connects but it displays a background or some kind of basic wallpaper image but I can't control anything?
Info:
MacBook Pro, Mac OS X (10.7.4)
It stopped working on my macbook air sometime within last month. Still works just fine on my iPad and iPhone. When I try to be sure I'm signed in it says my apple id can not be used to set up iMessage at this time with the customer code 3778-3798-0955. 800 support unuseful.
Info:
MacBook Air
I have used an external 23" monitor with my macbook air for almost 2 years, i have had a few issues, mainly just temporary blackouts lasting for just a second or two, but also seen red screen (all colors become red), this was however just a rare issue and usually it was working just fine.i borrowed a friends macbook and connected with the same cable to the same screen, and it worked immediately with no issues.
the screen would go completely black or start flickering (haven't seen this flicker before), and i had to fiddle around with reconnecting to get it working. the next day when i turned it on i had no picture, i tried again and still nothing, so i decided to install the updates, including thunderport firmware update. Now i got the old glitches and lots of new ones, at the times when i assume it would have worked before i am just getting static (black and white dots randomly everwhere) i can also get red'ish screen with instense flickering, but mostly just completely black. I thought the problem could be my cable or the monitor itself, but that's not the issue since those worked immediately without any problem on my friends computer, so it must be the macbook air itself!
Info:
MacBook Air (13-inch, Mid 2012)
I bought a pre-owned iMac, late 2011 running Lion, took it to the Apple store to have the hard drive wiped and Lion re-installed. Then I brought it home and migrated files via Time Machine over from my Mac Book Pro , early 2009, running Mavericks. Now my log-on password no longer works. What happened?
View 2 Replies View RelatedThe heading says it all. Is there a fix? Expand Group used to work every timethen only with some groups, now not at all.
View 3 Replies View RelatedI just upgraded to Snow Leopard (OS 10.6.1). I have an HP DeskJet F4280 All-In-One. It used to work great under 10.5.x, but now it will print fine but not scan.
If I launch HP Device Manager, and double-click Scan Picture, HP Scan Pro window opens, but I get the following error: Sorry, scanner could not be initialized (Scanner not found.).
If I press the hardware Scan button on the top of the unit itself, the power light blinks rapidly for about 10 seconds, then reverts to its normal state, and nothing else happens.
If I launch Image Capture 6.0(424) I get this error: No camera or scanner connected.
Under System Preferences>Print & Fax>Scan a window opens that reads HP Deskjet F4200 series and I click on Scanner, but it says No scanner selected.
However, System Profiler lists Deskjet F4200 series under USB High-Speed Bus, and, as already mentioned, the printer works fine.
PowerBook G4 Ti:Where can one look up the meaning of diagnostics codes? HDD diagnostics error code: ata1/6/3 HD:2,0 What does a single blinking LED on the battery mean? AppleCare does not show the HDD, chance it is ok but not connected? A friend's system wouldn't start up, he said I could take a look, asking me to recover some family photos from his Hard Disk Drive. This machine had not been used for months. So far I have uncovered two issues and would be grateful to receive further guidance here to get this machine up and going.
service history: 3/10/2005 = repaired directory errors, charged clock battery, installed optical drive. action: Remove PRAM battery and it powers up. I like to tinker, and I'm recently out of work, stumbled upon a place with step by step instructions to take apart at <http://homepage.mac.com/sysop/PhotoAlbum13.html>. Followed those steps and removed the persistent RAM (PRAM) battery, put it all back together ( except for a few screws, oops! ) and it powers up, and seems to be charging the battery as an LED lights up now. Took it apart again and checked Hard Disk Drive connections, appears ok. Put the PRAM battery back in ( battery shows: 616-0144-A, match to slide 35 ) and now the system boots ok. Maybe resetting the connections got things going, maybe the battery needed a kick, who knows............
My Samsung ML-2510 stopped working when I installed snow leopard. I've tried the following, after finding others with similar problems (before snow leopard).
1. re-installing the driver from the Samsung website.
2. deleting the printer from the "printer & fax" pref, then adding it again, selecting "print using..." the new driver from the drop down menu.
3. downloading the Samsung Drivers from the apple website
Did a fresh install of Snow Leopard on my Core Duo MBP, and installed ShhMBP to get rid of the whine. When I restarted, I received an alert stating:
Insecure Startup Item disabled.
"/Library/StartupItems/ShhMBP" has bot been started because it does not have the proper security settings.
Any other MBP users have this problem? How can I apply the appropriate security settings?
After updating, seems that my iSight camera no longer functions. In iChat, the user on the other end had no video from me, nor did I have a preview. In Photo Booth I get nothing but a black screen. The green LED indicator still functions as if the camera was on, but no image at all. I tried zapping the PRAM and resetting the SMU or PMU as well, but with no luck. It acts as if it's functioning properly with the light activating and system profiler recognizes the iSight cam in USB devices.
View 7 Replies View Related