I changed my trusty Powerbook for a newer MacBook Pro 2.33 GHz Intel with 2GB 667 Mhz DDR2 SDRAM (that's what it says) running 10.5.8, so I could run CS4 Photoshop, Dreamweaver etc etc. I just cannot work with it! Everytime I try to do anything, I have to wait while the wheel of death decides to show me a menu, scroll up the page, select and delete an item, etc. etc. you get the picture. Quark and Illustrator seem to run perfectly ok.
My computer stopped charging and turning on a short while after it was dropped.Â
I bought a new charger and my dad managed to fix it. (after i was told by a tech expert at a dodgy asian store the main processer had to be replaced)  The only issue im having are. The spinny wheel apears in almost all tasks, internet , browsing flies , clicking top tab.Â
It only appears for about 30 seconds then goes away, sometimes freezing completely, It seems to happen less when the computer is stationary but still will happen quite often even just typing text. Logic Pro after reinstalling refuses to Open. Music sometimes freezes skips for 5-10 seconds.Â
I did some research and try a few things its not the CPU usage cause i been checking using that program that checks. Is there a way i can check what part is failing through software or maybe do a general clean up? since it was reformated.Â
Do i need to get a new computer or just a replacement part if i eliminate all other issues? Or could it be the start up drive? Â
Why my safari freezing on me daily? I am often opening new tabs and viewing 4 or 5 pages at once, and while they are loading it seems to be stuck on the annoying spinning rainbow wheel, ultimately leading me to end the program for not responding.
When I start up my iMac, it runs ok for a good 3-4 minutes, then all of a sudden when I try to click somewhere, I get the spinning wheel of death for about 2-3 minutes. Then when I click somewhere else I get another spinning wheel of death for another few minutes. This goes on and on and the computer is basically unusable, unless I want to wait 30 minutes to complete easy tasks that should take 2 minutes.
I tried resetting the ram by holding apple-option-P-R while restarting, but nothing is working. I have a good 15% free on my hard drive.
I'm currently using Win 7 on my partitioned drive since I can't get OS X to boot. Here's what I did to screw everything up: Installed SL awhile back without performing what people here are referring to as a "clean install" (I had lots of third party apps installed). Things seemed to be working fine, though Finder seemed to lag more in 10.6 than it did in 10.5. Today, however, I tried updating Parallels 4.0. It required that I reboot in order to finish the installation.
But, when the Apple logo appeared, that damned spinner just wouldn't stop. [Perhaps Parallels is "tainting" the kernel?] First, I tried reinstalling from the SL Install DVD. No luck there. I tried downgrading to 10.5 (archive and install). Still didn't boot. I even tried several volume repairs. Those didn't help either. So, now I've heard that some users are having luck booting in safe mode. But, if I try that, will I be able to transfer data to a backup drive?
I have a macbook 2.1ghz with OSX 10.5.8 running with 4gb of 667mhz DDR2
Recently I have been getting spinning beach balls of death on a constant biases. They come when I try to open web pages such as [URL]... ANYTHING actually. They come when I try to open applications, they seem to come when I try to do almost anything. I cannot force quit when they come. I have tried waiting for them to go away, sometimes up to an hour and nothing happens. They have come when I try to open utilities to try to figure out what is wrong. They come in safe mode.
I freed up hard disk space, over 60 gigs of the 120 gig hard drive. NOTHING.
I am getting the spinning wheel of death on most applications at the moment. I have read about the varios ways to trouble shoot but they do sound quite involved eg going to the utility monitor and have tried that but did not get very far with it as I dont understand the menus.
I think my hd went out. I have a G4 dual 1ghz (pretty sure, can't see it right now) mdd, os 10.411, and it froze up so I did a hard restart: hold the power button for 10 seconds till it shuts off. When I turned it on the next time it would not boot up. Gray screen withe the spinning wheel of bars like it is thinking, searching, and longing to start up. Booted from the install cd to access the hd, but it acts like it wants to install the os fresh.
My imac has just all of a sudden stopped working out of the blue. It was working fine yesterday and then just froze with the spinning wheel of death.
After a long long time it still was frozen so i held power button for 4 secs to power down.
PS: i am running snow leopard up to date on both macs.
I tried to power up and it has random start up issues.
1) It sometimes has the flashing folder with question mark and grey/white screen
2) It sometimes has the plain blue screen
3) It once out of the last 30 attempts to boot goes to the desktop and i noticed my wallpaper had been reset to default mac one. - Every move i made had the spinning wheel and i did not get past loading Firefox and it froze again.
I have tried resetting the PRAM from boot disk but did not help. I ran Disk Utility from boot disk and repaired permissions and disk. No change in imac..
I have also tried pulling out one o the 4gig rams and booting and still the same problem so im guessing the ram is ok??
I have tried connecting imac to my macbook pro via 6 pin firewire cable and booing the imac into Target mode but the imac never appears on the macbook pro desktop to access files. The cd-rom appears showing the disk in the imac and i could eject it from the macbook pro. So looks like the target mode boot works, kind of..
I am running out of options and found out today my imac is not under warranty anymore.. !!!!! $%#%$#%
I have 2 MBP's, a Mac Pro, and a Mac Mini. On all of these I use a Logitech Trackman Wheel with. I updated the first 3 machines to Snow Leopard and the Logitech Trackman Wheel continued to work fine. I then upgraded the last MBP to Snow Leopard. For some reason the scroll wheel no longer works on the Logitech Trackman Wheel. I am able to use the ball to move around the screen, the buttons still work, but the scroll wheel won't work.
Well my 2006 1.83 C2D died last week. I don't think it's the HDD, I believe it's the logic board.
When I boot the machine I get a grey screen with a spinning wheel for infinity. A day before it was doing this at reboot but after 10 minutes or so the logon screen would appear and hte machine would work normally.
The 160GB HDD in the machine is less than a year old having replaced the 60gb drive that fried back then after 3.5yrs hard use.
The machine is no longer worth salvage IMHO and I've ordered a new MBP to replace it, but I need some of the data on the old drive, such as the contents of mail and iPhoto.
If I plug the old drive into a USB cariage and assuming the drive is not duff, is there any easy way to migrate the data?
My new to me macbook (2010 MBP with 2.53 i5 running lion) runs great other than if I let it go to sleep for more than 5 mins it will give me the 3 repeating beeps until I hold down the power button and force a shut down. It never does this when turning it on from shutting it down, just waking up. I also checked the ram and made sure it was seated correctly.
I've been experiencing the "gray screen of death" every time I've turned on my laptop. What would occur is that after I press the on button, I would hear the two dings and a gray screen with a metallic apple logo and a gray pinwheel would appear. It would stay on for however long I've had the patience for it (more than an hour) and disabled me from using my computer. After doing some research, I've tried everything I could besides for rebooting the computer to factory mode. I've tried doing a safe boot by pressing the shift button upon turning on the computer but this didn't work because the booting loading bar would appear and then disappear midway. I've tried doing a repair on my hard drive using disk utility.I've even tried reinstalling Mac OS X (Snow leopard), which was successful, but upon restarting my computer, I was greeted with the same gray screen and nothing appeared to have changed. I have also tried resetting the PRAM but that didn't work either.
About two weeks ago I'm using my snow leopard partition of my macbook pro and browsing the internet via firefox. My mouse freezes for a second, and then my computer just shuts down. I power back up my macbook pro to find a 'cancel or prohibitory symbol'. Strange thing is I can hold down option and boot into my windows partition no problem I go through all the motions suggested by the apple website, such as resetting the PRAM etc.. Nothing works. Flash forward to today. I finally get a hold of my snow leopard installation disc and boot my macbook with it. I run the disk utility and it finds that my hard drive's good to go.
I read online and it seems that the best option would be to install snow leopard again. I decide install it again, but about halfway through the installation, the installation fails and pretty much freezes. I had to shut down the macbook via the power button. Now, whenever I try to boot up my macbook I hear the chime, but nothing happens after that. I am just left with a grey screen. I cannot enter safe mode, single user mode, and when I try to choose the start up disk by holding down option, the arrow pops up to choose which disk to pick, but there are no disks to choose from.
just posting for some basic advice, or technical help.... I keep getting a grey screen of death its happened 3 times in the past 2 weeks, the computer resets ok and then works fine for a while .... but i don't know whats going on ... or how to check for any problems ? ? I never had this problem before, I have discovered a small dent in my rear cover near the CD drive slot, I dont know when this has occured, maybe recently ... but its minor... almost invisible ... the laptop hasn't been dropped or anything like that and I assume its happened whilst in my bag so no serious shock .... ..I don't know if this has any bearing on anything �I got a report and have posted it below : it says its processor ? ?Tbh Ive found this laptop to be very slow on certain things since I have had it, esp when launching finder �. or the dashboard, it take forever to fill in the information and finder takes ages to fill in the mb in each folder or to load the app icons and often crashes , which Iwouldnt expect with a I7 ... but this has been like it since the start so assumed it a osx bug ..., can anyone suggest anything ? ? or what i should do, i dont want this happening in the middle of working on a video project etc .
My Macbook Pro display all of a sudden went to the 'white screen of death' as I've heard others refer to it as. I've tried zapping PRAM, resetting SMC etc. to no avail. When I connect an external monitor, I am able to use the Macbook without problem, so I know it is video card/controller/display related issue. I'm going to send the Mac in for repairs. But before doing so, I'd like to erase my hard drive so I'm not sending them all of my data with the computer. I've done a time machine backup, so all is fine there as well.Â
My problem, is that in order to erase the hard drive, I need to boot from the OSX install disk. No matter what I try, I can't do this with my external display. If I insert the disk, and hold down the C, my Mac never recognizes the external display plugged in and so I cannot see to get to the disk utility tools on my OSX install disk. I've tried using Command-display dim button, to no avail.Â
I've tried simulating a clamshell mode boot where I close the lid as soon as the boot starts (with the OSX install disk in the drive) and I get a kernel panic every time. Even if I didn't, I don't see how I can close the lid at startup and hold down the C key at the same time. Â
I have a Black MacBook (Early 2008). I think that I still have the factory standard RAM sticks (I bought the Mac used from a friend). I noticed today that I am running on only one gig of RAM even though I have two gigs of memory.
The other day my 1st gen MBP functioned without any probs, until it suddenly powered down. After I removed the question marks from my eyes, I offcourse tried to reboot it.
But it never makes it beyond the grey screen, sometimes untill the apple logo, sometimes not even that far. Offcours I googled around first to gather some info before I decided to put this problem down on this board. I found this could be a HDD failure, but in those cases, with other people, it could be powered holding apple + s, and doing some checks that way. Mine doesn't even come that far
I have a second hand 1st gen MBP with upgraded HDD and RAM, snow leopard, and coincidently since last week no more battery... so i may have powered down a completely unprepared mac by tripping over the wire, once or twice...
I have a late 2007 MacBook running OS X 10.5.8 that I upgraded with a Hitachi 200GB 7200RPM drive not long after I purchased it. It's been working great until about a week ago when I noticed a very quiet and frequent clicking/whirring sound coming from the drive as I was using it. My first reaction was that it might be the "click of death," but I wasn't getting any errors or having issues booting the machine, and the clicking was very periodic and not sudden like a drive crash. I verified the disk using Disk Utility and it checks out. I then opened up Activity Monitor and started watching the Disk Activity and sure enough I see a big red spike in I/O Data Written every time I hear the clicking sound, which is about every 20 seconds or so. Is my drive actually dying a slow, clicking death, or is there a rogue process writing to the disk and causing the sound? Is there a way to find out what it is?
So I encountered the grey screen with the spinning wheel 2 days ago. I am using a MacBook Pro (Late 2011), I bought it only 2 months ago. I have tried to reset PRAM, booting the computer with; shift, command v, option, command r, command s, and re-installing Lion from Disk Utility. My last and only way out of this seems to be a reformating of the Hard Drive
I have never backed up my Macbook 2.1 duo before yesterday. While in the process of backing up I was using photoshop, and my computer froze. I waited 30 min and then decided to shut it down. When I tried to turn it on it will not boot-up, I only get the grey screen of death. I had just recently upgraded to Snow Leopard this week. I used an external DVD drive which seemed to cause issues. So I thought I might be able to use that to install a clean version on this busted drive, well nothing worked, tried holding option key, holding down the C key. I ordered another drive that says its compatible with my drive. Since the my mac doesnt seem to acknowledge my drive, I bought an external housing for my new internal. I want to format and load Snow leopard onto the new hard drive using my girl friends mac. then put in my macbook. I would like to know if this will work? how I need to format my drive in disk utility.. Is it possible that it is not my Hard Drive?
Another side note, I just upgraded my RAM from 1GB to 4GB on my Macbook 2.1, I did try and putting my old ram back in just incase that was the issue.
I posted this in the emac forum, but since it concerns the OS....thought I'd also post here. have an older emac 700 that used to work, but now when I try to boot ...after the apple screen with spinning wheel I get the gray screen of death. I have tried lots of things, including reinstalling OS from a retail purchased 10.4 dvd. THe OS install *looks* like it is working until it goes to reboot at the end, & then hangs again. I have also tried booting off a firewire drive, again, hangs. I know that there are boot cmd-v or -s options that give readouts of what's happening, but I don't know how to pause the process & whatever messages of relevance may be present near the end disappear quickly when the screen turns gray. In the process I have also zapped the pram/nvram.....& have reset the pmu button. I'm at the end of my rope, as I'm all out of things to try. As for what I was doing when the whole thing went south on me.. I was playing with a newer Belkin usb wireless adapter & trying to find the right driver. I downloaded the Zydas zd1211 driver set, but inadvertently unpacked the 10.3 version instead of the 10.4 (which is what this emac has). It went into auto reboot & that was that.....gray screen of death. Coincidental? I dunno. I just include the detail.
The privileges have been verified or repaired on the selected volume Verifying volume �The Love Machine� Checking HFS Plus volume. Checking Extents Overflow file. Checking Catalog file. Invalid key length The volume The Love Machine needs to be repaired.
Error: The underlying task reported failure on exit
Disk Utility stopped verifying �The Love Machine� because the following error was encountered:
The underlying task reported failure on exit 1 HFS volume checked Volume needs repair
I am running Leopard (Not Snow Leopard) on a 2005 Power PC G5 (Pre-Intel)
I keep getting the gray screen that comes down and tells me to restart my machine in 4 languages.
I have tried PRAM/NVRAM, SMU and Reinstalling the OS but no change. Sometimes this happens 5 times a day. The fans also sound like they are working overtime while the screen is coming down.
I dont know where to begin. All of my frustration wants to come up out at once without any particular order! Since Snow Leopard, I have seen this "!" in the airport radar in the menu bar, so politely informing that i will not be able to connect to internet because.... I just received one of the latest model 13" mbps 3 days ago and till yet have not been able to connect to our homes wireless connection once! I dont know if this is a hardware problem or the fault of S.leopard, but after looking online (connected through the ethernet cable) i saw that many many people are having the same problem and it is attributed to S.leopard. I also had that intuition and have been inclined to think that that was the case. I tried every solution i could find online, and everyone i could think of separately (at present i am installing OS 10.5 on an external partition to see how it connects to the wifi...). I also called tech support who were of the opinion that low and behold the Holly Apple could not be at fault, but that it was my router/ modem/ service provider, (even though the two other apple laptops in the house NOT running S.L connect fine, as well as the other PC in the house).
I am currently stuck on the grey screen of death with the flashing ? file folder.I have tried resetting the pram etc. and when i boot from my snow leopard disk the disk utility does not recognize my HD. Is there anything else I can do to fix this? Or try?
So for the first time ever I power on my iMac and get a flashing folder indicating the system cannot find the boot disk. I reset it a few times and it eventually boots up. A few days later the same thing happens only this time I can't get it to boot up after many attempts.
I try all the usual suspects, reset PRAM, attempt to select boot device (can't find any) Finally I boot from the install CD and when I get to select a destination volume for the OS there are no volumes to select.
I shut it off for a few days assuming I'd need to take it to an Apple store for some kind of repair or hdd swap. However it just started up tonight when I passed it and decided to hit the power button. Should I do anything to it while I have it running? Would a fresh OS install do anything for me? I have everything backed up with Time Machine.
I just picked up a Mini display port to DVI adapter for my Macbook Pro so that I could hook it up to my 32 inch 1080p tv that I use as my main desktop monitor. It works just great in OSX (though for some odd reason I have to put the laptop to sleep then plug it in for it to work correctly. Can't be on or off otherwise I don't get the full picture not sure why) but in bootcamp it instantly causes a blue screen. If I plug it in then reboot to windows I get a blue screen even before its loaded windows all the way. I assume this is a driver issue but I'm using the latest boot camp drivers.
I have read lots of posts regarding the WSOD and know the fixes etc. But I have just bought a brand new mac mini (intel 2.4 GHZ dual core, 160 GB hd) with Snow Leopard and ilife etc all preinstalled. When switching this on for the very first time I got the white screen of death and had to hold the power button to restart it... then it booted fine and I was able to set it up.
