New here and new to Mac. Just purchased new imac and macbook pro for my at home small business. I'm looking for the best way to "network" the two computers to share all files printer etc.. Where can i find set up instructions and layout options etc.?
View 1 RepliesAfter a surge fried my beloved HP LaserJet 1320, I purchased an HP LaserJet P2055dn. This has a built-in print server, to my understanding, with an Ethernet port that would be available for me to connect to a router. I would ideally like to share this printer between my MacBook and another computer (an HP notebook PC running Vista). What's the best idea here? Please bear in mind one thing: the HP notebook has flaky wireless, so it might have to use an Ethernet cable at some point--thus I'd like to explore all of the feasible options.
1. USB to my computer and set up printer sharing?
2. Ethernet to my computer and set up printer sharing? (Does that make any sense? Maybe not!)
3. Get a wired router and, while the computer is on my desk, connect it to the printer and to the connected computers.
4. Get an AirPort Express and connect the printer up to the USB port. Now, we're using WPA2 on our wireless network here, and I thought I read somewhere that one cannot extend a wireless network that's WPA2. Can I hook up a printer to an Express that's a client?
5. One idea that especially intrigued me: Get an AirPort Express and connect the printer up to the Ethernet port, then set up network printing on all connected computers, rather than Bonjour printing. Again, network-extending question still applies--I'm really clueless here.
Since I *have* a network printer, would network printing (i.e., option 5) be faster/better/more efficient than Bonjour printing? Less software or drivers to install? or more?
'all of a sudden' (so it seems) my 2 printers in my network do not print printjobs from other macs in my network. It dit work. Nothing really changed, exept some system-updates.
print-share is on, awake out of sleep is on (network-tab). Really there is no reason that it would not work. Still, ... it doesn't.Â
config:
- imac 27" 2011, software updated
- macmini 2010, software updated
canon ip4200, works standard on imac. brother HL-2030, works standard on imacÂ
The charm of the set-up was that I could have my printers in the office and still print from the livingroom (mac mini)Â Â To try to solve the problem I moved the mac mini temporarily to the office, so I have it next to the imac.
Opening the section 'printers and scanners' and then pressing the '+' does however give me 2 differentviews:
- on the imac I get a sub menu, dropping down from the '+'
- on the mac mini I get a new window named 'add new printer' (this is hopefully the right translation - I am on a Dutch system)
This strikes me as odd. I never noticed this before. Maybe this is where the problem lies?Â
Info:
iMac, Mac OS X (10.7.2), 2.7 GHz intel i5 core 27 inch
I have a PC connected to my printer. I would like to print to that printer from my new MacBook Pro (OSX 10.5) across my wireless network. I have shared the printer from my PC, what do I do on the Mac end to connect to it?
Secondly, I would like to be able to share a folder from my PC and connect to it from my MAC to copy files back and forth. I would like to do the opposite as well (connect PC to a shared folder on the MAC). How do I do this?
I will be getting my first Mac tomorrow - a Mac Pro. I have about 750 gb of data I need to transferr from my PC to the new Mac.
I have used MRoogle to search MacRumors and also have searched the apple forums but I must be using the wrong search terms.
I will not have a network to hook both computers up to so network sharing will not work.
I have purchased two new 2 tb external HD to use as off site backups for my new Mac.
DO I need to format one of them for NTFS and put the data on it and then hook it up to the Mac and drag and drop or can I leave the harddrive in MFS format and still use it to move files to from the MAc? I just do not know how to do this?
I have been given an iMac g3 with osx 10.4.11 installed and airport card. My son will have this as his first computer. It is up and running and surfing the net using the airport connected to our home network. I have searched the forums and tried all the results I could find but am still unable to print from the iMac to my network printer.
iMac G3 10.4.11 osx slot loaded, airport wireless. Officejet all in one 6310 usb to pc running Vista. I have tried all the usual SAMBA and LPD methods listed going for generic printer, but get error 256 using printer utility, and NT_status_no_memory when using samba with all the settings, when trying LPD the printer service just stops.
I use LPD://user:password@workgroup/server/sharename and same for smb. I have set up a seperate account for the mac on the vista pc with password and started lpd service I've also edited the registry for lmcompatibility, printer sharing is enabled and both machines have the same workgroup name (WORKGROUP).
Got my first iMac 21.5" yesterday. Been a PC user since I was born (16 years heh), saved up money from work and made one of the best purchases ever. Alongside my iPhone 4.
Anway. My iMac (Running 10.6.5) is connected via ethernet to my router.
My Vista PC is connected to the router, via ethernet.
The Kodak ESP 5 printer is connected to the Vista PC via USB.
I'm trying to get access to the printer from my iMac. The PC and printer are both on.
I've enabled LPD on Windows Vista.
On my iMac if I attempt to add a printer through 'Windows' in the first column there are two names 'home' and 'workgroup'. These appared after enabling LPD. Sadly, when clicked no printers appear.
I am relatively new to Mac OS X. I am running Leopard, and I want to share a printer over IP. The printer is connected to my office's iMac, and I want to be able to print from my notebook as well (MacBook Pro). The problem is that my notebook connects to the wireless internet at work, and therefore it is not in the same LAN as the desktop. So I would like to share the printer over the internet.
I have already enabled "Printer Sharing" in the iMac (which has the printer hooked to it). I know the IP address of the iMac, and I have been trying to add an IP printer in the MacBook Pro using that address, but so far I have not been able to do it.
I've got 3 G5 iMacs, one with a USB printer attached. I can share the printer and add it on the other iMacs and print to it no problem, but when I restart them the printer is no longer in the list and I have to add it again.
This is becoming a pain, and with the old eMacs I had never had this problem. They are all on 10.4.11, am I doing something wrong?
I have an iMac (2gh Intel Core Duo) which I connect via USB to my printer (HP PSC 1500) when I go to print like this everything works fine. The problem is when I go to print from my MacBook Pro (2.4gh Intel Core 2 Due) wirelessly via my home network. I have turned on printer sharing on both machines and have the printer drivers installed on both as well.
When I got to print, I get the printer queue window open. It looks as though it�s trying to print and then I get this error message� �Fatal: opening printer connection failed, unable to open the printer connection, please check the printer connection and check the printer for errors�
The status of the printer then goes back to ready but nothing has printed.
Both machines are connected wirelessly to an AirPort Extreme Base Station.
I still can't figure this out.
I have a printer connected to my desktop running Windows 7 and have it set up to share the printer but on my Mac when I go to add a printer and click the Windows tab, everything is grayed out and nothing shows up.
We have 2 computers over here, one uses Windows Vista, the other is an iMac with OS X Snow Leopard. They're both connected to a hub, said hub is connected to the modem. The Windows machine has 2 printers connected to it, an HP DeskJet and an Epson Stylus.
Now, I would like to access one of those 2 printers from within OS X, so I can actually print without moving files between both computers through an USB stick or whatever. I've put both printers in Windows Vista on "Shared", but I can't seem to find them anywhere in OS X. So I guess I'm doing something massively wrong.
Below is a chart of how this "network" looks like.
So, is it possible like this to get access to the printers on the Vista machine from within OS X? If so, how do I properly set it up?
I have my cool new mac here and it's got a great printer connected to it via usb. My mac is accessing internet via an ethernet cable, awesome! I have internet AND can print on my mac. now we got the old family PC in another room and it really wants to print and have internet access. So I try to get my mac to help it out by using the built in airport to give it some wireless, and access to the printer via wireless. well I do that and the PC can connect to the shared network, but uh oh! we might have a few pesky snoopers around so I want to put the WEP on just to be on the safer side. Ouch, turns out PC and mac WEP aren't so compatible so what is my PC gonna do now. Well what it's gonna do is connect to local wi fi for internet, but now it can't print! I wonder if theres a way to SECURELY connect to my macs airpot from my PC or maybe theres a way to print wirelessly from my PC thats on a different network.
View 4 Replies View RelatedI installed an HP all-in-one printer on my server, connected via USB. In Serveradmin / Print I said to share it via IPP, AppleTalk and LPR. Other Macs on my network can see it, but nobody can print to it. They all insist it's a "generic postscript" printer and any discussion fails miserably.
A mac client installed a similar HP printer. Everyone else can see it and print to it.
Both my wife and I have MacBooks. Mine is the primary with an HP 3100 All-in-one connected via USB to it. I can print with no problem. I have tried everything possible to connect and allow my wife to print from her MacBook, but everytime she goes to print the job stays in the print queue with the notification 'Holding (Authentification Required) next to it. We both connect to the internet via WiFi, same codes, etc.
Driving me loco. Everything with Macs is just supposed 'to work'. It's just this one final step.
I'm trying to set up my old iBook G4 as a print 'server' for other Macs on my network. I'm having a problem getting the other computers on the network to SEE the shared printer from the iBook. They can see the iBook as a network computer, but can't seem to connect or even 'see' the usb printer. I've clicked 'Share Printers on the iBook in both Sharing preferences and the Printer and Fax preferences, but no luck.
View 1 Replies View Relatedi have a destop pc running windows xp and a macbook running leopard.
i want to be able to print from my macbook to the printer connected to the desktop pc wirelessly.
anyone know how to do it?
I had read an article explaining how to configure a Windows 7 PC to print to a shared Mac printer (in Snow Leopard, but I assume it's the same in Lion).Â
So I shared the printer (an IP printer) on my Mac, then followed the instructions to add LPR Printing to Windows 7. I went to 127.0.0.1:631 and saw the CUPS page on my Mac, and the setup the LPR port on Windows 7 with the IP address of my Mac and the Queue name listed for the shared printer in CUPS. Unfortunately, when I enter the port info and click OK, it comes back with the error page listed in the article.Â
I've tried this on two different iMac's (a new 27" and a much older iMac with Snow Leopard). I also used three different Windows laptops (Windows 7 and Vista), and all three gave the same error. Basically, when I setup the LPR port, it cannot "talk" and confirm the settings with the Mac.Â
I've turned off Windows Firewall, tried basically everything I can think of (and I'm a tech, so I've tried a lot!). Anyone successfully printed to a shared Mac printer from a Windows 7/Vista PC? Â
Info:
iMac, Mac OS X (10.7), 27", Core i7, 16GB RAM, 256GB SSD
I have a new MacBook Pro and while it "sees" the Canon printer, i am unable to get the printer to be shown as online. My System on my iMac shows Printer Sharing: Blocked by Firewall. Is there a way to allow these two Macs to print wirelessly? I'm running the current version of Yosemite on both.
Info:
Mac Pro, OS X Yosemite (10.10.1)
I have iMac connected to a MBP 13 by ethernet cable. Both Mac have 10.10.1
The MBP prints via USB cable to an Epson printer and the printing works well.
But the Printer sharing in the second Mac is not working as seen here:
This is the Printers and Scanners control panel
[URL]
and this is the Printer sharing which is unable to find the printer inside the iMac, even though it is there as shown in the former picture:
[URL]
Info:
MacBook Pro, OS X Yosemite (10.10.1), MBP 13 mid 2010
I'm having issues with using Internet Sharing on my Mac mini. It works perfectly fine for a while, then the connection drops. Printer sharing seems to drop in the same intermittent way. If I turn off Internet Sharing and turn it back on, everything starts working again. I'm running 10.6 on both the mini and the laptop I'm trying to get wireless internet on.
View 3 Replies View Relatedi'm using an airport extreme as my primary router for internet and everything, and i have a airport express set up in my bedroom for wireless music. i've set it up that the express is joined with the extreme so internet (from the lounge room) and music (in my bedroom) all run through one network.
i just purchased a printer which i plugged into my airport express to enable wireless sharing, and in airport utility it shows the express is connected to the printer, but while im connected to the extreme it wont let me print to it, however it'll still let me stream music to it. And to make is very frustrating because the networks are joined, it wont even let me connect to just the express to do the occasional printing that i want.
I want to buy an Airport Express to connect to my university's wired network so I can have a wireless connection, use my speakers wirelessly, and print wirelessly. However, as far as I can tell, there is no way to password-protect the printer sharing feature, meaning that my printer would be free to take print jobs from anyone on my building's network. Can anyone confirm this or set me straight?
View 8 Replies View RelatedThis is my first Mac and I haven't purchased the Superdrive yet. I've been searching Google and found a lot of "hits" on the general topic, but either it's using a different OS (slight difference in screens) or glances over the topic. Can anyone recommend a good thread or site that details how to share a CD/DVD from a Windows XP (Home Edition) box over a home network (Linksys 4 port/wireless) to a MBA (new). The MBA successfully connects to the wireless router and I can access the internet. The Desktop (Windows XP box) successfully connects via RJ45.
Secondly if the above is fairly easy, I'd love to know how I can print from the MBA through the network connection to the PC. The printer is a Xerox WorkCentre M15 (it's a office grade machine which I had presumed works well in a shared environment.) The printer is connected to the PC via a USB connection. However I've ordered a Buffalo LinkStation (I think that's the name) which is a NAS box that has print sharing capabilities, so I could hook the printer up that way if necessary to use for both the PC & Mac.
I have a macbook that is running leopard on it and it is connected to my Airport Extreme and I have a Windows XP desktop that is connected to my Airport Extreme Via ethernet and i would like to be able to look and interact with the windows XP computer through my Macbook. (Screen Sharing)
View 1 Replies View RelatedI've just set up an old PPC mac mini as a basic server in my home (Basically at the moment it's just a printer server). I, however, also have a scanner that I would like to make network accessible.
Now, I know it's possible to share a scanner over a network with image capture on OS X, but how can I make this scanner accessible in Windows? Does anyone know any software that I can install for this?
they share the same wireless connection.
Can I share files between them?
I've figured out the way to share between two macs by enabling "file sharing" to "everyone" connected to the same network. Suppose there're three macs in the network, A,B,C. Is it possible, however, just to share files in A with B and leave C unaccessible to A and B? To put this in short, may I share files to a specific user on the network instead of everyone?
View 3 Replies View RelatedSoon as I upgrade to the latest version of OS X Lion, my Win 7 Pro machine can't see my Mac to map a drive.It worked perfectly when the mac was on snow leopard.I read somewhere that Apple removed/shutdown smb in the Lion operating system and that is what's causing this issue.
Info:
iMac, Mac OS X (10.7.4)
I am attempting to connect my Dell AIO Photo 926 printer to my wireless network (WPA2). I use an old Apple AirPort Extreme (hereinafter "AAE") as my router (it's the old "dome shaped" one). I believe that heoretically I could plug the printer into the USB port on the back of the AAE and any computer connected to that network can print to the Dell printer. I have installed the drivers for the Dell AIO Printer and it prints fine when connected to my laptop (Windows 7). However, I am having NO luck doing this when I go to Control Panel and run the "add a printer wizard." Is there anyone who might be able to point me in the right direction to a tutorial or something? Is what I'm trying to do even possible with an AAE and an "older" Dell printer?
View 6 Replies View Related