i just had a Kernal Panic. i think i had a crash abou 2 weeks ago to heres the log that came up on restart..
Interval Since Last Panic Report: 2821954 sec
Panics Since Last Report: 1
Anonymous UUID: 0E9B2801-C98E-4E37-9CD4-85E8901F28D0
Over the last week I've had 2 of what I have now discovered are called "kernal panics". I've had this SR 2.2 for about a year and a half. I had one prior to installing SL last week 1 this week after installing SL. Other than the "You must restart your computer" message following the crash I've not noticed any other problems. I have not installed any RAM or other hardware. I've pasted the kernal panic report with the hope that someone might be able to help decipher what it means and what the issue might be.
Interval Since Last Panic Report: 62630 sec
Panics Since Last Report: 1
Anonymous UUID: 996DB563-C714-44DE-802E-38045326CE4D
Thu Sep 3 20:51:08 2009.................
My beloved ibook G4 �went on strike ; ) !!!� As soon as I turn it on a message appears that tells me the
following:
You need to restart your computer. Hold down the Power button for several seconds or press the Restart button.
I've written recently about my kernal panics on my imac g5 I reinstalled the original software and moved on to Tiger and it says "cannot install this on this computer" I have installed it before, it is my software bought free and clear. I don't know what to do. My son's college papers are due and we cannot get on the sites because our flash/etc. is not updated. I am now at 10.3.9 (I go to "about this mac", more info, and my system overview app will bounce on my tool bar and not come up.) I dont know what's going on. My hardware tests all came out clean.
View 2 Replies View RelatedI get this error when i try to start the macbook. It tells me to hold down the power button and restart in like many different languages.
View 5 Replies View RelatedI always read about them but I got the first message saying I needed to restart the computer it has not happend for a few hours is this something I need to worry about?
View 3 Replies View RelatedI'm having them 2 to 3 times per day. In my limited research, I know it can be related to memory and I am in the process of pulling out pair by pair to isolate which one may be causing it, but no luck as of yet. Or is it related to something in the operating system. Below is the kernal panic report. [code]
Info:
Mac Pro, Mac OS X (10.6.8)
I just ran software update on my 1 yearold imac, it showed 4 things needing updated so i clicked download and install as usuall but when my computer restarted to install the updates it said there was an unexpected error before it finished installing and gave me an option to restart which i choose to do, but now it keeps showing Â
Panic (cpu 0 caller 0xfffffff800064ba7b): "unable to find driver for this platform" and so on....Â
Mac os version:
Not yet set Says i need to restart my computer. Hold down the power button until it goes off, then press the power button again.Â
Already tried that nothing happens just boots up n shows the same thing.
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.4)
I am having serious issues with my Apple PowerPC G5.. Its the 2.5 Dual Processor version of early 2005 running os x 10.5.8, i have installed; 2x500gb hds along with 4.5gb of ram... Ok now heres the problem, yesterday i came across an app called "CHUD" this apparantly was developed to help speed up an OS X system, so i downlaoded and began to install the parts to the app suite, after installing 1 or 2 of the CHUD apps i came to Reggie SE, i doubled clicked on the install then my G5 decided to freeze, completley! I tried Force Quit and nothing happended, the system would not respond what so ever, so i left it for 30mins or so to see if it would figure itself out and it didnt so i had no alternative but to cut the power and reboot....
Now, after reboot, my G5 will boot up to the User login dialogue, once i enter my password the dialogue accepts my password and dissapears (astho it is logging into my account) but then the screen turns Blue and the system returns to the Username & Password dialogue box..... Also the fans within my system begin to speed up and dont stop for a while, almost sounds like my G5 Tower is about to take off!
I am pretty sure I have just maxed out the space for start up. I can't get past the message box that pops up and says you need to shut down your computer in 4 languages. I so hope this isn't the logic board.
I tried restarting and holding down command option p r and command option n o and unplugging the power cord from the back and plugging it in as I press the start up button. then release the start up button and press again. I cant get past to free up the space or use disk utility. Do I start it from the start up disk holding down the c key and do a reinstall?
I often watch things on my MBP from the internet, I had been using greasemonkey and thought that it was the script causing this panic, but just today it happened and greasemonkey was not enabled. what does this kernal mean>?
Interval Since Last Panic Report: 379651 sec
Panics Since Last Report: 1
Anonymous UUID: EE4744EC-7577-4E8C-B478-CA16419E0A85...............
I have recently bought an iBook G3 indigo clamshell off ebay.It came with os 9 and os x Tiger , but alot of the time when i start up tiger it goes into kernal panic and i have to restart where it panics again :/ what could it be? and how could i fix it?
View 1 Replies View Related'08 Mac pro kernal panics every time i turn on my firewire recording interface, an echo audiofire 12. the strange thing is, it runs fine if i turn the interface on before booting the computer.
View 1 Replies View RelatedI have a macbook intel core duo and it shut down in the middle of watching a youtube video. It will not startup freezes at grey screen with apple logo (no spinning disc). There are no abnormal sounds or extreme temperatures. The macbook is just over one year old.I have tried the following:Ran disk warrior 4 in target disc mode - no problems found
View 10 Replies View Relatedi was doing research and this was apparently a very common issue in the final run of G4 ibook 1.33 ghz.Like i said, i searched and found threads relating to this, but i had issues finding whether or not there was ever a conclusion:My girlfriend has an effected ibook, which we wrote off 2 years ago as a bad logic board and it has just been sitting around collecting dust. A friend mentioned the logic board/airport card issue, so I am wondering, is there a fix?
View 1 Replies View RelatedI bought the Late 2008 MBP and the USB ports are not registering as 2.0. I have confirmed that it is indeed running at 1.0 speeds through synching my ipod touch through itunes as well as through transferring files from an external hard drive. The transfer speed averages around 1-1.5 mb/sec, which is in line with USB 1.0 speeds.
I've lived with it for a few weeks, but I just got a new ipod nano today and whenever I connect it to my MBP, the screen turns gray and I immediately get this message:
"You need to restart your computer. Hold down the power button for several seconds or press the restart button."
I've tried resetting the SMC but to no avail. It hasn't escaped from my attention the possibility that the two problems are interrelated. I haven't been able to find OS X drivers for the USB ports, so right now the only option that I know of is to reinstall leopard. Does anyone know of a simpler solution that wouldn't require a complete reinstall of the OS?
my macbook pros been bringing up a restart screen when i turn it on for the past week. Im running snow leopard. when it does turn on after a few tries, it ends up having a flashing screen after 10-15 minutes and freezes. and my mouse will be super sensitive, but i cant click anything? ive never had a problem until this. I've ran the little hardware check you can pull up from boot and nothing came up.
heres my error message:
Interval Since Last Panic Report: 80218 sec
Panics Since Last Report: 5
Anonymous UUID: 6D856B5C-896F-4ED2-9AB3-3B18ACDB358A...............................
I have a 15" mbp with 10.6 Intel core duo, 4gb ram with a boot camp and ubuntu partition through parallels. The other day I was installing xcode from apple's website, which failed 3 times after downloading saying the package couldn't be expanded. I left my computer for a while and came back where i then had to log in again. it rejected my password numerous time (i'm positive it was correct). when i restarted my computer i got a kernal panic screen when the apple logo came up. it told me to restart the computer which i did. didn't work. i restarted with the osx cd to use the disk utility. when it checked the drive it found a bunch of errors, which i then tried to correct. it went for a couple minutes then told me they couldn't be fixed and i should try to back up my data and reinstall osx. i don't know how to back up my hard drive when i can't log into my account. i've tried to boot in target disk mode and copy some files that way, but the only disk the other computer sees is my windows partition- no mac partition.
i've also tried these, none of these have worked: restarting in safe mode resetting the ram and pram booting with different sticks of ram all result in a kernal panic.
my windows partition still works fine though (as much as i hate to say it) the only things I really care about on my computer are my files from school and my itunes library. is there any way i can get these files off my computer?
I just replaced the HD in an iBook G3 I have laying around with a toshiba 40gb. The install went fine and I formatted it in disk utility using mac os x extended (journaled). I ran it for errors and it checked out fine. I also ran the apple hardware test CD and everything checked out there too. The problem is I am getting a kernal panic no matter what I do. I started off installing 10.3 and the first disc installs fine, but then when it restarts it gets an instant kernal panic. I tried 10.4 with the same results. Then I tried the 10.2 discs that the iBook came with and it would get the very last step of the install on the 1st disc and would not go any farther. It said "one minute remaining" for over an hour.
I have taken a picture of the error log that shows up and you can see here: The top line got cut off but it says "panic(cpu 0): Unable to find driver for this platform: "PowerBook4,3" Like I said, everything checks out hardware wise and i have tried three different versions of OS X.
Happy for my macbook pro for almost two years. Lately it's been unstable and freezes sometimes. Two days ago it went to kernal panic and shows kernal panic screen and asks for restart everytime it restarts. It won't start on DVD or safe mode (it just hangs there and keeps spinning). For single user mode, it first worked and I was able to remove login items, but it froze again and now generates the following panic log. All the hardware have been the same and I have installed vpn a few months ago and dropbox last week.
Jettinsoning kernel linker.
Resetting IOCatalogue.
GFX0: family specific matching fails
Matching service count =1
Matching service count =2
Matching service count =2
Matching service count =2
Matching service count =2
Matching service count =2
May 3 11:51:15 localhost DirectoryService[20]: Launched version 5.6 (v514.24)
Previous shutdown Cause: 3
ath_attach: devid 0x24
yukon: Eithernet address xxxxxxx
Override HT40 Powers. EEPROM Version is 14.4. Device Type 5
NVDANV50HAL loaded and registered.
GFX0: family specific matching fails
GFX0: family specific matching fails
GFX0: family specific matching fails
Matching service count = 0
May 3 11:51:24 localhost configd[28]: Error: No interface name for AirPort_Athr5424ab
May 3 11:51:24 localhost configd[28]: Error: ioPublishedDriverCallback() failed to initDeviceFromService()
May 3 11:51:24 localhost mDNSResponder mDNSResponder-176.3 (Sep 30 2008 16:59:38)[48]: starting
AirPort_Athr5424ab: Ethernet address xxxxx
AirPort: Link down on en1
May 3 11:51:32 xxxcomputer fseventsd[72]: event logs in /.fseventsd out of sync with volume. destroying old logs. (13 218 724)
AirPort: Link up on en1
AppleYukon2: 000000.00000 sk98osx_dnet - recovering from missed interrupt
May 3 11:51:32 xxxcomputer fseventsd[72]: log dir: /.fseventsd getting new uuid: xxxxx
May 3 11:51:32 xxxcomputer ntpdate[88]: can't find host time.apple.com
May 3 11:51:32 xxxcomputer ntpdate[88]: no servers can be used, exiting
AppleYukon2: 0000,0000 sk98osx_dnet - recovering from missed interrupt
May 3 11:51:41 xxxcomputer /usr/sbin/ocspd[97]: starting
May 3 11:51:32 xxxcomputer /system/library/coreservers/loginwindow.app/contents/macos/loginwindow[68]: login window application started - threaded auth
ciscoVPN: attempting to attach to all available ethernet interfaces.
ciscoVPN: checking if we are already attached to interface: en1
ciscoVPN: no, not yet attached to interface: en1
ciscoVPN: interface: en1, filter attached.
ciscoVPN: current MTU for en1 is 1500, saving it.
panic(cpu 0 caller 0x001A9C68): Kernel trap at 0x0019ca06, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x01b51000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000000, ECX: 0x0549c004, EDX: 0x00000000
CR2: 0x00000000, EBP: 0x36077b58, ESI: 0x00000000, EDI: 0x36077c3c
EFL: 0x00010246, EIP: 0x0019ca06, CS: 0x00000000, DS: 0x00000010
Error code: 0x00000000
Debugger called: <panic>
Backtrace (CPU 0), Frame: return address (4 potential args on stack)
I was updating my mothers ibook G4 and after the two restarts it gives me this. Is there any way to get past this she does not have a back up of her HD.
View 6 Replies View RelatedI got a message to update some software, so I pushed the right keys to download. A few minutes later I got an error key and the screen went gray. I shut it down. Then I got a message that says, "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again." I've done this countless times. The message in the left corner says panic, which I am doing.
It says, "Unable to find driver for this platform: /"ACPI/" Slashes go the other way,but can't find any on this laptop.
Info:
iMac, iOS 5.1.1, use lion
I think it's UNIX. Not too familiar with it. I have G4 powerbook. 4 years old. Tiger. I was surfing safari, when I got the wheel. Couldn't even click the desktop to activate the finder. Did a hard reboot. Now, the mac Icon comes up, then goes to a black screen, then to the MAC OSX start up window (bar doesn't move). Then a black screen with Darwin/BSD (new-host.home) (console) login: It just comes up with a line that ends with my user name and restarted then same thing happens.
View 1 Replies View RelatedI just got a refurbished iMac G5 from the university. When I got home I installed all of my applications. I then update them. Like usual, I have to restart the computer when they are done installing to complete the process, so I do. However, when I boot up the computer again I get a Kernal Panic. ("You need to restart your computer. Hold down the power button for several seconds or press the Restart button.")
View 4 Replies View RelatedI have a MBP, it had a flickering screen (graphics card), so I got it fixed under warranty, then about a month after the fix, the MBP refused to wake - I took it back again and it was fixed.
Now the MBP is experiencing repeated kernel panics - especially after the any system update - there were a few recently.
The only solution seems to be switching the machine off and letting it cool.
I turned up one day to teach using the Mac Pro and the message on the screen said I had to restart my computer. After many times I gave up. I wrongly thought the hard disk failed as one of the pupils saw some water underneath the Mac from the leaking roof. I checked and formatted the hard drive inside a pc and put Windows on it. After inserting the hard drive and the OSX into the dvd drive proceeded to re-install the software, only to find exactly the same problem as before. What to check next before trying to find someone to fix it.
View 4 Replies View RelatedOut of the blue I keep getting a kernel panic (You must restart computer) while using my G4. All I use it for is word processing and internet browsing. Seems to happen when switching between windows.Here is my most recent crash log reports:Â
Mon Mar 26 21:27:00 2012Â Â
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000002B154200 PC=0x00000000000ACD04
Latest crash info for cpu 0:
Exception state (sv=0x2708C280)
[code].....
Info:
g4 desktop, Mac OS X (10.4.8)
My imac has started to have a kernel panic all the time lately. It is where the whole screen will go darker and then a box in all different languages comes up saying I need to restart the computer. I have a couple of questions in relation to this, first if I reinstall and then back up from timemachine will I have the same issue again? If I do a fresh install and reimport all my music and vids manually will that be a better way to do things?
View 3 Replies View RelatedDownloaded last updates, iTunes and other apps and now my MBP is not booting. Not with the c key held, nor the s key, nor the control option command keys.
View 1 Replies View RelatedMac G5 ppc OSX10.4.11
Starting up from any boot disk will give me a kernel panic forcing me to hard restart.
Background:
After many freezes I ran disk utility and I get:
Checking Catalog file.
Invalid index key
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
So I use my wife's Imac startup disk to boot it in order to repair but I get the dreadfull death screen (I know how to press the C) I'm thinking maybe it's because her disk if for her Intel proc so I go and buy a copy of disk warrior 4, and same problem.
