OS X :: 2wire Modem Cannot Detect Computer For DMZ / Port Forwarding
Feb 17, 2010
i have a 2wire modem that currently will not recognise my computers anymore. it wont even recognise my airport. i would like to give my virtual osx server DMZ/port foward access so that i can map/vnc/ftp externally (i cant port forward either). for this type of modem, you need to select the computer first then change the port forwarding settings for each computer, but as i cannot see the computer in the first place i am unable to port forward at all. does anybody have any advice for me to reset/renew the modem to search for the machines again? (i have reset the modem numerous times).
View 7 Replies
ADVERTISEMENT
Feb 22, 2010
I am enjoying the magic of watching the hours get sucked into the networking hole. Maybe someone can save me. I have a 2wire 2701-HGB modem on ATT. I have it as my router and modem over wifi and wired. I just bought the Time Capsule, and my plan is to have the TC be my router; as well as extend my network since there is crappy coverage in my house. I can get the TC to join a network; but when trying to create a network, things get messed up. There seem to be differing reports about whether you can use the TC to bridge the 2wire network. Something about WDS and whether 2Wire supports that. I'm under the impression that so long as I turn off the router capability in my 2wire; as well as the wireless; and connect the TC to the 2wire with an ethernet -- the TC can be my wireless router. And as a noob, what I mean when I say this is that I am thinking my TC will create the network, and talk to the modem, handout the IP addresses and whatnot...the 2wire will just provide the pipe out? .......
View 10 Replies
View Related
Jul 4, 2008
i have a macbook and my gf has a mBP and we just recently go SBC/At&t DSL. but this stupid ass 2wire modem keeps randomly losing all its signal or something and takes about 5 mins to reset. I had this problem when i was at home with the same router. Does anyone know what to do?
View 8 Replies
View Related
Feb 15, 2009
I currently have Qwest DSL and have the 2wire 2700 hg modem. I have attached the picture of it. I currently have a Windows XP computer that is now a 2 1/2 year old computer (blah it was a hand me down). The Windows XP PC is currently hard-wired to the modem. I now have the 802.11n version of the AEBS. This is going to be used for my current Macbook. I have an office downstairs so I will be doing wirelessly. I want to use the 802.11n only option with my Macbook. Also another reason I want to disable the 2wire built in wireless feature and have it replaced by the AEBS is because Qwest is not doing anymore firmware upgrades for the 2wire 2700HG modem. By the way, my family sometimes visit and use 802.11g only on the devices they use. I know AEBS supports that. I just hope 2wire wireless feature can be disabled without no issues. These are the things I am wondering:
1. Has anybody run a similar setup to mine? Any things I should consider? Any pros or cons?
2. Should I turn off the 2wire modem firewall and turn on the firewall option on the Airport Extreme base station or vice versa?
3. Should I leave alone the NAT feature on the modem be left alone?
4. Does this kind of setup have to be run in "bridged" mode?
That's all the questions I have for now. I hope someone can help with this. I looked and looked for a similar question to these questions but could not find a recent forum post to mine.
View 2 Replies
View Related
Nov 22, 2009
I am having issues with my Dual Band 1TB time capsule for some reason the damn ports won't forward I have enabled the correct settings with the ip address and the ports, but when I use a program to test if the ports are open they are always closed, regardless on pc or mac. Does anyone have a solution to this? I even reset my Time capsule to see if it would work, but no luck.
View 1 Replies
View Related
May 11, 2009
ok, so i have a bt homehub, and i want to download things on transmission, but recently it has slowed to a crawling pace, despite having many seeders.
So, i heard that to speed it up you can forward ports, and whereas i am a good gamer, i have no practical skills with computers besides a few mainly showy bits of knowledge.
View 5 Replies
View Related
Jan 5, 2010
I want to port forward for Azureus so I can get some faster download speeds. I'm kind of new to this and I want to know if thats actually going to help me get faster speeds (or if only the number of seeders matters), and if it might screw up my internet connection in some unforseen way. I'd also like to know if anyone knows of any good sites that will run you through the process for macs, I went to [URL] but it was all for PCs. I have OS X 10.6 and Aiport Extreme
View 4 Replies
View Related
Apr 18, 2010
I've been trying to use DynDNS with my Belkin router to forward ports for VNC and FTP, and I've gotten as far as having one port probe website show ports 21 and 5900 as "open." I can also connect to the DynDNS address and configure my router, which I guess is expected. For port forwarding, I've told ports 5900-5900 from outside to go to ports 5900-5900 on my computer, whose local IP is static at 192.168.2.4. Same for port 21.
However, typing in vnc://<my host> or ftp://<my host> doesn't work. If I try to use cyberduck, it says "connection refused," as opposed to connection failed if the address doesn't exist, so I know there's something up, but I don't know why it's not working. And I don't think it's the way the VNC or FTP servers themselves are set up; that's pretty simple.
View 9 Replies
View Related
Jun 23, 2012
Is it possible to set up port forwarding directly on an iMac? This is for video streaming from a house camera, over the net.
I have a simple cable modem, and no router or gateway. I would rather avoid buying a router, or airport exteme, if I could.
View 3 Replies
View Related
Jan 19, 2010
I searched MRoogle and Google so I apologize if this question has already been posted. If it has can someone please redirect me to the answer?
Situation: From school (obviously an external network) i'd like to be able to use ard 3.3.2 to manage both my imac and my server, currently i have my port mapping set to forward to my imac for ard.
Problem: I'd like to be able to manage them both (through ard, for many reasons): i have not seen any possible way to change the ports that ard listens on my server (running 10.5 server). It's obvious you can pick the ports when you add the computer but not the ports that it listens on.
Possible solutions:?? I understand ssh tunneling allows you to connect to another computer but do not completely understand how this works... would this allow me to tell the router one port and the computer another?
View 24 Replies
View Related
Apr 25, 2010
I am using mocha VNC on my ipad and iphone to remote manage back to my macs at home. I set up port 5900 to forward to my iMac (10.0.1.5) and it is working fine. I also wanted to be able to remote manage my mac mini (10.0.1.8) as well but I have been unable to connect to it. I have tried forwarding 5901 and various other ports to it but have been unable to connect via VNC. I have all of the remote management settings identical to those on my iMac. I am not sure if this is an issue that remote management in OS X only listens to port 5900? Do I need to change a setting on the mac Mini so that it listens to 5901?
View 3 Replies
View Related
Sep 7, 2010
I have fibernet (fiber optic internet) I connect directly into the wall, no router. I have my airport extreme hooked up to the internet for wireless connections and my desktop connected into the back of the (router) airport extreme.I need to open ports
View 1 Replies
View Related
Mar 10, 2008
I'm trying to open up a port for shakespeer. I chose port 1402 and I put 1402 in public udp, public tcp, private udp and private TCP. Prviate ip address is 10.0.1.200
Nat port mapping is checked. everything else is left default. The port still won't open up! What am I missing?
View 4 Replies
View Related
Mar 17, 2009
I am using my TC as the main router on my network, this means that my DSL modem is connected to it, as are my Macs and my NAS.
I have setup port forwarding, to allow for HTTPS access to my NAS, and it is working, so I can access my shares from out-and-about.
Now I would like to add a level of security, and I remember that on my old Netgear router I could specify which computers the ports were open to, using their MAC addresses.
View 1 Replies
View Related
Apr 8, 2009
From what I understand, remotely accessing your computer is actually not that hard with osx - AWESOME.. but i am finding that it seems like its "too easy to be true? From what i read, all you have to do is go into your system preferences on the server computer and enable sharing and then download "Chicken of the VNC" app (or something like it) and you can access your computer at home?! What about a static IP. Is a static IP required? Or is there a different path to take directly to your computer?
Also, when you are accessing your computer remotely, can you actually use sme of the more complex programs? For instance, i have an iMac at home with Adobe CS4 on it and lots of big photography files on it. Can you actually open and edit those files on your home computer from a different one?
View 24 Replies
View Related
Jun 9, 2009
I have read alot about what port forwarding is. I just need help with getting faster downloads on transmission because most of the time even with like 174 seeders it takes days.
View 1 Replies
View Related
Feb 13, 2010
I use Transmission for downloading torrents and it's been going really slowly lately and I can't figure out why. When I check on Transmission it says that it's using port 51413, as per the picture below. So I go into my BT Homehub set up page and set up an application sharing option for Transmission like so: I have this forwarded to the MAC address of my Airport card. Am I doing something wrong here? Right now I'm downloading something and I'm apparently using 15 of 23 peers and it's going at 3.0 KB/s....
View 2 Replies
View Related
Sep 2, 2014
I have used ssh port forwarding in the past,I have recently upgraded to Mavericks, but it does appear that my ssh port forwarding stopped some time before this. The last time I know it worked was 5/14/14, and feel it has worked more recently as well.
from my Mac I ssh to my work jump server (port 22, let's say its IP is 11.22.33.44), and my jump server has access to work PC (lets say IP of 10.1.2.3). My work PC has RDP running on it on the common port 3389. I have verified that I can set up a working RDP session at work from another box. Also, I know that my jump server can get to my PC at work as I can ping my work IP if I just ssh straight to my jump server. And I know that there is no firewall stopping me from the jump server as I can also open a telnet session to my work PC on port 3389, without errors.
how I have done it in the past and it has worked, but now recently stopped working in Terminal app:
ssh -f me@11.22.33.44 -L 3388:10.1.2.3:3389 -Nnv
The verbose logging shows that it sets up connectivity. If I then look to see if my local port is listening I can type:
netstat -an | grep 127.0
I will note that port 3387 is in fact LISTENing and waiting for connection
I then start my RDP client app, and start a session to "localhost:3387" (I could also use "127.0.0.1:3387", and have, but it does not work either). My RDP client eventually times out. I have turned my firewall off and on, neither way works.
The verbose log shows the following is setup appropriately (with noted modifications to server names and actual IPs): debug1: Authentication succeeded (keyboard-interactive).Authenticated to somewhere.net ([11.22.33.44]:22).debug1: Local connections to localhost:3387 forwarded to remote address 10.1.2.3:3389debug1: Local forwarding listening on 127.0.0.1 port 3387.
View 5 Replies
View Related
Mar 20, 2009
I recently got the new airport extreme base station and am having some trouble with port forwarding for uTorrent. I am using a MBP. So far I have done the following:1) Assigned a static IP of 10.0.1.5 for my machine2) Within uTorrent | Preferences | Network, I assigned a port of 52003 for the "Incoming TCP Port" Sectio
View 6 Replies
View Related
Apr 3, 2009
Having issues with portforwarding on my new macbook aluminium using the airport extreme as my wireless router. Using the airport utility i scroll over to the port forwarding tab in my airport extreme. I dont know how im doing this wrong..i allow the ports that amule uses (port 4662 (TCP) and a few others for the kad network). Is it as simple as typing in 4662 in the public TCP and private TCP? I still obtain a low id and the online test provided by amule for the port 4662 doesnt succeed. Any help would be great.
View 2 Replies
View Related
Jul 11, 2010
I have a Linksys and just switched to using an Airport Express for the wireless network. In order to use Desktop Connection (VNC) on my iPad I need to open the ports 5900 (Mac Pro) and 3389 (PC). In 1st pic is my Linksys setup that did this. In the 2nd, is this where I enter the ports (under Host or Tunnel) and what syntax for Address and Length? Or if this is the wrong place how do I do it?
View 9 Replies
View Related
Oct 28, 2005
I understand what it is used for and how it works (for the most part) but it is actually a router? Can I get into it's settings with a browser to set up port forwarding and static IP's, etc.? I am looking to replace my Dell TrueMobile wireless router and I want to make sure that I have the right idea about the AirPort Express before I buy.
View 24 Replies
View Related
Apr 11, 2009
Does anyone else have some Safari crashing issues? It usually happens when there is flash videos loading.Sometimes a video will try to load, and the browser closes. Not all the time, even on the same video. Not too sure what causes this, or how to fix it. I notice it will also do it sometimes when there are no videos, I could be on a forum such as this one. I was editing a port forwarding blog on myspace last night and when I was nearly done, I opened photobucket to get the links to some screen shots, and it crashed on me. Kind of a piss off, especially since it wasn't youtube or anything that usually causes it. I ended up re-doing it in an offline HTML file first before posting to avoid losing the data again.
View 2 Replies
View Related
Feb 18, 2010
I need up figure out how to set up forwarding for a few programs I use, however, the Mac I'm using at the moment will be replaced soon with a new one. So I'd like to know if port forwarding settings are saved on the Airport Extreme or the Mac connected to it. If it's saved on the Mac, then I would just wait till I get my replacement to set up port forwarding.
View 6 Replies
View Related
Dec 14, 2008
I am having a strange problem with my computer none of the USB ports detect anything when i plug something in when its turned on but if it was plugged in before the computer was turned on it detects them fine.
View 3 Replies
View Related
Aug 31, 2014
My new macpro ( 2014) can't detect SD card reader with all 4 USB port ! I try to test with macbook Pro it's work properly ! What wrong with my USB port ?
View 4 Replies
View Related
Sep 8, 2014
I bought a MBA 13" last month and now I'm trying to connect an external monitor through a Mini Display Port-to-HDMI adapter and most of the times the display shows a message "No signal detected"...
I've tried all the possible combinations between the MAC and the Monitor but it would seem a random matter.
Info:
MacBook Air (13-inch Mid 2012), Mavericks 10.9.4
View 2 Replies
View Related
Oct 31, 2010
Working on troubleshooting my uVerse to iMac internet connection. I want to hard code my MTU setting to 1472 but not sure if I should do it on the iMac? 2wire 3800 VDSL modem? Or both? I am assuming that if I change it on the iMac to (MTU 1472) that even if my 2Wire is set to MTU 1500 the iMac should take priority. My set-up: Internet(AT&T Uverse)=>2Wire (3800HGV VDSL)=Ethernet Cable=>iMac 27" i7
View 9 Replies
View Related
Mar 15, 2008
Does anyone out there is able to guide me thru the step on setting up a 2Wire all-in-one router with the AirPort Extreme base station? I was reading from somewhere, they were saying like i need to bridge the 2 router together or something.
View 2 Replies
View Related
Feb 10, 2007
Is there any sort of "bridge" software that allows a terminal emulation program, say, Z-Term, to use Skype as a modem? It seems silly to pay for connections to BBS's when I've got SkypeOut, but I haven't been able to find a way to do this.
View 6 Replies
View Related
