I have a unibody 15" macbook pro. I currently have an incase soft sleeve but I would also like to get a speck hard case.
Will the computer, covered by the speck hard case, still fit into the incase sleeve? Has anyone done this?
Tried to go to the apple store to check but they wouldn't let me try out the speck hard case and seeing if it fit before I bought it...
where I can find a black or clear/white one for a 13" Macbook Pro?I've looked everywhere online with no luck? This seems to be the one to get over the Satin See Thru Speck. Also does the incase fit over a Macbook that has an Invisible Skin or some other type of film like protector? My Macbook 13" from late '08 was put in a Speck See Thru case on day 1 and after awhile it left small dimple dents in the bottom case. I'd like to get my new machine covered in a shield and then add the Incase. It may be too thick, but I'd like to know if someone tried it. You never can have enough protection!!
View 2 Replies View RelatedWhile part of me is really hesitant (it feels a little OCD, kind of like the people who put plastic on their couches), my recent experience with the applecare people made me realize that if I had even dropped the macbook slightly, the warranty would be void! So I'm going to use an incase hard case not for cosmetic protection for me, but for financial protection of my warranty.
View 24 Replies View RelatedI'm shopping around for a case for my 13" MBP and I needed a few opinions.
Which one do you prefer, the Incase Hardshell or the Speck See-Thru Satin?
Anyone have one for the latest MacBook Pro's? I would be using it conjunction with your standard sleeve just for some more protection since I will be using it India/Asia whilst I travel.
View 4 Replies View RelatedWhich one is better ? Incase or Speck ?
View 6 Replies View RelatedI was wanting to know how hard it is to change top and bottom case and keyboard area? I would like to know that if anything was to happen to my soon to have macbook I could change it. Also this on the older macbooks. And if I have Apple to change it how much would it cost? And yes I know that they should replace keyboard case area for free because of the defunct cracking issue.
View 3 Replies View RelatedWhere i can replace the aluminum case, is it possible?, i search for spares and didn't find any.
View 2 Replies View RelatedI have an early-2012 13" i7 Macbook Pro running Lion 10.7.3. In the past couple of days, I have noticed that the computer stalls on the grey Apple screen with the spinning wheel after a soft shut down/reboot. If I do a hard restart while it has stalled like this, it then proceeds to boot up normally.
Info:
MacBook Pro, Mac OS X (10.7.3)
As you can probably guess, it happens while playing a game (Starcraft 2). It's only happened when playing on a soft surface (in bed, on a pillow, etc.). The simple answer would be to simply not use it on these surfaces, but it seems illogical that you WOULDN'T be able to use a laptop. . . . on your lap.
View 11 Replies View RelatedI've had my Macbook since 2009, and since this morning it's been making a chirping noise, possibly from the optical disk drive, roughly 4 times per second. It stops for about a second every 10 minutes, but other than that it has been repetitively chirping all day. I haven't dropped it or anything like that.
Info:
Mac OS X (10.6.8)
I just bought the new 13" MacBook Air. And haven't found any hardshell or soft cases for my laptop.
View 2 Replies View RelatedI saw a article/rumor about some company that is making a rubberized soft shell covers for our MBP. I having a hard time finding this and I keep running into those Speck hard cases...
View 4 Replies View RelatedSomething reasonably priced, so i can take it safely out in the car with me! Also will be looking for a car charger for it!Decided against getting an iPad coz of the limitations so im gonna get a dongle, looked around & I like the look of TMobile deal of ?40 for 90 days.
View 1 Replies View Relatedany word on when these are coming out, on incases website it says coming soon. i wonder how well they corrected the previous flaws of the case and improved it
View 1 Replies View RelatedI picked one up today for my 13in Macbook Pro and I'm a little angry that it isn't really big enough to fit the laptop and the charger at the same time without having a huge bulge poking out of one side of it. Most of the reviews online said it should be big enough but who really wants that? And beyond that point I don't really want the plug putting huge pressure on the macbook when they're both stuffed in there. Anyone owners of this I'm just curious to know how you handle this problem?
View 3 Replies View RelatedTitle pretty much says it all. Will this case fit the new macbook:http://goincase.com/products/detail/...sleeve-cl57148Or does anyone know anything similar for the macbook?
View 9 Replies View Related this topic has come up in discussion a few times. I know that that I was looking feedback originally but all the research lead me to believe that it was a 50/50 between the two. My girlfriend and I both have the 13" MBP. She has the Incase Hardshell (the one for the previous generation) and I recently picked up the Speck Satin 13" for MBP because of the recent discount.
At first glance, they seem the same. But after further inspection, they do differ and although it may be subjective, this is just what I see.
INSIDE OF THE CASE
When I first received the case for my Speck, I opened the package up excitedly. It was nice to find a small piece of cloth in the package to wipe down the case and the laptop. However, I found small surface scratches on the inside of the case. The sides of the plastic are sharp as hell! Not sure if it's suppose to be like this. There was even excess plastic sticking out. The Incase did not have a cloth, but everything was clean and all the plastic was scratch free smooth.
BOTTOM VENTILATION
Nice lined pattern but only 1/4 of the grille is actually open for heat to escape. This opened area is located on the top left corner. Given this is where I find the majority of the heat to be, I would much prefer if the whole thing was open. They have the grille design in there already, why not just open it up? The Incase's vents consist of small holes that span the majority of the bottom. My personal feel is that more ventilation, the better.
BATTERY INDICATOR
The button to check battery power on the Speck is a little off. I can't tell if I hit it or not. The Incase actually has some feedback, I know that I have pressed it. Now I am not sure if it's the colour choice, but I can't see the battery indicator lights. This could be the fact that I have a deeper darker colour. I have the red and my girlfriend has green. I can see her's clearly in any light but I can barely see mine even indoors in low light.
OPTICAL DRIVE
Now the Incase was nice in that the whole right side of the case is covered except for the slot where the cd/dvd is suppose to enter. The Kensington lock is covered but the Incase is meant for the UMB. The Seck case seems like they took the easy way out. Rather than cutting out a slot for the optical drive, they just took a whole chunk out. Not a big deal when it comes to functionality, but it's just nice.
FEET
Speck has plastic feet, Incase has rubber feet. When I placed both laptops side by side on a table. The Speck moves so easily as there isn't enough friction. The Incase does move as well but you need give it a little more force.
SLEEPING LIGHT
Not sure why but the Incase's cut out for the IR is larger than required. I can only assume they did it to not impeded the sleep light to shine through. My Speck is cut out only where the IR port is, the sleep light is covered but is bright enough to shine through the case.
CONCLUSION
I think the Incase is better built, and is the perfect balance between form and function. I am actually thinking about returning this and getting the Incase when they release theirs, but I hear they take forever to release redesigns. On another note though....I think that the Speck case was sharp at the sides and had excess plastic because they used their old 13" UMB stock and put it back into a machine to make the cut outs larger to accommodate the ports. Cannot confirm this and I am bad at articulating it but what I am trying to say is that I don't think they went back to the drawing board for this. They essentially said, we need to make the cut outs larger and rahter than making a new die/mold, they make alterations on their old cases, if so...that is not cool.
For the Macbook. (Not aluminum)
They both don't have blue.
I have about 50 *.mp3's on my hard drive that have the file names in all upper case. When looking at them in itunes it drives me nuts....Is there a way to convert the uppercase file name to lowercase? I have googled but can't find anything. I do not want to do it manually, that would take a long time =( thanks, I'm crossing my fingers
View 11 Replies View RelatedI bought a new MBP last week.It is still sitting in its box.I am on my old ibook g4 with half a broken screen as I don't want to scratch my new MBP.I am a poor collage student that wants to take good care of my big purchase.It was the laptop or a used car and I went with the laptop as my g4 got hurt.Biggest purchase I have made EVER.My g4 was fine and very well cared for but I have diabetes and passed out and fell on the ibook
I was very jazzed about buying a hardshell to protect my computer.Then seen [URL] had some nasty reviews about both the incase & speck.So I thought crap what should I do.
Incase I have read that computer only stays at one angle?That it dose not close all the way or makes a popping sound when it rubs the back.I am sure some could be due to not installing it right.Someone even said they could not get off and apple took it off and the top part of the computer broke
I didn't see to much on Speck but did read on this forum more people prefer incase?I figure you all know what you are talking about when it comes to what is good bad for the mac items so kinda registered to get some Ideas on what to get.
My worry with the hard shell cases is that they scratch the computer and/or let dust particles and other nasty stuff in. Perhaps this will be prevented with the use of the Invisible Shield?
View 4 Replies View RelatedI just ordered my MBP 17 inch and I want to encase it in plastic, but I can't find the Speck or Incase hard shells since they are sold out... ??Could it be that they are re-working them for the new mag-save adapters ?
View 17 Replies View RelatedI was wondering if anyone that had either of these cases could post pictures of them? I'm trying to decide which one to get get and the colors are pretty similar. I wanted to see what the actual colors look like. There are a lot of youtube videos for speck cases but not incase and I can't find any images other than the stock images (which are always off.)
View 24 Replies View RelatedDoes anyone know if the PB 15.4 Aluminum case is exchangeable with the Macbook Pro 15.4 case? I have a 1.6Ghz Powerbook which has a few dents in the front but I don't see any of these cases for sale on Ebay, but I do see Macbook Pro cases. It's really a nasty cosmetic issue I'd like to resolve and then sell it.
View 1 Replies View RelatedI am working on restoring a Time Machine backup from Leopard to a clean installation of Snow Leopard. The only problem I'm facing is that the Leopard backup is on a case-sensitive drive (and the Snow Leopard drive is set up, by default, as case-ignorant).
I have scoured the Web the last two days and have not found a definitive answer to my question: Is there a way to transfer the data from the Time Machine backup on the case-sensitive drive to the case-ignorant Snow Leopard drive?
Yesterday I ran across a tutorial explaining how this might be accomplished using SuperDuper! but a commenter explained that Disk Utility could be used and was much easier.
I tried the Disk Utility method but it didn't work, and I ran out of time to give the SuperDuper! option a try. Does anyone know if it, or even Carbon Copy Cloner, might solve my problem?
I just switched from Windows to MAC 2 days ago - a brand new Macbook Pro. Needless to say I love the design of the machine. However I am having a slight problem with the fonts in OS X. I have always loved Windows XP fonts, and to a lesser extent Vista fonts. But my first impressions of OS X fonts have been terrible - They feel blurry, and very very soft, and very unlike crisp and sharp nature of XP fonts. My question is - is there a way of adjusting the fonts in OS X to make it look more like Windows? I almost feel blind looking at the fonts right now in OS X.
View 8 Replies View Related(Une erreur est survenue dans l'App Store. Veuillez réessayer ultérieurement. (13) ERROR13 or 100)I have change my mac recently. I made from my 24 to my new 27 a restor setting, moving all my files and softs to my new mac.since this time can't do anything with App store
Info:
iMac, Mac OS X (10.7.4)
the arc soft s/w came with my canoscan 4400F scanner a few years ago. i use it just for scanning in photos and mostly slides - it has a useful preview section that i like, plus it seems to be essential to scan in slides. when i converted to 10.6.2 on my new 1999 imac, the program would open but crash on selecting a scanner. canoscan toolbox 5.0 also came with the scanner and works fine for everything except slides. can canoscan be made to work with slides. i spent some time on the arcsoft support site (very poorly designed) i guess the alternative query is -- does apple make software that will support scanning on canon scanners?
View 2 Replies View RelatedI saw a link a while back of a guy who converted an old G5 case into a server, any idea how to do this?
Or does someone know of the link to see his server, or one like it?
