Searched the forum, some useful information. Found the following : On amazon Hypershop's car charger I'd like some flexibility, so the Hypershop one is out of the question (being able to charge my android phone separately from laptop, my backup pc laptop, etc). So my question is, what inverter are you using? I found some on best buy (Cyberpower), but there's no wattage listed in their specs.
View 4 RepliesIf I wanted a portable charging solution for my 13" 2010 MBP. [URL:...] I'm not sure about the amount of power this product supplies, etc and whether or not those types of specs will be compatible with my MBP. if someone could advise as to what would be best.
View 7 Replies View RelatedI've got a MBP and will be charging two iPhones off of it most of the trip. How big of power inverter will I need? [URL:..] will this provide enough juice?
View 6 Replies View RelatedI was wondering if the airline charger or something could be used in the car? sort of like my iphone charger. Does anyone know of something out there?
View 6 Replies View RelatedDoes the Apple MagSafe Airline Adapter charge your macbook pro in the car.
Info:
MacBook
Pro, operationg sistem is lion
I recently took apart my macbook to see if I could get my wifi antenna nudged to work better. It does seem to be fixed, but when I put the laptop back together the inverter cable shorted to the frame, smelled like burning electronics and stopped working. However, I put a new inverter in and it is not fixed. I was careful to note that the second inverter did not create any smell, but the screen did not even light up for a second. The LCD IS still working, as I can see everything on the screen if I shine a light on it. Except for no backlight, the computer works fine. What could possibly be wrong, and what are my options?
View 3 Replies View Relatedhow can i get my macbook pro to charge using a inverter sometimes it will charge and sometimes it wont works fine when plugged into a ac outlet in my home
Info:
MacBook
Pro, Mac OS X (10.7.3)
i just installed my new inverter and put evertyhing back into place. tried turning it on and no reaction. There is no sign of turning on, no sounds or light to show. I thought i may have damaged the keyboard ribbon but there is no physical harm that i could see.
View 3 Replies View RelatedFound a macbook on the cheap. It boots and works via external monitor but the screen has no backlight. I've tried a couple inverters that I know to be good. When I first tried to change out the inverter it showed light for about a second then went blank. Now nothing at all. What should I look into yet?
View 2 Replies View RelatedTo begin with, I own a MBP Intel Core Duo 2.0/2 Gigs of ram. I've had this laptop for roughly 18 months and do not have Applecare. I take extreme good care of all my stuff and still baby it till this day. I have NEVER bumped the laptop against anything, accidently dropped it too hard on the desk or anything similar along the lines. Essentially, looking new. About 2 days ago, I was working with my laptop and I closed the lid which made the computer go to sleep. Everything all normal & no appearance of anything! Around mid-night, I opened the MBP's lid to check my email. (Computer awakes, I can hear the Superdrive awake) then boom, a blank screen. The monitor did not turn on then burn out, it was always off. Similar to if you dim your monitor all the way. I can still see the desktop however, there is no light. If I take my flashlight and point it to the desktop, I can see everything. I called a few places, and they described it is the Inverter board or could be the fluorescent bulb that is damaged. My reasoning for the inverter board is faulty is because when a fluorescent bulb goes out it, it tends to flicker at first. Researching this forum, I noticed most MBP users LCD's that go out, they flicker but, mine just went out and I can still see the desktop. Where can I order the inverter board? I tried [URL] but they're out of stock. I will change the inverter board myself because it will be quicker and I need to use my laptop. It is currently hooked up to an external monitor until I can get this fixed.
View 11 Replies View Relatedi was wondering if anyone would know of a place to find an inverter board for an imac g4 as the screen blew out. ive been searching around ebay with no luck really. If anyone knows of an alternative to ebay or anything
View 2 Replies View RelatedI got a cheap 1.42ghz 512mb RAM, 14" screen G4 ibook because it had a broken hinge. I tore apart the laptop and replaced the hinge (screen frame) and put it back together. The screen wouldn't work. I opened it back up and found that the video connector was lose, so I connected it and put it back together. BAM!! Everything worked... everything except the sleep feature when the lid is closed. So I opened it back up, took the magnet from the old frame and put it on the new frame (which was missing its magnet).
When I turned it back on the screen was blank/dark. It showed all the signs of classic inverter board burnout (dark screen, can be seen with flashlight from behind, can be seen on external monitor), so I ordered an inverter board and when it arrived, I swapped it out. Still nothing. The next idea would be the backlight, but that doesn't make sense... I'm trying to figure out what might have happened to make the inverter/backlight go from working fine to not working when all I did was removed the screen back case, screw on the magnet and close it up. I have done a bunch of digging around under the hood and am wondering if anyone knows of a possible ground wire, other connection, easily broken wire, or other issue that might have happened. I'm thinking that it might be one of the power wires that goes into the inverter. It might have broken inside the shield, or maybe I was sold another bad inverter board.
So:
Assumption 1: one or both inverter boards are good.
Are there any connections other than the inverter data/power cable from the mobo and the cable from the inverter to the backlight?
Does anything else (backlight, etc) have to be grounded? Where are these groundings?
Would anything else give the same symptoms except the inverter?
How can I test the backlight? I heard that there are two lights in these machines, so if it was one of the florescent lights, only 1/2 the screen would be dark.
Assumption 2: Neither board is good and that is the problem.
How can I test the inverter board (short of an osilascope) to see if it's working?
Is this a good assumption?
I'm about stumped right now and haven't found any direct help on forums. I'm hoping someone in the Mac community has run into this or has an idea about what could be going on. I'm really hoping that I missed something like replacing a screw that is also a ground or something along those lines.
I have a tough one regarding an iMac G5 ALS 17" 2Mhz I am fixing. First I want to point out that I am familiar with the innards of these ancient beasts as I have fixed a couple 1st gen iMac G5 as well as iSights and Duos.
When I plug in the cord in the PSU, the 1st diagnostic LED comes on but when trying to start the computer the second diagnostic LED comes briefly on and then goes off. Nothing else happens, no chimes, nothing. According to Apple KB this is the sign of a faulty PSU. Yet, I have tried replacing the PSU and I get the same result.
Now the weird part is that if I unhook the LCD cable the computer starts normally (it chimes) with the display off. What is most puzzling is that it will start with the inverter hooked up but the LCD display cable off but will not start with the inverter entirely taken off but with the LCD cable on. It seems that it is the LCD itself that prevent the computer from starting. I thought the inverter would draw current but not the LCD itself so it's probably something else.
Anybody had anything similar happen to them? Could it be that the inverter is faly but it only draws when the LCD is hooked? Could it be some kind of short in the LCD or something that make it draw even with the inverter unhooked?
Does Applecare cover the replacement of the backlight bulb and inverter board? Looking at a PowerBook that has Applecare - The screen in the listing picture is not too bright. The seller has stated that all is well with the screen, but you never know. I am prepared to go for it if the Applecare covers the screen lighting. Applecare cover on notebooks appears to be worldwide - If the screen lighting conks out overseas, I can get it fixed at the local Apple Store?
View 5 Replies View RelatedAnyone know where I can buy an extra AC cable for the MagSafe 85W power supply that came with my late 08 MBP? I'd like an extra cable and I'm not interested in ponying up the dough for the entire power supply. I checked the Apple Store and Macmall, but haven't found anything as of yet.
View 3 Replies View RelatedLast Thursday I down loaded software updates from apple and have been losing power very quickly ever since. It just seems like as soon as I remove the power cord I lose power with in three minutes.
Info:
MacBook, iOS 5.0.1, purchased feb 2009
I've been suffering of slow speed on my macbook pro, and this happens when I unplug it from power and just let the battery works itself, then the % CPU usage increases dramatically to 330% and the laptop becomes very very slow, what should I do? Because if my macbook is off-power, it doesn't work properly, so what is the point to own a portable computer?
Info:
MacBookPro, Mac OS X (10.7.4)
Can I use existing 85w magsafe adapter from existing macbook pro with new MBA 13 magsafe2 port ?
Info:
MacBook Air
I recently discovered my computer had died while it was sleeping. I tried charging it but am recieving the "Battery not charging, power source: power adapter" status.My power cord light is green, always. and the computer dies instantly when I remove the magsafe.
I've tried the "remove the battery, press the power button, plug in the magsafe" troubleshooting process, but it doesn't work.I've noticed that even with the battery out, the charger reads a green light.I've tried several outlets with the same results.Here are my battery stats
Battery Information:
Model Information:
Serial Number: DP-ASMB016-384e-7636
Manufacturer: DP
[code]....
Info:
MacBook, Mac OS X (10.5.8)
My girlfriend has a 12 inch Powerbook G4. She noticed that the battery life was starting to dwindle. Tonight, she tried using it. It wouldn't power up. The battery indicator showed one flickering power circle. The adaptor has the green circle on it, indicating the battery has a full charge. However, the computer won't charge up.I've read the 12 inchers don't have separate PMUs. Could that prevent the machine from starting? She was using it earlier this evening, as she e-mailed me pictures from our vacation.
View 10 Replies View RelatedI have a iBook G4 laptop and there seems to be something very wrong with it. It started a few days ago just randomly. I was reading something on the internet and the screen went black on me, but the power was still on (I clicked CAPS LOCK to see if there was power). I then proceeded to push the power button and the power went off. When I pressed the power button again to turn it on, it made that internal noise it always makes and then the fan came on, and wouldn't turn off. There was no picture on the screen at all. Completely dead. But there was power, because when I clicked on the CAPS LOCK, the light came on). I tried pressing on the power button for at least 15 seconds and even went as long as a minute, and the power didn't go off.
View 3 Replies View RelatedI had a bad power surge (USB hub that was plugged into the back of the display had the wrong power cord plugged in... very stupid mistake I know!!) take out my 23" Cinema Display. The display shows no sign of life (no power light, etc) and the brick has been tested and is OK. My local service place says that they will have to send the display back to Apple which means a minimum of $400 for repair so I'm wondering if anyone has had a similar issue that they resolved successfully? The service place suggested that Apple would replace the logic board but is there any way to test to see if this is the main issue? I have seen logic boards sold separately online but would be hesitant to buy it without know that this would fix this issue.
View 10 Replies View RelatedI made this a new topic because I think it is important enough to do so. Probably most of those that originally complained about this have moved on to the new MacPro but I am sure there are still enough G5 owners out there that still have concerns about this topic.
A clean install of Leopard eliminates the infamous power supply beeping
Its amazing, my G5 is like a new machine; no more of the annoying power supply beep; although, I learned to live with it after a while and didn't even notice it. However, the silence is now very noticeable.
Where can I obtain a new 23 Inch Cinema Display power adapter? I've searched the Apple Store but I cannot find it.
Information:
G5 Dual Core PowerPC
Mac OS X (10.5.1)
23 Inch Cinema Display
I have found that by plugging in my Apogee Duet firewire audio interface and ONLY WHEN AppleFWAudio was loaded there was a 10c CPU raise that was making my MBP (late 2008) hot!I wanted to monitor the power that was required for Duet to run and to see if the temperature rise was due to that, so:With Apogee drivers uninstalled (just to be sure its not their drivers related, which is notMBP on battery power with System Profiler opened (to monitor the mA required by the computer from System Profiler -> Power)
View 5 Replies View Relateda friend recently gave me a g5 power mac that had some issues, and the failure was described as intermittant. The machine supposedly would work properly when booted and start freezing up after time, but if turned on the next day it would work properly for some time. I assumed it was an overheating issue, but apperently there is more to the picture. I have tried booting the machine quite a few times and the display always reads no signal. The machine sounds as if it were booting normally, but there is not output. At first I assumed it was my display cable, which was a DVI-D single link, however the DVI-D dual link cable leads to the same result. Is it nessicary to have a DVI-I cable? None of the error LEDs light up on the motherboard. After doing some hunting I haven't found anyone with the same issue, but I am wondering if I should assume the graphics card is dead. What steps do I need to take to isolate a graphics card failure in a power mac g5?
View 3 Replies View RelatedI hav" a "late 2004" G5 2.0 dual processor. To upgrade graphics card, I find many require a power supply splitter. Do I have a molex 4-pin connector? I can't see the location inside the box.
Information:
G5 dual 2.0, 2.5Gb
Mac OS X (10.4.3)
I have the problem that I need to frequently power cycle (shut off and on) my dsl modem to maintain a reasonable speed with my internet connection. It is making the internet experience pretty user unfriendly. Does any one know whether there is a way to optimize my internet connection such that this is not required so frequently (couple times a day)? I am on my second dsl modem, and the same problem has occurred with each of them. ATT simply advises me that my solution is to power cycle the modem to sync the system, whatever that means.
Information:
Power Mac Dual 2.0 GHz
Mac OS X (10.5.1)
ATT DSL Internet Connection
I added 2 sticks of 512 to my power mac g5 1.6. I had ahard time getting the computer to see the new ram, but finally was able to kinda get it working after zapping the pram. However my computer only saw these 2 sticks as 256, odd. So i attempted to troubleshoot the problem. I tried just installing the new ram, but the computer wouldnt boot. I tried a few different combos with the other 4 sticks i had, but nothing. I put the old memory back in, and still nothing. The power led looks to blink once every five seconds or so. I tried pressing the pmu reset button, but still the same out come. I also tried taking out the battery, nothing.
Information:
1.6 g5 single proc
Mac OS X (10.5.1)
I had a weird issue this morning. I started computer and it did not make the chime sound, it didn't do anything at all. I disconnected it from the extension cord as well as all the peripherals attached to it and nothing. I tried a different start up disk and again there wasn't a sound. Then i unplugged it and reset the SMU on the mother board and air sprayed the computer to remove all dust. Then plugged it back and it came back on.
Information:
Power Mac G5 Dual 1.8
Mac OS X (10.4.11)
