I am upgrading my Macbook PRO to 1TB hard disk and as I understand, there are only 2 of those 2,5 inch on the market. I wanted to ask you guys to help me choose which one to pick. [URL:....]
View 3 Replies
I want to upgrade my hard drive from 320GB 5400 rpm to 320GB 7200 rpm.
Are there any models that you would recommend over the official Mac brand?
Also do you recommend that I attempt to do the installation myself, or pay someone else to do it?
i have a macbook MB881LL/A. i want to replace the hard drive. It is only 120gb. how big can i go and what type do i need?
Info:
MacBook, Mac OS X (10.6.4)
How safe is it to upgrade a 2011 MacBook Pro to a SSD? What are the advantages and disadvantages and does it harm or hurt the overall performance of a computer. All of the same questions but with upgrading my RAM
Info:
MacBook Pro, Mac OS X (10.7.4)
my mid 2009 MacBook Pro 15". I have bought new RAM and a new SSHD. I would like to take ONLY the important files from the old hard drive and basically start the new SSHD from scratch. how to install the original operating system on the new SSHD and then move the old files onto my "new" computer.
View 8 Replies View RelatedI have a 500 gig hard drive that was given to me that I'd like to put in it but I'm worried about voiding the warranty. I've looked up replacing it and it seems simple.
View 3 Replies View RelatedI am happy to say that I love my new MacBook I bought a couple weeks ago, but since I bought the white entry level for my first Mac, I have been trying to find some kind of useful info on what internal hard drives will be compatible with it. I only have the 120 GB model but I want to expand to a 500 GB or 320 if I can't get a 500 that will fit. Is there anyone out there can recommend a compatible drive? I found one at micro center (link below) but am not sure it will fit. I don't mind paying this for the drive, I just am not familiar if it will cause issues with the power, make more noise, etc. [URL]
View 5 Replies View RelatedI'm upgrading my HD on my Macbook, I read that you need a Torx T9 and I also read a place that suggested a Torx T8. I was going to pick one up at the hardware store (I don't own either) and I was wondering which size is better? Or perhaps it just doesn't matter?
View 6 Replies View RelatedI recently purchased a 13" Unibody MBP, with the 250gb HDD. Im looking to upgrade that to a 640GB HD, and I have been looking at newegg. They currently have 3-4 of them up there, and 2 of them (The WD and the Samsung) have reviews saying not to use it in the MBP, because the Hard Drive will constantly spin down and go to sleep.
View 9 Replies View Relatedmy MBP 17" back from 2007 initially came with 200GB 5400-rpm drive. I'd like to uprade it and can't really figure it out what's the maximum size and type of the drive I could fit into it now?
p.s. would you also reccomend to me upgrading to mountain lion, once it becomes available in the summer?
Info:
MacBook Pro, Mac OS X (10.5.8), Seagate Agent GoFlex 1.5TB
I'm looking to upgrade my internal hard drive, is there a limit on the size I can upgrade to? I have a 150G drive, and I'm running out of space. I'm thinking about going for the gold, and getting a 1T?
Info:
MacBook, Mac OS X (10.7.2), 2.2 GHz Intel Core 2 Duo-4G Ram
I want to know, is it possible to upgrade my MBP to this specs:
1) 16GB RAM (according to this [url] i can do this, but in settings said that MAC has limit of 8GB)
2) 1TB HDD
Info:
MacBook
Pro, Mac OS X (10.7.2), 17' 2,3GHz 750GB HDD
I have a Mid 2010 MacBook Pro with (upgraded) 8Gb ram and the original Toshiba 320GB, 5400rpm, 8mb, 2.5" SATA Hard drive, running Lion (upgraded through App store from Snow Leopard). I'm looking at getting a new Seagate Momentus XT 750GB, 7200rpm, 32mb, 2.5" with 8GB SSD built-in. I am fine with the hardware installation, though when I turn it on, as my original OS X was Snow Leopard, would I have to install that, then install Lion over it? Or is there an easier way of just installing Lion onto my new hard drive?
Info:
MacBook Pro, Mac OS X (10.7.2), 8GB RAM, Lion OSX.
I've download a Seagate Diagnostics programme to check whether my external Seagate FreeAgent Desk is working properly or not. However, when I run the programme, it indicates that cannot find the disk.
View -1 Replies View RelatedI have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
I have a Macbook Pro . The hard disk failed smart disk and my laptop does not start any more. Is it ok if I replace the HDD with CGET or WD hard disk rather than the apple hard disk. the pros and cons of a non apple HDD.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
I am trying to repair my mac. But in disk utility, the hard disk is not visible to proceed. Its showing disk0 -> volume with only 1.79GB. and all the options are disabled. The capacity of my mac book pro was 500GB.
Info:
MacBook Pro, OS X Mavericks (10.9)
Next year when snow leopard will be released I was thinking to upgrade my poor 60gb hard disk to something more probably to a 320 one, but I got one problem I lost my recovery disk and actually I don't really need it as you know Tiger is very stable.
When my old macbook will have inside the new hard disk do I need to reinstall tiger then upgrade it to snow leopard or I can directly install snow leopard?
In doing a fresh install of OS X Tiger on my emac, can it be done by a disk image of Tiger or do I have to use the CDs? Reason being the CD thingy is not working.
Or, do I have to sacrifice the fresh install and use a USB Drive to upgrade it?
Just a quick question to anyone that can answer. My warranty is up so it's time to upgrade the hard drive (Currently 120GB, 5400RPM) in my MBP. I just have one question. This is the HD I'm looking at putting in: [URL]. It's a Seagate Momentus 500GB 7200RPM drive. I just thought I'd ask if anyone here knew whether or not it will fit properly inside my lappy.
View 2 Replies View RelatedI have a Mid 2011 iMac and have been thinking about replacing the hard drive with an SSD drive. What sort of considerations should I be aware of? In particular: Is there a specific SSD technology I should be looking for (brand, connecter, etc.)?Can I use an SSD drive for the OS and the existing HD for additional storage? If so, whats the best way to separate the data (where do apps go, etc.)?Is it something that I can do myself or does it require taking it to a repair shop?How does it effect the warranty?
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.4)
I have a power mac G5 2.7 that is 2.5 years old. It came configured with two 400GB drives inside as it will only hold two. I now really want to change them out to either two 750 GB or preferably two 1TB drives. Apple, however, has told me it won't work and that my unit will not handle this huge additional power consumption. I have called mac mall and they say no way as well. OWC says they have many working like that and its never been a problem. Then I called Apple again and they said it will work fine. I have 6 more months of Apple care, but either way do not want to blow the interior of this system up. I know I need SATA drives and would ideally like to purchase the Hitachi Deskstar 7K1000.
Information:
Powermac G5
Mac OS X (10.4.3)
Few questions about this, what is the max harddrive and ram that can be put into it? and what is the latest OS that can be installed on it, I am currently running panther on it.
View 5 Replies View RelatedAfter upgrading to osx 10.9.3, my external hard drive was not able to mount, but it can be mounted without issue in osx 10.6, how do I solve it? it was formatted by disk utility.
View 14 Replies View RelatedI am considering purchasing diskwarrior but want to make sure it can help my situation before I purchase it. My imac will not boot from the internal hard drive (Intel processor) When I use disk utility to try and repair the disk, I get error messages and it won't repair. I can see the HD but cannot repair it. When I connect using target mode with my mac book pro, the hard drive does not appear on my host (macbook pro) computer. I have reloaded OS X (Leopard) onto a firewire external drive and can boot my imac that way but I can not find my original internal Macintosh HD. Will disk warrior be able to help with this scenario. I would really like to access that internal Macintosh HD and retrieve my files.
View 3 Replies View RelatedI have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
Recently I purchased an external hard disk, to put all of my pictures of my baby due to space limitations on my internal laptop drive. Since my Canon camera 10 megapixel pictures take up a ton of space this was occurring at an alarming rate. My intention was also to back up to DVD but never got to it. This is both a comment and a question.
Now said baby, is getting really good at pulling cords etc. He managed to do this on the external drive firewire cable. As far as i know the drive was not in the process of actually writing. However, after a few minutes and trying to re-plug the drive the OS crashed with a Grey Screen of Death hardware error that tells you that you need to push the power button..
This apparently corrupted the drive's directory. Upon reboot the drive would not mount. Since there were time machine backups on the drive too Diskwarrior was not able to reconstruct the drive in the built in memory available on the computer. Time machine stores millions of files and Diskwarrior apparently wants to keep it all in memory at once. Since my computer has 2GB you would hope that would be enough but apparently not. So that failed. Other utilities seemed to be able to find the files but not restore the directory. I also took it to the apple store they were not able to recover it.
I have to say this is extremely distressing, and hard to believe that a simple accident like this could cost the loss of thousands of pictures. I did send it to a rescue company but that was expensive but I think apple needs to do something about this situation.
On Windows there is a way to disable the write cache for external drives. This is not available for Mac OS X. This would prevent this rather common occurrence of a plug accidentally becoming disengaged when the drive is not in the process of writing. This reduces the odds but I still think apple, in order to become clearly superior, needs a better solution.
I know Apple has experimented with ZFS would this not eliminate this possibility of this kind of disaster? Is this in Snow Leopard desktop? I know they are thinking this is a business customer focused technology but clearly if it can eliminate this kind of thing then I think it is extremely useful to their non server customers. Perhaps there are other ways of dealing with this issue but ZFS is designed to deal with these issues. HFS+ is extremely fragile to disk corruption.
I know my situation is not that uncommon and this is not the first time this has happened to me with an external drive. You would think I had learned. I hate to think of how many other people have had the same thing happen to them.
Information:
MacBook Pro
Mac OS X (10.5.8)
I have 2 internal Serial-ATA disks:
Both were checked (with Disk Utility and DiskWarrior) and are OK. But only one of the two disks shows in the Startup Disk list in System Preferences->Startup Disk.
PowerMac G5 / OS X (V.10.4.11)
3GB memory
I have a 13" white macbook, which I had partitioned with Bootcamp. When I decided to upgrade to a 500 GB drive I didn't want to reinstall everything, so after ordering and installing my new harddrive, I used super duper to clone my mac volume onto the new drive. [URL]. It worked like a charm for the mac volume, but did not copy my windows volume. No problem, I figure, I will just run the boot camp assistant again, b/c I didn't have that much on that volume anyway. However when I booted up in my new 500 gb mac drive, the Boot Camp Assistant would not work and generated an error message stating. "The startup disk cannot be partitioned or restored to a single partition. Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
Only problem is, my drive was already formatted as an extended journaled volume. I erased it and reformatted and recloned from super duper just to double check, but still got the same error message. Then I tried to start from scratch, and erased the drive again and tried to install an operating system from the dvd. I got another error message saying that the hard drive could not be partitioned and that I needed to use disk utility to reformat the disk as a GUID partition. However I couldn't figure out how to do that, and couldn't find anything on the disk utility that said GUID. it took a call to mac support (thanks mark!) to figure it out. Thought I would post it here in case anyone else has the same problem. It turned out that the hard drive I'd ordered was somehow not set up the way as my old one.
The solution was:
1. boot from the mac os DVD
2. go into disk utility, select the new hard drive, and choose the partition tab
3. change the number of partitions from "current" to "1"
4. then the 'options' button becomes available, and you can go in and select to format as a GUID drive.
from that point on, I was able to proceed with installing Mac OS x, install all the software updates, and run the boot camp partition.
Once I had the hard drive partitioned properly I used Super Duper to clone my mac volume onto the new drive, and then used Winclone to clone the windows drive. for some reason the main site for winclone is down right now - two canoes - but I got a working copy here: [URL] none of the help info on two canoes was available yesterday or today either so I had a little trouble figuring out how to use it. (though others have said it's super easy...). I wasn't sure where to save the disk image, on a mac or windows volume and on my old or new drive. The way I ended up doing it (that worked) was:
1. open winclone, and in the 'image' tab, create an image and save it on the mac volume of the new hard drive. (I couldn't save it on the old drive b/c there wasn't enough room)
2. then, still in winclone, go to the 'restore' screen and restore from the mac volume of the internal hard drive to the windows volume.
Since upgrading to Mac OS X 10.7.4 I am unable to mount any of my G-Tech Raid hard drives.
Info:
iMac, Mac OS X (10.7.4)
