Just a quick question to anyone that can answer. My warranty is up so it's time to upgrade the hard drive (Currently 120GB, 5400RPM) in my MBP. I just have one question. This is the HD I'm looking at putting in: [URL]. It's a Seagate Momentus 500GB 7200RPM drive. I just thought I'd ask if anyone here knew whether or not it will fit properly inside my lappy.
View 2 RepliesI have a Mac Book Pro core duo with a partition running windowsXP pro. The hard drive is almost completely full. I want to replace the drive with a larger drive and clone the current drive. Is there a way to completely clone the drive complete with the partition, boot camp, windows etc? I'm running mac os 10.4.11
View 3 Replies View RelatedI want to upgrade my hard drive from 320GB 5400 rpm to 320GB 7200 rpm.
Are there any models that you would recommend over the official Mac brand?
Also do you recommend that I attempt to do the installation myself, or pay someone else to do it?
i have a macbook MB881LL/A. i want to replace the hard drive. It is only 120gb. how big can i go and what type do i need?
Info:
MacBook, Mac OS X (10.6.4)
I have a Mid 2011 iMac and have been thinking about replacing the hard drive with an SSD drive. What sort of considerations should I be aware of? In particular: Is there a specific SSD technology I should be looking for (brand, connecter, etc.)?Can I use an SSD drive for the OS and the existing HD for additional storage? If so, whats the best way to separate the data (where do apps go, etc.)?Is it something that I can do myself or does it require taking it to a repair shop?How does it effect the warranty?
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.4)
How safe is it to upgrade a 2011 MacBook Pro to a SSD? What are the advantages and disadvantages and does it harm or hurt the overall performance of a computer. All of the same questions but with upgrading my RAM
Info:
MacBook Pro, Mac OS X (10.7.4)
my mid 2009 MacBook Pro 15". I have bought new RAM and a new SSHD. I would like to take ONLY the important files from the old hard drive and basically start the new SSHD from scratch. how to install the original operating system on the new SSHD and then move the old files onto my "new" computer.
View 8 Replies View RelatedI have a 500 gig hard drive that was given to me that I'd like to put in it but I'm worried about voiding the warranty. I've looked up replacing it and it seems simple.
View 3 Replies View RelatedI am happy to say that I love my new MacBook I bought a couple weeks ago, but since I bought the white entry level for my first Mac, I have been trying to find some kind of useful info on what internal hard drives will be compatible with it. I only have the 120 GB model but I want to expand to a 500 GB or 320 if I can't get a 500 that will fit. Is there anyone out there can recommend a compatible drive? I found one at micro center (link below) but am not sure it will fit. I don't mind paying this for the drive, I just am not familiar if it will cause issues with the power, make more noise, etc. [URL]
View 5 Replies View RelatedI'm upgrading my HD on my Macbook, I read that you need a Torx T9 and I also read a place that suggested a Torx T8. I was going to pick one up at the hardware store (I don't own either) and I was wondering which size is better? Or perhaps it just doesn't matter?
View 6 Replies View RelatedI recently purchased a 13" Unibody MBP, with the 250gb HDD. Im looking to upgrade that to a 640GB HD, and I have been looking at newegg. They currently have 3-4 of them up there, and 2 of them (The WD and the Samsung) have reviews saying not to use it in the MBP, because the Hard Drive will constantly spin down and go to sleep.
View 9 Replies View Relatedmy MBP 17" back from 2007 initially came with 200GB 5400-rpm drive. I'd like to uprade it and can't really figure it out what's the maximum size and type of the drive I could fit into it now?
p.s. would you also reccomend to me upgrading to mountain lion, once it becomes available in the summer?
Info:
MacBook Pro, Mac OS X (10.5.8), Seagate Agent GoFlex 1.5TB
I have a power mac G5 2.7 that is 2.5 years old. It came configured with two 400GB drives inside as it will only hold two. I now really want to change them out to either two 750 GB or preferably two 1TB drives. Apple, however, has told me it won't work and that my unit will not handle this huge additional power consumption. I have called mac mall and they say no way as well. OWC says they have many working like that and its never been a problem. Then I called Apple again and they said it will work fine. I have 6 more months of Apple care, but either way do not want to blow the interior of this system up. I know I need SATA drives and would ideally like to purchase the Hitachi Deskstar 7K1000.
Information:
Powermac G5
Mac OS X (10.4.3)
Few questions about this, what is the max harddrive and ram that can be put into it? and what is the latest OS that can be installed on it, I am currently running panther on it.
View 5 Replies View RelatedI'm looking to upgrade my internal hard drive, is there a limit on the size I can upgrade to? I have a 150G drive, and I'm running out of space. I'm thinking about going for the gold, and getting a 1T?
Info:
MacBook, Mac OS X (10.7.2), 2.2 GHz Intel Core 2 Duo-4G Ram
I want to know, is it possible to upgrade my MBP to this specs:
1) 16GB RAM (according to this [url] i can do this, but in settings said that MAC has limit of 8GB)
2) 1TB HDD
Info:
MacBook
Pro, Mac OS X (10.7.2), 17' 2,3GHz 750GB HDD
I have a Mid 2010 MacBook Pro with (upgraded) 8Gb ram and the original Toshiba 320GB, 5400rpm, 8mb, 2.5" SATA Hard drive, running Lion (upgraded through App store from Snow Leopard). I'm looking at getting a new Seagate Momentus XT 750GB, 7200rpm, 32mb, 2.5" with 8GB SSD built-in. I am fine with the hardware installation, though when I turn it on, as my original OS X was Snow Leopard, would I have to install that, then install Lion over it? Or is there an easier way of just installing Lion onto my new hard drive?
Info:
MacBook Pro, Mac OS X (10.7.2), 8GB RAM, Lion OSX.
After upgrading to osx 10.9.3, my external hard drive was not able to mount, but it can be mounted without issue in osx 10.6, how do I solve it? it was formatted by disk utility.
View 14 Replies View RelatedI have a 13" white macbook, which I had partitioned with Bootcamp. When I decided to upgrade to a 500 GB drive I didn't want to reinstall everything, so after ordering and installing my new harddrive, I used super duper to clone my mac volume onto the new drive. [URL]. It worked like a charm for the mac volume, but did not copy my windows volume. No problem, I figure, I will just run the boot camp assistant again, b/c I didn't have that much on that volume anyway. However when I booted up in my new 500 gb mac drive, the Boot Camp Assistant would not work and generated an error message stating. "The startup disk cannot be partitioned or restored to a single partition. Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
Only problem is, my drive was already formatted as an extended journaled volume. I erased it and reformatted and recloned from super duper just to double check, but still got the same error message. Then I tried to start from scratch, and erased the drive again and tried to install an operating system from the dvd. I got another error message saying that the hard drive could not be partitioned and that I needed to use disk utility to reformat the disk as a GUID partition. However I couldn't figure out how to do that, and couldn't find anything on the disk utility that said GUID. it took a call to mac support (thanks mark!) to figure it out. Thought I would post it here in case anyone else has the same problem. It turned out that the hard drive I'd ordered was somehow not set up the way as my old one.
The solution was:
1. boot from the mac os DVD
2. go into disk utility, select the new hard drive, and choose the partition tab
3. change the number of partitions from "current" to "1"
4. then the 'options' button becomes available, and you can go in and select to format as a GUID drive.
from that point on, I was able to proceed with installing Mac OS x, install all the software updates, and run the boot camp partition.
Once I had the hard drive partitioned properly I used Super Duper to clone my mac volume onto the new drive, and then used Winclone to clone the windows drive. for some reason the main site for winclone is down right now - two canoes - but I got a working copy here: [URL] none of the help info on two canoes was available yesterday or today either so I had a little trouble figuring out how to use it. (though others have said it's super easy...). I wasn't sure where to save the disk image, on a mac or windows volume and on my old or new drive. The way I ended up doing it (that worked) was:
1. open winclone, and in the 'image' tab, create an image and save it on the mac volume of the new hard drive. (I couldn't save it on the old drive b/c there wasn't enough room)
2. then, still in winclone, go to the 'restore' screen and restore from the mac volume of the internal hard drive to the windows volume.
Alright I have a current rev Mini 1.83ghz, and want to upgrade the stock 80gb HD, wondering if this drive will work. [URL]. I want the 7200RPM, but wasn't sure 3.0GB would work on the intel controller, thinking it may only support 1.5GB. Also, when I reinstall leopard, does it allow me to format the drive to HFS+ or how would I do this?
View 4 Replies View RelatedI upgraded to osx 10.7.4 today and now my iMac cant find the HD I have connected to my airport.
View 1 Replies View RelatedWill upgrading the hard drive void the warranty?
View 6 Replies View RelatedI am upgrading my Macbook PRO to 1TB hard disk and as I understand, there are only 2 of those 2,5 inch on the market. I wanted to ask you guys to help me choose which one to pick. [URL:....]
View 3 Replies View RelatedToday I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
Got a new MBP last month to replace my white MacBook - loving it as an upgrade but one gripe - if I'm sat using it on my knee I regularly hear the "click" type noise of what I imagine is the protection of the hard drive because it thinks it is being dropped.
I never heard this on my old Mac and while it's not a huge issue it is a bit disconcerting, as though I'm being told off for moving it in a fairly responsible way.
My PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
How do i play media files from my external hard drive without transferring the files to my mac hard drive? I have a lot of media files and want to be able to play them soley from my external hard drive.
Info:
iMac (27-inch Mid 2011), iOS 5.1.1
Since upgrading to Mac OS X 10.7.4 I am unable to mount any of my G-Tech Raid hard drives.
Info:
iMac, Mac OS X (10.7.4)
My PM G5's Hard Drive has been making wierd noises lately and I'm really beginning to worry that it's failing. How can I be sure?
View 1 Replies View RelatedI have an aluminum unibody macbook from October 2008. I'm looking to upgrade the 160 GB hard drive inside to a 500 GB one I'm considering from Newegg. Would it be possible to migrate/copy/clone the entire contents of my current hard drive to the 500 GB one? I also have a section of my current hard drive partitioned for Bootcamp. Would this affect my ability to transfer everything over?
If this is possible at all, how can I go about doing so? If there are steps laid out somewhere, I'd appreciate a referral. Sorry if my question is a little elementary, but I did a search on these forums and also google and nothing really came up
