MacBook Pro :: Kernel Panic - Does Not Boot Anymore?
Jun 30, 2012
I got a friend and they are owner of an old MacBook pro aluminum 15 inch with intel core 2 duo.But now the problem. It doesn't boot anymore and you will see this:And then The circkel thing (I don't know the name in English haha) stops and I see the message that I have to re-boot the mac again. I tried serveral things. I tried to boot up the OSX cd but it doesn't work. Safe mode doesn't work. Nothing works. Does anybody know what the problem is?
Info:
MacBook
Pro, Mac OS X (10.7.2)
View 5 Replies
ADVERTISEMENT
Mar 9, 2008
Yesterday my screen (30" Apple Cinema) started showing symptoms of graphics card failure, jagged lines across the screen. I rebooted my Mac Pro and it was gone. Then it happened again an hour later, this time the machine didn't boot, I get the Apple logo, and then it hangs up and the screen is shifted to left (I get apple logo on left side of the monitor instead of the middle) and jagged lines all over.
So the first thing I tested was using Target Disk Mode, it works. I can access my Mac Pro's internal HD's by TDM from my MacBook Pro. Then I tested single user mode, it does boot, I can't read what's written since the screen is shifted to left, but if I type (without seeing) reboot and hit enter, it reboots. So I assume the single user mode is working.
What else can I try to 100% make sure it's my graphics card that failed and everything else is ok with Mac Pro? I already ordered a graphics card replacement but I wouldn't like to be surprised if the Mac Pro still doesn't boot when the card arrives. It won't boot from Apple Startup DVD either. Same thing happens, gray logo then kernel panic with jagged lines all across the shifted screen.
View 21 Replies
View Related
Nov 10, 2010
my name is SPC Sanders. I am a forward observer currently deployed to Afghanistan. I've owned a Macbook Pro for a couple of years.
About three weeks ago, I made the stupid mistake of attempting to run iOSX so I could dual boot with Windows 7 (all stuff I acquired while I was home on midtour leave.) The install seemed to be ok, however, I noticed immediately I could not make any changes to settings as my administrator password was no longer working. (Administrator is my only account on this laptop.)
At fear of losing my operability, I simply did not power down for that whole time. However, I recently moved bases, and alas, the time came to power down.
Upon bootup, I get a constant spinning wheel. I left this on for a couple of hours just to be sure, then realized it was a lost cause. I tried booting in safe mode, and I got some kernel panic. It says a bunch of stuff about debugger calling the panic, bla bla bla, but the thing that caught my eze was Mac OS version not set yet.
After booting in safe mode, getting that error, and powering off, my laptop will boot into a grezish blueish lightblueish (alternating) type of screen, which sometimes has the spinning wheel, sometimes not. Again, nothing.
I understand I will probably need my OS disc to fix this, but I didn't bring it with me. Am I SOL?
View 7 Replies
View Related
Oct 2, 2009
Yesterday my screen (30" Apple Cinema) started showing symptoms of graphics card failure, jagged lines across the screen. I rebooted my Mac Pro and it was gone. Then it happened again an hour later, this time the machine didn't boot, I get the Apple logo, and then it hangs up and the screen is shifted to left (I get apple logo on left side of the monitor instead of the middle) and jagged lines all over.
So the first thing I tested was using Target Disk Mode, it works. I can access my Mac Pro's internal HD's by TDM from my MacBook Pro. Then I tested single user mode, it does boot, I can't read what's written since the screen is shifted to left, but if I type (without seeing) reboot and hit enter, it reboots. So I assume the single user mode is working.
What else can I try to 100% make sure it's my graphics card that failed and everything else is ok with Mac Pro? I already ordered a graphics card replacement but I wouldn't like to be surprised if the Mac Pro still doesn't boot when the card arrives.
P.S. It won't boot from Apple Startup DVD either. Same thing happens, gray logo then kernel panic with jagged lines all across the shifted screen.
View 7 Replies
View Related
Feb 15, 2009
I have an iMac that I bought in October 2007. All of a sudden, when I try to boot up my computer, I get a kernel panic. Can't get any further than the kernel panic even though I keep on re-booting.
View 4 Replies
View Related
Jul 21, 2009
I am a network adminstrator (for a windows network ) but personnally an Apple User. I am savy with linux and unix enough to get around etc, so my knowledge is broad and indepth.I have never had issues with my own Macs in the past 5 years, but my friends MacBook has an interesting issue.She told me that the computer was doing updates, and she didnt want to wait for it to finish and just shut it off in the middle of some OSX updates.
View 2 Replies
View Related
Nov 16, 2009
I moved over to an IMac from windows about 2 years ago and have never had any issues, until now. Whenever I boot my IMac I get a 'kernel panic' message (grey screen with 'you need to restart your computer in 4 languages). I cannot boot from my Mac HD, nor from a bootable superduper backup external HD, nor from my orginal SL or Leopard disk. All go into the kernel panic. I can however boot from my bootcamp Windows Vista partition. Tried booting into safe mode also does not work and gives the kernel panic screen. I have run both the standard and extended hardware tests and both have no errors. I booted in single user mode (that still works)and done a fcsk and unmount and both are without errors. Also done RAM flash. In single user modei can not find a PanicReporter directory or panic log. Cannot even install a fresh SL copy as my DVD wont boot either.
View 3 Replies
View Related
Dec 10, 2009
Recently my 2-year old iMac (20inch (2Ghz, 320GB, 4GB RAM, OSX Leopard) has been crashing every day. The way to temporally "fix" the kernel panic is to restart the machine and boot into the instal disc, and run the disk utility (repair permissions, then repair disk). If I do not run the disk utility daily, the computer will begin crashing again over and over. Below you'll find the the crash data (which is always the same):
Interval Since Last Panic Report: 0 sec
Panics Since Last Report: 1
Anonymous UUID: A60F4F7D-F369-40E4-96F1-F2810273F105
BSD process name corresponding to current thread: kextd
Mac OS version:
9L31a
Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
System model name: iMac7,1 (Mac-F4238CC8)
System uptime in nanoseconds: 15150601001
unloaded kexts: (none)
I honesty don't know what to do to stop the crashing (other than runing disk utility every day). This is never happened before now.
View 4 Replies
View Related
Apr 21, 2010
Yesterday I was helping someone getting to know their MacBook Pro (early 2008, Intel core 2 duo 2.4GHz, Mac OS X 10.5.2). I installed Perian and Flip4Mac and Firefox 3.6. I also checked for updates because she's on a very old version. I tried downloading the updates, but because we had a very bad internet connection I stopped the download quite early on and told her to do it at home. However after I left she tried to shut down the computer but it hanged. She manually shut it down using the power button. When she tried to turn it on again she got a kernel panic message saying she should reboot. This however didn't work.
Now I've tried all sorts of things. I've removed Perian and Flip4Mac manually. I did a disk verification (all was well) and a permissions verification and repair. I tried booting in safe mode (still won't boot) clearing the SMC and resetting PRAM, none of it worked. I just wanted to check here first before either taking it to an Apple store or reinstalling Mac OS X. I've read on forums about hardware failing (RAM mostly). No idea if that's the case. I tried a hardware test, but I don't have her DVDs and used my own with version 10.5.5. The Standard test said it was all ok, but the extended test seemed to hang. I could ask for her own DVDs which I will need anyway if I'm going to reinstall Mac OS X.
Some details of the kernel panic:
The error code is: 0x000000010
Apart from that it says the following:
Backtrace terminated-invalid frame pointer 0
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleIntelCPUPowerManagement(76.2.0)@0x2e63c000->0x2e65afff
And later on it says: Mac OS version: Not yet set.
And of course it shows some more info with lots of hex codes, I can type them out for you if you like, but I read elsewhere that the error message is usually not very useful. Would you recommend going to an Apple store to see if the RAM is faulty? Or do a reinstall of Mac OS X?
View 2 Replies
View Related
Apr 23, 2012
Ever since I've got this iMac on the office, I've got the occasional kernel panics. At first they seemed to redeem themselfs during runtime, but for a while now, they seem to pop up at boot. And I mean, even not getting the Apple logo and it already freezes. I seem to be having this problem only in a frequency of say... once in two months or so?
Today I got it again and it even occured two times in a row, third time the system booted up. I would like to know whats up, I figure this must be a hardware issue since the system doesn't even load up. I'm a bit worried about sending this machine for it's warranty, since I won't have a machine for like 3 weeks until it gets back...
Here's the kernel panic:
Interval Since Last Panic Report: 274968 sec
Panics Since Last Report: 2
Anonymous UUID: 26D2C9E5-2CDA-4386-AEEC-A21012A8C927
Tue Apr 24 08:06:35 2012
[code].....
Info:
iMac (27-inch Mid 2010), Mac OS X (10.7.3)
View 1 Replies
View Related
Apr 20, 2012
What can I do when my computer doesn't boot and it appears a message "panic kernel"?
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7)
View 5 Replies
View Related
Sep 24, 2009
I've got a Powermac G5 desktop. I recently purchased a used keyboard for it off of Ebay. The computer was working fine with just a mouse. Shortly after the keyboard was plugged in, I got a kernel panic, and had to restart. I restarted, and immediately got a message saying "you need to restart your computer", and followed by another kernel panic.
Now, I get a kernel panic and "restart your computer" message, even if the keyboard is unplugged.
I was planning to do a clean install of OS X anyway, and figured that since the computer is completely useless at this point, now would be a pretty good time to go ahead and do it. So I tried to boot from the install CD by inserting the CD and holding down the 'C' key. No result -- it doesn't show me the "boot menu", and instead proceeds as usual, to it's "Restart your computer" message and subsequent kernel panic.
So I then tried rebooting and holding down the "Option" key, and managed to get to the boot menu. I selected "Mac OS X Install Disc 1" and clicked the "--->" button ... kernel panic again.
I'm at a complete loss for what to do next. Any help with this would be much appreciated. All I want to do is reinstall OS X.
How can there be a kernel panic from the boot CD? Apple didn't make it where it tries to use the kernel from disk during install did they?
I'm coming from a Linux background, and am not at all familiar with OS X, so forgive me if I've left information out that I should have included. Please let me know if this is the case, and I'll do what I can to provide it for you.
View 3 Replies
View Related
Dec 5, 2009
Mac G5 ppc OSX10.4.11
Starting up from any boot disk will give me a kernel panic forcing me to hard restart.
Background:
After many freezes I ran disk utility and I get:
Checking Catalog file.
Invalid index key
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
So I use my wife's Imac startup disk to boot it in order to repair but I get the dreadfull death screen (I know how to press the C) I'm thinking maybe it's because her disk if for her Intel proc so I go and buy a copy of disk warrior 4, and same problem.
View 4 Replies
View Related
Nov 26, 2010
For the past few days (never happened before) my apps started crashing continuously and kernel panic screen started appearing very frequently. I am still wondering what may be the cause of it, then I tested my RAM with Rember, and this log showed up:
Memtest version 4.22 (64-bit)
Copyright (C) 2004 Charles Cazabon
Copyright (C) 2004-2008 Tony Scaminaci (Macintosh port)
Licensed under the GNU General Public License version 2 only
View 3 Replies
View Related
Nov 29, 2009
I did a quick search through the forum and didn't see anything specific about this problem. It just started to occur yesterday and nothing has changed on the computer. (Nothing new installed and no external hardware plugged in.)
Basically, it just pops up with the grey screen advising to restart. Sometimes it occurs after waking from sleep, sometimes it occurs after starting up, and sometimes it occurs in the middle of a task. I haven't noticed a specific pattern.
I ran the AHT and everything passed. I also ran Rember and the memory seemed fine in the test. I reset the PRAM and VRAM and the SMC after speaking with Apple. Finally, I reinstalled the OSX clean on the machine and the panics are still occurring.
This is the last panic report from the Macbook 1,1 2.0 with 1.25 GB RAM. I'm hoping it is the RAM and not something with the logic board, but am not sure if that can be ascertained without finding replacement RAM first.
View 2 Replies
View Related
May 22, 2012
My computer had problems with display, track pad, not powering up, and lots of parts were replaced in January (MacBook Pro purchased 12.31.09). Got it home, after a while constant kernal panics. tried everything, brought it into Apple store yesterday, ran diagnostics, hard disk repaired, seemed OK.
Shortly after I came home it happened again. I repaired permissions, did verify disk, no problems with disk. Updated software, including went to Java and Adobe and updated them. Nothing works. Now the permissions note lots of problems with Remote Management (one of the updates from yesterday, 5.21) and Java (yesterday too). MacBook Pro OS X 10.6.8, would like to go to Lion but don't want to until my machine is stable?
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.6.8)
View 2 Replies
View Related
Jan 4, 2009
I'm running a PowerBook G4 and I have recently run into some problems with kernel panic. I have bought and installed new ram, zapped the pram, and re-written the hard drive and I still have problems. The weird thing is, the computer only crashes when I move it. If I just sit still then it works fine, but if I move it from my lap to a table or something like that then I get the restart message. I have an appointment with the Geek bar tomorrow
View 8 Replies
View Related
Aug 21, 2009
I'm having a weird problem with a 15" I bought in February (2009). I can boot up fine into the OS without any problems. But when I try to boot from the reinstallation CD to do a clean install, I keep getting a kernel panic. (And yes, I do need to do a clean install.)
View 2 Replies
View Related
May 8, 2012
I've been experiencing recurring kernel panics for at least a month now and I seem to have narrowed down the issue to the RAM. Now I'm just not sure whether it's corrupt kernel files associated with the RAM or the actual hardware itself. I've run the extended apple hardware test and the error message I recieve (within 5 seconds) is that the error is with the file 4MEM/1/40000000:0x84938218 I've downloaded memtest and run that within terminal. Funny thing about that is as soon as I type "memtest all" my macbook kernel panics almost immediately. Something about the "memory lock-up" phase".
Other than that my computer works fine as long as I don't run too many applications at once. Often times video streaming or opening too many tabs in a web browser will do it. And you can forget about running games that will kernel panic almost immediately. here's an example of the logs I've been getting. It's not the most recent but they all say the same thing-I've checked. Interval Since Last Panic Report:
81752 secPanics Since Last Report: 16Anonymous UUID: 4C3B52DD-8029-42B8-8DFC-8E8A297DBE3A Fri Apr 27 21:26:55 2012panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff8000202e44, type 14=page fault, registers:CR0: 0x0000000080010033, CR2: 0x0000008000000008, CR3: 0x000000004de24000, CR4: 0x0000000000040660RAX: 0x0000000000000000, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000008000000000RSP: 0xffffff805ebfbd50, RBP: 0xffffff805ebfbd90, RSI:
[code]....
Info:
MacBook Pro, Mac OS X (10.6.8)
View 1 Replies
View Related
May 15, 2012
Unfortunately, I've installed the latest update 10.7.4 from apple. Since I've upgraded I had 8 Kernel panics happening sometimes without even touching the macbook pro.this is the latest kernel panic report :
Interval Since Last Panic Report: 33787 sec
Panics Since Last Report: 2
Anonymous UUID: D509E77E-1936-47EB-9C95-EAA0CEC13E11
[code]....
Info:
MacBook Pro, Mac OS X (10.7.4)
View 7 Replies
View Related
May 23, 2012
My mac air usually appear kernel panic. what the happen with my mac?
Info:
MacBook Air, Mac OS X (10.7.4)
View 7 Replies
View Related
Jun 5, 2012
My MacPro keeps having kernel panic (4x in a week, then none in almost 2 weeks, then comes back again today) even when everything is updated. And I recognize that I always get the kernel panic only when I visit this one website where I usually go to stream an online movie. What could be wrong with my Mac? Is there a way to stop and/or prevent future kernel panic attack?
Info:
MacBook Pro, Mac OS X (10.6.8), around 2y.o
View 3 Replies
View Related
Jun 14, 2012
I recently purchased a mid-2012 MacBook Pro (15-inch, 2.3 GHz, non-retina) and I have been receiving Kernel Panic error messages. The screen goes black with white text in multiple languages warning me to shut down my computer and the computer freezes. I have called Apple customer service multiple times. We tried multiple things, including wipe the hard drive and reinstall OS X Lion, but I still get Kernel Panics. One thing I did notice in the "send to Apple" report is that it mentions Google Chrome. It seems whenever I do get a Kernel Panic I am using Chrome. Here are the applications I have installed (besides the default Apple ones):Coda 2Final Cut Pro XTwitterGoogle Chrome Right now, as suggested by the second Apple associate, I uninstalled Google Chrome, to see if that was the cause. She says that it could be related to that or from a software update (which I doubt considering I have yet to install any updates since I reinstalled Lion).
View 14 Replies
View Related
Jun 15, 2012
I've purchased my first MacBook air. This is the second crash it had in two days. The first one occured when I was watching a youtube video and the second one happened while closing Chrome (while watching a youtube video). Should I go back to the store or can I fix this myself? [code]
Info:
MacBook Air, Mac OS X (10.7.4), mid-2012
View 14 Replies
View Related
Oct 15, 2010
I have read a million different posts, forums and most places people wouldn't want to go. This Mac is being very stubborn.
I have tried booting to safe mode, running the install disk, tried to load the utility on the install disk even tried a copy of diskwarrior (but I am not sure if it was a bootable copy).
In almost every instance the machine tries to load the cd and then spits it out and I get the restart screen. A few times I get the install to load but then it takes me to a screen that says something like �startup� run or install from these device after reboot, or something to that effect.
I even tried the command, option p r. If I just hit option with no disk it will list the mac hd. The machine is about 5 years old and is running osx 10.4.1?
This isn�t my machine so I can�t answer many questions about the OS. I was given a Snow Leopard 10.5 disk that appears to have been open.
View 3 Replies
View Related
May 28, 2009
I've noticed this happening for the past few weeks. Basically if I'm watching video on any flash website like YouTube, and I plug in headphones, I get a kernel panic. So as normal I hold the power button to shut it off. However, when I turn it back on, it will beep 2 times, then 3 times, and continue to beep until I turn it off. When I power it on again, it won't beep but it sits on the blank screen before the Apple logo shows up and basically nothing happens and my fans start to go loud. I did this about 3 times before it loaded to the Apple logo loading screen and finally booted properly. After it crashed I removed the headphones, and nothing except the magsafe charger is plugged in.
View 8 Replies
View Related
Jun 29, 2009
I have a uMB 2.4 GHZ. Bluetooth has always been fickle on this computer (jumpy mouse), but tonight when I turned bluetooth on from the menu bar as I was about to use the computer from clamshell mode hooked up to my TV, I got my first kernel panic on this MacBook.
I am curious if it is a software issue with bluetooth or hardware. Can anyone make anything from the log?
View 1 Replies
View Related
Aug 6, 2009
My husband's mac book started acting weird while I was out own town. He was unable to get it to start up, but eventually did, backed up his important data, and then I had him attempt to verify and repair permissions. I guess it indicated there were errors but could not fix them. Once again, his macbook stalls at start up and will not get past the gray screen with the apple and the wheel. Last night at this point it kernel panicked.
Today (since I'm back now) I tried to boot it in safe mode, and it still hangs. I zapped the PRAM, and that didn't help. My next step is to try and boot from his install discs, when he finds them. My question is, should I bother trying to verify and repair, or should I just do an archive & install (if possible) or an erase and install (if necessary)? This is a mac book from 06-ish running 10.4.? My hubby claims to not have installed or updated anything recently.
View 3 Replies
View Related
Mar 15, 2010
I have a MBP, it had a flickering screen (graphics card), so I got it fixed under warranty, then about a month after the fix, the MBP refused to wake - I took it back again and it was fixed.
Now the MBP is experiencing repeated kernel panics - especially after the any system update - there were a few recently.
The only solution seems to be switching the machine off and letting it cool.
View 6 Replies
View Related
Mar 19, 2010
A MacBook air that I just got up and running again after replacing the hinges along with the whole top half of the computer. I did a clean install of snow leopard, and was so happy to be using the air again.
After changing some settings and loading a couple off apps in my room with the lights off (so I could see the backlit keyboard), I flipped on the light switch in my room, and was immediatly shown the the kernel panic screen, and was forced to shut down.
I figured this was just a random occurance, so I booted back up, but was in kernel panic as soon as snow leopard booted. Went through this a couple more times, then shut the lights in my room back off, rebooted, and was able to boot up just fine. I then took a flashlight and ran the beam across the ambient light sensor, next to the camera, and was instantly in kernel panic again.
After saying WTF for a while I decided to swap the camera/ALS/mic board over from my old screen bc I figured maybe this new one is just bad. But this resulted in more of the same. I then did a new fresh and clean snowleopard install, but about 5 mins after finishing the install, it went right back to the good old kernel panic screen.
Now I don't really know where to go from here. The computer is way out of warranty, and after what I was quoted from my local apple repair store to repair the hinges and screen that I just fixed, I think I would just get nauseous at the thought of having to bring it to them now.
View 4 Replies
View Related
